Our Products for Your Reliable Supply Chain Catalogue 2016/2017 LINES CLASSES More than 60 years of experience in the field of power electronics, a comprehensive portfolio of chips, modules and inverter systems, a global network of production plants and sales offices as well as our highly qualified staff – these are our success factors. SEMIKRON’s power electronics components and systems primarily address the medium output range (approx. 2kW up to 10MW). Our products are at the heart of modern energy efficient motor drives and industrial automation systems. Further application areas include power supplies, renewable energies (wind and solar power) and utility vehicles. SEMIKRON’s innovative power electronic products enable our customers to develop smaller, more energy efficient power electronic systems. These systems in turn reduce the global energy demand. SEMIKRON 1 SEMITOP E1/E2 ® LINES CLASSES Highlights SEMITOP E1/E2 ® The alternative to consolidated standard industrial packages for customers’ supply chain safety SEMITOP 2nd generation fulfils the SEMIKRON target to offer a safety supply chain to the customers. The new packages represent the SEMITOP platform’s natural evolution at the same high performance levels, set to offer the best footprint, a flexible architecture and high performing solutions at optimised system cost. Full compatibility with the existing standard industrial packages is ensured: modules with 12mm height, without baseplate, two lateral mounting screws coupled with a solderfree pin grid philosophy. The latest Si and SiC chip technologies can be integrated so to offer a competitive platform. Thus able to address the power modules demanding environment where high performance, innovation and differentiation are the key winning factors. Thanks to a comprehensive portfolio with a large variety of configurations, SEMITOP E1 and E2 can address different markets like UPS, solar, motor drives, power supplies and the new emerging EV battery charger market. MotorSolar DrivesEnergy 2nd Source Power Supplies Utility Vehicles 2nd Source Supply chain safety, exceeding the standard Ensuring the highest supply chain safety to the customer is one of the main targets for SEMIKRON. The development and release of industry standard packages as well as the introduction of new IGBT chip sources reflect that strategy. Beside the Infineon and Fuji chips also Vishay, ABB and Renesas IGBT chips are available in 650V, 1200V and 1700V. Thanks to thermal and switching performance optimisations in the standard packages and the integration of additional functionality such as AC current measurement shunts in the modules SEMIKRON is even exceeding the industry standard. MotorWind Solar Power Utility Urban Transport Drives EnergyEnergyQualityVehiclesEquipment 2 SEMIKRON SEMIKRON 3 SEMITRANS 20 ® LINES CLASSES Highlights SEMITRANS 20 ® New standardised medium voltage package – the SEMITRANS20 overcomes the limits of conventional medium voltage module concepts and provides a new design approach for inverters in applications such as transportation, industrial drives and grid infrastructure. Optimised for the medium voltage market with the latest 3.3kV IGBTs, the SEMITRANS20 is designed as a half bridge configuration featuring a build-in temperature sensor and opposite DC and AC power terminals. Compared to conventional modules, the stray inductance is reduced by up to 75%, thus providing higher operational safety and easy paralleling. The new SEMITRANS20 allows a higher degree of scalability and flexibility in medium voltage inverter design. The standardised package meets the increasing demands for lower cost, higher efficiency and durability for power electronics in industry, transportation and infrastructure. MotorWind Solar Power Urban Transport Drives EnergyEnergyQualityEquipment High Performance Thermal Paste High Performance Thermal Paste Outstanding thermal performance – Beside a standard silicone based and a silicon free thermal grease, a phase change material and the new high performance thermal paste with an improved thermal performance are available. SEMIKRON formulated a clear strategy that phase change materials will be applied on modules with baseplate only and thermal greases on modules without a baseplate. The new high performance thermal paste is the SEMIKRON solution to boost the performance for modules without baseplate. A reduction of the thermal resistance by up to 50% is possible which goes along with a module output power increase by up to 25% or a lifetime enhancement by several decades. 4 SEMIKRON SEMIKRON 5 SKYPER Prime O ® LINES CLASSES Highlights SKYPER Prime O ® Regenerative converters are driven by two main market requirements. Increasing the output power and reduction of cost. SEMITRANS10 and SKYPER Prime O is a fully qualified Plug & Play bundle with optimised SOA characteristics. This saves costly qualification and redesign loops and at the same time offers significant performance advantages in various applications. SKYPER Prime O offers galvanically insulated, highly accurate DC-link and temperature signals as a PWM signal to the controller. So very compact high power inverters can be built without costly sense circuits, cabling effort or power supplies. In addition, second source requirements are covered even on the driver and module side. Electrical and optical interfaces are available. WindSolar Power Urban Transport Energy Energy Quality Equipment SKYPER 12 ® SKYPER 12 ® New solutions in drives focus on improving the power density and by that reducing size and cost. SKYPER12 is an IGBT driver core, smaller than a matchbox but with a 20A output stage. Thanks to a complete ground layer, adjustable input filter and optimised transformers with low coupling capacitance, the driver core can work properly in very compact designs with a high level of electromagnetic compatibility. The new ASIC chipset offers safe short circuit handling with soft switch off and fast mode detection. Thanks to integration, an MTBF rate of up to eight million hours at full load can be realised. With that feature set the SKYPER12 IGBT driver core offers the optimised platform for IGBT modules in the range from 80A - 300A. Reference circuits for SEMiX5, MiniSKiiP Dual and SEMiX3 Press-Fit support customers for efficient driver integration. 6 SEMIKRON MotorSolar DrivesEnergy Power Quality Power Supplies SEMIKRON 7 SEMIKUBE ® LINES CLASSES Highlights SEMIKUBE ® 2-level but 1500V DC with intelligent switching Following the solar trend to increase DC voltage, SEMIKUBE extends its range with a 1300A, 2-level inverter, able to operate up 1500V. Using state-of-the-art IntelliOff driving technology, the inverter provides safe operation under all conditions. The high robustness of the CAL diode against cosmic rays, gives a very low failure rate. Designed within the same footprint as standard size 3, the known benefits of the SEMIKUBE are present, to provide a fast and cost effective alternative to 3-level solutions. MotorSolar Power DrivesEnergy Supplies CLASSIC SKSE CLASSIC SKSE Modular high current rectifier – Extending the CLASSICS range, the CLASSICS SKSE is a modular product specially optimised for rectifiers, but other configurations can be realised as well. Using the well established capsule technology, the new Z5 heatsink profile, simplify stack construction and provide modularity. Able to accommodate high performance axial fans, customisation is possible to achieve fan redundancy, or other fan supply voltages. The CLASSICS SKSE range, dedicated to low voltage applications (500Vac), is by design, easily scalable to a higher voltage range. MotorWind Power DrivesEnergy Quality 8 SEMIKRON SEMIKRON 9 LINES CLASSES Content Product Lines Overview Productlines 13 1 Product Classes 01 IGBT Modules 48 02 Silicon Carbide Modules, Full SiC, Hybrid SiC 84 03 MOSFET Modules 96 04 Thyristor / Diode Modules 102 05 Bridge Rectifier Modules 116 06 Intelligent Power Module – IPM 132 07 IGBT Driver 144 08Stacks 148 09Systems 160 10Discretes, Chips, Discrete diodes, Discrete thyristors 168 11Accessories, Heatsinks, Fans, Thermal Paste 182 3 4 5 6 Service & Contact SEMIKRON Online Shop Product Sample Request 2 194 195 7 Technical Seminars196 SemiSel Simulation197 Applications 198 8 Technologies199 Application Manual200 9 Abbreviations201 Worldwide Contact 202 10 11 10 SEMIKRON SEMIKRON 11 LINES CLASSES Product Lines Modules MiniSKiiP 14 SEMITOP 16 SEMiX 18 SEMITRANS 20 SKiM 22 SEMIPONT 24 SEMIPACK 26 SEMiSTART 28 SKiiP 30 IGBT Driver SKYPER 1 2 3 4 32 5 Stacks SEMISTACK CLASSIC 34 SEMISTACK RE 36 SEMIKUBE 38 SKiiPRACK 40 6 7 Systems SKAI 42 8 Discretes Discrete Diodes / Discrete Thyristors / Rectifiers Bridges44 9 10 11 12 SEMIKRON SEMIKRON 13 LINES MiniSKiiP CLASSES ® Fast, cost efficient and reliable one screw mounting Low cost assembly, high production run rate, high yield Small and compact inverter design High reliability and long product life time Benefits Applications An important mechanical feature of MiniSKiiP modules is the With almost 2 decades of field experience and more than outstanding easy assembly and service friendly spring-contact 30 million modules in the field, this module platform has proven for load and gate terminals. Compared to conventionally solde- successful in all standard applications. Key applications include red modules, where expensive soldering equipment is required all kinds of inverters, such as standard drives, stand-alone for time-consuming solder processes, no special tools are nee- drives, servo drives, system drives, solar inverters, UPS systems ded for MiniSKiiP assembly. Instead, a single screw connection and welding machines. Due to the high reliability of spring con- is used. The printed circuit board (PCB), the power module and tacts, applications such as agricultural vehicles or pitch motors the heat sink are assembled in one mounting step. of windmills benefit from the MiniSKiiP technology as well. This connection technology features a number of additional advantages: the PCB can be more flexible in design, as the power circuit board does not need to include holes for solder Product range pins. The springs provide a flexible connection between the MiniSKiiP modules are designed for 600V/650V, 1200V and PCB and the power circuitry which is far superior to a soldered 1700V with 4A - 400A nominal chip currents, and feature Trench joint, particularly under thermal or mechanical stress condi- IGBT technology in combination with the SEMIKRON CAL diodes. tions which can affect lifetime. Thanks to the high mechanical 1200V Trench IGBT4 and CAL 4 diodes are designed for maxi- pressure provided by the springs, an air-tight, reliable electrical mum junction temperatures of 175°C. In addition to CIB, 6-pack, connection is achieved. twin 6-pack, H-bridge, half bridge, 3-level and uncontrolled/ half-controlled rectifiers plus brake chopper, customer-specific modules are also available. For fast evaluation, lab test boards Key features can be ordered for each module type. -- Solder-free SPRiNG Technology for fast and easy assembly -- Without copper baseplate for cost efficient concept -- Easy and flexible PCB routing without pin holes -- Current range 4A to 400A for inverter range up to 90kW with one product platform -- Comprehensive setup of topologies: CIB, 6-pack, twin 6-pack, H-bridge, half bridge, 3-level, bridge rectifiers with brake chopper MotorSolar Power Power DrivesEnergy Quality Supplies 14 SEMIKRON – Modules Further information: www.semikron.com/miniskiip Modules – SEMIKRON 15 LINES SEMITOP CLASSES ® Flexibility for high integration level and high performances Complex topologies in compact space Simple pin routing thanks to terminal edge positioning Low inductance design philosophy coupled with latest chip technologies Benefits Applications Complete family of fully compatible 12mm height modules for SEMITOP is a useful product in the low and medium power solder or solder free assembly to the PCB. One screw module range where flexibility and high integration levels are required. for easy, fast and reliable assembly. Pins on the edges allow for Latest available chip technologies and the ability to offer more internal available space to fit the most complex topolo- compact designs make this product suitable for different and gies. Three level inverters are, for example, integrated in new high performing configurations like three level inverter SEMITOP3 and SEMITOP4 housings. Low inductance design (NPC and TNPC), double boost and interleaved boost approach together with Si and SiC technologies available to applications covering different markets like UPS, solar, motor offer the best in class solutions. drives and welding. Product range SEMITOP may include fast Si diode, fast IGBTs and MOSFETs even for high voltage. SiC Schottky diode and MOSFET can be evaluated as well. Thus a lot of different configuration with different chip combinations are possible: - NPC inverter up to 150A/650V - TNPC inverter up to 150A/1200V-100A/650V - Three-phase inverter up to 200A/600V and 100A/1200V Key features - CIB configurations up to 100A/600V and 50A/1200V - MOSFET configurations up to 300A - Three-phase bridge rectifier with DC output current up to 100A - Many other configurations are available -- One central mounting screw for low mounting cost -- Non-baseplate design -- Insulated module -- Low thermal resistance thanks to homogeneous pressure distribution -- Through hole solder pin terminals and press-fit terminals -- High integration level possible for compact design -- 12mm height SolarPower Motor Power EnergyQuality Drives Supplies 16 SEMIKRON – Modules Further information: www.semikron.com/semitop Modules – SEMIKRON 17 LINES SEMiX CLASSES ® IGBT and rectifier module family for solder-free mounting Reliable spring or press-fit connection Direct driver assembly Flat and compact inverter design Benefits Applications The family concept of SEMiX includes a unification of IGBT and SEMiX is a flexible and application oriented module. On the rectifier housings. All have the same height (17mm) and can be basis of a scalable platform concept, modern chip technology connected by one principle DC-link design, due to having the is integrated into IGBT and rectifier modules which are used in same interface for IGBT and rectifier stage. This saves deve- a wide variety of applications, such as AC motor drives, swit- lopment time and makes a simple and low-inductance DC-link ching power supplies and current source inverters. Other