Rev B DTA150A-E Series With Active PFC To 150 Watts, Single Output AC/DC Desktop Power Supply FEATURES ● Single Output ● High Reliability ● RoHS Compliant ● 40mm Cooling Fan ● Input: 90~264 VAC ● AC Input: IEC-320-C14 Inlet ● Total Power: 110~150 Watts ● 100% Hi-pot and Burn-in Tested ● Safety Approvals, EMC Compliance ● Over Voltage, Over Load, and Short Circuit Protected DESCRIPTION The DTA150A-E series are highly reliable desktop power supplies with an input voltage range of 90~264VAC. All supplies have a single output, active PFC, 40mm cooling fan, and an IEC-320-C14 AC inlet connector. These supplies also have over voltage, over load, and short circuit protection. This series has been 100% burn-in and hi-pot tested. SPECIFICATIONS: DTA150A-E Series All specifications apply @ ±25°C ambient unless otherwise noted INPUT SPECIFICATIONS ENVIRONMENTAL SPECIFICATIONS Input Voltage Range ............................. 90 – 264 VAC (full range) Operating Temperature ............................................. 0°C to +50°C Input Frequency ............................................................. 47 - 63Hz Storage Temperature............................................... -10°C to+70°C Input Current (rms).............. 2.5A @ 90VAC; 1A @ 264VAC max. Humidity....................................................................... 20% to 90% Power Factor.......................................................> 0.9 @ 115VAC MTBF .............. >100,000 hrs at FL and 25°C ambient temperature OUTPUT SPECIFICATIONS PHYSICAL SPECIFICATIONS Output Current ................................................................ see table Dimensions (L x W x H) ...........................7.42 x 4.11 x 2.36 inches 188.5 x 104.5 x 60 mm Output Voltage ................................................................ see table Maximum Power .................................................................. 150W AC Inlet ...................................................................... IEC-320-C14 Ripple/Noise (20 MHz BW) ...................................................... 1% SAFETY & EMI Hold Up Time ................... > 10ms typical at full load and 115VAC Safety Standards ..........................................................UL 60950-1 ...................................................................CSA C22.2-No.60950-1 .............................................................................. TUV EN60950-1 .............................................................................. CB IEC 60950-1 PROTECTION Short Circuit Protection ........................................... Auto-recovery Over Load Protection .............................................. Auto-recovery Over Voltage Protection ..............................................AC Recycle EMC Standards ..........................................................FCC Class B ............................................................................ CISPR22 Class B ........................................................................... EN 55022 Class B ................................................................................................... CE GENERAL SPECIFICATIONS Efficiency...................................... >8 0% @ full load and 115VAC Due to advances in technology, specifications subject to change without notice 01/11/2011 Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 1 of 2 Rev B DTA150A-E Series With Active PFC To 150 Watts, Single Output AC/DC Desktop Power Supply MODEL SELECTION TABLE Model ● DTA-110A2-1Y-050E ● DTA-110A2-1Y-060E ● DTA-110A2-1Y-070E ● DTA-130A2-1Y-080E ● DTA-130A2-1Y-090E ● DTA-130A2-1Y-100E ● DTA-130A2-1Y-110E DTA-150A2-1Y-120E ● DTA-150A2-1Y-130E ● DTA-150A2-1Y-140E DTA-150A2-1Y-150E ● DTA-150A2-1Y-160E DTA-150A2-1Y-170E DTA-150A2-1Y-180E DTA-150A2-1Y-190E DTA-150A2-1Y-200E ● DTA-150A2-1Y-210E ● DTA-150A2-1Y-220E ● DTA-150A2-1Y-230E DTA-150A2-1Y-240E ● DTA-150A2-1Y-320E ● DTA-150A2-1Y-330E DTA-150A2-1Y-360E DTA-150A2-1Y-480E Input Voltage 90 – 264 VAC 90 – 264 VAC 90 – 264 VAC 90 – 264 VAC 90 – 264 VAC 90 – 264 VAC 90 – 264 VAC 90 – 264 VAC 90 – 264 VAC 90 – 264 VAC 90 – 264 VAC 90 – 264 VAC 90 – 264 VAC 90 – 264 VAC 90 – 264 VAC 90 – 264 VAC 90 – 264 VAC 90 – 264 VAC 90 – 264 VAC 90 – 264 VAC 90 – 264 VAC 90 – 264 VAC 90 – 264 VAC 90 – 264 VAC Output Voltage 5 VDC 6 VDC 7 VDC 8 VDC 9 VDC 10 VDC 11 VDC 12 VDC 13 VDC 14 VDC 15 VDC 16 VDC 17 VDC 18 VDC 19 VDC 20 VDC 21 VDC 22 VDC 23 VDC 24 VDC 32 VDC 33 VDC 36 VDC 48 VDC Output Current 22A 18.3A 15.7A 16.3A 14.4A 13A 11.8A 12.5A 11.5A 10.7A 10A 9.4A 8.8A 8.3A 7.9A 7.5A 7.1A 6.8A 6.5A 6.3A 4.7A 4.5A 4.2A 3.1A Output Power 110W 110W 110W 130W 130W 130W 130W 150W 150W 150W 150W 150W 150W 150W 150W 150W 150W 150W 150W 150W 150W 150W 150W 150W NOTES 1. “●” represents “Safety Pending”. 2. Ripple & Noise is measured peak–to–peak with 20MHz bandwidth with a tantalum 10uF in parallel with a 0.1uF ceramic capacitor. 3. AC Inlet: IEC-320-C14 Standard. MECHANICAL DRAWINGS Unit: inches (mm) 01/11/2011 Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 2 of 2