RoHS PCSV65 SMD SHIELDED POWER CHIP INDUCTOR Dimensions: .177 Max (4.5 Max) .236±.008 (6.0±0.2) .059 Typ. (1.5 Typ.) XXX .236±.008 (6.0±0.2) Inches (mm) .059 Typ. (1.5 Typ.) Allied Part Number Inductance (µh) Tolerance (%) Test Freq. KHz, 1V RDC m(Ω) ±30% Isat (A) Typ. Irms (A) Typ. PCSV65-1R0T-RC PCSV65-1R8T-RC PCSV65-2R3T-RC PCSV65-3R0T-RC PCSV65-4R5T-RC PCSV65-6R8M-RC PCSV65-100M-RC PCSV65-150M-RC PCSV65-220M-RC PCSV65-330M-RC PCSV65-470M-RC PCSV65-680M-RC PCSV65-101M-RC 1.0 1.8 2.3 3.0 4.5 6.8 10 15 22 33 47 68 100 30 30 30 30 30 20 20 20 20 20 20 20 20 100 100 100 100 100 100 100 100 100 100 100 100 100 12 17 19 22 31 43 57 80 125 165 245 330 500 12.2 9.6 8.8 7.8 6.7 5.3 4.5 3.4 3.0 2.3 1.9 1.6 1.3 6.5 5.6 5.0 4.4 3.9 3.2 2.7 2.2 1.9 1.4 1.2 1.0 0.8 All specifications subject to change without notice. Features • Magnetically Shielded Construction • Low Profile Electrical Inductance Range: 1.0uh ~ 100uh (other values being added) Tolerance: Available in 20% and 30% Operating Temp: -25ºC ~ +105ºC Isat: Current at which the Inductance will drop by no more then 30% of its initial value. Irms: Based on a temp rise of ∆ T = 40ºC typical. Resistance to Soldering Heat Pre-Heat 150ºC, 1 Min. Solder Composition: Sn/Ag3.0/Cu0.5 Solder Temp: 260ºC +/- 5ºC for 10 sec Test Equipment (L): HP4284A (RDC): Chroma MilliOhm Meter 16502 Current: HP4284A + HP42841A Physical Packaging: 1K per Tape and reel Marking: EIA Inductance Code. Land Pattern .224 (5.7) .063 (1.6) .122 (3.1) .063 (1.6) 714-665-1140 ALLIED COMPONENTS INTERNATIONAL REVISED 15 10/08/10 www.alliedcomponents.com