Download Data Sheet

WMSAW24 SERIES
15~24 Watts AC/DC Wall Mount Power
Supplies
Rev E
United States (“U” Suffix)
United Kingdom (“K” Suffix)
Europe (“E” Suffix)
FEATURES
• Class II
• Single Outputs
• RoHS Compliant
• 100-240VAC Input Voltage Range
• 15~24 Watts Output Power
• Very Low Standby Power
Size: 2.90 x 1.38 x 2.04
inches
China (“C” Suffix)
Size: 2.95 x 1.97 x 2.31
inches
Australia (“A” Suffix)
Size: 2.90 x 1.38 x 2.04
inches
Japan (“J” Suffix)
Korea (“KR” Suffix)
• MTBF: 50,000 Hours
• 0°C to +40° Operating Temperature Range
• Over Voltage, Over Current, and Short Circuit
Protection
• CEC / Energy Star Level V Compliant
• UL/cUL, FCC, CE, AV/CE, GS, AV/GS, CB, AV/CB,
EUP, SAA BS1363, CCC, MEPS, PSE, KC and CTICK Safety Approvals
• United States, United Kingdom, Europe, China,
Size: 2.90 x 1.38 x
2.04 inches
Size: 2.91 x 1.38 x 2.74
inches
Size: 2.90 x 1.38 x
2.04 inches
Size: 2.90 x 1.38 x
2.04 inches
Australia and Japan AC Plug Types Available
• Several Output Connector Options Available
DESCRIPTION
The WMSAW24 series of Class II AC/DC wall mount power supplies provides up to 24 Watts of output power. This series has single
output models with an input voltage range of 100-240VAC. These supplies are protected against over voltage, over current, and short
circuit conditions. The WMSAW24 series is RoHS and CEC/Energy Star Level V compliant and has UL/cUL, FCC, CE, AV/CE, GS,
AV/GS, CB, AV/CB, EUP, SAA BS1363, CCC, MEPS, PSE, KC and C-TICK safety approvals. United States, United Kingdom, Europe,
China, Australia, Korea and Japan AC plug types are available. Several output connector options are also available. Please contact the
factory for ordering details.
MODEL SELECTION TABLE
Model Number
(1)
Input Voltage Range
Output Voltage
Output Current
Ripple & Noise (2)
Output Power
WMSAW1505-x
5 VDC
3A
50mVp-p
15W
WMSAW1809-x
9 VDC
2A
90mVp-p
18W
WMSAW2209-x
9 VDC
2.5A
90mVp-p
22.5W
WMSAW1812-x
100 ~ 240 VAC
12 VDC
1.5A
120mVp-p
18W
WMSAW2412-x
12 VDC
2A
120mVp-p
24W
WMSAW2319-x
19 VDC
1.25A
190mVp-p
23.75W
WMSAW2424-x
24 VDC
1A
240mVp-p
24W
NOTES
1. The “x” in the model number represents the type of plug: “U” for United States type, “K” for United Kingdom type, “E” for
Europe type, “A” for Australia type, “C” for China type, and “J” for Japan type.
2. Ripple and noise is measured at 20MHz limited bandwidth with 0.1µF ceramic and 10µF electrolytic capacitors across the