typical profile possible. Spring or press-fit contacts allow for a gate applications include matrix converters, uninterruptible power driver mounted directly on top of the module. So there is no supplies and electronic welding devices. risk of noise on wires or loose connectors. With the flat package and separated AC and DC terminals a state-of-the-art inverter construction is possible, which is very compact. The auxiliary Product range contacts avoid solder joints and offer highly reliable pressure Eight different housing sizes are available in the voltage classes contacts. This leads to an increased product reliability and life- 600V, 1200V and 1700V for the IGBT modules. Half-bridge, time. The solder-free contacts offer a fast and easy assembly 6-pack and chopper topologies are available with a current process and especially spring contacts are user friendly with range from 75A to 600A. Besides IGBT 3 and IGBT 4 chips, the regard to servicing. Production at the customer site can be opti- 1200V range also includes a series with V-IGBT devices. mised by uniform direction of assembly (everything top down). Controlled, half-controlled and uncontrolled rectifier modules This simplifies logistics and reduces manufacturing costs. Using with identical footprint and 17mm height are also available. the scalability of SEMiX housings, with one basic design a com- Latest packages are available with current sensing shunt resis- plete inverter line can be built with less effort. In consequence tor, 3-level topologies (NPC, T-NPC) or as buck-boost converters. the overall costs can be reduced. Key features -- Available in 600V, 1200V and 1700V and from 75A to 600A -- Multiple IGBT sources -- Solder free contacts for highest durability -- Comprehensive topologies for 2- and 3-level applications Now also available with current sensing shunt resistor Motor Wind Solar Power Power Urban Transport DrivesEnergy Energy Quality Supplies Equipment 18 SEMIKRON – Modules Further information: www.semikron.com/semix Modules – SEMIKRON 19 LINES SEMITRANS CLASSES ® Low inductance package design down to 10 nH Safe operation with high DC-link voltages Maximum power output Multiple IGBT sources Benefits Applications The SEMITRANS package provides a low-inductive design The proven package is designed for a broad range of appli- down to 10nH which can be used for AC/DC inverters from cations like regenerative inverters and power supplies. 20kW to 1.5MW. The modules are available up to 1400A The long service life fits perfectly to ambitious applications and 1700V. Availability is ensured by different IGBT sources. like AC drives, switched reluctance and DC motors. With a market experience of over 25 years the SEMITRANS packages offers a well proven standard design. Product range The SEMITRANS family offers a broad range of topologies and power ranges. All standard voltage classes from 600V to 1700V can be chosen. The current rating extends from 25A to 1400A. And the SEMITRANS package is available as half bridge, chopper, single switch, MLI and common emitter. Key features -- Topologies: half bridge, chopper, single switch, MLI, common emitter -- Isolated copper baseplate using DBC Technology -- With integrated gate resitor -- High isolation voltage MotorWind Solar Power Power Urban Transport DrivesEnergy Energy Quality Supplies Equipment 20 SEMIKRON – Modules Further information: www.semikron.com/semitrans Modules – SEMIKRON 21 LINES ® CLASSES SKiM 100% solder-free ensures durability No solder delamination thanks to sintered chips – SKiM 63/93 1500 temperature cycles without failure – SKiM 63/93 More than 60000 power cycles with a temperature swing of 110K – SKiM 63/93 Pressure contact SKiiP-Technology Up to 23% more performance with AlCu-bonded diodes and high performance thermal grease Benefits Applications The SKiM modules can increase the reliability of inverters by The SKiM 63/93 is designed for applications that require high several factors, even under substantial active and passive inverter reliability. First of all this applies, of course, to auto- temperature swings. In addition to sintered chips, pressure motive applications such as electric powertrains in electric contacts and springs technologies with AlCu-bonded diodes and utility vehicles, heavy-duty construction machinery and high performance thermal grease the SKiM63/93 module shows tractors, or even provide leading-edge performance in super up to 23.3% performance improvement with the same chip-set sports and race cars. The SKiM 4/5 with its proven 3-level and same lifetime or twice the power cycling capability in topologies can be found in ambitious applications such comparison to standard sinter modules. as solar and UPS. Product range The SKiM 4/5 modules are available as 6-pack, MLI and TMLI configuration with nominal currents from 200A to 600A. The SKiM 63/93 offers 3-phase inverter topologies at 600V, Key features 1200V and 1700V. The power ranges from 20kW to 180kW with nominal currents of 300A to 900A. Modules in buck and boost configuration for 1200V, 600A complete the portfolio. Driver solutions are available as well as an optimised water cooler for fast and customer friendly evaluation. In addition, -- IGBT power module in 6-pack configuration with 3 separated half bridges – SkiM 63/93 paralleling boards for a simple and powerful half-bridge configuration are also available. -- Available in 600V, 1200V and 1700V and from 200A to 900A -- MLI and TMLI configuration – SKiM4/5 -- In 1200V, 600A also available in buck/boost configuration – SKiM 63/93 -- Solder-free design for highest durability – SKiM 63/93 -- Design without baseplate -- Solder-free mounting of the module and the driver PCB -- Low inductive design thanks to symmetrical layout MotorWind Solar Power Power Utility Urban Transport Drives Energy Energy Quality Supplies VehiclesEquipment 22 SEMIKRON – Modules Further information: www.semikron.com/skim Modules – SEMIKRON 23 LINES SEMIPONT CLASSES ® Compact package with various configurations Compact packages with screw, fast on or lead terminals High insulation voltages Diode, thyristor rectifier, rectifier/brake chopper and AC controller Benefits Applications With blocking voltages up to 1.8k V the SEMIPONT family offers Typical application areas for the broad field of SEMIPONT high ruggedness for harsh industrial applications. The diffe- power bridge rectifiers include AC and DC drives, servo drives, rent housings with soldered PCB connection allow for compact (controlled) field rectifiers for DC motors, (controllable) rectifiers inverter design. for power supplies, input rectifiers for variable frequency drives, soft motor starters, temperature control, (controlled) battery charger rectifiers, DC motor field controllers, DC motor controllers and DC power supplies. Product range The SEMIPONT bridge rectifier family is available in various configurations with diode and thyristor rectifiers, rectifier/brake chopper or AC controller. The compact screw mounted packages enable fast PCB mounting. High blocking voltages of up to 1800V, high ruggedness for hard industrial application, high insulation voltages are also available. Key features -- Diode, thyristor rectifier, rectifier/brake chopper and AC controller -- From 400V up to 1.8kV blocking voltages -- From 28A up to 207A -- Compact packages with screw, fast on or lead terminals Power Quality 24 SEMIKRON – Modules Further information: www.semikron.com/semipont Modules – SEMIKRON 25 LINES SEMIPACK CLASSES ® Comprehensive product range – industrial standard Well established thyristor diode package Market experience over 40 years Broad power and topology range Benefits Applications SEMIPACK was the first insulated module on the market, and The target applications for the thyristor, thyristor/diode more than 40 years later, it is still state-of-the-art. It is a well or diode modules include input rectifiers (single-phase, established industrial standard with regard to footprint and three-phase, uncontrolled, half-controlled or controlled) module outline. Due to the comprehensive product range, for inverters or UPS systems, soft start applications and the optimal solution can be found for any application. control systems. With SemiSel, the free online calculation and simulation tool for losses and temperature, the power electronic system developer is able to make the perfect power module choice. Product range The SEMIPACK product line offers a comprehensive product range with seven module lines: with voltages from 800V to 2200V, insulation voltages of 3.6kV, 4.8kV@1s and a current range from 15A to 1200A. Uncontrolled, half-controlled and controlled rectifier modules are available as well as single thyristor or diode modules. Also, fast diodes come in SEMIPACK modules. Furthermore, different contact technologies – soldered contact, bonded contact or pressure contact modules – are available. Key features -- 800V up to 2200V -- 15A up to 1200A -- Uncontrolled, half-controlled and controlled rectifier -- Single thyristors and diodes MotorPower Power DrivesQuality Supplies 26 SEMIKRON – Modules Further information: www.semikron.com/semipack Modules – SEMIKRON 27 LINES SEMiSTART CLASSES ® Robust thyristor package Double-sided cooling for high load cycle capability Robust pressure contact technology Low thermal resistance Benefits Applications The main advantage of this power module is the high SEMiSTART, the anti-parallel thyristor module is designed current capability in a new compact design. A 400kW with an integrated heatsink for soft-start applications. soft-starter featuring SEMiSTART has just one sixth of the volume of the same device with conventional capsule thyristors. Product range The SEMiSTART thyristor module is offered in five current classes, two voltages classes and three sizes. In addition, due to pressure contact technology and doublesided chip cooling, these new thyristor modules can withstand overload currents of up to 3000A for a 20s duration of overload. Key features -- 500A up to 3000A overload -- Double sided cooling -- Pressure contact Motor Drives 28 SEMIKRON – Modules Further information: www.semikron.com/semistart Modules – SEMIKRON 29 LINES SKiiP CLASSES ® Sintered chips – for high operating temperatures 3-in-1: Driver, semiconductors and cooling 2-3 times higher power cycling capability due to sinter technology Completely assembled and 100% tested – including 1 hour burn-in test Benefits Applications SKiiP4 is the most powerful IPM on the market. SKiiP4 modules The success story of the SKiiP family has progressed hand in enable the production of converter units with outputs of up to hand with the advancement of the wind power market. The 4th 2.1MW. The power semiconductors used in SKiiP4 modules can generation SKiiP modules are a further improvement of be operated at a junction temperature of up to 175°C. To make the powerful SKiiP series. The mainstay of SKiiP4 modules is the sure these components can be reliably used at these tempera- wind power sector, with approximately 57GW out of the 122GW tures, the power circuitry is 100% solder-free. Sinter technology of wind power installed worldwide (at the end of 2009) featuring is used to create a sintered silver layer instead of the solder SEMIKRON solutions, in many cases SKiiP technology. Besides layer which could limit the service life of power modules. wind power applications, SKiiP modules can also be found in Reliability during active and passive thermal cycling is greatly elevators, solar power and railway applications – in fact, in any improved. A further benefit is the better load cycling capability area where powerful, safe and reliable IGBT IPMs are a must. as compared to solder-based modules. The integrated gate driver in the SKiiP4 sets new standards in Product range terms of reliability and functionality. The digital driver guaran- SKiiP4 is available for 1200V and 1700V. In both of these voltage tees safe isolation between the primary and secondary side, classes, SKiiP4 modules come in the topologies 3GB 1800A, both for switching signals and all measurement parameters, 4GB 2400A and – new to the SKiiP family – 6GB 3600A. The wide such as temperature and DC link voltage. This means the user range of accessories is now available for both SKiiP3 and SKiiP4. no longer has to introduce complex and costly circuit compo- Among them the fiber optic boards, the boards for paralleling nents to provide safe isolation. For the first time, the SKiiP drive of SKiiP systems and the adapter board for connection of SKiiP4 features a CANopen diagnosis channel for the integration of to SKiiP3 controller. additional functions. Key features System Production and Test -- DC-Link monitoring (SKiiP3, SKiiP4) -- 100% tested (function, isolation, protection function) -- Current sensors (SKiiP3, SKiiP4) -- Temperature measurement (SKiiP3, SKiiP4) -- CAN diagnostic interface (SKiiP4) -- Burn-In (SKiiP3 on request, SKiiP4 = 100%) -- 100% solder-free (SKiiP4) -- Water, air and customized cooler MotorWind Solar Power Utility Urban Transport DrivesEnergy Energy Quality Vehicles Equipment 30 SEMIKRON – Modules Further information: www.semikron.com/skiip Modules – SEMIKRON 31 LINES SKYPER CLASSES ® SKYPER drives 3 x longer MTBF rate of 5 x 106 hours (29500) with new SEMIKRON ASIC chipset Safe gate control with separate signal transmission 7kV burst durability due to interlayer connection and metal pad ASICs Benefits Applications The high integration of SEMIKRON’s new ASIC chipset provides The new SKYPER 42 LJ offers the benefits of digital signal consis- for safe IGBT gate control over the whole lifecycle. Short circuits tency while maintaining full performance. Ambitious applica- are managed very fast by separate error channels. tions such as medical or large drives up to 300kW are securely SoftOff and over voltage feedback avoid dangerous overvolta- powered. SKYPER 32 is the perfect solution for industrial drives ges. The mixed signal ASICs guarantee lowest tolerances over and process control applications. SKYPER 42 meets the require- the full temperature range. MLI or paralleled IGBT topologies ments of induction heating / welding applications that call are managed by the adjustable error handling. for high currents, durable solar inverters and motor drives bet- With an optimized interface and the adjustable filter setting the ween 300kW and 1.5MW. SKYPER Prime drives Primepack and SKYPER IGBT driver survives external interferences over 100% SEMITRANS 10 