RoHS SMD SHIELDED POWER CHIP INDUCTOR Dimensions: .197±.008 (5.0±0.2) PCSV52 Inches (mm) .079±.008 (2.0±0.2) .071±.012 (1.8±0.3) .197±.008 (5.0±0.2) .071±.012 (1.8±0.3) .157 typ. (4.0 typ.) Allied Part Number PCSV52-1R0T-RC PCSV52-1R5T-RC PCSV52-2R2T-RC PCSV52-3R3M-RC PCSV52-4R7M-RC PCSV52-6R8M-RC PCSV52-100M-RC PCSV52-150M-RC PCSV52-220M-RC Inductance Tolerance (µh) (%) Test Freq. Khz, 1V 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 30 30 30 20 20 20 20 20 20 100 100 100 100 100 100 100 100 100 RDC (mΩ) ±20% Isat (A) Typ. Irms (A) Typ. Marking 21 26 35 48 60 90 120 190 260 5.1 4.2 3.4 3.0 2.2 2.0 1.6 1.3 1.0 4.0 3.5 3.2 2.8 2.2 1.8 1.6 1.2 1.0 1R0 1R5 2R2 3R3 4R7 6R8 100 150 220 All specifications subject to change without notice. Features • Magnetically Shielded Construction • Ultra Low Profile Electrical Inductance Range: 1.0µh ~ 22µh (other values being added) Tolerance: Available in 20% and 30% Tolerance as noted. Operating Temp: -25ºC ~ +105ºC Isat: Current at which the Inductance will drop by no more then 30% of its initial value. Irms: Based on a temp rise of ∆ T = 40ºC typical at 25ºC Ambient. Resistance to Soldering Heat Pre-Heat 150ºC, 1 Min. Solder Composition: Sn/Ag3.0/Cu0.5 Solder Temp: 260ºC +/- 5ºC for 10 sec Test Equipment (L): Agilent/HP4284A + Agilent/HP16334A (RDC): Chroma MilliOhm Meter Mode 16502 Current: Isat: HP4284A + HP42841A Irms: Agilent 6641 System DC Power Supply Physical Packaging: 2000 per Tape and reel Marking: EIA Inductance Code 714-665-1140 ALLIED COMPONENTS INTERNATIONAL REVISED 15 06/06/12 www.alliedcomponents.com