ETC 74AC05SCX

Revised September 2001
74AC05
Hex Inverter with Open Drain Outputs
General Description
Features
The AC05 contains six inverters.
■ Outputs sink 24 mA
■ Open drain for wired NOR function
■ Radiation tolerant FACT process
Ordering Code:
Order Number
Package Number
74AC05SC
M14A
Package Description
14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow
Device also available in Tape and Reel. Specify by appending suffix letter “X” to the ordering code.
Logic Symbol
Connection Diagram
IEEE/IEC
Pin Descriptions
Pin Names
Description
An
Inputs
On
Outputs
FACT is a trademark of Fairchild Semiconductor Corporation.
© 2001 Fairchild Semiconductor Corporation
DS010941
www.fairchildsemi.com
74AC05 Hex Inverter with Open Drain Outputs
August 1991
74AC05
Absolute Maximum Ratings(Note 1)
Recommended Operating
Conditions
−0.5V to +7.0V
Supply Voltage (VCC )
DC Input Diode Current (IIK)
VI = −0.5V
−20 mA
VI = VCC + 0.5V
+20 mA
DC Input Voltage (VI)
Supply Voltage (VCC)
−0.5V to VCC + 0.5V
0V to VCC
Output Voltage (VO)
0V to 6.0V
−40°C to +85°C
Operating Temperature (TA)
Minimum Input Edge Rate (∆V/∆t)
DC Output Diode Current (IOK)
VO = −0.5V
−20 mA
VO = VCC + 0.5V
+20 mA
DC Output Voltage (VO)
2.0V to 6.0V
Input Voltage (VI)
VIN from 30% to 70% of VCC
VCC @ 3.3V, 4.5V, 5.5V
−0.5V to +7.0V
125 mV/ns
DC Output Source
± 50 mA
or Sink Current (IO)
Note 1: Absolute maximum ratings are those values beyond which damage
to the device may occur. The databook specifications should be met, without exception, to ensure that the system design is reliable over its power
supply, temperature, and output/input loading variables. Fairchild does not
recommend operation of FACT circuits outside databook specifications.
DC VCC or Ground Current
± 50 mA
per Output Pin (ICC or IGND)
Storage Temperature (TSTG)
−65°C to +150 °C
DC Electrical Characteristics
Symbol
VIH
VIL
VOL
Parameter
VCC
TA = +25°C
TA = −40°C to +85°C
(V)
Typ
Guaranteed Limits
Minimum HIGH Level
3.0
1.5
2.1
2.1
Input Voltage
4.5
2.25
3.15
3.15
5.5
2.75
3.85
3.85
Units
Conditions
VOUT = 0.1V
V
or VCC − 0.1V
VOUT = 0.1V
Maximum LOW Level
3.0
1.5
0.9
0.9
Input Voltage
4.5
2.25
1.35
1.35
5.5
2.75
1.65
1.65
Maximum LOW Level
3.0
0.002
0.1
0.1
Output Voltage
4.5
0.001
0.1
0.1
5.5
0.001
0.1
0.1
3.0
0.32
0.44
4.5
0.36
0.44
5.5
0.36
0.44
5.5
±0.1
±1.0
µA
VI = VCC, GND
6
+0.5
+10.0
µA
VIN = GND, VO = 6V
5.5
50
75
mA
VOLD = 1.65V Max
5.5
4.0
20.0
µA
VIN = VCC or GND
V
or VCC − 0.1V
V
IOUT = 50 µA
VIN = VIL or VIH
IIN (Note 4)
Maximum Input Leakage Current
IOHZ
Off-State Current
IOLD
Minimum Dynamic
Output Current (Note 3)
ICC (Note 4) Maximum Quiescent Supply Current
Note 2: All outputs loaded; thresholds on input associated with output under test.
Note 3: Maximum test duration 2.0 ms, one output loaded at a time.
Note 4: IIN and ICC @ 3.0V are guaranteed to be less than or equal to the respective limit @ 5.5V VCC.
www.fairchildsemi.com
2
IOL = 12 mA
V
IOL = 24 mA
IOL = 24 mA (Note 2)
TA = +25°C
VCC
Symbol
Parameter
CL = 50 pF
(V)
(Note 5)
tPLZ
tPZL
TA = −40°C to +85°C
Min
Max
Min
Min
Propagation Delay
3.3
2.0
14.5
2.0
14.5
(Note 6)
5.0
2.0
14.0
2.0
14.0
Propagation Delay
3.3
2.0
6.5
2.0
6.5
5.0
2.0
5.0
2.0
5.0
Units
ns
ns
Note 5: Voltage Range 3.3 is 3.3V ± 0.3V
Voltage Range 5.0 is 5.0V ± 0.5V
Note 6: AC Load is VCC x 2, RL = 1 kΩ
CL = 50 pF
Capacitance
Typ
Units
CIN
Symbol
Input Capacitance
Parameter
4.5
pF
VCC = 5.0V
CPD
Power Dissipation Capacitance
30.0
pF
VCC = 5.0V
3
Conditions
www.fairchildsemi.com
74AC05
AC Electrical Characteristics
74AC05 Hex Inverter with Open Drain Outputs
Physical Dimensions inches (millimeters) unless otherwise noted
14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow
Package Number M14A
Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and
Fairchild reserves the right at any time without notice to change said circuitry and specifications.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD
SEMICONDUCTOR CORPORATION. As used herein:
2. A critical component in any component of a life support
device or system whose failure to perform can be reasonably expected to cause the failure of the life support
device or system, or to affect its safety or effectiveness.
1. Life support devices or systems are devices or systems
which, (a) are intended for surgical implant into the
body, or (b) support or sustain life, and (c) whose failure
to perform when properly used in accordance with
instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the
user.
www.fairchildsemi.com
www.fairchildsemi.com
4