output
3. Optional output connectors available. Please call factory for ordering details.
03/06/2013
Wall Industries, Inc. • 5 Watson Brook Road, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603778-9797
website: www.wallindustries.com • e-mail: [email protected]
Page 1 of 4
Rev E
WMSAW24 SERIES
15~24 Watts AC/DC Wall Mount Power
Supplies
SPECIFICATIONS: WMSAW24 SERIES
All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
TEST CONDITIONS
Min
Typ
Max
Unit
INPUT SPECIFICATIONS
Input Voltage
Rated input voltage range
100
115/230
240
VAC
Input Frequency
47
50/60
63
Hz
Input Current
90VAC/60Hz and full load
0.8
A
100VAC and full load
30
Inrush Current
A
240VAC and full load
75
Stand-by Power
230VAC/50Hz and no load
0.3
W
OUTPUT SPECIFICATIONS
Output Voltage
See Table
Voltage Tolerance
-5
+5
%
Line Regulation
-1
+1
%
Load Regulation
-5
+5
%
Output Power
See Table
Output Current
See Table
Minimum Load
0
mA
Ripple & Noise
See Table
Hold-Up Time
100VAC/60Hz and full load
10
ms
Turn-on Time
100VAC/60Hz and full load
3
s
PROTECTION
Over Voltage Protection
Output voltage clamped by Zener diode
Over Current Protection
Output shut-down; Automatic recovery
Short Circuit Protection
Output shut-down; Automatic recovery
GENERAL SPECIFICATIONS
Efficiency
CEC-V / ERP / MEPS
Switching Frequency
65
KHz
Dielectric Withstand
10mA / 60 sec
3000
VAC
Voltage
Insulation (input to output) 500VDC
10
MΩ
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature
0
40
°C
Storage Temperature
-20
60
°C
Operating Humidity
5
95
% RH
Cooling
Free air convection
MTBF
@ 25°C (MIL-HDBK-217F)
50,000 hours
PHYSICAL SPECIFICATIONS
United States Plug Type
Suffix “U”
2.90” x 1.38” x 2.04” (73.7 x 35.0 x 51.7 mm)
United Kingdom Plug Type
Suffix “K”
2.95” x 1.97” x 2.31” (75.0 x 50.0 x 58.7 mm)
Europe Plug Type
Suffix “E”
2.91” x 1.38” x 2.74” (74.0 x 35.0 x 69.7 mm)
Australia Plug Type
Suffix “A”
2.90” x 1.38” x 2.04” (73.7 x 35.0 x 51.7 mm)
Dimensions (L x W x H)
China Plug Type
Suffix “C”
2.90” x 1.38” x 2.04” (73.7 x 35.0 x 51.7 mm)
Japan Plug Type
Suffix “J”
2.90” x 1.38” x 2.04” (73.7 x 35.0 x 51.7 mm)
Korean Plug Type
Suffix “KR”
2.91” x 1.38” x 2.74” (74.0 x 35.0 x 69.7 mm)
Weight
Approximately 5.11oz (145g)
AC Plugs
United States, United Kingdom, Europe, Australia, China, Korea, and Japan types
SAFETY & COMPLIANCE
Safety Approvals
UL/cUL, FCC, CE, AV/CE, GS, AV/GS, CB, AV/CB, EUP, SAA BS1363, CCC, MEPS, PSE, KC, and C-TICK
Compliance
RoHS and CEC/Energy Star Level V compliant
03/06/2013
Wall Industries, Inc. • 5 Watson Brook Road, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603778-9797
website: www.wallindustries.com • e-mail: [email protected]
Page 2 of 4
Rev E
WMSAW24 SERIES
15~24 Watts AC/DC Wall Mount Power
Supplies
MECHANICAL DRAWINGS
United States (“U” Suffix)
United Kingdom (“K” Suffix)
Europe (“E” Suffix)
Australia (“A” TYPE)
China (“C” Suffix)
03/06/2013
Japan (“J” Suffix)
Korea (“KR” Suffix)
Wall Industries, Inc. • 5 Watson Brook Road, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603778-9797
website: www.wallindustries.com • e-mail: [email protected]
Page 3 of 4
WMSAW24 SERIES
15~24 Watts AC/DC Wall Mount Power
Supplies
Rev E
MODEL NUMBER SETUP
WMSAW
24
24
Series Name
Output Power
Ouptut Voltage
-
U
AC Plug Type
15:
15 Watts
05:
5 VDC
U:
United States
17:
17.5 Watts
75:
7.5 VDC
K:
United Kingdom
18:
18 Watts
09:
9 VDC
E:
Europe
20:
20.7 Watts
12:
12 VDC
A:
Australia
22:
22.5 Watts
138:
13.8 VDC
C:
China
24:
24 Watts
24 VDC
J:
Japan
KR:
Korea
24:
Note: Several output connector options are available. Please contact factory for ordering details.
COMPANY INFORMATION
Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and
development engineers will provide a solution that exceeds your performance requirements on-time and on
budget. Our ISO9001-2008 certification is just one example of our commitment to producing a high quality, welldocumented product for our customers.
Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for
working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements.
We will continue to provide ongoing support for your project above and beyond the design and production phases.
Give us a call today to discuss your future projects.
Contact Wall Industries for further information:
Phone:
Toll Free:
Fax:
E-mail:
Web:
Address:
03/06/2013
(603)778-2300
(888)597-9255
(603)778-9797
[email protected]
www.wallindustries.com
5 Watson Brook Rd.
Exeter, NH 03833
Wall Industries, Inc. • 5 Watson Brook Road, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603778-9797
website: www.wallindustries.com • e-mail: [email protected]
Page 4 of 4