RoHS SMD SHIELDED POWER CHIP INDUCTOR Dimensions: .157±.008 (4.0±0.2) PCSV48 Inches (mm) .071±.008 (1.8±0.2) .051±.012 (1.3±0.3) .157±.008 (4.0±0.2) .051±.012 (1.3±0.3) .142 typ. (3.6 typ.) Allied Part Number PCSV48-1R0T-RC PCSV48-1R5T-RC PCSV48-2R2M-RC PCSV48-2R3M-RC PCSV48-3R3M-RC PCSV48-3R6M-RC PCSV48-3R9M-RC PCSV48-4R7M-RC PCSV48-6R8M-RC PCSV48-100M-RC PCSV48-150M-RC PCSV48-220M-RC PCSV48-330M-RC PCSV48-470M-RC PCSV48-680M-RC PCSV48-101M-RC PCSV48-151M-RC PCSV48-221M-RC Inductance Tolerance (µh) (%) Test Freq. Khz, 1V 1.0 1.5 2.2 2.3 3.3 3.6 3.9 4.7 6.8 10 15 22 33 47 68 100 150 220 30 30 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 RDC (mΩ) ±20% Isat (A) Typ. Irms (A) Typ. Marking 32 40 60 60 70 75 75 90 110 170 250 350 530 720 1000 1500 2500 4000 4.1 3.3 2.8 2.8 2.2 2.1 2.1 2.0 1.6 1.4 1.0 0.9 0.8 0.7 .56 .46 .35 .28 2.8 2.6 2.5 2.5 2.1 1.9 1.9 1.7 1.5 1.2 1.0 .85 .70 .56 .45 .38 .30 .23 1R0 1R5 2R2 2R3 3R3 3R6 3R9 4R7 6R8 100 150 220 330 470 680 101 151 221 Features • Magnetically Shielded Construction • Ultra Low Profile Electrical Inductance Range: 1.0µh ~ 220µh (other values being added) Tolerance: Available in 20% and 30% tolerances Operating Temp: -40ºC ~ +105ºC Isat: Current at which the Inductance will drop by no more then 30% of its initial value. Irms: Based on a temp rise of ∆ T = 40ºC typical at 25ºC Ambient. Resistance to Soldering Heat Pre-Heat 150ºC, 1 Min. Solder Composition: Sn/Ag3.0/Cu0.5 Solder Temp: 260ºC +/- 5ºC for 10 sec Test Equipment All specifications subject to change without notice. (L): Agilent/HP4284A + Agilent/HP16334A (RDC): Chroma MilliOhm Meter Mode16502 Current: Isat: HP4284A + HP42841A Irms: Agilent 6641 System DC Power Supply Physical Packaging: 800 per Tape and reel Marking: EIA Inductance Code 714-665-1140 ALLIED COMPONENTS INTERNATIONAL REVISED 15 06/06/12 www.alliedcomponents.com