modules up to 1700V and 1400A. The new of EN standards. SKYPER 12 PF is the benchmark for motor drives applications based on 17mm press fit modules. Product range The SKYPER drivers are available as IGBT driver cores and plug and play driver. The SKYPER platform can drive 600V, 1200V and 1700V IGBT modules. SKYPER 32 drives with a standard and a PRO version 1W per channel. The PRO version has additional protection features like external failure inputs and SoftOff. The SKYPER 42 has 4W per channel and can drive up to 2500A IGBTs. The SKYPER 42 LJ with 2W per channel closes the gap Key features between SKYPER 32 and 42. With the new ASIC chipset, the fast failure management and the consistent signal conditioning the 42LJ is the latest driver core of SEMIRKON. The latest IGBT drivers are SKYPER Prime and SKYPER 12 PF. Both offer as fully qualified Plug & Play driver maximum performance when using -- Two driver channels for IGBT single and half bridges SEMiX P or SEMITRANS 10 modules. -- For 600V, 1200V and 1700V IGBT modules -- Driving up to 2500A -- Short pulse suppression and EMC cage -- SoftOff and separate error channels -- Adjustable filter and failure management -- Customized adapter boards on request MotorSolar DrivesEnergy 32 SEMIKRON – IGBT Driver Power Urban Transport Quality Equipment Further information: www.semikron.com/skyper IGBD Driver – SEMIKRON 33 LINES SEMISTACK CLASSICS ® CLASSES Standards for LV diode/thyristor rectifiers Off-the-shelf product range Air cooled power assemblies Ready for integration Benefits Applications The SEMISTACK CLASSICS family range has been set up for - Regulated/unregulated power supplies fast integration of an industrial rectifier. Each power bridge - Alternator excitation has been sized to embed semi-conductors with suitable RC - Motor control commutation circuit, proper AC fuses and cooling devices. - Soft starters The high power range of rectifier has been improved using - Soft charge a new heatsink profile, allowing for modularity, fan options, - Industrial heating easy maintenance and weight reduction. Product range The SEMISTACK CLASSICS family range consists of a 137 item list, corresponding to four electrical topologies B6C, B6HK, B6U, W3C. These products are available in natural of forced cooling, with or without fuses. They include RC protection circuit and are ready for cabinet integration, independently from their semiconductor devices technology (isolated or not). Key features -- 4 topologies B6C, B6U, B6HK, W3C -- Maximum continuous DC current from 60A up to 4015ADC -- Rectifier AC voltage up to 500VAC -- DC bus voltage up to 670VDC -- RC, fuses, cooling fans and thermo switches included MotorPower DrivesQuality 34 SEMIKRON – Stacks Urban Transport Equipment Further information: www.semikron.com/semistack-classics Stacks – SEMIKRON 35 LINES SEMISTACK RE ® CLASSES Low voltage optimized converter for wind and solar PV Pre-qualified water cooled IGBT power assemblies IGBT inverter power density up to 11.4kVA/L 2- and 4-quadrant 3-phase converter Long life expectancy Benefits Applications The SEMISTACK RE offers a pre-qualified power assembly ready The SEMISTACK RE complies with wind turbine requirements, for integration following rigorous SEMIKRON qualification and offering the capability to built 4-quadrant converters suitable current environmental standards (IEC 60721-3). with synchronous generator and double fed induction genera- The platform design has been optimized to get the best com- tors, with an optional brake chopper design. The platform promise cost/performance for a water-cooled power inverter in flexibility allows to match requirement of solar PV central inver- the megawatt power range. ters with a DC bus voltage up to 900VDC continuous. The book format enables a compact integration in standard in- Alternatively, SEMISTACK RE can be used in low-voltage appli- dustrial cabinets to achieve high power up to 6MVA low voltage. cations requiring high power and high reliability, such as Specified for wind turbine applications, the SEMISTACK RE 3-phase inverters in a shipyard or in a battery energy storage offers a high IGBT cycling capability and a high capacitor bank unit installed close to renewable energy power plants. lifetime, reducing maintenance. Product range The SEMISTACK RE platform offers a standard inverter size HWD 1500 x 230 x 510 mm to fit two power sub-assemblies into a 600 x 600 x 2000 mm cabinet. The standard size has a current distribution between 1000A and 1400A. For applications with lower current rating or with a stronger constraint on the cabinet size, a smaller inverter size HWD Key features 1250 x 230 x 510 mm offers continuous output current rated from 600A to 900ARMS. The SEMISTACK RE embeds the SKiiP IPM product family -- Maximum continuous output current from 600A up to 1400ARMS -- Switching frequency up to 5kHz -- Inverter output voltage up to 690VAC which integrates the IGBT gate driver and monitoring analogue outputs (temperature, output current and DC bus voltage). As an option, a CAN interface for supervising the SKiiP. To increase power capacity up to 6MVA, SEMISTACK RE can be put in parallel, connected together through the DC bus and controlled all-like-one with a SEMIKRON paralleling board. -- DC bus voltage up to 1250VDC As an option, SEMISTACK RE platform can be offered as an -- DC bus polypropylene capacitor bank lifetime rated at 100,000 hours at 40 °C power filters, electrical and hydraulic distribution. integration into an industrial cabinet with suitable AC and/or DC -- Analogue measurement T, VBUS, IOUT -- CAN interface (configuration and monitoring) -- Brake chopper optional WindSolar EnergyEnergy 36 SEMIKRON – Stacks Further information: www.semikron.com/semistack-re Stacks – SEMIKRON 37 LINES ® CLASSES SEMIKUBE Air cooled IGBT converter family up to 1MVA Air cooled IGBT power assembly Maximum output current from 150A up to 1500A Fits into 300mm cabinets Fully integrated safety management Benefits Extending the SEMIKUBE portfolio, the SEMIKUBE SlimLine 3-phase inverter operates up to 1000VDC bus voltage. platform is a family of pre-qualified power assemblies which Designed in accordance with IEC 62109, the platform is poised follow the same rigorous SEMIKRON qualification and certifi- to obtain UL 1000V recognition. SEMIKUBE SlimLine complies cations. The platform integrates advanced technologies with most AC drives application requirements. The current mea- which maximize performance and power density. surement precision of 1% (at 25°C) allows for premium motor SEMIKUBE SlimLine platform has been designed to fit appli- control required for highly dynamic applications and motion cations in severe environments. Suitable for outdoor cabinets, control systems. the platform can be placed in environments subject to high temperature fluctuations. Extremely slim, the platform can Product range be mounted into 300mm deep cabinets. The SEMIKUBE offers four frame sizes of continuous rated SEMIKUBE, by its modular design and patented DC clamp, current from 150A to 1500A, using SEMITRANS 1200V IGBT enables the construction of various converter topologies. The Trench E4 modules. SEMIKUBE SlimLine design is optimised for platform design facilitates easy arrangement in the cabinet 3-phase inverter topologies. Dedicated rectifier with 3-phase owing to the separation of the main cooling air flow through inverter and optional brake chopper may be added. the heatsink and its IP54 rated mounting flange. The new The IGBTs are controlled by a SEMIKRON embedded driver, which SEMIKUBE 1500V, with its state of the art driver, provides a fast provides error management, and analogue outputs of current, and cost effective alternative to 3 level solutions. DC voltage and heatsink temperature. A CAN interface is available for parameter configuration and diagnostics monitoring. Applications Air cooling for SEMIKUBE SlimLine is provided by highly efficient Following the philosophy of the SEMIKUBE, the SEMIKUBE long life axial fans, realizing maximum power within a compact SlimLine is optimised for solar PV central inverters. Sized for the package. most commonly used central inverter ratings on the market, SEMIKUBE is a more versatile product, allowing converter i.e. 500kW, 670kW up to 900kW, the SEMIKUBE SlimLine construction around a common DC link, including four quadrant converters, multiphase converters and newly developped 1500V Key features -- Power density up to 7.5kVA/L -- Four frame sizes ranging from 75kVA up to 1500kVA inverter for solar central system. -- Operating temperature range: -30°C to +60°C -- Integration into 300mm deep cabinet -- AC output voltage up to 690Vac -- UL1741 1000V ready -- Current measurement accuracy <1% -- 100% tested in production -- THEATSINK, VBUS, IOUT : analogue measurement or CAN monitoring MotorSolar Power DrivesEnergy Supplies 38 SEMIKRON – Stacks Further information: www.semikron.com/semikube Stacks – SEMIKRON 39 LINES SKiiPRACK CLASSES ® Versatile high power inverter platform Pre-qualified water cooled IGBT power assemblies IGBT Inverter power density at 10.4kVA/L Flexible mounting High reliability and long life expectancy Benefits Applications The SKiiPRACK offers a pre-qualified power assembly ready The SKiiPRACK complies with wind turbine requirements, for integration following rigorous SEMIKRON qualification and offering the capability to build 4-quadrant converters suitable current environmental standards (IEC 60721-3). for synchronous generators and double fed induction genera- Based on a “Cell” construction, the SKiiPRACK platform offers tors, with an optional brake chopper design. high flexibility for designing numerous electrical topologies and The platform flexibility allows matching electrical topologies for a convenient integration into standard industrial cabinets. of AC drive applications to power AC induction motors up The SKiiPRACK has been designed for applications reques- to 1MW, in particular for pumps or in shipyards. ting high reliability and a long life time up to 20 years. Totally dismountable, the cell concept eases maintenance phases, reducing the time of handling and application stops. Product range The SKiiPRACK platform consists of a cell HWD 525 x 375 x 470 mm to be assembled with others cells to create a functional unit in standard cabinets 600 mm deep and 2,000mm high. A cell can integrate an H-bridge, a 1-phase leg + brake chopper or 12-pulse rectifier, and combination of them can create 3-phase inverter, 4-quadrant converter or 3-phase rectifier and inverter. Key features The output current range offers scalability from 600A to 1200A continuous. The SKiiPRACK embeds the SKiiP IPM product family which integrates the IGBT gate driver and monitoring analogue out- -- Maximum continuous output current from 600A up to 1200ARMS -- Switching frequency up to 5kHz -- Inverter output voltage up to 690VAC -- DC bus voltage up to 1100 VDC -- DC bus polypropylene capacitor bank lifetime rated at 100,000 hours at 40 °C puts (temperature, output current and DC bus voltage). As an option, a CAN interface for supervising the SKiiP. To increase power capacity up to 5MVA, SKiiPRACK can be put in parallel, connected in a very flexible way (horizontal or vertical) together through the DC bus and controlled all-like-one with a SEMIKRON paralleling board. As an option, SKiiPRACK platform can be offered with integration in an industrial cabinet with suitable AC and/or DC power filters, electrical and hydraulic distribution. -- Analogue measurement T, VBUS, IOUT -- As possible options: -- Brake chopper, additional capacitor bank, DC bus electrolytic capacitor bank, diode/thyristor rectifier cells MotorWind DrivesEnergy 40 SEMIKRON – Stacks Further information: www.semikron.com/skiiprack Stacks – SEMIKRON 41 LINES SKAI 2 CLASSES ® Most compact power electronic system „off-the-shelf“ for electro-mobility Suitable for battery voltages 24V up to 800V Sintered power semiconductors EMI compliant “off-the-shelf” variants with gate driver interface, vector control software, automotive power connections Benefits Applications The SKAI power electronic platform – now in its 2nd genera- The SKAI 2 ”Off-the-Shelf“ power electronic building block tion – comprises highly integrated motor controller which pro- family has been introduced to cover a broad range of vehicle vide the ideal powertrain solution for mobile electric and hybrid electrification applications. Examples are electric drivetrains applications. Power densities of up to 20 kVA / liter provide a with standardized motor/generator flanges to fit or retrofit the notable size reduction compared with other available standard drives easily into existing vehicle designs. These types of motor controller products. The systems are designed to ope- drivetrains have been developed for many vehicle types , i.e. rate with supply voltages of 24V up to 800V and with output buses, light trucks, agriculture and construction machinery power ratings of up to 250 kVA. as well as marine applications or cars. The IGBT-based SKAI 2 HV motor controller operates on sintered 100% solder-free 600V or 1200V power semiconductors Product range and it features polypropylene film DC-link capacitors. The MOS- There are versatile SKAI 2 HV ”Off-the-Shelf“ variants available. based SKAI 2 LV motor controller uses the established SkiiP The SKAI 2 LV is available as single or dual motor controller for technology with a very low-inductive connection to the DC-link supply voltages between 24V and 115V. Cooling methods are capacitors, driver electronics, latest generation DSP controller, liquid, forced air cooling or base plate. There are different optio- current, voltage and temperature sensors. It is integrated in a nal services available like end-of-line flashing of customer spe- waterproof IP67 enclosure. The compact motor controller with- cific software, lifetime estimation based on application profile stand high vibration amplitudes up to 10g rms. QUASAR motor analysis, field application support, individual parameterization control software functionally complements the system and of motor control software and further services on request. completes this tried-and-tested package. SEMIKRON provides engineering services to support customers in the integration of the SKAI 2 motor controller systems. Available services include, for instance, lifetime estimation, field application support, individual parameterization of motor control software etc. Key features -- Compact integration