HMC635


Design Assistance

Customised Pack Sizes / Qtys

Assembly Assistance

Support for all industry recognised
supply formats:

Die handling consultancy

Hi-Rel die qualification

Hot & Cold die probing

Electrical test & trimming
o Waffle Pack
o Gel Pak
o Tape & Reel

Onsite storage, stockholding &
scheduling

100% Visual Inspection
o MIL-STD 883 Condition A
o MIL-STD 883 Condition A

On-site failure analysis

Bespoke 24 Hour monitored
storage systems for secure long
term product support

On-site failure analysis
Contact
[email protected]
For price, delivery and to place orders
HMC635
www.analog.com
www.micross.com
Analog Devices Welcomes
Hittite Microwave Corporation
NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
www.analog.com
www.hittite.com
THIS PAGE INTENTIONALLY LEFT BLANK
HMC635
v00.1107
DRIVER & GAIN BLOCK AMPLIFIERS - CHIP
2
GaAs PHEMT MMIC DRIVER
AMPLIFIER, 18 - 40 GHz
Typical Applications
Features
The HMC635 is ideal for:
Gain: 19.5 dB
• Point-to-Point Radios
P1dB: +23 dBm
• Point-to-Multi-Point Radios & VSAT
Output IP3: +29 dBm
• LO Driver for Mixers
Saturated Power: +24 dBm @ 15% PAE
• Military & Space
Supply Voltage: +5V @ 280 mA
50 Ohm Matched Input/Output
Die Size: 1.95 x 0.84 x 0.10 mm
Functional Diagram
General Description
The HMC635 is a GaAs PHEMT MMIC Driver
Amplifier die which operates between 18 and 40 GHz.
The amplifier provides 19.5 dB of gain, +29 dBm
Output IP3, and +23 dBm of output power at 1 dB
gain compression, while requiring 280 mA from a +5V
supply. Ideal as a driver amplifier for microwave radio
applications, or as an LO driver for mixers operating
between 18 and 40 GHz, the HMC635 is capable of
providing up to +24 dBm of saturated output power at
15% PAE. The amplifier’s I/Os are DC blocked and
internally matched to 50 Ohms making it ideal for
integration into Multi-Chip-Modules (MCMs). All data
is taken with die connected at input and output RF
ports via two 1 mil wedge bonds of 500μm length.
Electrical Specifi cations, TA = +25° C, Vdd1, 2, 3, 4 = +5V, Idd= 280mA
Parameter
Min.
Frequency Range
Gain
Typ.
Max.
Min.
18 - 36
16
Gain Variation Over Temperature
19.5
0.045
16
0.060
[1]
Typ.
Max.
36 - 40
GHz
19
dB
0.045
0.050
dB/ °C
Input Return Loss
15
9
dB
Output Return Loss
13
12
dB
Output Power for 1 dB Compression (P1dB)
19
Saturated Output Power (Psat)
Output Third Order Intercept (IP3)
23
14
24
24
Noise Figure
Supply Current (Idd1 + Idd2 + Idd3 + Idd4)
29
21
19
dBm
20
dBm
27
dBm
8
7
dB
280
280
mA
[1]Adjust Vgg1 = Vgg2 between -2 to 0V to achieve Idd= 280 mA Typical.
2 - 58
Units
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC635
v00.1107
GaAs PHEMT MMIC DRIVER
AMPLIFIER, 18 - 40 GHz
Broadband Gain & Return Loss
Gain vs. Temperature
25
32
20
28
2
S11
S21
S22
5
0
-5
-10
20
16
12
+25 C
+85 C
-55 C
8
-15
4
-20
-25
0
10
15
20
25
30
35
40
45
16
50
18 20 22
FREQUENCY (GHz)
24 26 28
30
32 34 36
38 40
42
FREQUENCY (GHz)
Input Return Loss vs. Temperature
Output Return Loss vs. Temperature
0
0
-6
+25 C
+85 C
-55 C
-5
+25 C
+85 C
-55 C
-4
RETURN LOSS (dB)
RETURN LOSS (dB)
-2
-8
-10
-12
-14
-10
-15
-20
-16
-18
-25
16
18 20 22
24 26 28
30
32 34 36
38 40
42
16
18 20 22
FREQUENCY (GHz)
25
24
24
23
23
Psat (dBm)
26
25
22
21
20
19
38 40
42
38 40
42
22
21
20
19
+25 C
+85 C
-55 C
17
32 34 36
Psat vs. Temperature
26
18
30
FREQUENCY (GHz)
P1dB vs. Temperature
P1dB (dBm)
24 26 28
DRIVER & GAIN BLOCK AMPLIFIERS - CHIP
24
10
GAIN (dB)
RESPONSE (dB)
15
+25 C
+85 C
-55 C
18
17
