RoHS PC0504 Power Chip Inductors Dimensions: Inches (mm) 0.051 Features • Unshielded SMD low cost design • Designed for high current applications • Accurate and consistent dimensions for auto insertion • Excellent for use in DC-DC converter application • High saturation for surface mounting Electrical Inductance Range: 2.2µh to 1000µh Tolerance: 20% over entire range, certain values available in 10% where shown. Also available in tighter tolerances Test Frequency: (L) as specified Operating Temp: -55ºC ~ +125ºC IDC: Current at which Inductance drops 10% of original value with a ∆ T= 40ºC whichever is lower. Resistance to Soldering Heat Test Method: Pre-Heat 150ºC, 1 Min. Solder Composition: Sn/Ag3.0/Cu0.5 Solder Temp: 260ºC +/- 5ºC for 10 sec ± 1 sec. Test Equipment (L): HP4192A Impedence Analyzer (DCR): Chen Hwa 502BC (IDC): HP4284A with HP42841A or CH1061 with CH301A Test Freq. (MHz)1V RDC Ω Max. IDC (A ) Allied Part Number Inductance (µh) Tolerance (%) PC0504-2R2M-RC 2.2 20 7.96 0.023 3.20 PC0504-3R3M-RC 3.3 20 7.96 .0314 2.59 PC0504-4R7M-RC 4.7 20 7.96 .0372 2.30 PC0504-8R2M-RC 8.2 20 7.96 .0594 1.70 PC0504-100M-RC 10 10, 20 2.52 0.100 1.44 PC0504-120M-RC 12 20 2.52 0.120 1.40 PC0504-150M-RC 15 10, 20 2.52 0.140 1.30 PC0504-180M-RC 18 20 2.52 0.150 1.23 PC0504-220M-RC 22 20 2.52 0.180 1.11 PC0504-270M-RC 27 20 2.52 0.200 0.97 PC0504-330M-RC 33 10, 20 2.52 0.230 0.88 PC0504-390M-RC 39 10, 20 2.52 0.320 0.80 PC0504-470M-RC 47 10, 20 2.52 0.370 0.72 PC0504-560M-RC 56 10, 20 2.52 0.420 0.68 PC0504-680M-RC 68 10, 20 2.52 0.460 0.61 PC0504-820M-RC 82 10, 20 2.52 0.600 0.58 PC0504-101M-RC 100 10, 20 1 0.700 0.52 PC0504-121M-RC 120 10, 20 1 0.930 0.48 PC0504-151M-RC 150 10, 20 1 1.100 0.40 PC0504-181M-RC 180 10, 20 1 1.380 0.38 PC0504-221M-RC 220 10, 20 1 1.570 0.35 PC0504-271M-RC 270 10, 20 1 1.850 0.29 PC0504-331M-RC 330 10, 20 1 2.000 0.28 PC0504-391M-RC 390 10, 20 1 2.600 0.26 PC0504-471M-RC 470 10, 20 1 3.000 0.12 PC0504-561M-RC 560 10, 20 1 4.190 0.10 PC0504-681M-RC 680 10, 20 1 4.440 0.08 PC0504-821M-RC 820 10, 20 1 5.120 0.05 PC0504-102M-RC 1000 10, 20 1 10.00 0.03 * *For 10% please change the “M” to “K” in the part number All specifications subject to change without notice. 0.051 Physical Recommended Solder Profile Packaging: 1500 pieces per 13 inch reel. Marking: EIA Inductance Code. Dimensions in mm 0.268/6.8 949-356-1780 ALLIED COMPONENTS INTERNATIONAL REVISED 07/22/2014 0.051/1.3 www.alliedcomponents.com