in IP 67 enclosure -- EMI filters -- Voltage, current and temperature sensors -- Gate driver with protection -- Versatile cooling system (liquid cooled, forced air cooled, base plate) -- IGBT/ MOSFET power semiconductors -- DC link capacitors -- Fully programmable digital signal processor -- Motor control software UtilityUrban Transport VehiclesEquipment 42 SEMIKRON – Systems Further information: www.semikron.com/skai Systems – SEMIKRON 43 LINES CLASSES Discrete Diodes / Discrete Thyristors / Rectifier Bridges Discrete devices – robust and easy to use Discrete diodes and thyristors for low to high power applications Rectifier bridges for low to medium power applications Available in voltage classes from 200V to 5000V Current ratings from 1A to 6000A Wide range of case designs Discrete benefits Discrete applications Discrete components are used in a wide variety of applica- Key uses include welding machines, battery chargers, tions. Particular benefits are achieved whenever high current, electroplating, soft starters, DC motor control, AC controllers uncommon topologies, natural cooling or resistance to harsh (e.g. for temperature control), alternators and several others. conditions are required. With sealed cases, discrete devices are convenient for both The SEMIKRON portfolio includes axial leaded diodes up to 6A, natural convection and forced cooling allowing wider application diodes and thyristors in screw fit (stud) and capsule housings fields. With over 50 years of field experience and millions of which range from 6000A and 5000V for diodes, to 1200A and units produced every year, the SEMIKRON portfolio enables 1800V for thyristors. competitive, flexible and highly reliable options. - Easy assembly Avalanche diodes - Hermetic sealing - No over-voltage suppressors are needed - Rugged construction - Insensitive to short term reverse overloads - High blocking voltages possible without static Rectifier bridge benefits or dynamic voltage sharing circuits When performance, space and fast production are paramount, SEMIKRON rectifier bridges are the solution in many applica- Rectifier bridge applications tions. Single or 3-phase topologies using diodes, thyristors and Key applications include battery chargers, motor drive input IGBTs in isolated compact cases can be realised. Whether rectifiers, power supplies, DC motor control, rectifiers with PFC, your preference is connection by solder, solderless through AC controllers, static switches (SKWT types) for natural spring or press-fit contacts, mechanically with screws, fast-on convection or forced cooling. or busbars, SEMIKRON has a product. - Flexible designs achievable - Customised terminations possible Key features -- Recommended for forced air and water cooling -- Axial diodes for PCB mounting -- Compact case with high current capability -- Standard and fast types -- Stud and disc types: forward drop selections available for easy paralleling MotorSolar DrivesEnergy 44 SEMIKRON – Discretes Power Supplies Further information: www.semikron.com/discretes Discretes – SEMIKRON 45 LINES CLASSES Product Classes 1 IGBT Modules 42 2 Silicon Carbide Modules, Full SiC, Hybrid SiC 74 3 MOSFET Modules 82 4 Thyristor / Diode Modules 88 5 Bridge Rectifier Modules 102 6 Intelligent Power Module – IPM 118 7 IGBT Driver 130 8 Stacks 134 9 Systems 144 10 Discretes, Chips, Discrete Diodes, Discrete Thyristors 152 11 Accessories, Heatsinks, Fans, Thermal Paste 164 1 2 3 4 5 6 7 8 9 10 11 46 SEMIKRON SEMIKRON 47 MiniSKiiP ® SEMIKRON offers IGBT (insulated-gate bipolar transistor) modules in SEMITRANS, SEMiX, SKiM, MiniSKiiP and SEMITOP packages in different topologies, current and voltage ratings. Starting from 4A to 1400A in voltage classes from 600V to 1700V. 1 LINES IGBT Modules CLASSES IGBT Modules for Maximum Performance 600V up to 1700V 6-pack 3-level 1 H-bridge CIB The IGBT modules are used in a variety of applications offering key technologies like sintering, spring or pressfit contacts for easy and fast assembly. half bridge twin 6-pack SEMITOP Different topologies like CIB (converter inverter brake), halfbridge, H-bridge, 6-pack and 3-level are available in order to cover almost all application fields. ICnom in A ® 0 20 40 60 80 100 300 400 600 900 1400 2 600V up to 1200V half bridge 6-pack 3-level The latest IGBT chip and diode technologies offer optimized switching performance up to Tj max= 175°C. 3 chopper H-bridge CIB ICnom in A SEMiX ® 0 20 40 60 80 100 300 400 600 900 1400 4 600V up to 1700V half bridge ProductPage 6-pack MiniSKiiP50 3-level SEMITOP55 chopper SEMiX 62 SEMITRANS 70 SKiM 4/5 80 SKiM 63/93 82 5 buck-boost converter ICnom in A SEMITRANS ® 0 20 40 60 80 100 300 400 600 900 1400 600V up to 1700V 6 half bridge 6-pack chopper single switch SKiM 4/5 ® ICnom in A 0 20 40 60 80 100 300 400 600 900 1400 7 600V up to 1700V 6-pack 3-level 8 ICnom in A SKiM ® 63/93 0 20 40 60 80 100 300 400 600 900 1400 600V up to 1700V 9 6-pack chopper ICnom in A 0 20 40 60 80 100 300 600 900 1400 10 For detailed information please refer to data sheets. Further information: www.semikron.com/igbt-modules 48 SEMIKRON 11 SEMIKRON 49 Circuit 600V - IGBT3 (Trench) LINES Rth( j-s) K/W IFSM @ Tj = 25°C A Rth( j-s) K/W Err mJ VF @ Tj = 25°C typ. V IF@ TS = 25°C Rth( j-s) A Rth( j-s) IFSM @ Tj = 25°C K/W Eoff Rth( j-s) mJ CLASSES Module Eon Err mJ Rectifier VCE(sat) @ Tj = 25°C typ. VF @ Tj = 25°C typ. V Diode ICnom IF@ TS = 25°C A IGBT IC @ TS= 25°C Rth( j-s) A Type Case Eoff Module Eon Rectifier VCE(sat) @ Tj = 25°C typ. 1 Diode ICnom IGBT IC @ TS= 25°C Type IGBT Modules / MiniSKiiP A A V mJ mJ K/W A V mJ K/W A K/W 11 Case IGBT Modules / MiniSKiiP Circuit 650V - IGBT3 (Trench) SKiiP 16GH066V1 65 50 1.45 1.7 1.7 0.95 56 1.50 1.3 1.6 - - II 1 SKiiP 24GB07E3V1 2) 185 150 1.45 2.2 5.1 0.33 161 1.54 3.7 0.45 - - II 2 SKiiP 27GH066V1 88 75 1.45 2.7 3 0.75 77 1.50 1.8 1.2 - - II 2 SKiiP 26GB07E3V1 2) 229 200 1.45 4.4 7.4 0.28 235 1.40 4.5 0.35 - - II 2 SKiiP 28GH066V1 112 100 1.45 3.4 3.5 0.6 112 1.30 3.3 0.8 - - II 2 SKiiP 38GB07E3V1 2) 287 300 1.45 5.5 10.6 0.25 310 1.40 5.1 0.28 - - II 3 SKiiP 01NAC066V3 12 6 1.45 0.3 0.2 2.4 12 1.30 0.2 3 220 1.5 II 0 SKiiP 02NAC066V3 20 10 1.45 0.5 0.3 2 20 1.30 0.5 2.5 220 1.5 II 0 SKiiP 01NEC066V3 12 6 1.45 0.3 0.2 2.4 12 1.30 0.2 3 220 1.5 II 0 SKiiP 02NEC066V3 20 10 1.45 0.5 0.3 2 20 1.30 0.5 2.5 220 1.5 II 0 SKiiP 03NEC066V3 27 15 1.45 0.6 0.5 1.8 28 1.40 0.5 2.5 220 1.5 II 0 SKiiP 11NAB066V1 12 6 1.45 0.3 0.2 2.4 12 1.30 0.2 3 220 1.5 II 1 SKiiP 12NAB066V1 20 10 1.45 0.5 0.3 2 20 1.30 0.5 2.5 220 1.5 II 1 SKiiP 13NAB066V1 27 15 1.45 0.6 0.5 1.8 28 1.40 0.5 2.5 220 1.5 II 1 SKiiP 14NAB066V1 33 20 1.45 0.75 0.7 1.6 31 1.60 0.55 2.5 220 1.5 II 1 SKiiP 25NAB066V1 43 30 1.45 0.9 1.2 1.35 39 1.50 1.1 2.1 370 1.5 II 2 SKiiP 26NAB066V1 65 50 1.45 1.6 1.6 0.95 56 1.50 1.3 1.6 370 1.5 II 2 SKiiP 37NAB066V1 88 75 1.45 2.7 3 0.75 77 1.50 1.8 1.2 700 0.9 II 3 SKiiP 38NAB066V1 112 100 1.45 3.4 3.5 0.6 112 1.30 3.3 0.8 700 0.9 II 3 SKiiP 02NEB066V3 20 10 1.45 0.5 0.3 2 20 1.30 0.5 2.46 220 1.5 II 0 SKiiP 03NEB066V3 27 15 1.45 0.6 0.5 1.8 28 1.40 0.5 2.5 220 1.5 II 0 SKiiP 25NEB066V1 43 30 1.45 0.9 1.2 1.35 39 1.50 1.1 2.1 370 1.5 II 2 2 3 1200V - IGBT3 (Trench) SKiiP 11AC126V1 3) 16 8 1.70 0.9 1 1.5 14 1.90 0.9 2.5 - - II 1 SKiiP 12AC126V1 3) 28 15 1.70 1.7 1.9 1.15 26 1.60 1.2 1.95 - - II 1 SKiiP 13AC126V1 3) 41 25 1.70 4.1 3.1 0.9 30 1.80 2.2 1.7 - - II 1 4 SKiiP 23AC126V1 3) 41 25 1.70 3.7 3.1 0.9 30 1.80 2.6 1.7 - - II 2 SKiiP 24AC126V1 3) 52 35 1.70 4.2 4.4 0.75 38 1.80 3.5 1.5 - - II 2 SKiiP 25AC126V1 3) 73 50 1.70 5.8 6.5 0.55 62 1.60 5.1 1 - - II 2 SKiiP 26AC126V1 3) 88 70 1.70 9 7.7 0.5 91 1.50 7.5 0.7 - - II 2 SKiiP 37AC126V2 97 75 1.70 9.6 8.7 0.45 90 1.60 9.6 0.7 - - II 3 SKiiP 38AC126V2 3) 118 105 1.70 13.1 13 0.4 118 1.60 11.2 0.55 - - II 3 SKiiP 39AC126V2 3) 157 140 1.70 19.9 17.2 0.3 167 1.50 16.2 0.4 - - II 3 SKiiP 11NAB126V1 3) 16 8 1.70 0.8 1 1.5 14 1.90 0.9 2.5 220 1.5 II 1 SKiiP 12NAB126V1 3) 28 15 1.70 2 1.9 1.15 26 1.60 1.3 1.95 220 1.5 II 1 SKiiP 23NAB126V1 3) 41 25 1.70 3.5 3 0.9 30 1.80 2.5 1.7 370 1.25 II 2 SKiiP 23NAB126V10 3) 41 25 1.70 3.5 3 0.9 30 1.80 2.5 1.7 635 0.9 II 2 SKiiP 24NAB126V1 3) 52 35 1.70 4.6 4 0.75 38 1.80 3.3 1.5 370 1.25 II 2 SKiiP 24NAB126V10 3) 52 35 1.70 4.6 4 0.75 38 1.80 3.3 1.5 635 0.9 II 2 SKiiP 35NAB126V1 3) 73 50 1.70 6.5 6.1 0.55 62 1.60 4.7 1 700 0.9 II 3 SKiiP 36NAB126V1 3) 88 70 1.70 9 7.7 0.5 91 1.50 7.5 0.7 700 0.9 II 3 3) 5 6 7 8 1200V - IGBT4 (Trench) 600V - NPT IGBT (Standard) SKiiP 11NAB065V1 3) 12 6 2.00 0.3 0.2 1.9 12 1.30 0.2 2.5 220 1.5 II 1 12NAB065V1 3) 20 10 2.00 0.3 0.3 1.5 20 1.40 0.2 2.5 220 1.5 II 1 SKiiP 13NAB065V1 3) 24 15 2.00 0.6 0.3 1.4 26 1.40 0.4 2.2 220 1.5 II 1 SKiiP 14NAB065V1 3) 29 20 2.00 0.7 0.4 1.25 26 1.60 0.4 2.2 370 1.25 II 1 SKiiP 26MLI07E3V1 2) 98 75 1.45 2.8 2.8 0.6 75 1.54 1.4 1 - - II 2 SKiiP 27MLI07E3V1 2) 110 100 1.45 4.2 4.2 0.6 107 1.40 3.5 0.8 - - II 2 SKiiP 28MLI07E3V1 2) 135 150 1.45 5.5 5.6 0.55 126 1.40 5.5 0.75 - - II 2 SKiiP 39MLI07E3V1 2) 159 200 1.45 3.6 8.9 0.5 163 1.39 8.3 0.6 - - II 3 SKiiP 650V - IGBT3 (Trench) Footnotes: 1) Sample status / 2) In production new / 3) Not for new designs SKiiP24GB12T4V1 2) 170 150 1.85 10.8 15.6 0.32 157 2.17 10.3 0.41 - - II 2 SKiiP26GB12T4V1 2) 224 200 1.80 13.6 22.1 0.25 194 2.20 13.4 0.34 - - II 2 SKiiP38GB12E4V1 2) 329 300 1.85 19.1 34.6 0.17 267 2.20 21.5 0.26 - - II 3 SKiiP39GB12E4V1 1) 388 400 1.80 24 48.5 0.16 330 2.20 28.9 0.22 - - II 3 SKiiP 26GH12T4V11 90 70 1.85 9.5 7.1 0.55 83 2.17 5.6 0.75 - - II 2 9 10 Footnotes: 1) Sample status / 2) In production new / 3) Not for new designs 11 50 SEMIKRON SEMIKRON 51 LINES A A V mJ mJ K/W A V mJ K/W A K/W 167 150 1.85 22.5 14 0.33 136 2.14 11.4 0.52 - - II 3 40 2.05 - - 0.75 44 2.30 - 1.2 - - II 3 Circuit 1200V - IGBT4 (Trench) CLASSES 1 Case K/W Rth( j-s) A IFSM @ Tj = 25°C K/W Rth( j-s) mJ Err V VF @ Tj = 25°C typ. Rth( j-s) A IF@ TS = 25°C IFSM @ Tj = 25°C K/W Rth( j-s) Rth( j-s) mJ Module Eoff Err mJ Rectifier Eon VF @ Tj = 25°C typ. V Diode VCE(sat) @ Tj = 25°C typ. IF@ TS = 25°C A IGBT ICnom Rth( j-s) A Type Case Eoff Module Eon Rectifier VCE(sat) @ Tj = 25°C typ. 1 Diode ICnom IGBT IC @ TS= 25°C Type IGBT Modules / MiniSKiiP IC @ TS= 25°C IGBT Modules / MiniSKiiP Circuit 1200V - IGBT4 (Trench) SKiiP 11AC12T4V1 12 8 1.85 0.87 0.75 1.84 15 2.33 0.53 2.53 - - II 1 SKiiP 12AC12T4V1 18 15 1.85 1.65 1.5 1.3 23 2.38 0.79 1.92 - - II 1 SKiiP 13AC12T4V1 41 25 1.85 3.7 2.4 1 32 2.41 1.64 1.52 - - II 1 SKiiP 23AC12T4V1 41 25 1.85 3.7 2.4 1 32 2.41 1.64 1.52 - - II 2 SKiiP 24AC12T4V1 52 35 1.85 3.7 3 0.85 44 2.30 2.3 1.2 - - II 2 SKiiP 25AC12T4V1 69 50 1.85 6 4.5 0.71 60 2.22 3.2 0.95 - - II 2 SKiiP 26AC12T4V1 90 70 1.85 9.5 7.1 0.55 83 2.17 5.6 0.75 - - II 2 SKiiP 37AC12T4V1 90 75 1.85 11.5 6.8 0.58 83 2.17 5.5 0.75 - - II 3 SKiiP 38AC12T4V1 115 100 1.80 13.7 9.7 0.48 100 2.20 6.5 0.66 - - II 3 SKiiP 39AC12T4V1 167 150 1.85 22.5 14 0.33 136 2.14 11.4 0.52 - - II 3 SKiiP 02NAC12T4V1 6 4 1.85 0.66 0.37 2.49 7.5 1.82 0.34 2.53 220 1.5 II 0 SKiiP 03NAC12T4V1 7.5 8 1.85 0.9 0.7 1.84 9 2.33 0.5 2.53 220 1.5 II 0 SKiiP 10NAB12T4V1 6 4 1.85 0.66 0.37 2.49 7.5 1.82 0.34 2.53 220 1.5 II 1 SKiiP 11NAB12T4V1 12 8 1.85 0.87 0.74 1.84 15 2.33 0.57 2.53 220 1.5 II 1 SKiiP 12NAB12T4V1 28 15 1.85 1.4 1.3 1.3 23 2.40 1.1 1.92 220 1.5 II 1 SKiiP 23NAB12T4V1 37 25 1.85 2.65 2.3 1.2 32 2.40 1.6 1.52 370 1.25 II 2 SKiiP 23NAB12T4V10 37 25 1.85 2.65 2.3 1.2 30 2.41 1.6 1.52 700 0.9 II 2 SKiiP 24NAB12T4V1 48 35 1.85 4.3 3.25 1 44 2.30 2.4 1.2 370 1.25 II 2 SKiiP 24NAB12T4V10 48 35 1.85 4.3 3.25 1 44 2.30 2.4 1.2 700 0.9 II 2 SKiiP 34NAB12T4V1 52 35 1.85 4.3 3.3 0.85 44 2.30 2.4 1.2 370 1.25 II 3 SKiiP 34NAB12T4V10 1) 52 35 1.85 4.3 3.3 0.85 44 2.30 2.4 1.2 700 0.9 II 3 SKiiP 35NAB12T4V1 69 50 1.85 6 4.7 0.71 60 2.25 3.4 0.95 700 0.9 II 3 SKiiP 37NAB12T4V1 90 75 1.85 9.7 6.8 0.58 83 2.17 4.9 0.75 700 0.9 II 3 SKiiP 39GA12T4V1 2) 2 1200V - IGBT4 (Fast Trench) SKiiP 35TMLI12F4V2 1) 3 54 SKiiP 28TMLI12F4V1 2) 93 80 2.05 3.4 2.2 0.49 76 2.17 1.7 0.86 - - II 2 SKiiP 29TMLI12F4V1 1) 153 150 2.05 - - 0.33 148 2.17 - 0.45 - - II 2 - 100 2.00 23.8 32.2 - - 1.76 26.2 - - - II 3 SKiiP 24NAB176V1 2) 38 29 2.00 5.1 6.3 0.91 48 2.00 4.9 1.14 370 1.32 II 2 SKiiP 34NAB176V3 2) 67 58 2.00 11.2 12.8 0.57 66 2.06 6.6 0.84 635 0.86 II 3 4 1700V - IGBT3 (Trench) SKiiP 37NAB12T4V10 90 75 1.85 9.7 6.8 0.58 83 2.17 4.9 0.75 850 0.85 II 3 SKiiP 38NAB12T4V1 115 100 1.80 11.2 10 0.48 99 2.20 6.5 0.66 1000 0.7 II 3 1.3 23 2.38 0.8 1.92 60 2.5 II 1 SKiiP 12ACC12T4V10 2) 28 15 1.85 2.1 1.6 SKiiP 23ACC12T4V10 2) 41 25 1.85 3.5 2.7 1 32 2.41 1.15 1.52 65 1.92 II 2 SKiiP 24ACC12T4V10 2) 52 35 1.85 3.9 3.5 0.85 44 2.30 2.3 1.2 100 1.52 II 2 SKiiP 39TMLI12T4V2 2) 235 200 1.80 7.5 12.8 0.23 194 2.20 9.7 0.34 - - II 3 SKiiP 38AC176V2 2) 5 6 7 1700V - IGBT4 (Trench) SKiiP 22GB17E4V1 2) 117 100 1.90 22.2 30.7 0.43 91 2.00 20.9 0.7 - - II 2 SKiiP 24GB17E4V1 2) 177 150 1.90 26 46 0.28 149 2.00 32.4 0.41 - - II 2 SKiiP 36GB17E4V1 2) 224 200 1.90 37 66 0.23 193 2.00 47 0.32 - - II 3 SKiiP 38GB17E4V1 2) 341 300 1.90 47 102 0.15 267 2.00 69 0.24 - - II 3 8 Footnotes: 1) Sample status / 2) In production new / 3) Not for new designs SKiiP 39MLI12T4V1 1) 167 150 1.85 11.1 16.9 0.33 134 2.14 10.9 0.53 - - 9 II 3 10 Footnotes: 1) Sample status / 2) In production new / 3) Not for new designs 11 52 SEMIKRON SEMIKRON 53 Eon Eoff V mJ mJ LINES K/W A V mJ K/W K/W A CLASSES 1 Case VCE(sat) @ Tj = 25°C typ. A IFSM @ Tj = 25°C ICnom A Module Rth( j-s) IC @ TS= 25°C 1 Rectifier Rth( j-s) Diode Err IGBT VF @ Tj = 25°C typ. Type MiniSKiiP II 0 IF@ TS = 25°C Cases IGBT Modules / SEMITOP Rth( j-s) IGBT Modules / MiniSKiiP Topology Picture 600V - IGBT3 (Trench) SK 75 GB 066 T 2) 77 75 1.45 3.1 2.8 0.94 62 1.35 0.85 1.55 - - 3 SK 100 GB 066 T 2) 96 100 1.45 7 6 0.78 108 1.35 1.7 0.91 - - 3 SK 150 GB 066 T 2) 124 150 1.45 6.25 5.7 0.55 135 1.35 1.7 0.73 - - 3 2 MiniSKiiP II 1 SK 30 GBB 066 T 2) 40 30 1.45 0.97 1.77 1.65 36 1.45 0.26 2.1 - - 3 SK 50 GBB 066 T 2) 60 50 1.45 2.2 1.73 1.11 56 1.50 0.72 1.7 - - 3 SK 75 GBB 066 T 2) 77 75 1.45 3.1 2.8 0.94 77 1.35 0.85 1.55 - - 3 3 4 MiniSKiiP II 2 MiniSKiiP II 3 SK 20 MLI 066 30 20 1.45 0.4 1.07 1.95 30 1.60 0.2 2.46 - - SK 30 MLI 066 40 30 1.45 0.97 1.77 1.65 37 1.50 0.26 2.3 - - 3 SK 30 MLI 066p 1) 37 30 1.45 0.97 1.77 1.65 34 1.50 0.26 2.3 - - 3p SK 50 MLI 066 60 50 1.45 1.46 2.02 1.11 56 1.50 1.07 1.7 - - 3 SK 75 MLI 066 T 83 75 1.45 1.7 2.8 0.75 92 1.50 1.1 1.2 - - 4 SK 100 MLI 066 T 105 100 1.45 2.5 4.2 0.65 