BP2500G1008AT BAND PASS FILTER SPECIFICATION Rev. A PRODUCT FEATURES 1. Surface mount band pass filter with a small size of 2.50 X 2.0 X 0.9 mm, RoHS compliant. 2. Provide low insertion loss, and high rejection rate. 3. Highly stable under temperature and humidity changes. RF CHARACTERISTICS PHYSICAL DIMENSIONS P/N BP2500G1008AT Frequency range Insertion Loss Specification 2400 - 2500 MHz 2.1 dB max. at +25°C 2.3 dB max. -40°C to +85°C Symbol Dimension (mm) VSWR 2.0 max L 2.50 ± 0.20 Impedance 50 Ω W 2.00 ± 0.20 T 0.90 ± 0.10 Attenuation (min.) 43dB @ 806 - 960 MHz 43dB @ 1570 -1580 MHz 43dB @ 1710 - 1990 MHz 20dB @ 2110 - 2170 MHz 30dB @ 4800 - 5000 MHz 25dB @ 7200 - 7500 MHz A 1.70 ± 0.20 B 0.60 ± 0.20 C 0.30 ± 0.20 -40°C to +85°C D 0.40 ± 0.10 E, H 0.15 ± 0.10 F 0.60 ± 0.10 G 0.50 ± 0.10 Operating temperature range TERMINAL CONFIGURATION Frontier Electronics Corp.® http://www.frontierusa.com Terminal Connection P1 Input P2 Ground P3 Output P4 Ground Page 1 of 2 667 E. Cochran St., Simi Valley, CA 93065 Phone: 1-805-522-9998, Fax: 1-805-522-9989 BP2500G1008AT BAND PASS FILTER SPECIFICATION Rev. A PCB DESIGN/LAYOUT CONSIDERATION Note: - Design trace width to be 50 impedance. Typical RF Performance Frontier Electronics Corp.® http://www.frontierusa.com Page 2 of 2 667 E. Cochran St., Simi Valley, CA 93065 Phone: 1-805-522-9998, Fax: 1-805-522-9989