Product Change Notices PCN No.: 20070201 Date: 02/13/2007 This is to inform you that a design and process change will be made to the following product(s). This notification is for your information and concurrence. If you require data or samples to qualify this change, please contact AME, Inc. within 30 days of receipt of this notification. If we do not receive any response from you within 30 calendar days from the date of this notification, we will consider that you have accepted this PCN. If you have any questions concerning this change, please contact: PCN Originator: Name: Amy Shen Email: [email protected] Expected 1st Device Shipment Date: 2/13/2007 Earliest Year/Work Week of Changed Product: 0705 Description of Change (From): Foundry UMC Description of Change (To): Foundry Magnachip Reason for Change: To increase capability for AME8500 series. QPM018A-A Qual/REL Plan Numbers: REL-AD1221-A-A Qualification: TEST ITEM METHOD DESCRIPTION Result VHBM≧2kV and VMM≧200V minimum. Set Max ESD (HBM / MM) MIL-STD-883F 3015.7 VHBM= 8kV and Max VMM= 800V to find out the Accept terminal. 10ms, ITR ≧ 100mA minimum. Set 500mA Accept Latch-Up JESD 78 HTOL (Burn-in) MIL-STD-883F 1005.8 125℃, 1000 hours with Bias Accept High Temp. Storage MIL-STD-883F 1008.2 150℃, 1000 hours Accept TCT MIL-STD-883F 1010.8 -65℃ ~ 150℃, 500 cycles Accept THT (85/85) JESD-22-B, A101 PCT JESD-22-B, A102 SOLDERABILITY MIL-STD-883F 2003.8 maximum to find out the terminal. 85℃, 85% RH, 1000 hours, without Bias Check leakage current at 168hrs time point. 121℃, 100% RH, 15PSIG, 168 hours Accept Accept Leaded plating: 245℃, 5sec Lead-free plating: 260℃, 5sec Accept QPM018A-A