WMEM1024 SERIES 16~36 Watts Medical AC/DC Wall Mount Power Supplies Rev B United States (“U” Suffix) United Kingdom (“K” Suffix) Europe (“E” Suffix) Australia (“A” Suffix) Size: 2.98 x 1.69 x 1.19 inches Size: 2.98 x 1.69 x 1.19 inches Size: 2.98 x 1.69 x 1.19 inches Size: 2.98 x 1.69 x 1.19 inches FEATURES • RoHS & WEEE Compliant • 0 to +40°C Operating Temperature Range • 90-264VAC Input Voltage Range • Single Outputs Ranging from 5VDC to 48VDC EN/IEC 60601-1: 3rd Edition Medical • 16~36 Watts Output Power • Several Output Connector Options Available Approvals • Over Voltage & Short Circuit • CEC Level V, VI Compliant • United States, United Kingdom, Europe, and • CB, CE, FCC Approvals Protection • UL/cUL 60601-1: 3rd Edition & TUV/SUD Australia Plug Types Available DESCRIPTION The WMEM1024 series of AC/DC wall mount power supplies provides up to 36 watts of output power in a 2.98” x 1.69” x 1.19” package. This series consists of single output models ranging from 5VDC to 48VDC with an input voltage range of 90~264VAC. This series is RoHS and WEEE compliant and meets CEC Level V, VI requirements. This series also has UL/cUL 60601-1 and TUV/SUD EN/IEC 60601-1: 3rd edition medical approvals. These supplies are protected against over voltage and short circuit conditions. Models are available in United States (U suffix), United Kingdom (K suffix), Europe (E suffix), and Australia (A suffix) types. MODEL SELECTION TABLE Model Number (1) WMEM1024Ax WMEM1024Bx WMEM1024Cx WMEM1024Dx WMEM1024Ex WMEM1024Fx WMEM1024Gx WMEM1024Hx WMEM1024Jx WMEM1024Kx WMEM1024Mx WMEM1024Nx WMEM1024Px WMEM1024Qx WMEM1024Rx 5 ~ 8 VDC 5 ~ 8 VDC 5 ~ 8 VDC 9 ~ 11 VDC 9 ~ 11 VDC 9 ~ 11 VDC 12 ~ 17 VDC 12 ~ 17 VDC 18 ~ 24 VDC 18 ~ 24 VDC 36 ~ 48 VDC Output Current Min Max 0A 2.0A 0A 3.0A 0A 4.0A 0A 1.5A 0A 2.0A 0A 3.0A 0A 1.66A 0A 2.5A 0A 1.33A 0A 1.66A 0A 0.55A 36 ~ 48 VDC 12 VDC 12 VDC 24 VDC 0A 0A 0A 0A Input Voltage Range Output Voltage (2) 100 ~ 240 VAC Load Line Ripple & Noise (3) Regulation Regulation ±5% ±1% 100mVp-p ±5% ±1% 100mVp-p ±5% ±1% 100mVp-p ±5% ±1% 250mVp-p ±5% ±1% 250mVp-p ±5% ±1% 250mVp-p ±5% ±1% 250mVp-p ±5% ±1% 250mVp-p ±5% ±1% 350mVp-p ±5% ±1% 350mVp-p ±5% ±1% 480mVp-p 0.83A 3.0A 2.0A 1.5A ±5% ±5% ±5% ±5% ±1% ±1% ±1% ±1% 480mVp-p 250mVp-p 250mVp-p 350mVp-p Output Power 16W 20W 24W 18W 24W 27W 20W 30W 24W 30W 20W 30W 36W 24W 36W NOTES 1. The “x” in the model number represents the type of plug: “x” can be “U” for United States type, “K” for United Kingdom type, “E” for Europe type, or “A” for Australia type. 2. The output voltage is specified as a range (Ex: 36~48 VDC); the customer must specify what they want the voltage set at. 3. Ripple and Noise is measured at nominal line and full load with 20MHz bandwidth and a 0.1µF ceramic capacitor and 47µF aluminum capacitors in parallel across the output. 4. Optional output connectors are available. Please call factory for ordering details. 09/24/2014 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-7789797 website: www.wallindustries.com • e-mail: [email protected] Page 1 of 3 Rev B WMEM1024 SERIES 16~36 Watts Medical AC/DC Wall Mount Power Supplies SPECIFICATIONS: WMEM1024 SERIES All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS Min Typ Max 100 90 47 0.5 115/230 115/230 50/60 240 264 63 1.0 60 Unit INPUT SPECIFICATIONS Rated input voltage range Operating input voltage range Input Voltage Input Frequency Input Current Inrush Current OUTPUT SPECIFICATIONS Output Voltage Cold start VAC Hz A A See Table Line Regulation -1 Load Regulation -5 Output Power +1 % +5 % See Table Output Current See Table Minimum Load Ripple & Noise 0 20MHz limited bandwidth Hold-Up Time Turn-on Time PROTECTION Over Voltage Protection mA See Table 8.3 ms 3 s Automatic recovery Short Circuit Protection Automatic recovery GENERAL SPECIFICATIONS Efficiency Meets CEC Level V, VI Withstand Voltage 5mA, 2 sec between primary and secondary Isolation Resistance 500VDC, 3 seconds between primary and secondary Leakage Current 240VAC/50Hz ENVIRONMENTAL SPECIFICATIONS Operating Temperature 4000 VAC 50 MΩ 100 µA 0 +40 °C Storage Temperature -20 +85 °C Operating Humidity 10 90 % Storage Humidity 5 95 % Cooling MTBF PHYSICAL SPECIFICATIONS Free air convection 30,000 Dimensions (L x W x H) Weight Output Connector AC Plug Types “U” suffix “K” suffix “E” suffix “A” suffix hours 2.98 x 1.69 x 1.19 inch (75.8 x 42.8 x 30.2 mm) 7.05oz (200g) Contact factory for options United States United Kingdom Europe Australia SAFETY & COMPLIANCE Compliance RoHS, WEEE, and CEC Level V, VI UL/cUL 60601-1: 3rd Edition Safety Approvals 09/24/2014 TUV/SUD EN/IEC 60601-1: 3rd Edition CB, CE, FCC Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-7789797 website: www.wallindustries.com • e-mail: [email protected] Page 2 of 3 Rev B WMEM1024 SERIES 16~36 Watts Medical AC/DC Wall Mount Power Supplies MECHANICAL DRAWINGS United States (“U” Suffix) United Kingdom (“K” Suffix) Europe (“E” Suffix) Australia (“A” Suffix) Optional output connectors available. Please call factory for ordering details COMPANY INFORMATION Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008 certification is just one example of our commitment to producing a high quality, well-documented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone: (603)778-2300 Toll Free: (888)597-9255 Fax: (603)778-9797 09/24/2014 E-mail: [email protected] Web: www.wallindustries.com Address: 37 Industrial Drive Exeter, NH 03833 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-7789797 website: www.wallindustries.com • e-mail: [email protected] Page 3 of 3