110 1.35 1.9 0.9 - - 4 SK 150 MLI 066 T 151 150 1.45 2.7 5.9 0.55 115 1.50 2.6 0.72 - - 4 SK 75 GD 066 T 83 75 1.45 3.1 2.8 0.75 92 1.35 0.85 1.2 - - 4 SK 100 GD 066 T 105 100 1.45 7 6 0.65 99 1.30 1.7 0.8 - - 4 SK 150 GD 066 T 151 150 1.45 6.25 5.7 0.55 198 1.30 1.7 0.54 - - 4 SK 200 GD 066 T 174 200 1.45 13.9 12 0.45 99 1.30 3.4 0.8 - - 4 3 SK 20 GD 066 ET 2) 30 20 1.45 0.34 0.63 1.95 31 1.45 0.2 2.46 - - 3 SK 30 GD 066 ET 2) 40 30 1.45 0.97 1.77 1.65 36 1.45 0.26 2.1 - - 3 SK 50 GD 066 ET 2) 60 50 1.45 2.2 1.73 1.11 56 1.50 0.72 1.7 - - 3 SK 20 DGDL 066 ET 2) 30 20 1.45 0.3 0.6 1.95 27 1.40 0.2 2.46 2.15 220 3 SK 30 DGDL 066 ET 40 30 1.45 0.55 1.15 1.65 36 1.50 0.53 2.3 1.7 370 3 SK 50 DGDL 066 T 69 50 1.45 2.2 1.74 0.95 54 1.35 0.73 1.6 1.5 370 4 SK 75 DGDL 066 T 81 75 1.45 3.1 2.8 0.75 64 1.35 0.9 1.2 0.9 700 4 SK 100 DGDL 066 T 106 100 1.45 4.4 3.5 0.65 99 1.10 1.45 0.8 0.9 700 4 5 6 7 8 9 600V - NPT IGBT (Standard) SK 45 GAL 063 45 50 2.10 1.4 1.2 1 57 1.45 0.25 1.2 - - 2 10 Dimensions in mm Footnotes: 1) Sample status / 2) In production new / 3) Not for new designs 11 54 SEMIKRON SEMIKRON 55 45 50 2.10 1.4 1.2 1 57 1.45 0.25 1.2 - - 2 SK 80 GM 063 81 100 2.00 3 2.3 0.6 105 1.30 0.2 1.2 - - 2 LINES A A V mJ mJ K/W A V mJ K/W K/W A SK 50 GH 065 F 2) 54 60 2.00 1.07 1.76 0.85 82 1.10 0.42 1.1 - - 3 SK 9 DGD 065 ET 12 6 2.00 0.22 0.12 2.6 20 1.35 0.31 2.7 2.15 220 3 SK 20 DGD 065 ET 26 20 2.00 0.66 0.4 1.7 25 1.60 - 1.7 1.7 370 3 SK 35 GD 065 ET 45 50 2.00 1.3 0.6 1 36 1.90 0.9 1.7 - - 3 Topology Picture 600V - NPT IGBT (Standard) 1 Case SK 45 GAR 063 IFSM @ Tj = 25°C A Rth( j-s) K/W Rth( j-s) K/W Err mJ VF @ Tj = 25°C typ. V IF@ TS = 25°C IFSM @ Tj = 25°C A Rth( j-s) Rth( j-s) K/W Eoff Rth( j-s) mJ Module Eon Err mJ Rectifier VCE(sat) @ Tj = 25°C typ. VF @ Tj = 25°C typ. V Diode ICnom IF@ TS = 25°C A IGBT IC @ TS= 25°C Rth( j-s) A 1 Type Case Eoff Module Eon Rectifier VCE(sat) @ Tj = 25°C typ. Diode ICnom IGBT IC @ TS= 25°C Type IGBT Modules / SEMITOP CLASSES IGBT Modules / SEMITOP Topology Picture 600V - NPT IGBT (Ultrafast) SK 45 GB 063 45 50 2.10 1.4 1.2 1 57 1.45 0.25 1.2 - - 2 SK 80 GB 063 81 100 2.10 4 3 0.6 79 1.40 1.2 0.9 - - 3 2 3 4 SK 15 GH 063 20 15 2.00 0.71 0.4 1.9 20 1.45 0.45 1.2 - - 2 SK 25 GH 063 30 30 2.10 1.1 0.8 1.4 36 1.45 0.25 1.7 - - 2 SK 45 GH 063 45 50 2.10 1.4 1.2 1 57 1.30 0.9 1.2 - - 3 5 SK 13 GD 063 18 10 2.10 0.6 0.4 2 22 1.45 0.1 2.3 - - 3 SK 25 GD 063 30 30 2.10 1.3 0.9 1.4 36 1.45 0.25 1.7 - - 3 SK 45 GD 063 45 50 2.10 1.4 1.2 1 36 1.45 0.25 1.7 - - 3 SK 50 GAR 065 3) 17 6 2.00 0.18 0.13 2 22 1.30 0.18 2.3 2.7 220 3 SK 9 BGD 065 ET 12 6 2.00 0.22 0.12 2.6 20 1.35 0.31 2.7 2.15 220 3 SK 10 DGDL 065 ET 17 6 2.00 0.18 0.13 2 22 1.30 0.18 2.3 2.7 220 3 SK 20 DGDL 065 ET 24 20 2.00 0.69 0.39 1.7 25 1.60 - 1.7 2 220 3 6 650V - IGBT4 (Fast Trench) 600V - NPT IGBT (Ultrafast) SK 50 GAL 065 3) SK 10 BGD 065 ET 54 54 60 60 2.00 2.00 1.1 1.1 0.7 0.7 0.85 0.85 57 57 1.30 1.30 0.2 0.2 1.2 1.2 - - - - 2 SK100MLI07F3TD1p 1) 92 100 1.85 2 3.36 0.65 118 1.37 1.9 0.72 - - 4p SK150MLI07F3TD1p 1) 119 150 1.85 3 5.04 0.55 118 1.37 1.9 0.72 - - 4p SK50MLI07F3D1p 1) 51 50 1.85 1 1.18 1.11 56 1.37 0.95 1.55 - - 3p SK100GD07F3TD1 2) 104 100 1.85 3.92 2.1 0.54 95 1.35 0.92 0.85 - - 4 7 2 SK 55 GARL 065 E 54 60 1.70 1.1 0.76 0.85 36 1.45 0.9 1.7 - - 3 SK 75 GARL 065 E 80 90 1.70 2.71 2.75 0.6 57 1.30 0.2 1.2 - - 3 8 9 1200V - IGBT3 (Trench) SK 50 GB 065 54 60 2.00 1.1 0.7 0.85 64 1.45 0.55 1.1 - - 2 SK 50 GARL 065 F 2) 54 60 1.70 1.03 0.8 0.85 82 1.70 - 2.3 - - 2 SK 50 GARL 065 USA 3) 54 60 1.70 1.07 0.76 0.85 64 1.40 - 2.3 - - 2 SK 50 GD 126 T 68 50 1.70 4.6 6.3 0.6 62 1.35 3.6 1 - - 4 SK 75 GD 126 T 88 75 1.70 11.3 10 0.5 91 1.46 6 0.7 - - 4 SK 100 GD 126 T 114 100 1.70 9.8 11.7 0.4 118 1.50 7.3 0.55 - - 4 10 Footnotes: 1) Sample status / 2) In production new / 3) Not for new designs Footnotes: 1) Sample status / 2) In production new / 3) Not for new designs 56 SEMIKRON 11 SEMIKRON 57 LINES A V mJ mJ K/W A V mJ K/W K/W A SK 25 GH 12T4 2) 35 25 1.85 2.27 2.7 1.31 28 2.41 1.28 1.91 - - 3 SK 50 GD 12T4 T 2) 75 50 1.85 8.3 5 0.65 60 2.20 2.15 0.97 - - 4 SK 50 GD 12T4 Tp 1) 75 50 1.85 8.3 5 0.65 60 2.22 2.15 0.97 - - 4p SK 75 GD 12T4 T 2) 102 75 1.85 13.6 8.2 0.51 83 2.20 3.38 0.75 - - 4 SK 75 GD 12T4 Tp 1) 99 75 1.85 13.6 8.2 0.51 83 2.17 3.38 0.75 - - 4p SK 100 GD 12T4 T 2) 126 100 1.85 16.6 10 0.43 102 2.25 5.2 0.62 - - 4 SK 10 GD 12T4 ET 2) 17 8 1.85 0.41 0.76 2.2 15 2.38 0.41 2.7 - - 3 SK 15 GD 12T4 ET 2) 27 15 1.85 0.83 1.52 1.65 21 2.38 0.82 2.34 - - 3 SK 25 GD 12T4 ET 2) 37 25 1.85 2.27 2.7 1.31 30 2.40 1.28 1.91 - - 3 SK 25 GD 12T4 ETp 1) 37 25 1.85 2.27 2.7 1.31 28 2.41 1.28 1.91 - - 3p SK 35 GD 12T4 ET 2) 44 35 1.85 3.27 3.3 1.21 40 2.30 1.46 1.55 - - 3 SK 10 DGDL 12T4 ET 2) 17 8 1.85 0.41 0.75 2.2 15 2.38 0.41 2.7 2 220 3 SK 15 DGDL 12T4 ET 2) 27 15 1.85 0.82 1.52 1.65 21 2.38 0.82 2.34 2 220 3 Case 11 Topology Picture 1200V - IGBT4 (Trench) SK 10 GD 126 ET 15 8 1.70 1 1 2 25 1.90 1.4 2.1 - - 3 SK 15 GD 126 ET 22 15 1.70 2 1.8 1.6 25 1.60 1.4 2.1 - - 3 SK 25 GD 126 ET 32 25 1.70 3.3 3.1 1.2 28 1.80 2.1 1.9 - - 3 SK 35 GD 126 ET 40 35 1.70 4.6 4.3 1.05 34 1.80 2.9 1.7 - - 3 SK 10 DGDL 126 ET 15 8 1.70 1 1 2 25 1.90 1.4 2.1 2.7 220 3 SK 15 DGDL 126 ET 22 15 1.70 2 1.8 1.6 25 1.60 1.1 2.1 2 220 3 SK 25 DGDL 126 T 41 25 1.70 2.8 3.1 0.9 30 1.50 2 1.7 1.5 370 4 SK 35 DGDL 126 T 52 35 1.70 3.7 4.8 0.75 38 1.50 3 1.5 1.25 370 4 SK 50 DGDL 126 T 68 50 1.70 4.6 6.3 0.6 62 1.35 3.6 1 0.9 700 4 1200V - IGBT4 (Trench) SK 35 GAR 12T4 1) A Topology Picture 1200V - IGBT3 (Trench) SK 35 GAL 12T4 IFSM @ Tj = 25°C A Rth( j-s) K/W Rth( j-s) K/W Err mJ VF @ Tj = 25°C typ. V IF@ TS = 25°C IFSM @ Tj = 25°C A Rth( j-s) Rth( j-s) K/W Eoff Rth( j-s) mJ Module Eon Err mJ Rectifier VCE(sat) @ Tj = 25°C typ. VF @ Tj = 25°C typ. V Diode ICnom IF@ TS = 25°C A IGBT IC @ TS= 25°C Rth( j-s) A Type Case Eoff Module Eon Rectifier VCE(sat) @ Tj = 25°C typ. 1 Diode ICnom IGBT IC @ TS= 25°C Type IGBT Modules / SEMITOP CLASSES IGBT Modules / SEMITOP 44 44 35 35 1.85 1.85 3.27 3.27 3.3 3.3 1.21 1.21 38 38 2.30 2.30 1.46 1.46 1.55 1.55 - - 225 225 2 3 4 5 2 2 SK 25 GB 12T4 2) 37 25 1.85 2.27 2.7 1.31 30 2.40 1.28 1.91 - - 2 SK 35 GB 12T4 2) 44 35 1.85 3.27 3.3 1.21 40 2.30 1.46 1.55 - - 2 SK 50 GB 12T4 T 2) 71 50 1.85 8.3 5 0.9 50 2.20 2.15 1.24 - - 3 SK 75 GB 12T4 T 2) 80 75 1.85 13.6 8.2 0.74 70 2.10 3.39 0.97 - - 3 SK 100 GB 12T4 T 2) 100 100 1.85 16.6 10 0.6 85 2.25 5.2 0.87 - - 3 SK 50 GH 12T4 T 2) 75 50 1.80 8.3 5 0.65 56 2.20 2.15 1.05 - - 4 SK 100 GH 12T4 T 2) 126 100 1.80 16.6 10 0.43 102 2.20 5.2 0.62 - - 4 6 SK 25 DGDL 12T4 T 2) 45 25 1.85 2.27 2.7 0.96 30 2.40 - 1.7 1.25 370 4 SK 35 DGDL 12T4 T 2) 58 35 1.85 3.27 3.3 0.8 46 2.30 1.46 1.37 1.25 370 4 SK 50 DGDL 12T4 T 2) 75 50 1.85 8.3 5 0.65 60 2.22 2.15 0.97 0.9 700 4 SK35MLI12T4p 43 35 1.85 1.6 3.27 1.21 38 2.30 1.73 1.55 - - 3p SK70MLI12T4Tp 90 70 1.85 1.6 3.27 0.55 78 2.30 1.73 0.73 - - 4p 2.05 2.27 2.7 1.01 30 1.40 1.46 1.38 - 225 2 8 9 7 1200V - IGBT4 (Fast Trench) SK25GAR12F4TSC 1) 37 25 SK150TMLI12F4Tp 1) 148 150 2.05 7.2 4.5 0.35 103 2.20 4 0.62 - - 4p SK80TMLI12F4Tp 1) 88 80 2.05 1.64 3.7 0.54 83 2.17 3.56 0.75 - - 3p Footnotes: 1) Sample status / 2) In production new / 3) Not for new designs 10 Footnotes: 1) Sample status / 2) In production new / 3) Not for new designs 11 58 SEMIKRON SEMIKRON 59 Type IGBT Diode Rectifier Cases Module 6.74625 5.27667 VCE(sat) @ Tj = 25°C typ. Eon Eoff Rth( j-s) IF@ TS = 25°C VF @ Tj = 25°C typ. Err Rth( j-s) Rth( j-s) IFSM @ Tj = 25°C A A V mJ mJ K/W A V mJ K/W K/W A SEMITOP 2 Press-Fit 11 Case ICnom SEMITOP 2 IC @ TS= 25°C 1 LINES IGBT Modules / SEMITOP CLASSES IGBT Modules / SEMITOP Topology Picture 1200V - NPT IGBT (Ultrafast) SK 60 GAL 125 51 50 3.20 8.36 3.32 0.6 43 2.00 2 1.16 - - 2 SK 60 GAR 125 3) 51 50 3.20 8.36 3.32 0.6 43 2.00 2 1.16 - - 2 2 5.355 3.72 8.4175 6.08 SEMITOP 3 SK 60 GB 125 2) 51 50 3.20 8.36 3.32 0.6 57 - 2 0.9 - - 3 SEMITOP 3 Press-Fit 3 4 SK 80 GB 125 T 85 75 3.20 9.9 5 0.32 90 2.00 1 0.65 - - 3 5 Footnotes: 1) Sample status / 2) In production new / 3) Not for new designs 5.5475 3.81667 5.46 5.68333 SEMITOP 4 SEMITOP 4 Press-Fit 6 Cases SEMITOP 1 7 8 5.46 4.91667 9 Dimensions in mm Dimensions in mm 10 11 60 SEMIKRON SEMIKRON 61 K/W 600V - IGBT3 (Trench) Circuit LINES Rth( j-c) A A V mJ mJ K/W A V mJ K/W CLASSES Rth(c-s) 11 Case K/W Err mJ VF @ Tj = 25°C typ. V IF@ TC = 25°C A Rth( j-c) Rth( j-c) K/W Eoff Err mJ Module Eon VF @ Tj = 25°C typ. mJ Diode VCE(sat) @ Tj = 25°C typ. IF@ TC = 25°C V IGBT ICnom Rth( j-c) A Type Rth(c-s) Eoff A Case Eon Module VCE(sat) @ Tj = 25°C typ. 1 Diode ICnom IGBT IC @ TC= 25°C Type IGBT Modules / SEMiX IC @ TC= 25°C IGBT Modules / SEMiX K/W 1200V - V-IGBT SEMiX402GAL066HDs 502 400 1.45 22 24 0.12 543 1.40 10 0.15 2s 0.045 SEMiX101GD12Vs 159 100 1.75 13 11 0.27 121 2.20 7.7 0.48 13 0.04 SEMiX603GAL066HDs 720 600 1.45 12 43 0.087 771 1.40 13 0.11 3s 0.04 SEMiX151GD12Vs 231 150 1.75 19 17 0.19 189 2.14 12 0.31 13 0.04 SEMiX402GAR066HDs 502 400 1.45 22 24 0.12 543 1.40 10 0.15 2s 0.045 SEMiX603GAR066HDs 720 600 1.45 12 43 0.087 771 1.40 13 0.11 3s 0.04 SEMiX223GD12Vc 323 225 1.85 20 27 0.14 263 2.17 16 0.23 33c 0.014 SEMiX303GD12Vc 448 300 1.75 27 36 0.1 327 2.20 21 0.19 33c 0.014 SEMiX453GD12Vc 673 450 1.75 40 54 0.067 516 2.14 33 0.12 33c 0.014 SEMiX202GB066HDs 272 200 1.45 6 8 0.21 291 1.40 6.5 0.27 2s 0.045 SEMiX302GB066HDs 379 300 1.45 12 15 0.16 419 1.40 7.5 0.19 2s 0.045 SEMiX402GB066HDs 502 400 1.45 22 24 0.12 543 1.40 10 0.15 2s 0.045 1200V - IGBT4 (Trench) SEMiX603GB066HDs 720 600 1.45 12 43 0.087 771 1.40 13 0.11 3s 0.04 SEMiX151GAL12E4s 232 150 1.80 17 18 0.19 189 2.14 8.9 0.31 1s 0.075 SEMiX101GD066HDs 139 100 1.45 3 4 0.41 151 1.40 4.5 0.51 13 0.04 SEMiX302GAL12E4s 463 300 1.80 30 44 0.096 356 2.14 19 0.17 2s 0.045 SEMiX151GD066HDs 200 150 1.45 3.8 6.1 0.29 219 1.40 5.8 0.36 13 0.04 SEMiX453GAL12E4s 683 450 1.80 45 67 0.065 544 2.14 28 0.11 3s 0.04 SEMiX201GD066HDs 258 200 1.45 5 8 0.23 284 1.40 7.5 0.28 13 0.04 SEMiX604GAL12E4s 916 600 1.80 35 110 0.049 707 2.14 44 0.086 4s 0.03 SEMiX151GAR12E4s 232 150 1.80 17 18 0.19 189 2.14 8.9 0.31 1s 0.075 SEMiX302GAR12E4s 463 300 1.80 30 44 0.096 356 2.14 19 0.17 2s 0.045 SEMiX453GAR12E4s 683 450 1.80 45 67 0.065 544 2.14 28 0.11 3s 0.04 SEMiX604GAR12E4s 916 600 1.80 35 110 0.049 707 2.14 44 0.086 4s 0.03 SEMiX151GB12E4s 232 150 1.80 17 18 0.19 189 2.14 8.9 0.31 1s 0.075 SEMiX202GB12E4s 312 200 1.80 22 28 0.14 229 2.20 12 0.26 2s 0.045 SEMiX223GB12E4p 1) 326 225 1.85 15 30 0.14 287 2.17 20 0.2 3p 0.009 SEMiX302GB12E4s 463 300 1.80 30 44 0.096 356 2.14 19 0.17 2s 0.045 SEMiX303GB12E4s 466 300 1.80 30 41 0.095 338 2.20 18 0.18 3s 0.04 SEMiX303GB12E4p 2) 469 300 1.80 23 38 0.094 378 2.20 23 0.15 3p 0.009 SEMiX404GB12E4s 618 400 1.80 27 60 0.072 440 2.20 26 0.14 4s 0.03 SEMiX453GB12E4s 683 450 1.80 45 67 0.065 544 2.14 28 0.11 3s 0.04 SEMiX453GB12E4p 2) 678 450 1.80 25 57 0.066 578 2.14 37 0.1 3p 0.009 650V - IGBT4 (Trench) SEMiX305GD07E4 1) SEMiX155MLI07E4 325 300 1.55 5.5 21 0.2 335 1.40 5 0.25 5p t.b.d 2) 187 150 1.55 1 6 0.32 145 1.40 2.3 0.51 5p 0.009 SEMiX205MLI07E4 2) 262 200 1.55 2 10 0.22 255 1.40 4.5 0.31 5p 0.008 SEMiX305MLI07E4 2) 388 300 1.55 2.5 16 0.15 294 1.40 7.7 0.25 5p 0.005 SEMiX405MLI07E4 498 400 1.55 6.1 20 0.12 366 1.40 5.5 0.22 5p 0.007 SEMiX604GB12E4s 916 600 1.80 35 110 0.049 707 2.14 44 0.086 4s 0.03 SEMiX405GARL07E3 1) 457 400 1.45 28 28 0.14 86 1.37 6.3 0.81 5p 0.017 SEMiX603GB12E4p 2) 1110 600 1.80 69 80 0.037 856 2.08 40 0.065 3p 0.009 SEMiX305GARL07E3 1) 353 300 1.45 21 21 0.18 86 1.37 4.7 0.81 5p 0.018 SEMiX453GB12E4Ip 2) 678 450 1.80 33 57 0.066 578 2.14 39 0.1 3Ip 0.009 SEMiX603GB12E4Ip 2) 1110 600 1.80 63 80 0.037 856 2.08 40 0.065 3Ip 0.009 2) Circuit 2 3 4 5 6 7 8 1200V - V-IGBT SEMiX151GAL12Vs 231 150 1.75 19 17 0.19 189 2.14 12 0.31 1s 0.075 SEMiX151GB12Vs 231 150 1.75 19 17 0.19 189 2.14 12 0.31 1s 0.075 SEMiX202GB12Vs 310 200 1.75 25 24 0.14 229 2.20 15 0.26 2s 0.045 SEMiX223GB12Vs 323 225 1.85 20 27 0.14 263 2.17 16 0.23 3s 0.04 SEMiX302GB12Vs 448 300 1.75 37 36 0.1 356 2.14 22 0.17 2s 0.045 SEMiX303GB12Vs 448 300 1.75 27 36 0.1 327 2.20 21 0.19 3s 0.04 SEMiX404GB12Vs 596 400 1.75 39 52 0.075 440 2.20 34 0.14 4s 0.03 SEMiX453GB12Vs 673 450 1.75 40 54 0.067 516 2.14 33 0.12 3s 0.04 SEMiX603GB12Vs 800 600 1.85 50 83 0.057 516 2.42 40 0.12 3s 0.04 SEMiX604GB12Vs 880 600 1.75 59 79 0.051 707 2.14 50 0.086 4s 0.03 SEMiX71GD12E4s 115 75 1.85 7.5 9 0.38 97 2.17 5.3 0.58 13 SEMiX101GD12E4s 160 100 1.80 11 13 0.27 121 2.20 6.5 0.48 13 0.04 SEMiX151GD12E4s 232 150 1.80 14 19 0.19 189 2.14 8.9 0.31 13 0.04 SEMiX223GD12E4c 333 225 1.85 22 31 0.135 270 2.17 17 0.22 33c 0.014 SEMiX303GD12E4c 466 300 1.80 29 42 0.095 338 2.20 23 0.18 33c 0.014 SEMiX453GD12E4c 683 450 1.80 52 68 0.065 544 2.14 28 0.11 33c 0.014 0.04 9 10 Footnotes: 1) Sample status / 2) In production new Footnotes: 1) Sample status / 2) In production new 62 SEMIKRON 11 SEMIKRON 63 SEMiX205GD12E4 2) LINES Rth( j-c) K/W 1200V - IGBT4 (Trench) SEMiX453GM12E4p 1) Err A A V mJ mJ K/W A V mJ K/W SEMiX252GB126HDs 242 150 1.70 20 21 0.15 228 1.60 18 0.24 2s 0.045 SEMiX302GB126HDs 311 200 1.70 30 26 0.12 292 1.60 23 0.19 2s 0.045 SEMiX353GB126HDs 364 225 1.70 27 33 0.1 329 1.60 29 0.17 3s 0.04 SEMiX452GB126HDs 455 300 1.70 35 45 0.083 394 1.60 33 0.15 2s 0.045 SEMiX503GB126HDs 466 300 1.70 28 44 0.08 431 1.60 33 0.13 3s 0.04 SEMiX604GB126HDs 590 400 1.70 36 60 0.065 533 1.60 46 0.11 4s 0.03 SEMiX703GB126HDs 642 450 1.70 32 68 0.061 561 1.60 60 0.11 3s 0.04 SEMiX904GB126HDs 821 600 1.70 60 88 0.05 752 1.60 75 0.081 4s 0.03 SEMiX101GD126HDs 129 75 1.70 10 11 0.27 117 1.60 9 0.46 13 0.04 SEMiX151GD126HDs 168 100 1.70 12 14 0.21 152 1.60 12 0.36 13 0.04 SEMiX251GD126HDs 242 150 1.70 19 22 0.15 207 1.60 15 0.28 13 0.04 SEMiX353GD126HDc 364 225 1.70 27 33 0.1 329 1.60 29 0.17 33c 0.014 SEMiX503GD126HDc 466 300 1.70 28 44 0.08 412 1.60 33 0.14 33c 0.014 SEMiX703GD126HDc 642 450 1.70 32 68 0.061 561 1.59 60 0.11 33c 0.014 Circuit Rth(c-s) 1 Case K/W VF @ Tj = 25°C typ. mJ IF@ TC = 25°C V Rth( j-c) A Eoff Rth( j-c) K/W Eon Err mJ Module VCE(sat) @ Tj = 25°C typ. VF @ Tj = 25°C typ. mJ Diode ICnom IF@ TC = 25°C V IGBT IC @ TC= 25°C Rth( j-c) A Type Rth(c-s) Eoff A Case Eon Module VCE(sat) @ Tj = 25°C typ. 1 Diode ICnom IGBT IC @ TC= 25°C Type IGBT Modules / SEMiX CLASSES IGBT Modules / SEMiX K/W Circuit 1200V - IGBT3 (Trench) 678 281 450 200 1.80 1.80 25 14 57 23 0.066 0.18 578 224 2.14 2.20 37 16 0.1 0.27 3Ip 5p 0.009 0.005 SEMiX155MLI12E4 1) 237 