AMFD Manifolds 2, 3, or 5 ways Main Features For corrosive gasses and liquids Isolating, purging and calibration of measuring instruments For pressure gauges, pressure switches and transmitters Gauge, absolute and différential pressure Full stainless steel Option: NACE conform Applications Oil & Gas / Chemical Water & Waste water Energy Machinery Description AMFD manifolds make it possible to close off, purge or isolate measurement pipework. They offer the opportunity to check pressure measuring instruments or transmitters by isolating them (e.g. for zero adjustment). For all of our manifolds the heads can be changed without the need for special tools. The valve stem is fitted with a rear seat. Thus the pressure load on the gland packing is relieved when the stem is opened to its limit stop. Connections Inlet: Outlet: Purge/test: 1/2 NPT female 1/2 NPT female 1/4 NPT female with plug (only 2-way and 5-way) Components Body: Bonnet: Valve stem: Needle tip: Packing: Gland nut: T-Handle: Screw plug: 1.4404 (316L) 1.4401 (316) 1.4404 (316L) (1) 1.4571 (316Ti) PTFE (up to 200 °C) 1.4301 (304) Stainless Steel 1.4404 (316L) All of our manifolds are suitable for liquids and gases and are subjected to an overpressure strength test during manufacture (1.5 times the rated pressure). (1) Options bar 400 PTFE packing 300 Graphite packing Compliant with NACE MR0175 and MR0103 Code 0073 Mounting kit on 2" pipes Code 0407 Degreased for oxygen applications Code 0765 Packing graphite (≤ 400 °C) Code 1803 Material certificate 3.1 Code Q003 200 0 100 www.baumer.com 200 300 2015-02-27 100 Design and specifications subject to change without notice Pressure / Temperature diagram External stem thread Stem with cold rolled surface, back seat and non-rotating needle tip 400 ˚C Data sheet A55.02 Page 1 / 2 AMFD Manifolds 2, 3, or 5 ways Dimensions Manifold 2 ways Instrument Purge / contrôle Process Manifold 3 ways Instrument Process Manifold 5 ways Instrument Process Purge/test . Model Accessories Type Manifold Operation 2 ways 3 ways 5 ways . xx . x A MFD 02 03 05 N 2015-02-27 Inlet / Outlet thread 1/2 NPT female xxx Design and specifications subject to change without notice Ordering details www.baumer.com Data sheet A55.02 Page 2 / 2