RPPY4 Industrial pressure switch with intrinsic safety and high overpressure resistance Main Features High over pressure resistant Excellent repeatability Fix dead band for control and alarm Dead band adjustment for regulation Intrinsic safety Hazardous area 0, 1, 2 Applications Power generation safety equipment Pressurized chambers control Liquid level control Technical Data -50 mbar ... 0 to 0 ... 2500 mbar Temperature Process : Ambient : Storage : -15 ... +150°C -25 ... +70°C (T5) -30 ... +55°C (T6) -40 ... +70°C Repeatability ± 1% F.S. @ constant pressure cycle CE conformity Low Voltage Directive LVD 2006/95/EC Pressure Equipment Directive PED 97/23/EC ATEX Directive 94/9/EC Protection rating IP 66 (EN 60529) Process connection Stainless steel 1.4404 (316L) Sensing element Flanges : Stainless steel 1.4404 (316L) Diaphragm : Viton® Scale Internal. Accuracy on reading ± 5% FS Cover Case Zamak blue painted Captive stainless steel screws Black Zamak Mounting Wall mounting braket Ground connection Via internal terminal block Electrical connection Electrical function Terminal block with plastic cable gland for Ø 7 to 10.5 mm Adjustment 2 external adjustment screws on top of the case for set point and dead band Type examination certificate LCIE 03 ATEX 6123X EN 60079-0: 2012 (internal conformity analysis) EN 60079-11: 2012 Marking 0081 IM1 Ex ia I Ma II 1 G Ex ia IIC T6 or T5 Ga Electrical data Umax = 28 Vdc Imax = 120 mA Pmax = 0.84 W ATEX See ordering code details on page 5 Ci = Negligible ; Li = Negligible Design and specifications subject to change without notice Pressure range Options Customer specific set point adjustment Code SETP Oxygen application Code 0765 Mounting on 2" pipe Code 0407 Electrical connection: stainless steel connector (Souriau) Code 2298 Code 2249 Stainless steel tag plate and wire Code 9941 Lead seal of the adjustment screws Code 8990 2015-04-23 Mobile plug for stainless steel connector (Souriau) www.baumer.com Data sheet A32.09 Page 1 / 5 RPPY4 Industrial pressure switch with intrinsic safety and high overpressure resistance Principle A vapour filled sensing element actuates a microswitch by means of a lever. The set point and the dead band are set by springs mounted in opposition NC NC NC C C C NO NO NO Set point and reset point must be between 10% and 90% of the selected scale. Standard factory adjustment Setpoint at 50% of the scale on falling pressure NC C NC NC C C NO Customer specific factory adjustment (option SETP) The following specifications have to be given with the order: • Setpoint value • Adjustment on falling or raising pressure • Dead band value when using an adjustable dead band switch NO NO Electrical connections 2 SPDT 1 SPDT NC Blue COM Red NO White NC Blue COM Red NO Yellow / green NC COM NO White Blue Red White Yellow / green Certified safety barrier NO C Non hazardous area NO or NC NC + Rc 1 Supply – Screen For max. ambient temperature according to temperature classes T5 and T6 refer to technical data on page 1. The installation must be made in an intrinsically safe circuit whose certified electrical safety parameters do not exceed any of the values Umax, Imax and Pmax given in the electrical data on page 1. 2015-04-23 All necessary measures must be taken by the user, to avoid the calorific transfer from the fluid to the apparatus head increasing the head's temperature to such that it reaches the self-ignition temperature of the gas in which it is used. Design and specifications subject to change without notice Hazardous area Zone 0, 1, 2 www.baumer.com Data sheet A32.09 Page 2 / 5 RPPY4 Industrial pressure switch with intrinsic safety and high overpressure resistance Micro switches characteristics Switch code N (T) M (K) C (W) S Type Tropicalized Gold contact Hermetic Ultrasensitive Gold contact 6 Vdc 0.1 ... 0.12 A 10 ... 50 mA 5 ... 120 mA 10 ... 50 mA 12 Vdc N/A 10 ... 50 mA 5 ... 66 mA 10 ... 50 mA 24 Vdc N/A 10 ... 33 mA 5 ... 