150 1.85 3.5 20 0.18 199 2.17 5.6 0.28 5p t.b.d SEMiX205MLI12E4 1) 326 200 1.80 5 28 0.13 241 2.20 8 0.24 5p t.b.d SEMiX205TMLI12E4B 2) 318 200 1.80 3 SEMiX305TMLI12E4B 2) 479 300 1.80 4.5 SEMiX405TMLI12E4B 2) 636 400 1.80 6 14 0.136 229 2.20 5.9 0.26 5p 0.008 21 0.09 363 2.20 28 0.068 461 2.20 8.8 0.16 5p 0.006 12 0.13 5p 0.005 2 3 4 5 1700V - IGBT4 (Trench) SEMiX155GD17E4 1) 245 150 1.90 - - 0.18 175 2.00 - 0.32 5p t.b.d SEMiX302GAL17E4s 2) 516 300 1.90 140 122 0.083 324 1.98 70 0.184 2s 0.045 SEMiX453GAL17E4s 2) 762 450 1.90 250 190 0.056 482 1.98 100 0.125 3s 0.04 6 1200V - IGBT4 (Fast Trench) SEMiX151GB17E4s 2) 260 150 1.90 52 60 0.162 169 1.98 41 0.345 1s SEMiX202GB17E4s 2) 321 200 1.90 75 82 0.122 213 2.00 55 0.276 2s 0.045 SEMiX302GB17E4s 2) 516 300 1.90 140 122 0.083 324 1.98 70 0.184 2s 0.045 SEMiX303GB17E4s 2) 477 300 1.90 140 125 0.083 311 2.00 85 0.191 3s 0.04 SEMiX404GB17E4s 2) 633 400 1.90 190 165 0.062 412 2.00 97 0.145 4s 0.03 0.056 482 1.98 100 0.125 3s 0.04 0.075 SEMiX155GD12T4 1) 163 150 1.80 13 20 0.35 120 2.14 12 0.63 5p t.b.d 762 450 1.90 250 190 SEMiX105GD12T4 1) SEMiX453GB17E4s 2) 138 100 1.80 13 20 0.35 102 2.20 12 0.63 5p t.b.d SEMiX453GB17E4p 2) 731 450 1.90 131 146 0.06 557 1.98 72 0.1 3p 0.009 SEMiX603GB17E4p 1) 981 600 1.95 225 205 0.037 794 1.88 130 0.073 3p 0.009 SEMiX604GB17E4s 2) 1015 600 1.90 255 255 0.042 629 1.98 150 0.095 4s 0.03 SEMiX453GB17E4Ip 2) 731 450 1.90 153 150 0.06 557 1.98 73 0.1 3Ip 0.009 7 8 1200V - IGBT3 (Trench) SEMiX452GAL126HDs 455 300 1.70 35 45 0.083 394 1.60 33 0.15 2s 0.045 SEMiX703GAL126HDs 642 450 1.70 32 68 0.061 561 1.60 60 0.11 3s 0.04 SEMiX453GD17E4c 2) 762 450 1.90 186 183 0.056 482 1.98 122 0.125 33c 0.014 9 SEMiX703GAR126HDs 642 450 1.70 32 68 0.061 561 1.60 60 0.11 3s 0.04 SEMiX305TMLI17E4C 1) 472 280 1.90 42 51 0.076 388 2.00 45 0.137 5p t.b.d 10 Footnotes: 1) Sample status / 2) In production new Footnotes: 1) Sample status / 2) In production new 11 64 SEMIKRON SEMIKRON 65 Type IGBT Diode Cases Module 5.42167 IC @ TC= 25°C ICnom VCE(sat) @ Tj = 25°C typ. Eon Eoff Rth( j-c) IF@ TC = 25°C VF @ Tj = 25°C typ. Err Rth( j-c) SEMiX 1s A A V mJ mJ K/W A V mJ K/W SEMiX653GAL176HDs 619 450 2.00 300 180 0.054 545 1.70 73 0.11 3s 0.04 SEMiX653GAR176HDs 619 450 2.00 300 180 0.054 545 1.70 73 0.11 3s 0.04 SEMiX252GB176HDs 246 150 2.00 90 55 0.12 288 1.55 32 0.19 2s 0.045 SEMiX302GB176HDs 308 200 2.00 130 77 0.1 389 1.50 43 0.15 2s 0.045 SEMiX353GB176HDs 353 225 2.00 155 85 0.086 428 1.55 45 0.13 3s 0.04 SEMiX452GB176HDs 437 300 2.00 180 110 0.073 389 1.70 46 0.15 2s 0.045 SEMiX453GB176HDs 444 300 2.00 215 125 0.071 545 1.50 65 0.11 3s 0.04 SEMiX604GB176HDs 567 400 2.00 215 165 0.058 740 1.50 95 0.081 4s 0.03 SEMiX653GB176HDs 619 450 2.00 300 180 0.054 545 1.70 73 0.11 3s 0.04 SEMiX854GB176HDs 779 600 2.00 300 250 0.045 740 1.70 170 0.081 4s 0.03 SEMiX353GD176HDc 353 225 2.00 155 85 0.086 428 1.55 45 0.13 33c 0.014 SEMiX453GD176HDc 444 300 2.00 215 125 0.071 545 1.50 65 0.11 33c 0.014 SEMiX653GD176HDc 619 450 2.00 300 180 0.054 545 1.70 73 0.11 33c 0.014 6.255 SEMiX 2s Rth(c-s) 1 Case 1 LINES IGBT Modules / SEMiX CLASSES IGBT Modules / SEMiX K/W Circuit 1700V - IGBT3 (Trench) 2 3 4 6.28833 6.14667 6.88667 42.1875 SEMiX 3s SEMiX 3p 5 6 Footnotes: 1) Sample status / 2) In production new 7 8 7.095 9 42.1875 Dimensions in mm 10 11 66 SEMIKRON SEMIKRON 67 Cases 7.92416 LINES IGBT Modules / SEMiX CLASSES IGBT Modules / SEMiX Cases 4.665 SEMiX 3Ip SEMiX 4s 6.69909 SEMiX 5p 1 1 2 3 4 7.23123 Dimensions in mm 7.67991 4.555 4.18 4.03 SEMiX 13 5 SEMiX 33c 6 7 8 9 4.67 4.665 10 Dimensions in mm 11 68 SEMIKRON SEMIKRON 69 Circuit 600V - IGBT3 (Trench) LINES A A V mJ mJ K/W A V mJ K/W 612 400 1.74 39 42 0.072 440 2.20 26 0.14 3 313 200 1.80 21 27 0.14 229 2.20 13 0.26 3 Circuit 1200V - V-IGBT SKM145GB066D 195 150 1.46 8.5 5.5 0.3 150 1.40 3.5 0.5 2 SKM195GB066D 265 200 1.46 14 8 0.22 200 1.40 5.6 0.4 2 SKM300GB066D 390 300 1.45 7.5 11.5 0.15 350 1.38 10.5 0.25 3 SKM400GB066D 500 400 1.45 8 16 0.12 450 1.40 14 0.2 3 SKM600GB066D 760 600 1.45 7.5 29.5 0.08 700 1.40 25 0.125 3 SKM200GARL066T 2) 280 200 1.45 2.24 7.89 0.21 270 1.45 4 0.39 5 SKM300GARL066T 2) 400 300 1.45 3.5 10.1 0.15 400 1.45 4 0.26 5 SKM400GARL066T 1) 504 400 1.45 4.48 15.78 0.12 421 1.54 8 0.28 5 SKM200GAL12E4 SKM300GAL12E4 422 300 1.85 27 39 0.11 353 2.17 23 0.17 3 SKM400GAL12E4 616 400 1.80 33 56 0.072 440 2.20 30.5 0.14 3 SKM200GAR12E4 313 200 1.80 21 27 0.14 229 2.20 13 0.26 3 SKM300GAR12E4 422 300 1.85 27 39 0.11 353 2.17 23 0.17 3 SKM400GAR12E4 616 400 1.80 33 56 0.072 440 2.20 30.5 0.14 3 SKM300GA12E4 422 300 1.85 23.4 35 0.11 353 2.17 22.2 0.17 4 SKM400GA12E4 616 400 1.80 28 59 0.072 440 2.20 37 0.14 4 SKM600GA12E4 913 600 1.80 74 84 0.049 707 2.14 38 0.086 4 1305 900 1.83 130 121 0.035 871 2.31 53 0.07 4 SKM150MLI066TAT 1) 200 150 1.45 1.7 5.1 0.29 200 1.35 2 0.52 5 SKM200MLI066TAT 2) 280 200 1.45 2.53 6.82 0.21 270 1.4 4 0.39 5 SKM300MLI066TAT 2) 400 300 1.45 3.5 10.1 0.15 324 1.35 4 0.25 5 600V - NPT IGBT (Standard) SKM75GAL063D3) 100 75 2.1 3 2.5 0.35 75 1.55 0.53 0.72 2 SKM300GAL063D3) 400 300 2.1 14 13 0.09 250 1.65 4 0.25 3 SKM400GB12V 100 75 2.1 3 2.5 0.35 75 1.55 0.53 0.72 2 SKM900GA12E4 SKM300GAR063D3) 400 300 2.1 14 13 0.09 250 1.65 4 0.25 3 SKM200GB12E4 313 200 1.80 21 27 0.14 229 2.20 13 0.26 3 SKM300GB12E4 422 300 1.85 27 39 0.11 353 2.17 23 0.17 3 SKM400GB12E4 616 400 1.80 33 56 0.072 440 2.20 30.5 0.14 3 SKM450GB12E4 700 450 1.84 32 60 0.062 440 2.31 28 0.14 3 SKM450GM12E4 1) 700 450 1.84 32 60 0.062 440 2.31 28 0.14 3 SKM50GB063D3) 70 SKM75GB063D3) SKM100GB063D3) 50 2.10 2.5 1.8 0.5 100 75 2.1 3 2.5 0.35 130 100 2.1 4 3 0.27 SKM200GB063D3) 260 200 2.1 11 7.5 0.14 SKM300GB063D3) 400 300 2.1 14 13 0.09 75 1.35 0.48 1 2 75 1.55 0.53 0.72 2 100 1.55 1.5 0.6 2 200 1.55 2.1 0.3 3 250 1.65 4 0.25 3 1200V - V-IGBT SKM150GAL12V 231 150 1.75 13.5 14.2 0.19 189 2.14 8.9 0.31 2 SKM200GAL12VL2 1) 299 200 1.86 - - 0.14 189 2.14 8.9 0.31 2 SKM400GAL12V 612 400 1.74 39 42 0.072 440 2.20 26 0.14 3 612 400 1.74 39 42 0.072 440 2.20 26 0.14 3 SKM300GA12V 420 300 1.84 23 33 0.11 353 2.17 21 0.17 4 SKM400GA12V 612 400 1.74 39 42 0.072 440 2.20 26 0.14 4 SKM600GA12V 908 600 1.75 76 76 0.049 707 2.14 43 0.086 4 3 4 5 6 7 1200V - IGBT4 Fast (Trench) SKM50GAL12T4 81 50 1.85 5.5 4.5 0.53 65 2.22 3.6 0.84 2 SKM100GAL12T4 160 100 1.80 15 10.2 0.27 121 2.20 5.9 0.48 2 SKM150GAL12T4 232 150 1.81 19.2 15.8 0.19 189 2.14 13 0.31 2 SKM200GAL12T4 313 200 1.80 21 20 0.14 229 2.20 13 0.26 3 SKM300GAL12T4 422 300 1.85 27 29 0.11 353 2.17 23 0.17 3 SKM400GAL12T4 616 400 1.80 33 42 0.072 440 2.20 30.5 0.14 3 SKM150GAR12T4 232 150 1.81 19.2 15.8 0.19 189 2.14 13 0.31 2 SKM400GAR12T4 616 400 1.80 33 42 0.072 440 2.20 30.5 0.14 3 SKM300GA12T4 422 300 1.85 23.4 26 0.11 353 2.17 22.2 0.17 4 SKM400GA12T4 616 400 1.80 28 44 0.072 440 2.20 37 0.14 4 SKM600GA12T4 913 600 1.80 74 63 0.049 707 2.14 38 0.086 4 8 9 SKM50GB12V 77 50 1.84 5 4 0.53 65 2.22 3.6 0.84 2 SKM75GB12V 114 75 1.84 6.7 7.1 0.38 97 2.17 4.2 0.58 2 SKM100GB12V 159 100 1.75 10.7 8.7 0.27 121 2.20 5.7 0.48 2 SKM50GB12T4 81 50 1.85 5.5 4.5 0.53 65 2.22 3.8 0.84 2 SKM150GB12V 231 150 1.75 13.5 14.2 0.19 189 2.14 8.9 0.31 2 SKM75GB12T4 115 75 1.85 11 6.9 0.38 97 2.17 4.7 0.58 2 SKM150GB12VG 222 150 1.86 10 16.5 0.2 187 2.17 11 0.31 3 SKM100GB12T4 160 100 1.80 15 10.2 0.27 121 2.20 5.9 0.48 2 SKM200GB12V 311 200 1.76 14 22 0.14 229 2.20 13 0.26 3 SKM100GB12T4G 154 100 1.90 16.1 8.6 0.29 118 2.22 6 0.49 3 SKM300GB12V 420 300 1.84 23 33 0.11 353 2.17 21 0.17 3 SKM150GB12T4 232 150 1.81 19.2 15.8 0.19 189 2.14 13 0.31 2 Footnotes: 1) Sample status / 2) In production new / 3) Not for new designs / 11) Values at Tj=150°C 2 1200V - IGBT4 (Trench) SKM75GAR063D3) SKM400GAR12V CLASSES 1 Case K/W Rth( j-c) mJ Err V VF @ Tj = 25°C typ. A IF@ TC = 25°C Rth( j-c) K/W Rth( j-c) Err mJ Eoff VF @ Tj = 25°C typ. mJ Module Eon IF@ TC = 25°C V Diode VCE(sat) @ Tj = 25°C typ. Rth( j-c) A IGBT ICnom Eoff A Type Case Eon Module VCE(sat) @ Tj = 25°C typ. 1 Diode ICnom IGBT IC @ TC= 25°C Type IGBT Modules / SEMITRANS IC @ TC= 25°C IGBT Modules / SEMITRANS 10 Footnotes: 1) Sample status / 2) In production new / 3) Not for new designs / 11) Values at Tj=150°C 11 70 SEMIKRON SEMIKRON 71 LINES A A V mJ mJ K/W A V mJ K/W Circuit 1200V - IGBT4 Fast (Trench) CLASSES 1 Case K/W Rth( j-c) mJ Err V VF @ Tj = 25°C typ. A IF@ TC = 25°C Rth( j-c) K/W Rth( j-c) Err mJ Eoff VF @ Tj = 25°C typ. mJ Module Eon IF@ TC = 25°C V Diode VCE(sat) @ Tj = 25°C typ. Rth( j-c) A IGBT ICnom Eoff A Type Case Eon Module VCE(sat) @ Tj = 25°C typ. 1 Diode ICnom IGBT IC @ TC= 25°C Type IGBT Modules / SEMITRANS IC @ TC= 25°C IGBT Modules / SEMITRANS Circuit 1200V - NPT IGBT (Ultrafast) SKM150GB12T4G 223 150 1.85 18.7 14.1 0.2 183 2.17 9 0.32 3 SKM200GAL125D 200 150 3.3 14 8 0.09 200 2.06 8 0.25 3 SKM200GB12T4 313 200 1.80 21 20 0.14 229 2.20 13 0.26 3 SKM400GAL125D 400 300 3.3 17 18 0.05 390 2.06 16 0.125 3 SKM200GAR125D 200 150 3.3 14 8 0.09 200 2.06 8 0.25 3 SKM400GAR125D 400 300 3.3 17 18 0.05 390 2.06 16 0.125 3 SKM600GA125D 580 400 3.3 30 22 0.041 500 2.00 24 0.09 4 SKM800GA125D 760 600 3.20 88 48 0.03 720 2.3 28 0.07 4 SKM300GB12T4 422 300 1.85 27 29 0.11 353 2.17 23 0.17 3 SKM400GB12T4 616 400 1.80 33 42 0.072 440 2.20 30.5 0.14 3 SKM450GB12T42) 699 450 1.84 32 49 0.062 461 2.31 28 0.13 3 SKM150GM12T4 1) 232 150 1.81 19.2 15.8 0.19 189 2.14 13 0.31 2 SKM150GM12T4G 229 150 1.85 19.2 15.8 0.19 187 2.17 13 0.31 3 SKM200GM12T4 313 200 1.80 21 20 0.14 229 2.20 13 0.26 3 3 SKM300GM12T4 422 300 1.85 27 29 0.11 353 2.17 23 0.17 SKM400GM12T4 616 400 1.80 33 42 0.072 440 2.20 30.5 0.14 3 SKM300GBD12T4 422 300 1.85 27 29 0.11 56 2.41 30.5 0.94 3 2 3 4 1200V - IGBT4 High Speed (Trench) (new product series, target data) 1) SKM100GAL12F4 143 100 2.10 - - 0.27 - - - 0.48 2 SKM400GAL12F41) 553 400 2.04 - - 0.072 - - - 0.14 3 SKM100GAR12F41) 143 100 2.10 - - 0.27 - - - 0.48 2 SKM400GAR12F41) 553 400 2.04 - - 0.072 - - - 0.14 3 SKM75GB12F41) 104 75 2.08 - - 0.38 - - - 0.58 2 SKM100GB12F41) 143 100 2.10 - - 0.27 - - - 0.48 2 SKM150GB12F4G1) 203 150 2.05 - - 0.2 - - - 0.32 3 SKM200GB12F41) 281 200 2.06 - - 0.14 - - - 0.26 3 SKM300GB12F41) 422 300 2.06 - - 0.11 - - - 0.17 3 SKM400GB12F41) 553 400 2.04 - - 0.072 - - - 0.14 3 SKM100GB125DN 100 75 3.3 9 3.5 0.18 95 2.06 4 0.5 2N SKM200GB125D 200 150 3.3 14 8 0.09 200 2.06 8 0.25 3 SKM300GB125D 300 200 3.3 16 11 0.075 260 2.00 13 0.18 3 SKM400GB125D 400 300 3.3 17 18 0.05 390 2.06 16 0.125 3 SKM25GD125D 2) 39 25 3.20 3.9 1.6 0.56 47 2.13 1.1 1 6 SKM50GD125D 2) 73 50 3.20 8 3.2 0.32 77 2.00 2.1 0.6 6 SKM25GAH125D 2) 39 25 3.20 3.9 1.6 0.56 47 2.13 1.1 1 6 5 6 7 1700V - IGBT3 (Trench) 1200V - IGBT3 (Trench) SKM195GAL126D 220 150 1.71 16 24.5 0.16 143 2.00 5.8 0.32 2 SKM200GAL126D 260 150 1.71 18 24 0.13 200 1.60 18 0.3 3 SKM400GAL126D 470 300 1.69 29 48 0.08 352 1.60 27 0.18 3 SKM600GAL126D 660 400 1.70 39 64 0.055 490 1.60 41 0.125 3 SKM600GA126D 660 400 1.70 39 64 0.055 490 1.60 41 0.125 4 SKM800GA126D 910 600 1.70 65 95 0.042 703 1.60 59 0.09 4 SKM195GB126D 220 150 1.71 16 24.5 0.16 143 2.00 5.8 0.32 2 SKM200GB126D 260 150 1.71 18 24 0.13 200 1.60 18 0.3 3 SKM300GB126D 310 200 1.70 21 33 0.12 250 1.60 18 0.25 3 SKM400GB126D 470 300 1.69 29 48 0.08 352 1.60 27 0.18 3 SKM600GB126D 660 400 1.70 39 64 0.055 490 1.60 41 0.125 3 Footnotes: 1) Sample status / 2) In production new / 3) Not for new designs / 11) Values at Tj=150°C SKM145GAL176D 160 100 2.00 60 38 0.19 140 1.6 27.5 0.36 2 SKM200GAL176D 260 150 2.01 93 58 0.12 210 1.70 31 0.25 3 SKM400GAL176D 432 300 1.99 170 118 0.075 440 1.70 78 0.125 3 8 SKM400GAR176D 432 300 1.99 170 118 0.075 440 1.70 78 0.125 3 SKM600GA176D 660 400 2.00 255 155 0.044 600 1.6 102 0.09 4 SKM800GA176D 830 600 2.00 335 245 0.04 630 1.6 155 0.07 4 SKM75GB176D 80 50 2.00 25 18 0.38 80 1.70 14.5 0.55 2 SKM100GB176D 125 75 1.98 44 28.5 0.24 100 1.6 21.4 0.45 2 SKM145GB176D 160 100 2.00 60 38 0.19 140 1.6 27.5 0.36 2 SKM200GB176D 260 150 2.01 93 58 0.12 210 1.70 31 0.25 3 SKM400GB176D 432 300 1.99 170 118 0.075 440 1.70 78 0.125 3 9 10 Footnotes: 1) Sample status / 2) In production new / 3) Not for new designs / 11) Values at Tj=150°C 11 72 SEMIKRON SEMIKRON 73 Circuit 1700V - NPT IGBT (Standard) SKM200GAL173D3) SKM200GAR173D3) SKM400GA173D3) LINES A A V mJ mJ K/W A V mJ K/W CLASSES 1 Case K/W Rth( j-c) mJ Err V VF @ Tj = 25°C typ. A IF@ TC = 25°C Rth( j-c) K/W Rth( j-c) Err mJ Eoff VF @ Tj = 25°C typ. mJ Module Eon IF@ TC = 25°C V Diode VCE(sat) @ Tj = 25°C typ. Rth( j-c) A IGBT ICnom Eoff A Type Case Eon Module VCE(sat) @ Tj = 25°C typ. 1 Diode ICnom IGBT IC @ TC= 25°C Type IGBT Modules / SEMITRANS IC @ TC= 25°C IGBT Modules / SEMITRANS Circuit 1700V - IGBT4 (Trench) chip - dedicated for humid environment (target data) 220 220 440 150 150 300 3.4 3.4 3 95 95 180 45 45 10 0.1 0.1 0.05 150 150 300 2.2 2.2 2.2 21 21 46 0.32 0.32 0.17 3 3 SKM75GB173D3) 75 50 3.4 18 13 0.25 60 2.2 10.5 0.75 2 110 75 3.4 35 21 0.2 80 2.2 11.5 0.63 2 SKM150GB173D3) 150 100 3.4 60 32 0.125 125 2.2 14 0.4 3 SKM200GB173D3) 220 150 3.4 95 45 0.1 150 2.2 21 0.32 3 1700V - IGBT4 (Trench) 164 100 1.90 SKM200GAL17E4 2) 321 200 1.90 SKM400GAL17E4 2) 614 400 1.92 43 39 0.234 113 2.00 69 79 0.122 213 156.5 180 0.066 443 118 75 1.93 37 29 0.304 88 2.00 18 0.632 2 SKM150GB17E4GH16 1) 228 150 1.96 69 59 0.161 163 2.00 36 0.356 3 SKM300GB17E4H16 1) 449 300 1.97 106 122 0.083 314 2.00 71 0.19 3 2 1700V - SPT ++ ( new product series, target data) SKM1000GAL17S2 1) 1460 1000 2.30 395 326 0.027 1427 1.78 185 0.043 10 SKM1400GAL17S2 1) 1947 1400 2.31 712 417 0.021 1672 1.84 215 0.038 10 SKM1000GAR17S2 1) 1460 1000 2.30 395 326 0.027 1427 1.78 185 0.043 10 SKM1400GAR17S2 1) 1947 1400 2.31 712 417 0.021 1672 1.84 215 0.038 10 SKM1000GB17S2 2) 1460 1000 2.30 395 326 0.027 1427 1.78 185 0.043 10 SKM1400GB17S2 1) 1947 1400 2.31 712 417 0.021 1672 1.84 215 0.038 10 3 4 SKM100GB173D3) SKM100GAL17E4 2) SKM75GB17E4H16 1) 26 0.504 2 2.00 45 0.276 3 2.00 130 0.13 3 4 5 6 SKM100GAR17E4 2) 164 100 1.90 43 39 0.234 113 2.00 26 0.504 2 SKM200GAR17E4 2) 3300V - N-Channel F-IGBT (new product series, target data) 321 200 1.90 69 79 0.122 213 2.00 45 0.276 3 SKM400GAR17E4 2) 614 400 1.92 156.5 180 0.066 443 2.00 130 0.13 3 SKM450GB33F1) 11) SKM600GA17E4 2) 1021 600 1.90 258 246 0.042 629 1.98 132 0.095 4 SKM75GB17E4 2) 125 75 1.93 30 29 0.304 88 2.00 21 0.632 2 - 450 2.85 750 770 0.033 - 2.45 740 0.051 20 7 Footnotes: 1) Sample status / 2) In production new / 3) Not for new designs / 11) Values at Tj=150°C SKM100GB17E4 2) 164 100 