NSC 54FCT521

54FCT521
8-Bit Identity Comparator
General Description
Features
The ’FCT521 is an expandable 8-bit comparator. It compares two words of up to eight bits each and provides a LOW
output when the two words match bit for bit. The expansion
input IA = B also serves as an active LOW enable input.
n Expandable to any word length
n Outputs sink capability of 32mA, source capability of 12
mA
n TTL input and output level compatible
n CMOS power consumption
n Standard microcircuit Drawing (SMD) 5962-8854301
Logic Symbols
Connection Diagram
Pin Assignment
for DIP and CERPACK
DS100968-1
IEEE/IEC
DS100968-2
Pin Assignment
for LCC
DS100968-4
DS100968-3
Pin Descriptions
Pin Names
Description
A0–A7
Word A Inputs
B0–B7
Word B Inputs
TA = B
Expansion or Enable Input
OA = B
Identity Output
FACT™ is a trademark of Fairchild Semiconductor Corporation.
© 1998 National Semiconductor Corporation
DS100968
www.national.com
54FCT521 8-Bit Identity Comparator
September 1998
Truth Table
Inputs
IA = B
L
L
H
H
Outputs
A, B
A = B (Note 1)
A≠B
A = B (Note 1)
A≠B
OA = B
L
H
H
H
H = HIGH Voltage Level
L = LOW Voltage Level
Note 1: A0 = B0, A1 = B1, A2 = B2, etc.
Logic Diagram
DS100968-5
Please note that this diagram is provided only for the understanding of logic operations and should not be used to estimate propagation delays.
www.national.com
2
Absolute Maximum Ratings (Note 2)
Storage Temperature (TSTG)
Junction Temperature (TJ)
CDIP
If Military/Aerospace specified devices are required,
please contact the National Semiconductor Sales Office/
Distributors for availability and specifications.
Supply Voltage (VCC)
DC Input Diode Current (IIK)
VI = −0.5V
VI = VCC + 0.5V
DC Input Voltage (VI)
DC Output Diode Current (IOK)
VO = −0.5V
VO = VCC + 0.5V
DC Output Voltage (VO)
DC Output Source
or Sink Current (IO)
DC VCC or Ground Current
per Output Pin (ICC or IGND)
−65˚C to +150˚C
175˚C
Recommended Operating
Conditions
−0.5V to +7.0V
−20 mA
+20 mA
−0.5V to VCC + 0.5V
Supply Voltage (VCC)
FCT
Input Voltage (VI)
Output Voltage (VO)
Operating Temperature (TA)
54FCT
−20 mA
+20 mA
−0.5V to VCC + 0.5V
4.5V to 5.5V
0V to VCC
0V to VCC
−55˚C to +125˚C
Note 2: Absolute maximum ratings are those values beyond which damage
to the device may occur. The databook specifications should be met, without
exception, to ensure that the system design is reliable over its power supply,
temperature, output/input loading variables. National does not recommend
operation of FACT™ circuits outside databook specifications.
± 50 mA
± 50 mA
DC Electrical Characteristics for ’FCT Family Devices
Symbol
Parameter
54FCT
Min
Units
VIH
Input HIGH Voltage
VIL
Input LOW Voltage
0.8
V
VCD
Input Clamp Diode Voltage
−1.2
V
VOH
Output HIGH Voltage
VOL
Output LOW Voltage
IIH
Input HIGH Current
VCC
Conditions
Max
2.0
V
Recognized HIGH Signal
Min
54FCT
4.3
V
Min
54FCT
2.4
V
Min
54FCT
0.2
V
Min
54FCT
0.5
V
Min
5
µA
Max
Recognized LOW Signal
IIN = −18 mA
IOH = −300 µA
IOH = −12 mA
IOL = 300 µA
IOL = 32 mA
VIN = VCC
VIN = 0.0V
VOUT = 0.0V
IIL
Input LOW Current
−5
µA
Max
IOS
Output Short-Circuit Current
-60
mA
Max
ICCQ
Quiescent Power
Supply Current
1.5
mA
Max
∆ICC
Quiescent Power
Supply Current
2.0
mA
Max
ICCD
Dynamic ICC
0.25
mA/
MHz
Max
VCC = 5.5V, Outputs Open,
One Bit Toggling, 50% Duty
Cycle, OEn = GND
ICC
Total Power Supply
Current
5.0
mA
Max
VCC = 5.5V, Outputs Open, fI
= 10MHz, OEn = GND, One
Bit Toggling, 50% Duty Cycle
VIN < 0.2V or VIN 5.3V, VCC =
5.5V
VI = VCC − 2.1V
Note 3: All outputs loaded; thresholds on input associated with output under test.
Note 4: Maximum test duration 2.0 ms, one output loaded at a time.
3
www.national.com
AC Electrical Characteristics for ’FCT Family Devices
Symbol
Parameter
TA = −55˚C to +125˚C
CL = 50 pF
VCC
(V)
tPLH
Propagation Delay
An or Bn to OA
tPHL
tPLH
tPHL
= B
to OA
= B
to OA
Max
5.0
1.5
15.0
ns
5.0
1.5
15.0
ns
5.0
1.5
9.0
ns
5.0
1.5
9.0
ns
= B
Propagation Delay
IA
Min
= B
Propagation Delay
IA
(Note
5)
= B
Propagation Delay
An or Bn to OA
Units
= B
Note 5: Voltage Range 5.0 is 5.0V ± 0.5V
Capacitance
Typ
Units
CIN
Symbol
Input Capacitance
4.5
pF
CPD
Power Dissipation Capacitance
40
pF
www.national.com
Parameter
4
Conditions
VCC = OPEN
VCC = 5.0V
Applications
Ripple Expansion
DS100968-6
Parallel Expansion
DS100968-7
5
www.national.com
Physical Dimensions
inches (millimeters) unless otherwise noted
20-Lead Ceramic Leadless Chip Carrier
Package Number E20A
www.national.com
6
Physical Dimensions
inches (millimeters) unless otherwise noted (Continued)
20-Lead Ceramic Dual-in-line
J20A
20-Lead Cerpack
Package Number W20A
7
www.national.com
54FCT521 8-Bit Identity Comparator
LIFE SUPPORT POLICY
NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein:
2. A critical component in any component of a life support
1. Life support devices or systems are devices or sysdevice or system whose failure to perform can be reatems which, (a) are intended for surgical implant into
sonably expected to cause the failure of the life support
the body, or (b) support or sustain life, and whose faildevice or system, or to affect its safety or effectiveness.
ure to perform when properly used in accordance
with instructions for use provided in the labeling, can
be reasonably expected to result in a significant injury
to the user.
National Semiconductor
Corporation
Americas
Tel: 1-800-272-9959
Fax: 1-800-737-7018
Email: [email protected]
www.national.com
National Semiconductor
Europe
Fax: +49 (0) 1 80-530 85 86
Email: [email protected]
Deutsch Tel: +49 (0) 1 80-530 85 85
English Tel: +49 (0) 1 80-532 78 32
Français Tel: +49 (0) 1 80-532 93 58
Italiano Tel: +49 (0) 1 80-534 16 80
National Semiconductor
Asia Pacific Customer
Response Group
Tel: 65-2544466
Fax: 65-2504466
Email: [email protected]
National Semiconductor
Japan Ltd.
Tel: 81-3-5620-6175
Fax: 81-3-5620-6179
National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.