Cartridge Fuse Holders Enclosed Fuseholders > Circuit Board Mounted 596/583 Series Circuit Board Mount Enclosed Fuse Holders for 5×20mm Fuses RoHS Pb Product Characteristics Compatible Fuse Types 5×20mm Holder: Duroplastic, black Cap: Thermoplastic, UL 94 V-0, black Materials 583 Cap IP 40 (IEC 60529) Operating Temperature -25 °C to 70 °C Stock Conditions 10 °C to 60 °C Contact Resistance ≤ 5mΩ Dielectric Strength 3 kV, 50Hz, 1 min., dry Insulation Resistance > 10 MΩ (500 V DC, 1 min.) Solderability 235 ºC, 3 sec. (Wave) 350 ºC, 1 sec. (Soldering Iron) Soldering Heat Resistance 260 °C, 5 sec. Minimum Cross Section Conductor - 0.2mm2 ±0,1 Max. Current/Power: 6.3 A / 2.0 W (2) Solder pins0.5×1.1mm Marking 596, 250 V Unit Weight 2,2 g (596) / 1,7 g (583) 12 ±0,2 23-0,5 ø10,5 +0,2 1,1 +0,1 5,25 +0,1 +1 5 -0,5 11,7 ±0,2 +0,05 12,5 Rated Voltage: 250V Protection Class & Category Units in Millimeters 0,5 Electrical Data (23ºC) Mounting Dimensions 4 ±0,2 Terminals: Solderable, tinned 10,25 596 Series Holder FLUSH MOUNT TYPE Metal Parts: Copper alloy, corrosion protected Note: 1.00 means the number one with two decimal places. 1,000 means the number one thousand. Printed Circuit Board 1,25 ±0,15 +0,2 Ordering Information ø1,3 12,5 +0,2 Description Ordering Number Packaging Cap, 5×20 mm 58300000005 Bulk 100 596 Series Holder 59600000005 Bulk 100 Holes in the Printed Circuit Board Additional Information ±0,4 -0,2 15,7 ø10,3 Bayonet-connector-nose 8,5 ±0,5 Datasheet Resources Samples Slot for screw-driver © 2015 Littelfuse, Inc. Specifications are subject change recommended. without notice. Specifications are subject to change without notice. Application testing istostrongly Revised: 06/04/15