AM SERIES 1 Watt Surface Mount DC/DC Converter Single Output Rev B FEATURES • • • • • • Small Footprint • High Power Density • Industry Standard Pinout • Cooling by Free Air Convention Short Circuit Protection SMT Package 1,000VDC Isolation MTBF > 1 Million Hours Efficiency up to 80% RoHS Compliant APPLICATIONS • High Speed Pick Machine Operation • Place Machine Operation • Low Power Applications Size: 0.5in x 0.30in x 0.25in (12.7 x 7.6 x 6.25mm) DESCRIPTION The AM series of DC DC converters provides up to 1 watt of output power in a compact 0.5” x 0.30” x 0.25” frame. This series consists of single output models with outputs ranging from 3.3~15VDC. Each model has high power density as well as industry standard pinout. This series is useful in high speed pick and place machine operation and other low power applications. Models are RoHS compliant and have high efficiency up to 80%. MODEL SELECTION TABLE Model Number Input Voltage Output Voltage Output Current 5VDC 5VDC 5VDC 5VDC 5VDC 5VDC 12VDC 12VDC 12VDC 12VDC 3.3VDC 5VDC 9VDC 12VDC 15VDC 3.3VDC 5VDC 9VDC 12VDC 15VDC 303mA 200mA 110mA 84mA 67mA 303mA 200mA 110mA 84mA 67mA AM503-303N AM505-200N AM509-110N AM512-84N AM515-67N AM1203-303N AM1205-200N AM1209-110N AM1212-84N AM1215-67N Ripple & Noise Output Power 100mVp-p 1W 100mVp-p 1W Load Regulation(1) Efficiency 15% Typ. 15% Max. 9% Max. 7.5% Max. 7% Max. 15% Typ. 15% Max. 9% Max. 7.5% Max. 7% Max. 65% 70% 75% 78% 80% 65% 70% 75% 78% 80% SPECIFICATIONS All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS INPUT SPECIFICATIONS Input Voltage Range Input Filter OUTPUT SPECIFICATIONS Output Voltage Voltage Tolerance Line Regulation Load Regulation Output Power Output Current Ripple & Noise Transient Response Setting Time PROTECTION Short Circuit Protection ENVIRONMENTAL SPECIFICATIONS Operating Case Temperature Humidity Cooling MTBF 1/21/2016 Min 5 Typ 12 Capacitor See Table ±5 1.2 See Table See Table See Table 100 350 For 1% of Vin DC to 20MHz Bandwidth 50% load step change Short Term 1 -40 Non-Condensing Max +85 95 Free Air Convection 3500000 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Unit VDC % % mVp-p us Sec. ºC % Hours Page 1 of 4 AM SERIES 1 Watt Surface Mount DC/DC Converter Single Output Rev B SPECIFICATIONS All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS Min GENERAL SPECIFICATIONS Efficiency Typ Max Unit See Table Switching Frequency Full Load, Nominal Input Isolation Resistance PHYSICAL SPECIFICATIONS Weight 500VDC 100 KHz 1000 MΩ 0.04oz (1g) Typ. 0.5in x 0.3in x 0.25in (12.7mm x 7.6mm x 6.25mm) DAP Dimensions (L x W x H) Case Material NOTES (1) (2) Load regulation measured 10%-100% F.L. Specifications subject to change without notice. DERATING CURVES Temperature Derating 1/21/2016 Tolerance Envelope Graph Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 2 of 4 AM SERIES 1 Watt Surface Mount DC/DC Converter Single Output Rev B RECOMMENDED TEST CIRCUIT MECHANICAL DRAWINGS PIN Connection PIN Single 1/21/2016 1 -Vin 3 +Vin 7 -Vout 8 +Vout Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] 14 NC Page 3 of 4 Rev B AM SERIES 1 Watt Surface Mount DC/DC Converter Single Output COMPANY INFORMATION Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008 certification is just one example of our commitment to producing a high quality, well-documented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone: Toll Free: Fax: E-mail: Web: Address: 1/21/2016 (603)778-2300 (888)597-9255 (603)778-9797 [email protected] www.wallindustries.com 37 Industrial Drive Exeter, NH 03833 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 4 of 4