MIMMF200N120DA MIMMF200N120DK 1200V 200A FRED Module RoHS Compliant PRODUCT FEATURES Ultrafast Reverse Recovery Time Soft Reverse Recovery Characteristics Low Reverse Recovery Loss Low Forward Voltage High Surge Current Capability Low Inductance Package APPLICATIONS Inversion Welder Uninterruptible Power Supply (UPS) Plating Power Supply Ultrasonic Cleaner and Welder Converter & Chopper Power Factor Correction (PFC) Circuit ABSOLUTE MAXIMUM RATINGS Symbol Parameter TC=25°C unless otherwise specified Test Conditions Values Unit VR Maximum D.C. Reverse Voltage 1200 V VRRM Maximum Repetitive Reverse Voltage 1200 V TC=75°C, Per Diode 100 A TC=75°C, Per Moudle 200 A TC=85°C, 20KHz, Per Moudle 150 A RMS Forward Current TC=75°C, Per Diode 150 A Non-Repetitive Surge TJ=45°C, t=10ms, 50Hz, Sine 1100 A Forward Current TJ=45°C, t=8.3ms, 60Hz, Sine 1200 A TJ=45°C, t=10ms, 50Hz, Sine 6050 A2 s TJ=45°C, t=8.3ms, 60Hz, Sine 7200 A2 s 280 W IF(AV) IF(RMS) IFSM Average Forward Current I2t I2t (For Fusing) PD Power Dissipation TJ Junction Temperature -40 to +150 °C TSTG Storage Temperature Range -40 to +125 °C Visol Insulation Test Voltage AC, t=1min 3000 V Torque Module-to-Sink Recommended(M5) 2.5~4 N·m Torque Module Electrodes Recommended(M5) 2.5~4 N·m RθJC Thermal Resistance Junction-to-Case 0.44 °C /W 100 g Weight MIMMF200N120DA MIMMF200N120DK ELECTRICAL CHARACTERISTICS Symbol Parameter TC=25°C unless otherwise specified Test Conditions Min. Typ. Max. Unit VR=1200V -- -- 1 mA VR=1200V, TJ=125°C -- -- 20 mA IF=100A -- -- 1.77 V IF=100A, TJ=125°C -- -- 1.6 V IRM Reverse Leakage Current VF Forward Voltage trr Reverse Recovery Time IF=1A, VR=30V, diF/dt=-200A/μs -- 35 -- ns trr Reverse Recovery Time VR=600V, IF=100A -- 150 -- ns IRRM Max. Reverse Recovery Current diF/dt=-200A/μs, TJ=25°C -- 28 -- A trr Reverse Recovery Time VR=600V, IF=100A -- 250 -- ns IRRM Max. Reverse Recovery Current diF/dt=-200A/μs, TJ=100°C -- 47 -- A 200 350 VR=600V TJ =100°C 300 160 120 trr (ns) IF (A) 250 TJ =125°C 80 TJ =25°C 0 0.5 IF=100A IF=50A 60 VR=600V TJ =100°C 20 3 400 600 1000 800 diF/dt(A/μs) Figure3. Reverse Recovery Current vs diF/dt IF=200A 9 6 200 200 12 40 0 0 400 600 800 1000 diF/dt(A/μs) Figure2. Reverse Recovery Time vs diF/dt 15 IF=200A 80 0 18 VR=600V TJ =100°C Qrr (μc) IRRM (A) 100 IF=50A 50 1 1.5 2.5 2 VF(V) Figure1. Forward Voltage Drop vs Forward Current 120 IF=100A 150 100 40 0 0 200 IF=200A 0 IF=100A IF=50A 0 200 400 600 800 1000 diF/dt(A/μs) Figure4. Reverse Recovery Charge vs diF/dt MIMMF200N120DA MIMMF200N120DK 2 1 1.6 10-1 Kf ZthJC (K/W) 1.2 0.8 0.4 0.0 10-2 Duty 0.5 0.2 0.1 0.05 Single Pulse 10-3 IRRM trr Qrr 0 25 50 100 125 150 75 TJ (°C) Figure5. Dynamic Parameters vs Junction Temperature -4 10 10-4 10-3 10-2 10-1 1 Rectangular Pulse Duration (seconds) Figure6. Transient Thermal Impedance Dimensions (mm) Figure7. Package Outline