RoHS SMD SHIELDED POWER CHIP INDUCTOR Dimensions: .079±.008 (2.0±0.2) .040 Max (1.02 Max) PCSV24 Inches (mm) Magnetic Shielded .031 (0.8) .098±.008 (2.5±0.2) X .031 (0.8) Allied Part Number PCSV24-1R0M-RC PCSV24-1R5M-RC PCSV24-2R2M-RC PCSV24-3R3M-RC PCSV24-4R7M-RC PCSV24-5R6M-RC PCSV24-6R8M-RC PCSV24-150M-RC PCSV24-220M-RC Inductance Tolerance (µh) (%) Test Freq. 1MHz, 200mV 1.0 1.5 2.2 3.3 4.7 5.6 6.8 10 22 20 20 20 20 20 20 20 20 20 1 1 1 1 1 1 1 1 1 Features RDC (mΩ) ±30% Isat (mA) Typ. Irms (mA) Typ. Marking 0.093 0.148 0.178 0.286 0.421 0.481 0.598 0.797 1.839 2200 1900 1620 1220 1040 920 2200 1800 1680 1340 1020 940 880 820 520 A B C D E F G H I 900 740 500 All specifications subject to change without notice. • Magnetically Shielded Construction • Ultra Low Profile Electrical Inductance Range: 1.0µh ~ 220µh (other values being added) Tolerance: Available in 20% an 30% tolerances Operating Temp: -25ºC ~ +105ºC Isat: Current at which the Inductance will drop by no more then 30% of its initial value. Irms: Based on a temp rise of ∆ T = 40ºC typical at 25ºC ambient. Resistance to Soldering Heat Pre-Heat 150ºC, 1 Min. Solder Composition: Sn/Ag3.0/Cu0.5 Solder Temp: 260ºC +/- 5ºC for 10 sec Test Equipment (L): HP4287A + Agilent/HP16197A, 1MHz 200mV (RDC): Chroma MilliOhm Meter Mode 16502 Current: Agilent/HP4284A 1MHz 200mV Physical Packaging: 2K per Tape and reel Marking: As indicated 714-665-1140 ALLIED COMPONENTS INTERNATIONAL 4/18/11 15 www.alliedcomponents.com