BYV95 SERIES BYV96 SERIES FAST RECOVERY RECTIFIERS High-reliability discrete products and engineering services since 1977 FEATURES Available as “HR” (high reliability) screened per MIL-PRF-19500, JANTX level. Add “HR” suffix to base part number. Available as non-RoHS (Sn/Pb plating), standard, and as RoHS by adding “-PBF” suffix. MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Parameter Symbol BYV95A BYV95B BYV95C BYV96D BYV96E Units Maximum recurrent peak reverse voltage VRRM 200 400 600 800 1000 Volts Maximum RMS voltage VRMS 140 280 420 560 700 Volts Maximum DC blocking voltage VDC 200 400 600 800 1000 Volts Minimum avalanche breakdown voltage @ 100µA V(BR) 300 500 700 900 1100 Volts Maximum average forward rectified current 0.375” lead length at TA = 55°C I(AV) 1.5 Amps Peak forward surge current, 10ms single half sine-wave superimposed on rated load @ TJ = 165° IFSM 35.0 Amps Maximum instantaneous forward voltage @1.5A TJ = 25°C TJ = 165°C VF 1.6 1.35 Volts IR(AV) 1.0 150.0 µA Maximum DC reverse current at rated DC blocking voltage IR 2.0 µA Maximum reverse recovery time (1) trr Typical junction capacitance (2) CJ Maximum full load reverse current full cycle average, 0.375” lead length at TJ = 25°C TJ = 165°C Typical thermal resistance (3) 250 300 ns 10.0 pF RθJA 55.0 °C/W Operating junction temperature range TJ -65 to +175 °C Storage temperature range Tstg -65 to +200 °C 1. 2. 3. Measure with IF = 0.5A, IR = 1.0A, Irr = 0.25A Measured at 1.0 MHz and applied reverse voltage of 4.0Volts Thermal resistance from junction to ambient at 0.375” lead length, PC board mounted Rev. 20121214 High-reliability discrete products and engineering services since 1977 BYV95 SERIES BYV96 SERIES FAST RECOVERY RECTIFIERS MECHANICAL CHARACTERISTICS Case SOD-57 Marking Body painted, alpha-numeric Polarity Cathode band Rev. 20121214 High-reliability discrete products and engineering services since 1977 BYV95 SERIES BYV96 SERIES FAST RECOVERY RECTIFIERS Rev. 20121214