Cartridge Fuse Holders Enclosed Fuseholders > Panel Mounted 601/602 Series Shock-Safe Panel Mount Fuse Holder for 5×20mm Fuses Product Characteristics Compatible Fuses 5×20mm Holder: Black Duroplast Phenolplast PF, UL94 V-0 601 Series Holder 602 Cap Materials Cap: Black Thermoplastic Polyamide PA6.6, UL94 V-0 Sealing Washer: Novapress Multi (Cap 602 04) Design 00: without silicon washer (IP 40) Metal Parts: Copper alloy, corrosion protected Design 04: with silicon washer (IP 54) (from front side only) Terminals: Solderable, tinned Rated Voltage: 250V Electrical Data (23ºC) Rated Current: 6 .3A (SEMKO/VDE) 16A (UL/CSA) Rated Power : 4W (SEMKO/VDE) Dimensions (in mm) 602 Cap 20 12.7mm diameter D-hole Admissible torque on plastic hex nut is 1.2Nm Terminals Solderable or 2.8mm quick connect-fits 0.5mm tab Protection Class & Category IP 40 (with Cap 602 00 acc. to IEC 60529) IP 54 (with Cap 602 04 acc. to IEC 60529) PC2 (IEC 60127-6) Operating Temperature -25ºC to +70ºC (consider de-rating) Climatic Test -25ºC/+70ºC/21 days (IEC 60068-2-1...3) Stock Conditions +10ºC to +60ºC relative humidity ≤ 75% yearly average, without dew, maximum value for 30 days - 95% Vibration Resistance 24 cycles at 15 min. each (IEC 60068-2-6) 10 - 60Hz at 0.75mm amplitude 60 - 2000Hz at 10g acceleration Dielectric Strength > 1.5 kV Impulse Voltage 4 kV, 50 Hz, 1 min., dry Insulation Resistance > 103 MΩ (500 VDC, 1 min.) Solderability 235ºC, 3 sec. (Wave) 350ºC, 1 sec. (Soldering Iron) Soldering Heat Resistance 260ºC, 5 sec. (IEC 60068-2-20) Minimum Cross Section Conductor - 2.5mm2 Marking 601, 250V, Approvals Unit Weight 4.0g (Holder) / 1.9g (Cap) Standards IEC 60127-6 UL 512 CSA C22.2, No. 39 12,5 10,85 Mounting 601 Holder SW 14 M12,7x1,5 1,7 35,5 Agency Approvals Agency UL Recognized file number E 70164 7,1 5 Agency File Number SEMKO certificate 608494 3,2 1...6 5,8 3,2 12,1 7,1 5 6 2,8 ∅15,5 0,5 5 0,5 12 -0,1 CSA Certified: file number 47574 VDE License Number 132224 12,7 -0,1 Panel opening Additional Information Ordering Information (Packaged bulk 100 pieces) Item Ordering Number Holder 601 0000 000 Cap, without washer, IP 40 602 0000 000 Cap, with washer, IP 54 602 0000 040 Notes: - Please also refer to Littelfuse series 850 and 851 for new designs - 1.00 means one with two decimal places and 1,000 means the number one thousand Datasheet 601 Series Resources 601 Series Samples 601 Series Datasheet 602 Series Resources 602 Series Samples 602 Series © 2013 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 12/19/13