16
16
16
18 20 22
24 26 28
30
32 34 36
FREQUENCY (GHz)
38 40
42
16
18 20 22
24 26 28
30
32 34 36
FREQUENCY (GHz)
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
2 - 59
HMC635
v00.1107
GaAs PHEMT MMIC DRIVER
AMPLIFIER, 18 - 40 GHz
Power Compression @ 30 GHz
Pout (dBm), GAIN (dB), PAE (%)
Pout (dBm), GAIN (dB), PAE (%)
30
Pout (dBm)
Gain (dB)
PAE (%)
25
20
15
10
5
0
-15
-10
-5
0
20
15
10
5
0
-15
10
-10
0
5
10
Noise Figure vs. Temperature
40
15
36
NOISE FIGURE (dB)
12
32
IP3 (dBm)
-5
INPUT POWER (dBm)
Output IP3 vs. Temperature
28
24
+25 C
+85 C
-55 C
20
9
6
+25 C
+85 C
-55 C
3
0
16
16
18 20 22
24 26 28
30
32 34 36
38 40
42
16
18 20 22
24 26 28
30
32 34 36
38 40
42
FREQUENCY (GHz)
FREQUENCY (GHz)
Gain & Power vs. Supply Voltage @ 30 GHz
Reverse Isolation vs. Temperature
0
26
-10
ISOLATION (dB)
24
Gain
P1dB
Psat
22
20
+25 C
+85 C
-55 C
-20
-30
-40
-50
18
-60
16
4.5
-70
4.6
4.7
4.8
4.9
5
Vdd (V)
2 - 60
5
Pout (dBm)
Gain (dB)
PAE (%)
25
INPUT POWER (dBm)
GAIN (dB), P1dB (dBm), Psat (dBm)
DRIVER & GAIN BLOCK AMPLIFIERS - CHIP
2
Power Compression @ 40 GHz
30
5.1
5.2
5.3
5.4
5.5
16
18 20 22
24 26 28
30
32 34 36
FREQUENCY (GHz)
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
38 40
42
HMC635
Absolute Maximum Ratings
Drain Bias Voltage
(Vdd1, Vdd2, Vdd3, Vdd4)
+5.5 Vdc
Gate Bias Voltage (Vgg1,Vgg2)
-3 to 0 Vdc
RF Input Power (RFIN)(Vdd = +5 Vdc)
15 dBm
Channel Temperature
175 °C
Continuous Pdiss (T= 85 °C)
(derate 16.16 mW/°C above 85 °C)
1.45 W
Thermal Resistance
(channel to die bottom)
61.87 °C/W
Storage Temperature
-65 to +150 °C
Operating Temperature
-55 to +85 °C
GaAs PHEMT MMIC DRIVER
AMPLIFIER, 18 - 40 GHz
Typical Supply Current vs. Vdd
Vdd (V)
Idd (mA)
4.5
277
5.0
280
5.5
286
Note: Amplifi er will operate over full voltage ranges shown above
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
2
DRIVER & GAIN BLOCK AMPLIFIERS - CHIP
v00.1107
2 - 61
HMC635
v00.1107
GaAs PHEMT MMIC DRIVER
AMPLIFIER, 18 - 40 GHz
Outline Drawing
DRIVER & GAIN BLOCK AMPLIFIERS - CHIP
2
NOTES:
1. ALL DIMENSIONS ARE IN INCHES [MM]
2. DIE THICKNESS IS .004”
3. TYPICAL BOND IS .004” SQUARE
4. BACKSIDE METALLIZATION: GOLD
5. BOND PAD METALLIZATION: GOLD
6. BACKSIDE METAL IS GROUND.
7. CONNECTION NOT REQUIRED FOR UNLABELED BOND PADS.
Die Packaging Information [1]
Standard
Alternate
GP-2 (Gel Pack)
[2]
[1] Refer to the “Packaging Information” section for die
packaging dimensions.
[2] For alternate packaging information contact Hittite
Microwave Corporation.
2 - 62
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC635
v00.1107
GaAs PHEMT MMIC DRIVER
AMPLIFIER, 18 - 40 GHz
Pad Descriptions
Function
Description
1
RFIN
This pad is AC coupled
and matched to 50 Ohms.
2, 3, 4, 5
Vdd1, Vdd2, Vdd3,
Vdd4
Power Supply Voltage for the amplifier. See assembly
diagram for required external components.
6
RFOUT
This pad is AC coupled
and matched to 50 Ohms.
7, 8
Vgg2, Vgg1
Gate control for amplifier, please follow “MMIC Amplifier
Biasing Procedure” application note. See assembly diagram for required external components.
Die Bottom
GND
Die bottom must be connected to RF/DC ground.
Interface Schematic
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
2
DRIVER & GAIN BLOCK AMPLIFIERS - CHIP
Pad Number
2 - 63
HMC635
v00.1107
GaAs PHEMT MMIC DRIVER
AMPLIFIER, 18 - 40 GHz
Assembly Diagram
DRIVER & GAIN BLOCK AMPLIFIERS - CHIP
2
2 - 64
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC635
v00.1107
GaAs PHEMT MMIC DRIVER
AMPLIFIER, 18 - 40 GHz
