P600A-P600M 6A STANDARD RECOVERY RECTIFIERS High-reliability discrete products and engineering services since 1977 FEATURES Available as “HR” (high reliability) screened per MIL-PRF-19500, JANTX level. Add “HR” suffix to base part number. Available as non-RoHS (Sn/Pb plating), standard, and as RoHS by adding “-PBF” suffix. MAXIMUM RATINGS Parameter Symbols P600A P600B P600D P600G P600J P600K P600M Unit Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS voltage VRMS 35 70 140 280 420 560 700 V Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 V Maximum average forward rectified current @ TA = 60°C, 0.375” lead length IF(AV) 6.0 22 A Peak forward surge current 8.3ms single half sine wave superimposed on rated load IFSM 400 A Typical thermal resistance (1) RθJA RθJL 20 4.0 °C/W TJ, Tstg -50 to 150 °C @ TL = 60°C, 0.125” lead length Operating junction and storage temperature range Note 1: Thermal resistance from junction to ambient and from junction to lead at 0.375” lead length, PC board mounted with 1.1” x 1.1” copper heatsinks ELECTRICAL CHARACTERISTICS (TC = 25°C unless otherwise noted) Parameter Symbols P300A P300B P300D P300G P300J P300K P300M Unit 1.0 1.4 V Maximum instantaneous forward voltage at VF 6.0A 100A Maximum DC reverse current At rated DC blocking voltage TA = 25°C TA = 100°C 0.90 1.30 IR 5.0 1.0 µA mA Typical reverse recovery time at IF = 0.5A, IR = 1.0A, Irr = 0.25A trr 2.5 µs Typical junction capacitance at 4.0V, 1 MHz CJ 150 pF Rev. 20121119 High-reliability discrete products and engineering services since 1977 P600A-P600M 6A STANDARD RECOVERY RECTIFIERS MECHANICAL CHARACTERISTICS Case Digi I Marking Body painted, alpha numeric Polarity Cathode band Rev. 20121119 High-reliability discrete products and engineering services since 1977 P600A-P600M 6A STANDARD RECOVERY RECTIFIERS Rev. 20121119