KBL005-KBL10 SINGLE PHASE BRIDGE RECTIFIERS High-reliability discrete products and engineering services since 1977 FEATURES Available as “HR” (high reliability) screened per MIL-PRF-19500, JANTX level. Add “HR” suffix to base part number. Available as non-RoHS (Sn/Pb plating), standard, and as RoHS by adding “-PBF” suffix. MAXIMUM RATINGS Symbol KBL005 KBL01 KBL02 KBL04 KBL06 KBL08 KBL10 Unit Maximum repetitive peak reverse voltage Rating VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS voltage VRMS 35 70 140 280 420 560 700 Volts Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 Volts Maximum average forward output rectified current at TA = 50°C Peak forward surge current single sine wave superimposed on rated load Operating and storage temperature range Typical thermal characteristics IF(AV) 4.0 Amps IFSM 200 Amps TJ, Tstg -50 to +150 °C (1) RӨJA 19 RӨJL 2.4(2) °C/W Note 1: Thermal resistance from junction to ambient with units mounted on 3.0x3.0x0.11” thick aluminum plate Note 2: Thermal resistance from junction to lead with units mounted on PCB at 0.375” lead length and 0.5x0.5” copper pads. ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise specified) Characteristic Maximum instantaneous forward drop per diode @ 4.0A Maximum DC reverse current at rated DC blocking voltage per diode TA = 25°C TA = 125°C Symbol VF IR KBL005 KBL01 KBL02 KBL04 KBL06 KBL08 KBL10 1.1 Units Volts 5 µA 1 mA Rev. 20130128 High-reliability discrete products and engineering services since 1977 KBL005-KBL10 SINGLE PHASE BRIDGE RECTIFIERS MECHANICAL CHARACTERISTICS Case Digi N Marking Alpha-numeric Pin out See below Rev. 20130128 High-reliability discrete products and engineering services since 1977 KBL005-KBL10 SINGLE PHASE BRIDGE RECTIFIERS Rev. 20130128