Typical Insertion Loss 80 Series 600 High-Density Filtered Connectors 70 Capacitive Filter Insertion Loss (dB) 60 50 The miniaturization of electronic systems and sub-systems is pushing designers to increase circuit densities within smaller packages. To address this growing need, API Technologies’ Spectrum Control brand has developed a line of filtered High-Density D-subminiature connectors. This new line of connectors incorporates the high performance and reliable filtering of API’s standard D-subs in the High-Density format. 30 18 20 10 0 16 15 10MHz 1MHz 100MHz Frequency 1GHz 5GHz Above curves represent application of proper grounding fundamentals, for assistance consult with Spectrum Control. Features Connectors designed to MIL-C-24308 ■ Capacitance values from 85 pF to 4000 pF ■ Filter type feed-through C ■ Selectively specify and filter each contact position ■ Available in feed-through capacitive configurations Mechanical Specifications: Same as Series 700 connectors, page FC21. 19 40 ■ Insertion loss measured per MIL-STD-220, no load, 50 ohm source and load. Electrical Specifications Current Rating . . . . 3 Amps RF Current Rating. . 0.3 Amps Contact Resistance . . 15 milliohms maximum UL Recognized. . . . . Under category of communication . . . . . . . . . . . . . . . . circuit accessories, File #E149046 Electrical Specifications: High-Density Connectors Filter Designations Capacitance Filter Circuits Value Tol. 3 dB Cut-off Frequency Max. (MHz) Dielectric Working WithVoltage DC 5 standing -55°C to MHz Voltage +125°C 10 MHz Minimum Insertion Loss - Decibels (dB) 20 MHz 50 MHz 100 MHz 200 MHz 500 MHz 1 GHz 2 GHz 5 GHz 15 85 pF ±25% 60 300V 100V — — — — 1 6 16 21 22 20 16 180 pF ±25% 28 300V 100V — — — 1 8 10 18 25 26 24 18 1000 pF ±25% 5.1 300V 100V — 3 8 14 20 25 32 35 41 39 19 4000 pF ±25% 1.3 300V 100V 8 13 19 26 31 37 45 48 52 47 C Filter designation “G” for grounded contacts, “I” for insulated (not filtered) contacts. Filter designation “O” for omitted contact and no hole in ground plane. Ordering Information Example: 56-605-015-LI 56 - D-Sub Connector 6 0 5 - 0 15 Shell Size** 0 = 15 1 = 26 2 = 44 3 = 62 4 = 78 - Standard connector F - RoHS compliant version Hi-Density - LI Above data represents guaranteed minimum. This part number represents a Series 600 Hi-Density filtered D-Sub connector with 15 contacts, pin-socket adapter configuration. The FT filters have a capacitance value of 85 pF and the connector includes 4-40 locking inserts. Contact/Termination Special Filter Designation 1 - Pin to solder cup 0 = All 15 - 85 pF FT 2 - Pin to 90° PCB mount* positions 16 - 180 pF FT 3 - Socket to PCB mount same 18 - 1,000 pF FT 4 - Socket to 90° PCB* 9 = Special 19 - 4,000 pF FT mount loading 20 - Insulated contact 5 - Pin-socket adapter ** Some shell sizes require minimum order quantity. 7 - Pin to PCB mount Consult API for details. Options LI = 4-40 inserts S = Solder dip tails 50G = µ gold GBL = Grounding board lock * Required on right angle parts Note: VGA adapters also available. Consult factory API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58 FC12 Series 600 High-Density Filtered Connectors Pin/Socket Adapter Size A B C D E F G 15 1.213 (30.81) .984 (24.99) .640 (16.26) .304 (7.72) .505 (12.83) .666 (16.92) .333 (8.46) 26 1.541 (39.14) 1.312 (33.32) .968 (24.59) .304 (7.72) .505 (12.83) .994 (25.25) .333 (8.46) 44 2.088 (53.04) 1.852 (47.04) 1.508 (38.30) .304 (7.72) .505 (12.83) 1.534 (38.96) .333 (8.46) 62 2.729 (69.32) 2.500 (63.50) 2.156 (54.76) .304 (7.72) .505 (12.83) 2.182 (55.42) .333 (8.46) 78 2.635 (66.93) 2.406 (61.11) 2.062 (52.37) .416 (10.57) .615 (15.62) 2.079 (52.81) .420 (11.18) A C 1 E D .050 (1.27) .243 (6.17) Socket End B .238 (6.05) Socket 10° Pin F 1 1.000 (25.40) G .153±.005 (3.89±.13) dia. holes Pin End 78 size has 4 rows of contacts Pin or Socket to Solder Cup, PCB Mount and 90° PCB Mount Size A B C D E F G 15 1.213 (30.81) .984 (24.99) .505 (12.83) .666 (16.92) .333 (8.46) .757 (19.23) .420 (10.67) A 10° 10° D F 1 1 E C Mating Face B 26 1.541 (39.14) 1.312 (33.32) .505 (12.83) .994 (25.25) .333 (8.46) 1.085 (27.56) .420 (10.67) 44 2.088 (53.04) 1.852 (47.04) .505 (12.83) 1.534 (38.96) .333 (8.46) 1.625 (41.28) .420 (10.67) 62 2.729 (69.32) 2.500 (63.50) .505 (12.83) 2.182 (55.42) .333 (8.46) 2.273 (57.73) .420 (10.67) 78 2.635 (66.93) 2.406 (61.11) .615 (15.62) 2.079 (52.81) .440 (11.18) 2.170 (55.12) .527 (13.39) .120±.005 (3.05±.13) dia. holes Solder Cup .045 (1.14 ) .050 O.D. .026 (.66) (1.27) Min. I.D. .243 (6.17) P.C. Tail .025 (.64) dia. .050 (1.27) .238 (6.05) G .450 (11.43) Termination End .050 Boardlock (1.27) Centerline .243 (ø.125 (6.17) thru x2) .660 (16.76) .400 (10.16) .125 (3.18) .358 (9.09) Solder Cup .150 (3.81) .125±.020 (3.18±.508) .100 (2.54) ø.030 (.77) .350 (8.89) 90° PCB Mount .100 (2.54) .350 (8.89) .030 (7.62) Rd. .100 (2.54) .100 (2.54) 90° PCB Mount 78 line HD Dimensions in inches (mm) API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58 FC13