BP5900B0805DT BAND PASS FILTER SPECIFICATION Rev. A PRODUCT FEATURES 1. Surface mount band pass filter with a small size of 2.0 X 1.25 X 0.95 mm, RoHS compliant. 2. Provide low insertion loss and high rejection rate. 3. Highly stable under temperature and humidity changes. RF CHARACTERISTICS PHYSICAL DIMENSIONS Symbol Dimension (mm) 1.8 dB max. at 25°C L 2.00 ± 0.15 2.1 dB max. -40°C to +85°C W 1.25 ± 0.10 VSWR 2.0 max T 0.95 ± 0.10 Impedance 50 Ω A 1.30 ± 0.15 30 dB @ 500 MHz B 0.30 ± 0.15 C 0.35 ± 0.15 20 dB @ 4200 MHz D 0.25 ± 0.15 15 dB @ 9800 MHz E 0.25 ± 0.10 P/N BP5900B0805DT Specification 4900- 5850 MHz Frequency range Insertion Loss (max) 35 dB @ 3450 MHz 30 dB @ 4000 MHz Attenuation (min.) 15 dB @ 11700 MHz Operating temperature range -40°C to +85°C TERMINAL CONFIGURATION P1 P4 P3 Connection 1 INPUT 2 GND 3 OUTPUT 4 GND P2 Frontier Electronics Corp.® http://www.frontierusa.com PIN Page 1 of 2 667 E. Cochran St., Simi Valley, CA 93065 Phone: 1-805-522-9998, Fax: 1-805-522-9989 BP5900B0805DT BAND PASS FILTER SPECIFICATION Rev. A PCB DESIGN/LAYOUT CONSIDERATION Note: - Design trace width to be 50Ω impedance. Typical RF Performance 0 -10 dB(S(2,1)) dB(S(1,1)) -20 -30 -40 -50 -60 -70 0 1 2 3 4 5 6 7 8 9 10 11 12 freq, GHz Frontier Electronics Corp.® http://www.frontierusa.com Page 2 of 2 667 E. Cochran St., Simi Valley, CA 93065 Phone: 1-805-522-9998, Fax: 1-805-522-9989