MIMMF2X100J120D 1200V 100A FRED Module RoHS Compliant PRODUCT FEATURES Ultrafast Reverse Recovery Time Soft Reverse Recovery Characteristics Low Reverse Recovery Loss High System Power Density Popular SOT-227 Package APPLICATIONS Inversion Welder Uninterruptible Power Supply (UPS) Plating Power Supply Ultrasonic Cleaner and Welder Converter & Chopper Power Factor Correction (PFC) Circuit ABSOLUTE MAXIMUM RATINGS Symbol Parameter TC=25°C unless otherwise specified Test Conditions Values Unit VR Maximum D.C. Reverse Voltage 1200 V VRRM Maximum Repetitive Reverse Voltage 1200 V TC=90°C, Per Diode 100 A TC=90°C, Per Moudle 200 A TC=90°C, 20KHz, Per Moudle 120 A RMS Forward Current TC=90°C, Per Diode 141 A Non-Repetitive Surge TJ=45°C, t=10ms, 50Hz, Sine 1450 A Forward Current TJ=45°C, t=8.3ms, 60Hz, Sine 1600 A TJ=45°C, t=10ms, 50Hz, Sine 10512 A2s TJ=45°C, t=8.3ms, 60Hz, Sine 12800 A2s 278 W IF(AV) IF(RMS) IFSM Average Forward Current I2 t I2t (For Fusing) PD Power Dissipation TJ Junction Temperature -40 to +150 °C TSTG Storage Temperature Range -40 to +125 °C Visol Insulation Test Voltage AC, t=1min 3000 V Torque Module-to-Sink Recommended（M4） 0.7～1.1 N·m Torque Module Electrodes Recommended（M4） 0.7～1.1 N·m RθJC Thermal Resistance Junction-to-Case 0.45 °C /W 26.5 g Weight MIMMF2X100J120D ELECTRICAL CHARACTERISTICS Symbol Parameter TC=25°C unless otherwise specified Test Conditions Min. Typ. Max. Unit VR=1200V -- -- 0.5 mA VR=1200V, TJ=125°C -- -- 2 mA IF=100A -- 1.6 -- V IF=100A, TJ=125°C -- 1.38 -- V IRM Reverse Leakage Current VF Forward Voltage trr Reverse Recovery Time IF=1A, VR=30V, diF/dt=-200A/μs -- 50 -- ns trr Reverse Recovery Time VR=600V, IF=100A -- 135 -- ns IRRM Max. Reverse Recovery Current diF/dt=-200A/μs, TJ=25°C -- 10 -- A trr Reverse Recovery Time VR=600V, IF=100A -- 380 -- ns IRRM Max. Reverse Recovery Current diF/dt=-200A/μs, TJ=125°C -- 21 -- A 600 200 500 400 120 trr (ns) IF (A) 160 TJ =125°C 80 TJ =25°C 100 0 1.8 1.2 2.0 1.6 VF（V） Figure1. Forward Voltage Drop vs Forward Current 100 0.4 0.8 IF=100A IF=50A 0 400 600 800 1000 diF/dt（A/μs） Figure2. Reverse Recovery Time vs diF/dt 200 VR=600V TJ =125°C 10 8 60 IF=200A IF=100A 40 IF=50A 20 Qrr (μc) IRRM (A) IF=200A 12 VR=600V TJ =125°C 80 0 0 300 200 40 0 0 VR=600V TJ =125°C IF=200A 6 IF=100A IF=50A 4 2 400 600 1000 800 diF/dt（A/μs） Figure3. Reverse Recovery Current vs diF/dt 200 0 0 200 400 600 800 1000 diF/dt（A/μs） Figure4. Reverse Recovery Charge vs diF/dt MIMMF2X100J120D 1.4 10 1.2 1 ZthJC (K/W) 1.0 Kf 0.8 0.6 IRRM 0.4 0 10-2 trr 0.2 10-1 Duty 0.5 0.2 0.1 0.05 Single Pulse Qrr 0 25 50 100 125 150 75 TJ (°C) Figure5. Dynamic Parameters vs Junction Temperature 10-3 -4 -1 10 10-3 10-2 10 1 Rectangular Pulse Duration (seconds) Figure6. Transient Thermal Impedance Dimensions (mm) Figure7. Package Outline