33 mA 10 ... 33 mA 30 Vdc N/A N/A N/A N/A 48 Vdc N/A N/A N/A N/A 110 Vdc N/A N/A N/A N/A 220 Vdc N/A N/A N/A N/A 115 Vac N/A N/A N/A N/A 250 Vac Dielectric rigidity between contacts and ground N/A N/A N/A N/A 2000 V 2000 V 1500 V 2000 V Adjustable ranges P. Max accidental Scale mbar Micro-switch dead band 1) Adjustable dead band Code bar N (T*) M (K*) Fixed dead band C (W*) S 10% 90% 10% 90% 10% 90% mbar mbar mbar mbar mbar mbar 0 10 101 2 - 25 2.5 - 25 6.5 - 25 7.5 - 25 1.4 1.7 -2 ... 10 10 102 1 - 10 1 - 10 N/A N/A 1 1.1 -5 ... 50 10 103 1 - 20 2 - 20 4.5 - 20 5 - 20 1 1.1 -8 ... 100 10 104 1.5 - 25 2.5 - 25 5 - 25 10 - 25 1.2 1.4 50 151 12 - 80 20 - 80 25 - 80 40 - 80 7 11 15 - 80 25 - 80 30 - 80 45 - 80 8 11 -50 ... -200... 0 0 ... 200 50 152 0 ... 400 50 153 17 - 150 30 - 150 35 - 150 50 - 150 9.2 15.4 0 ... 1000 50 154 22 - 150 35 - 150 45 - 150 60 - 150 14 19.5 20 - 350 40 - 350 40 - 350 70 - 350 16 25 0 ... 700 100 171** 0 ... 1500 100 172** 20 - 350 60 - 350 40 - 350 100 - 350 16 25 0 ... 2500 100 173** 25 - 350 90 - 350 50 - 350 160 - 350 21 31 The value of the dead band is depending on the value of the set point. This table contains the dead band values for set point adjustment at 10% and 90% of the selected scale. For adjustable dead band the lower value corresponds to the dead band spring totally released and the higher corresponds to the dead band spring fully tensed . For other set points the dead band value can be calculated by linear interpolation between the values at 10% and 90%. 2015-04-23 1) Design and specifications subject to change without notice (*) For version with 2 microswitches lower values of the dead band must be multiplied x 1.5 (**) G1/4 female only www.baumer.com Data sheet A32.09 Page 3 / 5 RPPY4 Industrial pressure switch with intrinsic safety and high overpressure resistance Dimensions (mm) 125 76.5 = 144 139 = 58 130 5 64 100 45° Pressure range code : 151 - 152 - 153 - 154 Weight : 6.4 kg Hex 24 61 Ø 120 2015-04-23 Design and specifications subject to change without notice G 1/2(M) G 1/4 12 Ø 145 64 56 Ø 245 Hex 24 Hex 24 Hex 24 Hex 24 G 1/2(M) Pressure range code : 171 - 172 - 173 Weight : 7 kg 84 Pressure range code : 101 - 102 - 103 - 104 Weight : 10 kg www.baumer.com Data sheet A32.09 Page 4 / 5 RPPY4 Industrial pressure switch with intrinsic safety and high overpressure resistance Ordering details RPPY4 RP Model Industrial pressure switch Approvals ATEX intrinsic safety Sensing element Diaphragm (Viton ®), high overpressure resistance Type of micro switches 1 SPDT hermetically changeover switch 2 SPDT hermetically changeover switch 1 SPDT gold contact changeover switch 2 SPDT gold contact changeover switch 1 SPDT tropicalized changeover switch 2 SPDT tropicalized changeover switch 1 SPDT ultrasensitive gold contact changeover switch Process connection G 1/4 female (only pressure ranges 171, 172, 173) G 1/2 male (standard) 1/2 NPT male 1/4 NPT female Pressure range (mbar) Pressure range (kPa) -50 ... 0 -5 ... 0 -2 ... 10 -0.2 ... 1 -5 ... 50 -0.5 ... 5 -8 ... 100 -0.8 ... 10 -200... 0 -20 ... 0 0 ... 200 0 ... 20 0 ... 400 0 ... 40 0 ... 1000 0 ... 100 0 ... 700 0 ... 70 0 ... 1500 0 ... 150 0 ... 2500 0 ... 250 Options to be added behind the / (see example below) PY – 4 . xxx / RP PY – 4 Deadband Adjustable Adjustable Adjustable Adjustable Adjustable Adjustable Fix C W M K N T S H 3 6 8 . 101 102 103 104 151 152 153 154 171 172 173 Process connection G1/4 female Process connection G1/4 female Process connection G1/4 female / Ordering example with options RP PY – 4 C 3 . 101 / 0407 _ 9941 Industrial pressure switch With ATEX approval intrinsic safety Diaphragm Viton® 1 SPDT hermetically changeover switch Process connection G 1/2 male Design and specifications subject to change without notice Pressure range -50 ... 0 mbar Option : Mounting on 2" pipe 2015-04-23 Option : Stainless steel tag plate and wire www.baumer.com Data sheet A32.09 Page 5 / 5