WMICP12 SERIES Up to 12 Watts AC/DC Wall Mount Power Supplies Single Outputs Rev C FEATURES • Class II • 10°C to +40° Operating Temperature Range • RoHS Compliant • Single Outputs Ranging from 5VDC to 24VDC • Up to 12 Watts Output Power • Over Current, & Short Circuit Protection • Light Weight, Compact • Input Protection • 90-264VAC Input Voltage Range • United States, Europe, United Kingdom, and • CEC & Energy Star Level VI Australia Interchangeable Plugs are Available • Models Available with Output Cable or USB Compliant (models over 5V) • CE, CB, GS, UL, FCC, SAA Safety Connector • Several Pantone® Case Colors Available Approvals DESCRIPTION Size: 2.32 x 1.61 x 1.04 inches 59.0 x 40.89 x 26.5 mm Weight: 4.94oz (140g) Several other Pantone® colors available The WMICP12 series of Class II wall mount AC/DC power supplies delivers up to 12 Watts of output power in a 2.32” x 1.61” x 1.24” package. This series consists of 5V, 7.5V, 9V, 12V, 19V, and 24V single output models with an input voltage range of 90-264VAC. These supplies are protected against over current, and short circuit conditions. The WMICP12 series is RoHS and CEC/ Energy Star Level VI compliant. These supplies also have CE, CB, GS, UL, FCC, and SAA safety approvals. United States, Europe, United Kingdom, and Australia interchangeable plugs are available for this series. Models are available with an output cable or USB connector. Several Pantone® case colors are also available for this series. MODEL SELECTION TABLE WMICP1205X Output Voltage 5 VDC WMICP1275X 7.5 VDC 1600mA 60mVp-p 12W WMICP1209X 9 VDC 1200mA 60mVp-p 10.8W Model Number (1) Input Voltage Range 90 ~ 264 VAC WMICP1212X Output Current Ripple & Noise (2) Output Power Output Connector (3) 2000mA 50mVp-p 12W Efficiency Level VI VI with Cable VI 12 VDC 1000mA 70mVp-p 12W WMICP1219X 19 VDC 600mA 70mVp-p 11.4W VI WMICP1224X 24 VDC 500mA 80mVp-p 12W VI WMICP1205X-USB 5 VDC 2000mA 50mVp-p 12W VI WMICP1275X-USB 7.5 VDC 1600mA 60mVp-p 12W VI WMICP1209X-USB VI 9 VDC 1200mA 60mVp-p 10.8W 12 VDC 1000mA 70mVp-p 12W WMICP1219X-USB 19 VDC 600mA 70mVp-p 11.4W VI WMICP1224X-USB 24 VDC 500mA 80mVp-p 12W VI WMICP1212X-USB 90 ~ 264 VAC USB VI VI NOTES 1. The “X” in the model number represents the type of AC plug: “U” for United States type, “K” for United Kingdom type, “E” for Europe type, and “A” for Australia type. 2. Ripple and noise is measured at 20MHz limited bandwidth with 0.1µF ceramic and 10µF electrolytic capacitors across the output. 3. Several output connector options are available. Please call factory for ordering details. 4. Interchangeable plugs are sold separately. Please call factory for ordering details. 5. Black case is standard. Several other Pantone® colors are available; please call factory for ordering details. 04/28/2014 Wall Industries, Inc. • 37 Industrial Drive, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 1 of 4 WMICP12 SERIES Up to 12 Watts AC/DC Wall Mount Power Supplies Single Outputs Rev C TECHNICAL SPECIFICATIONS: WMICP12 SERIES All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS Min Typ Max 100 90 47 115/230 115/230 50/60 240 264 63 30 75 1.2 0.3 Unit INPUT SPECIFICATIONS Rated input voltage range Full Range Input Voltage Input Frequency At 100VAC and full load At 240VAC and full load At 90VAC/60Hz and full load At 230VAC/50Hz and no load Inrush Current Input Current Standby Power VAC Hz A A W OUTPUT SPECIFICATIONS Output Voltage Voltage Tolerance Line Regulation Load Regulation Output Power Output Current Minimum Load Hold-up Time Turn-on Delay Time Ripple & Noise (20MHz BW) -5 -1 -5 At 100Vac/60Hz and full load At 100Vac/60Hz and full load With 0.1µF ceramic and 10µF electrolytic capacitors in parallel See Table +5 +1 +5 See Table See Table % % % 0 10 mA ms s 3 See Table PROTECTION Over Current Protection Short Circuit Protection Output shut-down; Auto recovery 3.6A Inner Current Fuse GENERAL SPECIFICATIONS Switching Frequency Efficiency At 100~240VAC, 50/60Hz, and full load Dielectric Withstand Voltage (I/P to O/P) 10mA/60sec Insulation (I/P to O/P) 500VDC 65 KHz % VAC MΩ 72 3000 10 ENVIRONMENTAL SPECIFICATIONS Operating Temperature Storage Temperature Humidity Cooling MTBF 10 -20 5 Non-condensing 0.5% annual field failure rate at 25°C +40 +80 95 Free air convection 50,000 °C °C % RH hours PHYSICAL SPECIFICATIONS Dimensions (L x W x H) Weight AC Plug See “Model Number Setup” table on page 4 Output Connector See “Model Number Setup” table on page 4 Case Color Suffix “U” Suffix “K” Suffix “E” Suffix “A” Output cable Suffix “-USB” 2.32 x 1.61 x 1.04 inch (59.0 x 40.9 x 26.5 mm) 4.94oz (140g) United States plug United Kingdom plug Europe plug Australia plug Several options available USB connector Several Pantone® color options available SAFETY & COMPLIANCE Safety Approvals Compliance 04/28/2014 UL60950, FCC Part 15 Class B, CE EN60950/EN55022, GS EN60950/EN55022, and SAA AS/NZS60950-1: 2011 RoHS & CEC/Energy Star Level VI compliant Wall Industries, Inc. • 37 Industrial Drive, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 2 of 4 Rev C WMICP12 SERIES Up to 12 Watts AC/DC Wall Mount Power Supplies Single Outputs MECHANICAL DRAWING Output Cable Models USB Models 04/28/2014 Wall Industries, Inc. • 37 Industrial Drive, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 3 of 4 WMICP12 SERIES Up to 12 Watts AC/DC Wall Mount Power Supplies Single Outputs Rev C MODEL NUMBER SETUP WMICP 12 24 U Series Name Output Power Ouptut Voltage AC Plug Type (1) 12: 05: 12 Watts 5 VDC U: United States 75: 7.5 VDC K: United Kingdom 09: 9 VDC E: Europe 12: 12 VDC A: Australia 19: 19 VDC 24: 24 VDC - USB W Output Connector (2) Case Color (3) None Output Cable USB: USB connector None: Black W: White X: See Note 3 Notes: 1. Interchangeable plugs are sold separately. Please call factory for ordering details. 2. Several output connectors are available. Please call factory for ordering details. 3. Black case is standard. Several other Pantone® colors are available; please call factory for ordering details. COMPANY INFORMATION Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008 certification is just one example of our commitment to producing a high quality, well-documented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone: Toll Free: Fax: E-mail: Web: Address: 04/28/2014 (603)778-2300 (888)597-9255 (603)778-9797 [email protected] www.wallindustries.com 37 Industrial Drive Exeter, NH 03833 Wall Industries, Inc. • 37 Industrial Drive, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 4 of 4