Mounting & Bonding Techniques for Millimeterwave GaAs MMICs
50 Ohm Microstrip transmission lines on 0.127mm (5 mil) thick alumina
thin film substrates are recommended for bringing RF to and from the chip
(Figure 1). If 0.254mm (10 mil) thick alumina thin film substrates must be
used, the die should be raised 0.150mm (6 mils) so that the surface of
the die is coplanar with the surface of the substrate. One way to accomplish this is to attach the 0.102mm (4 mil) thick die to a 0.150mm (6 mil)
thick molybdenum heat spreader (moly-tab) which is then attached to the
ground plane (Figure 2).
0.102mm (0.004”) Thick GaAs MMIC
Ribbon Bond
0.076mm
(0.003”)
RF Ground Plane
Microstrip substrates should brought as close to the die as possible in
order to minimize bond wire length. Typical die-to-substrate spacing is
0.076mm to 0.152 mm (3 to 6 mils).
0.127mm (0.005”) Thick Alumina
Thin Film Substrate
Figure 1.
Handling Precautions
Follow these precautions to avoid permanent damage.
Storage: All bare die are placed in either Waffle or Gel based ESD protective containers, and then sealed in an ESD protective bag for shipment.
Once the sealed ESD protective bag has been opened, all die should be
stored in a dry nitrogen environment.
Cleanliness: Handle the chips in a clean environment. DO NOT attempt
to clean the chip using liquid cleaning systems.
Static Sensitivity:
strikes.
0.102mm (0.004”) Thick GaAs MMIC
Ribbon Bond
0.076mm
(0.003”)
RF Ground Plane
Follow ESD precautions to protect against ESD
Transients: Suppress instrument and bias supply transients while bias
is applied. Use shielded signal and bias cables to minimize inductive
pick-up.
2
0.150mm (0.005”) Thick
Moly Tab
0.254mm (0.010” Thick Alumina
Thin Film Substrate
Figure 2.
General Handling: Handle the chip along the edges with a vacuum collet or with a sharp pair of bent tweezers. The
surface of the chip has fragile air bridges and should not be touched with vacuum collet, tweezers, or fingers.
Mounting
The chip is back-metallized and can be die mounted with AuSn eutectic preforms or with electrically conductive epoxy.
The mounting surface should be clean and flat.
Eutectic Die Attach: A 80/20 gold tin preform is recommended with a work surface temperature of 255 °C and a tool
temperature of 265 °C. When hot 90/10 nitrogen/hydrogen gas is applied, tool tip temperature should be 290 °C. DO
NOT expose the chip to a temperature greater than 320 °C for more than 20 seconds. No more than 3 seconds of
scrubbing should be required for attachment.
DRIVER & GAIN BLOCK AMPLIFIERS - CHIP
The die should be attached directly to the ground plane eutectically or with
conductive epoxy (see HMC general Handling, Mounting, Bonding Note).
Epoxy Die Attach: Apply a minimum amount of epoxy to the mounting surface so that a thin epoxy fillet is observed
around the perimeter of the chip once it is placed into position. Cure epoxy per the manufacturer’s schedule.
Wire Bonding
Ball or wedge bond with 0.025mm (1 mil) diameter pure gold wire. Thermosonic wirebonding with a nominal stage
temperature of 150 °C and a ball bonding force of 40 to 50 grams or wedge bonding force of 18 to 22 grams is recommended. Use the minimum level of ultrasonic energy to achieve reliable wirebonds. Wirebonds should be started on
the chip and terminated on the package or substrate. All bonds should be as short as possible <0.31mm (12 mils).
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
2 - 65