Final Product/Process Change Notification Document # : FPCN21083X Issue Date: 6 October 2015 Title of Change: NCP1654 Multiplier Output Current change. Proposed first ship date: 13 January 2016 Contact information: Contact your local ON Semiconductor Sales Office or Petr Valek <[email protected]> Samples: Contact your local ON Semiconductor Sales Office Additional Reliability Data: Contact your local ON Semiconductor Sales Office or Petr Valek <[email protected]>. Type of notification: This is a Final Product/Process Change Notification (FPCN) sent to customers. FPCNs are issued 90 days prior to implementation of the change. ON Semiconductor will consider this change accepted, unless an inquiry is made in writing within 30 days of delivery of this notice. To do so, contact <[email protected]>. Change Part Identification: Affected products will be identified with date code WW52 2015 Change category: Wafer Fab Change Change Sub-Category(s): Manufacturing Site Change/Addition Manufacturing Process Change Sites Affected: All site(s) not applicable Assembly Change Test Change Other _______________ Datasheet/Product Doc change Material Change Product specific change Shipping/Packaging/Marking Other: _______________________ ON Semiconductor site(s) : External Foundry/Subcon site(s) Description and Purpose: This is a Final Notice to announce that Datasheet parameter Multiplier Output Current of IM2 will be changed to the following specification: IM2 Multiplier Output Current(Vcontrol=Vcontrol(max), VBO=0.9 V, ICS=75 uA) (0~125°C) 1.5 4.7 8.8 (-40~125°C) 1.5 4.7 9.8 Electrical Characteristic Summary: Device specification changes can be found in section “Description and purpose”. List of Affected Standard Parts: Part Number TEM001092 Rev. E Qualification Vehicle NCP1654BD65R2G N/A NCP1654BD133R2G N/A NCP1654BD200R2G N/A Page 1 of 1