Feed-Through Insertion Loss Typical SMT Applications 80 Output Pi Input Ground Insertion Loss (dB) Feed-Through 50 40 30 20 Output 10 0 0.01 Ground Voltage Rating DC . . . . . . . 200 VDC @ - 55°C to +125°C DWV . . . . . . . . . . . . . . . . . 700 VDC Current Rating . . . . . . . . . . . . . . . . 20 Amps (Feed-through) max. .................. 10 Amps (Pi) max. Insulation Resistance. . . . . . . . . . . . . . 1.0 GΩ @ 25°C Dissipation Factor. . . . . . . . . . . . . . . . . 4.0% maximum D.C.R. . . . . . . . . . . . . . . . . Max. .0005Ω, typ. .0002Ω 0.1 1 10 Frequency (MHz) 100 1000 3000 Shielded or Partition Applications 80 * See note 70 0.01 uF 4000 pf 2500 pf 1500 pf 1000 pf 820 pf 470 pf 130 pf 100 pf 68 pf 60 Insertion Loss (dB) Input 0.01 uF 4000 pf 2500 pf 1500 pf 1000 pf 820 pf 470 pf 130 pf 100 pf 68 pf 60 PSM Series PSM * See note 70 Surface Mount Low Pass Filters 50 40 30 20 10 0 0.01 * AC rated parts available. Please consult factory. 0.1 1 10 Frequency (MHz) 100 1000 3000 * Capacitance values for insertion loss curves are displayed left to right in the order shown. PSM Pi Insertion Loss .026 (0.66) .120 (3.00) Sq. (both ends) .026 (0.66) Typical SMT Applications .057 (1.46) .120 (3.00) .010 (0.25) 100 90 * See note 4000 2500 1500 1000 820 470 130 100 68 .025 (0.63) Ref. .070 (1.75) (4x both ends) Middle terminal Insertion Loss (dB) 80 .235 (6.00) 70 60 50 40 30 pf pf pf pf pf pf pf pf pf 20 .315 (8.00) Max. 10 Tolerances: ± .010 (.254) 0 0.01 Dimensions in inches (mm) 0.1 1 10 Frequency (MHz) 100 1000 3000 Shielded or Partition Applications 100 90 Insertion Loss (dB) 80 70 60 50 40 30 * See note 4000 2500 1500 1000 820 470 135 100 68 pf pf pf pf pf pf pf pf pf 20 10 0 0.01 0.1 1 10 Frequency (MHz) 100 1000 3000 API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58 SM14 Surface Mount Low Pass Filters PSM Series PSM Ordering Information Example: PSM4-402Z-20T0 PSM Style PSM (Power) 4 Circuit Configuration 1 - Pi 4 - Feed-through ✝ Also available through API’s authorized distributors. - Code 680M 402Z Capacitance Value* 68 pF Tolerance ±20% ■ ■ 0 Tape and Reel Current Packaging Rating 10 - 10 Amps T - Tape and reel (Pi) packaging 20 - 20 Amps B - Bulk packaging (Feed-through) 100 pF ±20% 131P 130 pF +100/-0% 471P 470 pF +100/-0% 821M 820 pF ±20% 102M 1000 pF ±20% 152M 1500 pF ±20% 252P 2500 pF +100/-0% 402Z 4000 pF +80/20% * Other capacitance values available as special order. .01 µF +80/-20% ** Available in Feed-through circuit only. Technical Notes ■ T 101M 103Z** ■ 20 0 - 500 pieces 2 - 2,000 pieces Note: Tape and reel packaging 500 pieces (7") and 2,000 pieces (13") PSM Tape and Reel Packaging Soldering recommendations supplied upon request Reflow temperature limit is 250°C Unit weight is approximately 0.4 grams Tape and reel packaging available for automated assembly .150 (3.81) .013 (0.33) .059 (1.50) .157 (4.00) .079 (2.00) .295 (7.50) .069 (1.75) .320 (8.13) .630 (16.0) .315 (8.00) .133 (3.38) .059 (1.50) Dimensions in inches (mm) PSM Recommended Board Pattern .285 (7.25) Solder paste pattern Recommended pad, must be able to support continuous signal current X = 0.350" minimum for 1 oz. copper (0.036 mm thickness) X = 0.200" minimum for 2 oz. copper (0.071 mm thickness) For low current (10 Amp or less) X = 0.130" minimum for 1 oz. copper (0.036 mm thickness for 10 Amp and 0.5 oz. copper - 0.018 mm thickness for 5 Amp or less) Dimensions in inches (mm) X 0.10 (2.54) .070 (1.75) .050 (1.27) 120° .065 (1.65) .100 (2.54) .040 (1.00) min. .125 (3.20) API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58 SM15