DTA200 SERIES 200 Watt AC/DC Desktop Power Supply Single Output Rev C FEATURES • • • • • • • IEC-320-C14 AC Inlet • Safety Approvals, EMC Compliance • 40 mm Cooling Fan with Fan Speed Control • Meets DOE Level VI and EU Tier 1 Efficiency Requirements Class I High Reliability Universal Input 100% Hi-Pot Tested 100% Burn-In Tested Short Circuit, Over Load, and Over Voltage Protected DESCRIPTION The DTA200 series of AC/DC desktop power supplies offers 200 watts of output power in a 7.42” x 4.1” x 2.36” package. This series consists of single output models with an universal input of 90-264VAC. Each model in this series has high reliability and is protected against short circuit, over load, and over voltage conditions. This series has been 100% hi-pot and burn-in tested. Size: 7.42in x 4.1in x 2.36in (188.5mm x 104.5mm x 60mm) MODEL SELECTION TABLE Model Number Input Voltage Range Output Voltage 90-264VAC 12V 16V 19V 20V 24V 36V 48V DTA-200A3-1Y12E DTA-200A3-1Y16E DTA-200A3-1Y19E DTA-200A3-1Y20E DTA-200A3-1Y24E DTA-200A3-1Y36E DTA-200A3-1Y48E Output Current Ripple & Noise 16.66A 12.50A 10.53A 10A 8.33A 5.555A 4.166A 240mVp-p 300mVp-p 300mVp-p 300mVp-p 300mVp-p 300mVp-p 300mVp-p Output Power Output Regulation Efficiency Level 200W 200W 200W 200W 200W 200W 200W ±5% ±5% ±5% ±5% ±5% ±5% ±5% VI VI VI VI VI VI VI SPECIFICATIONS All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS INPUT SPECIFICATIONS Input Voltage Range Input Frequency Inrush Current Input Current (rms) Typ Max Unit 90 264 VAC 47 63 65 130 3 1.5 Hz @115VAC cold start @ 25ºC @230VAC cold start @ 25ºC @90VAC @264VAC OUTPUT SPECIFICATIONS Output Voltage Output Regulation Output Power Output Current Ripple & Noise (20MHz bandwidth)(1) Hold-Up Time @Full Load, 115VAC PROTECTION Short Circuit Protection Over Load Protection Over Voltage Protection ENVIRONMENTAL SPECIFICATIONS Operating Case Temperature Derates linearly 2.5% per ºC from 51to 70ºC Storage Temperature Humidity MTBF @Full Load and 25ºC ambient temperature 2/5/2016 Min -5 See Table +5 200 See Table See Table >16 A peak A % W ms Automatic Recovery Automatic Recovery Shutdown and Latch Off, AC Recycle 0 -20 10 100,000 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] +70 +85 90 ºC ºC % hours Page 1 of 3 DTA200 SERIES 200 Watt AC/DC Desktop Power Supply Single Output Rev C SPECIFICATIONS All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS GENERAL SPECIFICATIONS Efficiency Power Factor No Load Power Consumption Earth Leakage Current PHYSICAL SPECIFICATIONS Weight @Average load, 115/230VAC @115VAC @230VAC @Full Load Min Typ Max Unit 88 0.95 0.90 % % 210 228 @264VAC mW uA 2.07lbs (0.94kgs) 7.42in x 4.1in x 2.36in (188.5mm x 104.5mm x 60mm) IEC 320-C14 Inlet Dimensions (L x W x H) AC Inlet SAFETY & EMC CHARACTERISTICS UL60950-1 CSA C22.2-No. 60950-1 TUV EN60905-1 CB IEC 60950-1 FCC CISPR22 EN55022 CE Safety Approvals EMC Class B Class B Class B NOTES (1) Ripple & Noise is measured at 200MHz bandwidth with a tantalum 10uF in parallel with a 0.1uF ceramic capacitor. MECHANICAL DRAWINGS 2/5/2016 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 2 of 3 Rev C DTA200 SERIES 200 Watt AC/DC Desktop Power Supply Single Output COMPANY INFORMATION Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008 certification is just one example of our commitment to producing a high quality, well-documented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone: Toll Free: Fax: E-mail: Web: Address: 2/5/2016 (603)778-2300 (888)597-9255 (603)778-9797 [email protected] www.wallindustries.com 37 Industrial Drive Exeter, NH 03833 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 3 of 3