1.90 43 39 0.234 113 2.00 26 0.504 2 SKM150GB17E4 2) 261 150 1.90 67 59 0.162 169 1.98 32 0.345 2 SKM150GB17E4G 1) 242 150 1.90 - - 0.161 163 2.00 - 0.356 3 SKM200GB17E4 2) 321 200 1.90 69 79 0.122 213 2.00 45 0.276 3 SKM300GB17E4 2) 476 300 1.91 88 121 0.083 314 2.00 77 0.19 3 SKM400GB17E4 2) 614 400 1.92 156.5 180 0.066 443 2.00 130 0.13 3 SKM400GM17E4 2) 614 400 1.92 156.5 180 0.066 443 2.00 130 0.13 3 8 9 Footnotes: 1) Sample status / 2) In production new / 3) Not for new designs / 11) Values at Tj=150°C 10 11 74 SEMIKRON SEMIKRON 75 Cases 2.40154 Cases 5 SEMITRANS 2 LINES IGBT Modules / SEMITRANS CLASSES IGBT Modules / SEMITRANS 5.96 SEMITRANS 2N 2.35294 SEMITRANS 5 SEMITRANS 6 1 1 2 3 4 2.67568 5.74667 2.43302 2.10149 SEMITRANS 3 5 SEMITRANS 4 5.65833 2.67474 Dimensions in mm 6 7 8 9 2.67601 2.67463 10 Dimensions in mm 11 76 SEMIKRON SEMIKRON 77 LINES IGBT Modules / SEMITRANS Cases Cases SEMITRANS 10 SEMITRANS 20 CLASSES IGBT Modules / SEMITRANS 1 1 2 3 4 5 Dimensions in mm 6 Dimensions in mm 7 8 9 10 11 78 SEMIKRON SEMIKRON 79 Circuit LINES A A V mJ mJ K/W A V mJ K/W 260 300 2.00 170 120 0.175 215 1.7 - 0.29 CLASSES 1 Case K/W Rth( j-s) mJ Err V VF @ Tj = 25°C typ. A IF@ TS = 25°C Rth( j-s) K/W Rth( j-s) Err mJ Eoff VF @ Tj = 25°C typ. mJ Module Eon IF@ TS = 25°C V Diode VCE(sat) @ Tj = 25°C typ. Rth( j-s) A IGBT ICnom Eoff A Type Case Eon Module VCE(sat) @ Tj = 25°C typ. 1 Diode ICnom IGBT IC @ TS= 25°C Type IGBT Modules / SKiM 4/5 IC @ TS= 25°C IGBT Modules / SKiM 4/5 Circuit 1700V - IGBT3 (Trench) 600V - IGBT3 (Trench) SKiM301MLI07E4 2) 252 300 1.55 2.8 17 0.3 177 1.40 - 0.53 4 SKiM401MLI07E4 2) 314 400 1.55 3.3 21 0.25 289 1.40 1.8 0.31 4 SKiM601MLI07E4 2) 433 600 1.55 6.1 44 0.19 318 1.39 2.4 0.31 4 SKiM270GD176D 2 5 1200V - IGBT3 (Trench) SKiM200GD126D 3) SKiM300GD126D - 200 1.65 15 25 - 152 2.39 - 0.35 4 265 300 1.70 28 47 0.2 260 1.92 - 0.285 4 SKiM300GD126DL 3) 265 300 1.65 28 47 0.2 260 1.92 - 0.285 4 SKiM400GD126DM 330 300 1.70 29 46 0.134 300 1.92 - 0.19 4 SKiM400GD126DLM 330 300 1.65 29 46 0.134 300 1.92 - 0.19 4 Cases 6.83667 SKiM450GD126D 390 450 1.70 42 70 0.13 345 1.92 - 0.19 5 SKiM450GD126DL 3) 390 450 1.65 42 70 0.13 345 1.92 - 0.19 5 SKiM600GD126DLM 480 450 1.65 42 70 0.09 450 1.92 - 0.125 5 SKiM601GD126DM 480 450 1.70 42 70 0.09 450 1.92 - 0.125 5 SKiM304GD12T4D 3) 312 300 1.80 - - 0.19 221 2.33 - 0.25 4 SKiM455GD12T4D1 3) 400 450 1.80 34 40 0.14 295 2.33 28 0.19 5 SKiM201MLI12E4 2) 206 200 1.80 15 23 0.29 187 2.20 15 0.36 4 SKiM301MLI12E4 2) 311 300 1.80 22 34 0.19 282 2.20 15 0.24 4 SKiM301TMLI12E4B 2) 311 300 1.80 6.6 19 0.19 249 2.20 1.8 0.29 4 SKiM301TMLI12E4C 1) 294 300 1.80 6.6 19 0.21 274 2.20 1.8 0.25 4 SKiM401TMLI12E4B 2) 388 400 1.80 8.8 26 0.16 311 2.20 2.4 0.24 4 SKiM601TMLI12E4B 2) 529 600 1.80 11 45 0.125 495 2.14 4.4 0.15 4 SKiM120GD176D 110 125 2 72 46 0.4 105 1.6 22 0.56 4 SKiM220GD176DH4 220 250 2 145 100 0.21 220 1.7 65 0.26 4 3 Footnotes: 1) Sample status / 2) In production new / 3) Not for new designs 8.43333 SKiM 4 SKiM 5 4 5 1200V - IGBT4 (Trench) 6 7 6.63667 6.57 8 Dimensions in mm 1700V - IGBT3 (Trench) 9 10 Footnotes: 1) Sample status / 2) In production new / 3) Not for new designs 11 80 SEMIKRON SEMIKRON 81 Diode 900 V mJ mJ K/W A V mJ K/W 1.45 8 25 0.135 360 1.53 12 0.243 63 1.45 16 53 0.105 453 1.60 21 0.201 63 1.45 36 88 0.078 712 1.52 29 0.135 93 LINES 1 Case 899 Rth( j-s) SKiM909GD066HD10) Err 600 VF @ Tj = 25°C typ. 400 641 IF@ TS = 25°C 468 SKiM606GD066HD10) Rth( j-s) SKiM406GD066HD10) Eoff A SKiM 63 Eon A 1 Cases Module VCE(sat) @ Tj = 25°C typ. ICnom IGBT IC @ TS= 25°C Type IGBT Modules / SKiM 63/93 CLASSES IGBT Modules / SKiM 63/93 Circuit 600V - IGBT3 (Trench) 2 3 1200V - IGBT4 (Trench) SKiM609GAL12E4 2) 748 600 1.85 136 83 0.068 1397 1.7 39 0.048 93 SKiM609GAR12E4 2) 748 600 1.85 136 83 0.068 1397 1.7 39 0.048 93 SKiM306GD12E410) 410 300 1.85 19 39 0.116 302 2.14 21 0.218 63 SKiM459GD12E410) 556 450 1.85 22 57 0.092 438 2.14 40 0.155 93 4 5 SKiM 93 6 1700V - IGBT4 (Trench) SKiM429GD17E4HD2) 10) 595 420 1.90 245 180 0.079 413 1.66 99 0.169 93 7 Footnotes: 2) In production new / 10) Also available with new HpTp, see Accessories/Thermal Interface Materials 8 9 10 Dimensions in mm 82 SEMIKRON 11 SEMIKRON 83 Full SiC SEMIKRON offers hybrid and full silicon carbide power modules in MiniSKiiP, SEMITOP, SEMITRANS3, SEMiX3 Press-Fit and SKiM63/93. Latest IGBT technology is combined with SiC Schottky diodes to increase the switching frequency and reduce power losses at the same time. Silicon carbide MOSFETs, either with or without anti-parallel SiC Schottky diodes, create even higher gains in switching frequency and power density. 2 LINES Silicon Carbide Modules CLASSES Silicon Carbide Modules for Highest Energy Efficiency The SEMIKRON silicon carbide power modules are available from 8A to 500A in 1200V. Covered topologies are 6-packs, also with split output configurations, half bridges and triple boost converters. Additionally further topologies like 3-level or H-bridge designs are easily adaptable to silicon carbide and will complete the portfolio. MiniSKiiP ® 1200V 6-pack 1 I in A SEMITOP ® 0 40 60 80 100 200 300 400 500 600 1200V 2 6-pack chopper H-bridge I in A SEMITRANS ® 0 40 60 80 100 200 300 400 500 600 3 1200V half bridge 4 ProductPage Full SiC I in A MiniSKiiP86 SEMITOP 88 SEMITRANS 90 Hybrid SiC MiniSKiiP91 SEMiX Press-Fit 92 SEMITRANS 93 0 40 60 80 100 200 300 400 500 600 Hybrid SiC MiniSkiiP ® 5 1200V 6-pack 6 SKiM94 I in A SEMiX Press-Fit ® 0 40 60 80 100 200 300 400 500 600 7 1200V half bridge I in A SEMITRANS ® 0 40 60 80 100 200 300 400 500 600 8 1200V half bridge 9 I in A For detailed information SKiM ® 63/93 0 40 60 80 100 200 300 400 500 600 1200V 10 6-pack please refer to data sheets. Further information: www.semikron.com/full-sic www.semikron.com/hybrid-sic 84 SEMIKRON I in A 0 40 60 80 100 200 300 400 500 SEMIKRON 600 85 11 LINES Cases ID @ TC = 25°C RDS(on) @ Tj = 25°C typ. Rth( j-s) MiniSKiiP II 1 VDS Type SiC Modules / Full SiC / MiniSKiiP CLASSES SiC Modules / Full SiC / MiniSKiiP V A mΩ K/W SKiiP 13ACM12V17 1) 1200 25 80 1.5 II 1 SKiiP 13ACM12V18 1) 1200 25 80 1.5 II 1 SKiiP 26ACM12V17 1) 1200 75 23 0.6 II 2 Case 1 Circuit 1200V - SiC MOSFET 2 2 3 MiniSKiiP II 2 4 5 Footnotes: 1) Sample status Dimensions in mm 6 7 8 9 10 11 86 SEMIKRON SEMIKRON 87 LINES Cases ID @ TC = 25°C RDS(on) @ Tj = 25°C typ. Rth( j-s) SEMITOP 2 Press-Fit VDS Type SiC Modules / Full SiC / SEMITOP CLASSES SiC Modules / Full SiC / SEMITOP V A mΩ K/W SK45MAHT12SCp 1) 1200 41 45 1 3p SK45MLET12SCp 1) 1200 41 45 1 3p Case 1 Circuit 1200V - SiC MOSFET 2 2 3 SEMITOP 3 Press-Fit SK45MH120TSCp 1) 1200 41 45 1 2p SK25MH120TSCp 1) 1200 26 80 1.4 2p 4 Footnotes: 1) Sample status 5 Dimensions in mm 6 7 8 9 10 11 88 SEMIKRON SEMIKRON 89 1200V - SiC MOSFET 2 Rth( j-s) IF@ TS = 25°C VF Rth( j-s) Circuit Eoff A A V mJ mJ K/W A V K/W LINES Circuit 1200V - IGBT4 (Fast Trench) SKM500MB120SC 1) 1200 541 3.8 0.07 3 SKiiP25AC12F4V191) 72 50 2.05 2.2 2.8 0.53 49 1.40 0.98 II 2 SKM350MB120SCH15 1) 1200 523 5.6 0.045 3 SKiiP38AC12F4V191) 128 100 2.05 6.4 6.3 0.33 71 1.40 0.72 II 3 SKiiP39AC12F4V191) 175 150 2.05 9.6 9.4 0.26 76 1.40 0.33 II 3 SKM350MB120SCH17 1) CLASSES 1 Case K/W Eon mΩ Module VCE(sat) @ Tj = 25°C typ. A Diode Current (A) Rth( j-c) V IGBT Case RDS(on) @ Tj = 25°C typ. Type ID @ TC = 25°C VDS Type SiC Modules / Hybrid SiC / MiniSKiiP IC @ TS= 25°C SiC Modules / Full SiC / SEMITRANS 1200 523 5.6 0.045 2 3 3 Footnotes: 1) Sample status Footnotes: 1) Sample status Cases MiniSKiiP II 2 4 Cases SEMITRANS 3 5 6 MiniSKiiP II 3 7 8 Dimensions in mm 9 Dimensions in mm 10 11 90 SEMIKRON SEMIKRON 91 K/W 1200V - IGBT4 (Trench) 2 SEMiX603GB12E4SiCp 1) Footnotes: 1) Sample status Circuit LINES CLASSES Rth( j-c) A A V mJ mJ K/W A V K/W 281 200 2.06 7 17 0.14 246 1.40 0.21 3 0.038 313 200 1.80 7 20 0.14 246 1.40 0.21 3 0.038 Rth(c-s) 1 Case K/W VF V IF@ TC = 25°C A Rth( j-c) K/W Eoff Rth( j-c) mJ Module Eon VF mJ Diode VCE(sat) @ Tj = 25°C typ. IF@ TC = 25°C V IGBT Current (A) Rth( j-c) A Type Rth(c-s) Eoff A Case Eon Module VCE(sat) @ Tj = 25°C typ. Diode Current (A) IGBT IC @ TC= 25°C Type SiC Modules / Hybrid SiC / SEMITRANS IC @ TC= 25°C SiC Modules / Hybrid SiC / SEMiX K/W Circuit 1200V - IGBT4 (Fast Trench) 1110 600 1.80 28 80 0.037 390 1.40 0.14 3p 0.012 SKM200GB12F4SiC2 1) 2 1200V - IGBT4 (Trench) SKM200GB12T4SiC2 1) 3 Cases SEMiX 3p 4 Footnotes: 1) Sample status Cases SEMITRANS 3 5 6 7 8 Dimensions in mm 9 Dimensions in mm 10 11 92 SEMIKRON SEMIKRON 93 Eon Eoff Rth( j-s) IF@ TS = 25°C VF Rth( j-s) LINES Module VCE(sat) @ Tj = 25°C typ. Diode Current (A) A A V mJ mJ K/W A V K/W 507 450 2.05 9 35 0.092 375 1.40 0.15 1 Case IGBT IC @ TS= 25°C Type CLASSES SiC Modules / Hybrid SiC / SKiM 63/93 Circuit 1200V - IGBT4 (Fast Trench) 2 SKiM459GD12F4SC4 1) 2 93 3 Footnotes: 1) Sample status Cases SKiM 93 4 5 6 7 8 9 Dimensions in mm 10 11 94 SEMIKRON SEMIKRON 95 LINES MOSFET Modules CLASSES MOSFET Modules Best in Class Switching Performance SEMITOP ® SEMIKRON produces MOSFET (Metal Oxide Semiconductor Field Effect Transistor) modules in single switch, halfbridge, H-bridge and 6-pack configuration in SEMITOP and SEMITRANS packages. 55V up to 600V 6-pack H-bridge The available MOSFET modules in the voltage range of 55V up to 600V and current ratings of 40A up to 290A are especially designed for high-speed switching offering low switching losses. 1 half bridge ID@ 25 ºC in A SEMITRANS ® 0 100 200 300 2 100V up to 200V single switch ProductPage 3 3 SEMITOP98 SEMITRANS 100 ID@ 25 ºC in A 0 100 200 300 4 5 6 7 8 9 10 For detailed information please refer to data sheets. Further information: www.semikron.com/mosfet-modules 96 SEMIKRON 11 SEMIKRON 97 LINES Cases ID @ TC = 25°C RDS(on) @ Tj = 25°C typ. Rth( j-s) SEMITOP 2 VDS V A mΩ K/W 55 117 2.2 1.1 1 Case Type MOSFET Modules / SEMITOP CLASSES MOSFET Modules / SEMITOP Topology Picture 55V SK 80 MBBB 055 2 3 3 3 SEMITOP 3 75V SK 300 MB 075 3) 75 290 - 0.45 3 4 100V SK 260 MB 10 100 230 - 0.45 3 SK 85 MH 10 T 100 80 - 1.1 2 5 6 Dimensions in mm 7 Footnotes: 3) Not for new designs 8 9 10 11 98 SEMIKRON SEMIKRON 99 LINES ID @ TC = 25°C RDS(on) @ Tj = 25°C typ. Rth( j-c) VDS Type CLASSES MOSFET Modules / SEMITRANS V A mΩ K/W SKM 111 AR 100 200 7 0.18 M1 SKM 111 RZR 100 200 7 0.18 M1 200 180 9 0.18 M1 Case 1 Circuit 100V 3 2 200V SKM 180 A020 3 4 Cases SEMITRANS M1 5 6 7 8 9 10 Dimensions in mm 11 100 SEMIKRON SEMIKRON 101 LINES Thyristor / Diode Modules CLASSES Thyristor / Diode Modules with Proven Packages SEMITOP ® 1 / 2 / 3 The SEMIKRON thyristor modules are available in different packages like SEMIPACK, SEMiSTART, Thyristor / Diode Modules, SEMIPONT and SEMITOP. Modules in different packaging technologies are available: soldered, wire bonded and pressure contact modules with and without baseplate. 800V up to 1600V W1C, WT, W3C single switch PCB contacting is possible by soldered pins, pressfit contacts or plug connectors. The thyristor modules are offered in a variety of dual and single topologies for almost all phase control or rectifier applications. 1 ITAV / FAV in A SEMiX 1 / 2 ® All thyristor modules are equipped with SEMIKRON chips. The product line offers Thyristor / Diode Modules. A product range with voltages up to 2200V. Thanks to the comprehensive product range, the optimal solution for each application can be found. 0 100 200 400 600 800 1000 1200 2 1600V half bridge 3 ITAV / FAV in A SEMIPONT ® 5 4 ProductPage SEMITOP 1 / 2 / 3 104 SEMiX 1 / 2 106 SEMIPONT 5 107 SEMIPACK 0 / 1 / 2 / 3 / 4 / 5 / 6 108 SEMiSTART 113 0 100 300 400 600 800 1000 1200 4 1200V up to 1600V W3C 5 IRMS in A SEMIPACK ® 0 / 1 / 2 / 3 / 4 / 5 / 6 0 100 300 400 600 800 1000 1200 200V up to 2200V 6 single switch half bridge ITAV / FAV in A SEMiSTART ® 0 100 300 400 600 800 1000 1200 7 1400V up to 1800V W1C 8 Ioverload in A 0 500 1000 1500 2000 2500 3000 9 10 For detailed information please refer to data sheets. Further information: www.semikron.com/thyristor-diode-modules 102 SEMIKRON 11 SEMIKRON 103 TS ITSM IFSM @ Tjmax VT(TO) @ Tjmax rT @ Tjmax Rth( j-s)per chip Tj V A °C A V mΩ K/W °C Case ITAV IFAV @ TS SEMITOP 1 SK 25 KQ 800-1600 29 85 280 1.1 20.00 1.7 -40 ... +125 1 800-1600 47 85 380 1 10.00 1.2 -40 ... +125 1 SK 70 KQ 800-1600 72 85 900 1 6.00 0.8 -40 ... +125 1 SK 100 KQ 800-1600 101 85 1350 0.9 4.50 0.6 -40 ... +125 2 800-1600 134 85 1800 0.9 3.50 0.45 -40 ... +125 2 SK 35 TAA 800-1600 35 80 380 0.85 9.10 1.2 -40 ... +130 2 SK 55 TAA 800-1600 55 80 900 0.85 5.70 0.8 -40 ... +130 2 SK 75 TAA 2) 800-1600 75 80 1500 0.9 4.50 0.6 -40 ... +130 2 SK 100 TAA 2) 800-1600 100 80 2000 0.9 3.50 0.45 -40 ... +130 2 2) 1 Circuit SK 45 KQ SK 120 KQ LINES Cases VRRM VDRM Type Thyristor / Diode Modules / SEMITOP CLASSES Thyristor / Diode Modules / SEMITOP 2 3 SK 75 TAE 12 1200 75 80 1250 0.85 4.40 0.6 -40 ... +130 2 SEMITOP 2 4 SK 25 WT 800-1600 29 85 280 1.1 20.00 1.7 -40 ... +125 2 SK 45 WT 800-1600 47 85 380 1 10.00 1.2 -40 ... +125 2 SK 70 WT 800-1600 72 85 900 1 6.00 0.8 -40 ... +125 3 SK 100 WT 800-1600 101 85 1350 0.9 4.50 0.6 -40 ... +125 3 4 5 6 SK 35 BZ 2) 800-1600 35 80 270 0.85 14.00 1.7 -40 ... +125 2 SEMITOP 3 SK 45 STA 800-1600 47 75 380 1 10.00 1.2 -40 ... +125 7 3 8 SK 25 UT 800-1600 29 85 280 1.1 20.00 1.7 -40 ... +125 3 SK 45 UT 800-1600 47 85 380 1 10.00 1.2 -40 ... +125 3 SK 30 DTA 800-1600 25 80 900 1 6.00 1.7 -40 ... +150 3 SK 60 DTA 800-1600 61 80 1350 0.9 0.60 0.6 -40 ... +125 3 SK 80 DTA 800-1600 65 80 1800 0.9 3.50 1 -40 ... +150 3 9 Dimensions in mm 10 Footnotes: 2) In production new 11 104 SEMIKRON SEMIKRON 105 SEMiX171KH16s 1600 170 85 4800 SEMiX302KH16s 1600 300 85 8000 0.18 0.075 -40 ... +130 1s 1.1 0.091 0.045 -40 ... +130 2s 0.85 1.5 0.18 0.075 -40 ... +130 1s 0.85 1.1 0.091 0.045 -40 ... +130 2s LINES V A °C A V mΩ K/W °C SKUT 85/16 T V2 2) 1600 94 85 1050 1.1 6.0 - -40 ... +125 SKUT 85/12 T V2 2) 1200 94 85 1050 1.1 6.0 - -40 ... +125 5 SKUT 115/16T V2 2) 1600 127 85 1250 0.9 5 - -40 ... +125 5 SKUT 115/12T V2 2) 1200 127 85 1250 0.9 5 - -40 ... +125 5 SKUT 85/12 V2 2) 1200 85 85 1050 1.1 6.0 0.85 -40 ... +125 5 SKUT 85/16 V2 2) 1600 85 85 1050 1.1 6.0 0.85 -40 ... +125 5 SKUT 115/12 V2 2) 1200 105 85 1250 0.9 5.0 0.63 -40 ... +125 5 SKUT 115/16 V2 2) 1600 105 85 1250 0.9 5.0 0.63 -40 ... +125 5 Case 0.95 SEMiX141KT16s 1600 140 85 3000 0.85 2.1 0.21 0.075 -40 ... +130 1s SEMiX302KT16s 1600 300 85 8000 0.85 1.7 0.091 0.045 -40 ... +130 2s 1 Case 0.85 Circuit Tj 0.85 7500 Rth( j-s) cont. per chip 5000 85 rT @ Tjmax 85 300 °C VT(TO) @ Tjmax 190 1600 K/W ITSM IFSM @ Tjmax 1600 SEMiX302KD16s K/W TS SEMiX191KD16s mΩ ITAV IFAV @ TS V VRRM VDRM A Tj °C Rth(c-s) VT(TO) @ Tjmax A Rth( j-c)per chip ITSM IFSM @ Tjmax V rT @ Tjmax TC Type ITAV IFAV @ TC VRRM VDRM Type Thyristor / Diode Modules / SEMIPONT CLASSES Thyristor / Diode Modules / SEMiX Circuit 5 2 3 Footnotes: 2) In production new Cases 5.78167 6.75667 SEMiX 1s SEMiX 2s 4 Cases SEMIPONT 5 4 5 6 7 8 7.18833 9 7.51167 Dimensions in mm Dimensions in mm 10 11 106 SEMIKRON SEMIKRON 107 LINES Rth(c-s) per chip A V mΩ K/W K/W °C 13.5 85 280 1.1 20 1.6 0.2 -40 ... +125 0 Circuit 800-1800 392 85 12000 0.92 0.3 0.09 0.02 -40 ... +130 4 SKKT 20 800-1600 18 85 280 1 16 1.2 0.2 -40 ... +125 1 2200 819 85 26500 0.82 0.17 0.0405 0.015 -40 ... +125 6 SKKT 20B 800-1600 18 85 280 1 16 1.2 0.2 -40 ... +125 1 SKET 801/18 E 1800 819 85 30000 0.82 0.17 0.0405 0.015 -40 ... +125 6 SKKT 27 800-1600 25 85 480 0.9 12 0.9 0.2 -40 ... +125 1 SKKE 15 600-1600 14 85 280 0.85 15 2 0.2 -40 ... +125 0 SKKT 27B 800-1600 25 85 480 0.9 12 0.9 0.2 -40 ... +125 1 SKKE 81 400-2200 82 85 1750 0.85 1.8 0.4 0.2 -40 ... +125 1 SKKT 42 800-1800 40 85 850 1 4.5 0.65 0.2 -40 ... +125 1 SKKE 162 800-1800 195 85 5000 0.85 1.2 0.18 0.1 -40 ... +135 2 SKKT 42B 800-1800 40 85 850 1 4.5 0.65 0.2 -40 ... +125 1 SKKE 380 1200-1600 380 100 10000 0.8 0.35 0.11 0.04 -40 ... +150 3 SKKT 57 800-1800 50 85 1250 0.9 3.5 0.57 0.2 -40 ... +125 1 SKKE 600 1200-2200 600 100 18000 0.75 0.25 0.07 0.02 -40 ... +150 4 SKKT 57B 800-1800 50 85 1250 0.9 3.5 0.57 0.2 -40 ... +125 1 2200 1360 85 35000 0.75 0.073 0.047 0.015 -40 ... +125 6 SKKT 57 H4 2000-2200 50 85 1250 0.9 3.5 0.57 0.2 -40 ... +125 1 800-1800 95 85 1750 0.9 2 0.28 0.2 -40 ... +125 1 SKKT 58/16 E 1600 55 85 1200 1 4.8 0.47 0.22 -40 ... +130 1 SKKT 58B16 E 1600 55 85 1200 1 4.8 0.47 0.22 -40 ... +130 1 SKKT 72 800-1800 70 85 1450 0.9 3.5 0.35 0.2 -40 ... +125 1 SKKT 72B 800-1800 70 85 1450 0.9 3.5 0.35 0.2 -40 ... +125 1 SKKT 72 H4 2000-2200 70 85 1450 0.9 3.5 0.35 0.2 -40 ... +125 1 SKKT 92 800-1800 95 85 1750 0.9 2 0.28 0.2 -40 ... +125 1 SKKT 92B 800-1800 95 85 1750 0.9 2 0.28 0.2 -40 ... +125 1 SKKT 106 800-1800 106 85 1900 0.9 2 0.28 0.2 -40 ... +130 1 SKKT 106B 800-1800 106 85 1900 0.9 2 0.28 0.2 -40 ... +130 1 SKKT 107/16 E 1600 119 85 1900 0.9 3.35 0.19 0.22 -40 ... +130 1 SKKT 107B16 E 1600 119 85 1900 0.9 3.35 0.19 0.22 -40 ... +130 1 800-1800 129 85 3200 0.85 2 0.2 0.13 -40 ... +125 2 SKKT 132 800-1800 137 85 4000 1 1.6 0.18 0.1 -40 ... +125 2 SKKT 132 H4 2000-2200 128 85 3800 1.1 2 0.17 0.1 -40 ... +125 2 SKKT 162 800-1800 156 85 5000 0.85 1.5 0.17 0.1 -40 ... +125 2 SKKT 162 H4 2000-2200 143 85 4800 0.95 2 0.16 0.1 -40 ... +125 2 SKKT 172 1400-1800 175 85 5000 0.83 1.3 0.155 0.1 -40 ... +125 2 SKKT 250 800-1800 250 85 8000 0.925 0.45 0.14 0.04 -40 ... +130 3 SKKT 273 1200-1800 273 85 8000 0.9 0.92 0.104 0.08 -40 ... +130 3 SKKT 280 H4 2000-2200 252 85 7500 0.9 0.75 0.11 0.04 -40 ... +125 3 SKKT 330 800-1800 305 85 8000 0.8 0.6 0.11 0.04 -40 ... +130 3 SKKT 323 1200-1600 320 85 8200 0.81 0.85 0.091 0.08 -40 ... +130 3 SKKT 460/16 E 1600 460 85 15500 0.88 0.45 0.072 0.02 -40 ... +130 5 SKKT 460/22 E H4 2200 460 85 15500 0.88 0.45 0.072 0.02 -40 ... +130 5 1200-1800 570 85 15500 0.78 0.32 0.069 0.02 -40 ... +135 5 SKKL 92 SKMT 92 800-1800 95 85 1750 0.9 2 0.28 0.2 -40 ... +125 1 SKKD 15 600-1600 14 85 280 0.85 15 2 0.2 -40 ... +125 0 SKKD 26 1200-1600 31 85 480 0.85 6 1 0.2 -40 ... +125 1 SKKD 46 400-1800 47 85 600 0.85 5 0.6 0.2 -40 ... +125 1 SKKD 81 400-1800 82 85 1750 0.85 1.8 0.4 0.2 -40 ... +125 1 SKKD 81 H4 2000-2200 82 85 1750 0.85 1.8 0.4 0.2 -40 ... +125 1 SKKD 100 400-1800 100 85 2000 0.85 1.3 0.35 0.2 -40 ... +125 1 SKKD 101/16 1600 134 85 2000 0.87 2.45 0.19 0.22 -40 ... +130 1 SKKD 152/16 H1 1600 171 85 4500 0.82 1.35 0.2 0.1 -40 ... +135 2 SKKD 162 800-2200 195 85 5000 0.85 1.2 0.18 0.1 -40 ... +135 2 SKKD 212 1200-1800 212 85 5500 0.75 1.05 0.18 0.1 -40 ... +135 2 SKKD 260 800-2200 260 85 10000 0.9 0.37 0.14 0.04 -40 ... +130 3 SKKD 353 1200-1800 350 85 9500 0.84 0.75 0.09 0.08 -40 ... +130 3 SKKD 380 800-2200 380 100 10000 0.8 0.35 0.11 0.04 -40 ... +150 3 SKKD 701 1200-2200 701 100 22500 0.7 0.28 0.069 0.02 -40 ... +160 5 SKKH 15 600-1600 13.5 85 280 1.1 20 1.6 0.2 -40 ... +125 0 SKKH 27 800-1800 25 85 480 0.9 12 0.9 0.2 -40 ... +125 1 SKKH 42 800-1800 40 85 850 1 4.5 0.65 0.2 -40 ... +125 1 SKKH 57 800-1800 50 85 1250 0.9 3.5 0.57 0.2 -40 ... +125 1 SKKH 57 H4 2000-2200 50 85 1250 0.9 3.5 0.57 0.2 -40 ... +125 1 1600 55 85 1200 1 4.8 0.47 0.22 -40 ... +130 1 SKKH 58/16 E SKKH 72 800-1800 70 85 1450 0.9 3.5 0.35 0.2 -40 ... +125 1 SKKH 72 H4 2000-2200 70 85 1450 0.9 3.5 0.35 0.2 -40 ... +125 1 SKKH 92 800-1800 95 85 1750 0.9 2 0.28 0.2 -40 ... +125 1 SKKH 106 800-1800 106 85 1900 0.9 2 0.28 0.2 -40 ... +130 1 1600 119 85 1900 0.9 3.35 0.19 0.22 -40 ... +130 1 SKKH 107/16 E SKKH 122 800-1800 129 85 3200 0.85 2 0.2 0.13 -40 ... +125 2 SKKH 132 800-1800 137 85 4000 1 1.6 0.18 0.1 -40 ... +125 2 SKKH 132 H4 2000-2200 128 85 3800 1.1 2 0.17 0.1 -40 ... +125 2 SKKH 162 800-1800 156 85 5000 0.85 1.5 0.17 0.1 -40 ... +125 2 SKKH 162 H4 2000-2200 143 85 4800 0.95 2 0.16 0.1 -40 ... +125 2 1600 175 85 5000 0.83 1.3 0.155 0.1 -40 ... +125 2 SKKH 172 SKKH 250 1200-1800 250 85 8000 0.925 0.45 0.14 0.04 -40 ... +130 3 SKKH 273 1200-1800 273 85 8000 0.9 0.92 0.104 0.08 -40 ... +130 3 SKKH 280 H4 2000-2200 252 85 7500 0.9 0.75 0.11 0.04 -40 ... +125 3 SKKH 323 1200-1600 320 85 8200 0.81 0.85 0.091 0.08 -40 ... +130 3 SKKH 330 800-1800 305 85 8000 0.8 0.6 0.11 0.04 -40 ... +130 3 SKKH 460 1600-2200 460 85 15500 0.88 0.45 0.072 0.02 -40 ... +130 5 SKKH 570 1600-1800 570 85 15500 0.78 0.32 0.069 0.02 -40 ... +135 5 SKKT 122 SKKT 570 1 Case Rth( j-c) cont. per chip °C 600-1600 Tj rT @ Tjmax A SKKT 15 Circuit SKET 741/22 E SKKE 1201/22 4 VT(TO) @ Tjmax SKET 400 V 4 ITSM IFSM @ Tjmax -40 ... +130 TC °C 0.02 ITAV IFAV @ TC K/W 0.09 VRRM VDRM K/W 0.55 Case mΩ 1.2 Tj V 8000 VT(TO) @ Tjmax A 85 ITSM IFSM @ Tjmax °C 295 TC A 800-2200 ITAV IFAV @ TC V SKET 330 VRRM VDRM Rth(c-s) per chip Type Rth( j-c) cont. per chip rT @ Tjmax Type Thyristor / Diode Modules / SEMIPACK CLASSES Thyristor / Diode Modules / SEMIPACK 2 3 4 5 6 7 8 9 10 11 108 SEMIKRON SEMIKRON 109 Cases LINES Thyristor / Diode Modules / SEMIPACK CLASSES Thyristor / Diode Modules / SEMIPACK Cases 4.04667 5.54518 SEMIPACK 0 SEMIPACK 1 16.6146 SEMIPACK 4 7.79915 SEMIPACK 5 1 2 3 4 4 5.51167 4.96463 2.45 7.03426 SEMIPACK 2 5 SEMIPACK 3 19.2917 10.6085 8.23859 SEMIPACK 6 6 7 8 5.41357 Dimensions in mm 9 2.3425 8.32936 Dimensions in mm 10 11 110 SEMIKRON SEMIKRON 111 4 1.2 -40 ... +150 2 0.05 -40 ... +150 2 2.75 0.11 0.05 -40 ... +150 2 SKKE 310F 1200 310 84 5500 1.2 1.9 0.08 0.05 -40 ... +150 2 SKKE 330F5) 1700 330 70 5200 1.5 1.9 0.079 - -40 ... +150 4 SKKE600F125) 1200 600 85 5800 1.2 1.9 0.062 - -40 ... +150 4 SKKQ 560 LINES CLASSES V A °C A V mΩ K/W °C 1400-1800 560 150 5200 0.9 0.9 0.106 150 1 Case 3600 0.05 0.08 Tjmax (for 20s) 43 0.2 1.2 Circuit Rth( j-r) cont. per chip 300 4.5 rT @ Tjmax =125°C 0.9 VT(TO) @ Tjmax =125°C 1.5 6000 °C ITSM @ Tj = 125°C 1800 109 K/W TC 82 290 K/W VRRM VDRM 120 mΩ Case V Tj 1200 A Rth(c-s) SKKE 301F °C Rth( j-c)per chip 600 A rT @ Tjmax 1700 SKKE 290F VT(TO) @ Tjmax SKKE 120F IFSM @ Tjmax V TC Type ITAV IFAV @ TC VRRM VDRM Type Thyristor Modules / SEMiSTART Ioverload W1C (for 20s) Thyristor / Diode Modules / SEMIPACK FAST Circuit 1 SKKQ 800 1400-1800 800 150 5200 0.9 0.8 0.106 150 2 SKKQ 1200 1400-1800 1225 150 8000 0.9 0.5 0.066 150 2 SKKQ 1500 1400-1800 1500 150 15000 0.85 0.3 0.037 150 2 SKKQ 3000 1400-1800 3080 150 25500 0.95 0.18 0.026 150 3 SKKD 40F 600-1000 40 80 940 1.2 4 0.7 0.2 -40 ... +125 1 SKKD 42F 1200-1400 42 85 1100 1 5 0.7 0.2 -40 ... +130 1 SKKD 60F 1700 60 83 900 1.5 9 0.4 0.1 -40 ... +150 2 SKKD 75F12 1200 75 55 900 1.2 11 0.4 0.1 -40 ... +150 2 SKKD 150F 1200 150 54 1800 1.2 5.5 0.2 0.1 -40 ... +150 2 Cases SKKD 170F 1200 170 85 2300 1.2 3.5 0.14 0.1 -40 ... +150 2 SKKD 205F 600 205 87 3000 0.9 2 0.16 0.1 -40 ... +150 2 SEMiSTART 1 SKMD 150F12 1200 150 54 1800 1.2 5.5 0.2 0.1 -40 ... +150 2 SKND 150F 1200 150 54 1800 1.2 5.5 0.2 0.1 -40 ... +150 2 SKND 205F 600 205 87 3000 0.9 2 0.16 0.1 -40 ... +150 2 2 3 4 Footnotes: 5) SEMIPACK Fast in SEMITRANS 4 case 5 Cases 2.45 2.10149 SEMIPACK 2 SEMIPACK Fast in SEMITRANS 4 6 7 8 9 2.3425 2.67463 Dimensions in mm 10 Dimensions in mm 11 112 SEMIKRON SEMIKRON 113 LINES Thyristor Modules / SEMiSTART Cases Cases SEMiSTART 2 SEMiSTART 3 CLASSES Thyristor Modules / SEMiSTART 1 2 3 4 4 5 6 7 Dimensions in mm 8 9 10 Dimensions in mm 11 114 SEMIKRON SEMIKRON 115 LINES Bridge Rectifier Modules CLASSES Bridge Rectifier Modules for Reliable Inverter Design SEMITOP ® / SEMIPONT ® / MiniSKiiP ® Bridge rectifiers are components which have every branch of a rectifier circuit in a single, compact case. Bridge rectifiers exist from a few amps to several hundred amps in different package types. rectifier with 600V up to 1800V brake chopper 1 SEMIKRON offers bridge rectifier modules in single phase or 3-phase topology with or without brake chopper. The bridge rectifier modules are available in different package like SEMiX, SEMITOP, SEMIPONT, Power Bridge and MiniSKiiP. 2 ID / IC in A ProductPage MiniSKiiP 118 SEMITOP 120 SEMIPONT 122 SEMiX 126 Power Bridge 0 10 20 30 40 50 75 100 200 300 400 500 3 SEMITOP ® / SEMIPONT ® / SEMiX ®/ Power Bridge three phase 400V up to 1800V 4 127 5 5 ID in A 0 10 20 30 40 50 75 100 200 300 400 500 6 SEMIPONT / SEMITOP / Power Bridge ® single phase ® 400V up to 1800V 7 8 ID in A 0 10 20 30 40 50 75 100 200 300 400 500 9 10 For detailed information please refer to data sheets. Further information: www.semikron.com/bridge-rectifier-modules 116 SEMIKRON 11 SEMIKRON 117 IGBT Diode Rectifier LINES Cases Module Eon Eoff Rth( j-s) IF@TS=25°C VF@Tj=25°C typ. Err Rth( j-s) Rth( j-s) IFSM@TS=25°C A V mJ mJ K/W A V mJ K/W K/W A 1 Rth(c-s) VCE(sat)@Tj=25°C typ. A Case ICnom MiniSKiiP II 2 IC@TS=25°C Type Bridge Rectifier Modules / MiniSKiiP CLASSES Bridge Rectifier Modules / MiniSKiiP K/W Circuit 1200V - IGBT3 (Trench) SKiiP 28ANB16V1 1000 83 1.70 13.1 13 0.4 118 1.60 11.2 0.55 0.7 1000 II 2 t.b.d SKiiP 39ANB16V1 1600 124 1.70 19.9 17.2 0.3 167 1.50 16.2 0.4 0.5 1600 II 3 t.b.d SKiiP 28AHB16V1 1000 82 1.70 14.4 13.3 0.4 118 1.60 10.8 0.55 0.7 1000 II 2 t.b.d SKiiP 39AHB16V1 1250 121 1.70 19.9 17.3 0.3 167 1.50 16.2 0.4 0.5 1250 II 3 t.b.d 2 MiniSKiiP II 3 3 4 1700V - IGBT3 (Trench) SKiiP 28ANB18V3 2) 1000 98 2.00 23 32.7 0.33 119 1.76 26.4 0.58 0.64 1000 II 2 t.b.d 5 5 Dimensions in mm Footnotes: 2) In production new 6 7 8 9 10 11 118 SEMIKRON SEMIKRON 119 Type LINES Bridge Rectifier Modules / SEMITOP CLASSES Bridge Rectifier Modules / SEMITOP Cases 6.74625 5.27667 ID @ TS TS ITSM IFSM@Tjmax VT(TO)@Tjmax rT@Tjmax Rth( j-s) per chip Tj V A °C A V mΩ K/W °C SEMITOP 2 Press-Fit Case VRRM VDRM SEMITOP 2 1 Circuit 1 and 3 phase SK 50 B 06 UF 2) SK 50 B 600 46 80 400 0.8 11.00 0.45 -40 ... +150 2 800-1600 51 80 270 0.8 13.00 1.7 -40 ... +150 2 SK 55 B 06 F 600 54 80 440 0.9 16.00 1.2 -40 ... +150 2 SK 55 B 12 F 1200 57 80 550 1.2 22.00 0.9 -40 ... +150 2 SK 70 B 800-1600 68 80 560 0.8 11.00 1.2 -40 ... +150 2 SK 100 B 2) 800-1600 100 80 890 0.83 3.90 1 -40 ... +150 2 SK 40 DT 800-1600 42 80 280 1.1 20.00 1.7 -40 ... +125 3 SK 70 DT 800-1600 68 80 380 1 10.00 1.2 -40 ... +125 3 2 5.355 3.72 8.4175 5.46 SEMITOP 3 3 SEMITOP 4 4 5 SK 55 D 800-1600 55 80 200 0.8 13.00 2.15 -40 ... +150 SK 70 D 800-1600 70 80 270 0.8 13.00 1.7 -40 ... +150 2 1200 80 80 550 1.2 22.00 0.9 -40 ... +150 3 800-1600 95 80 560 0.8 11.00 1.2 -40 ... +150 2 1600 95 80 560 0.8 11.00 1.2 -40 ... +150 2p SK 40 DH 800-1600 42 80 270 1.1 20.00 1.7 -40 ... +150 3 SK 70 DH 800-1600 68 80 270 1 10.00 1.2 -40 ... +125 3 SK 80 D 12F SK 95 D SK 95 D 16p 1) 2 5 6 5.5475 5.46 Dimensions in mm 7 SK 55 DGL 126 1200 55 80 370 0.8 13.00 2 -40 ... +150 3 SK 95 DGL 126 2) 1600 96 80 700 0.8 11.00 1.2 -40 ... +150 3 8 SK 170 DHL 126 1) 1200 170 70 1000 0.8 7.00 0.51 -40 ... +150 4 SK 200 DHL 066 1) 600 210 70 1250 0.8 4.00 0.52 -40 ... +150 4 9 Footnotes: 1) Sample status / 2) In production new 10 11 120 SEMIKRON SEMIKRON 121 LINES CLASSES SKB 52 400-1800 50 99 425 0.85 8.0 1.5 -40 ... +150 3 SKDT 60 SKB 60 400-1600 60 88 850 0.85 5.0 1 -40 ... +125 2 SKDT 115 3) SKB 72 400-1800 70 101 640 0.85 5.0 1.1 -40 ... +150 3 SKDT 145 1200-1600 Circuit 1 and 3 phase V A °C 400-1400 60 86 1200-1600 110 80 145 80 A V 400 1 950 1.1 1250 0.9 mΩ K/W °C 16.0 1 -40 ... +125 2 6.0 0.84 -40 ... +125 5 5.0 0.6 -40 ... +125 5 1 Case °C Tj K/W Rth( j-c) cont. per chip mΩ rT@Tjmax V VT(TO)@Tjmax Tj A TC Rth( j-c) cont. per chip °C ID @ TC rT@Tjmax A VRRM VDRM VT(TO)@Tjmax V Case ITSM IFSM@Tjmax TC Type ID @ TC VRRM VDRM Type Bridge Rectifier Modules / SEMIPONT ITSM IFSM@Tjmax Bridge Rectifier Modules / SEMIPONT Circuit 1 and 3 phase 2 3 SKBH 28 5 SKBZ 28 600-1400 400-1400 28 28 89 89 280 280 1 1 16.0 16.0 1.8 1.8 -40 ... +125 -40 ... +125 1 1 SKD 31 200-1600 31 100 320 0.85 12.0 2 -40 ... +125 1 SKD 60 400-1600 60 102 850 0.85 5.0 1 -40 ... +125 2 SKD 62 400-1800 60 110 425 0.85 8.0 1.5 -40 ... +150 3 SKD 82 400-1800 80 110 640 0.85 5.0 1.1 -40 ... +150 3 SKD 100 400-1600 100 93 1000 0.85 5.0 0.85 -40 ... +125 2 SKD 110 800-1800 110 100 1000 0.85 4.0 0.9 -40 ... +150 4 SKD 115 1200-1800 110 85 1150 0.8 7.0 1 -40 ... +150 5 SKD 145 1200-1800 145 85 1700 0.8 4.0 0.8 -40 ... +150 5 SKD 160 800-1800 205 85 1500 0.85 3.0 0.65 -40 ... +150 4 SKD 210 900-1800 207 99 1600 0.85 3.0 0.5 -40 ... +150 4 SKDH 100 800-1400 100 84 850 1 4.5 0.85 -40 ... +125 2 SKDH 115 1200-1600 110 80 950 1.1 6.0 0.84 -40 ... +125 5 SKDH 145 1200-1600 145 80 1250 0.9 5.0 0.63 -40 ... +125 5 4 5 6 SKBT 28 600-1400 28 89 280 1 16.0 1.8 -40 ... +125 1 SKBT 40 800-1400 40 92 400 1 16.0 1 -40 ... +125 2 SKCH 28 400-1400 28 89 280 1 16.0 1.8 -40 ... +125 1 SKCH 40 400-1600 40 92 400 1 16.0 1 -40 ... +125 2 3 phase with brake chopper SKD 146/..-L105 2) 1200-1600 140 85 1250 0.8 4.0 0.8 -40 ... +125 SKD146/..-L140T4 2) 1200-1600 140 85 1250 0.8 4.0 0.8 -40 ... +125 6 SKD 116/18-L 75 1800 110 85 1050 0.8 7.0 0.8 -40 ... +125 6 6 SKD 116/..-L105 2) 1200-1600 110 85 1050 0.8 7.0 1 -40 ... +125 6 SKD 116/..-L140 2) 1200-1600 110 85 1050 0.8 7.0 1 -40 ... +125 6 SKDH116/..L105 2) 1200-1600 110 85 1000 0.8 7.0 1 -40 ... +125 6 7 8 SKDH116/..L140 2) 1200-1600 110 85 1000 0.8 7.0 1 -40 ... +125 6 SKDH146/..-L105 2) 1200-1600 140 85 1250 0.8 4.0 0.8 -40 ... +125 6 SKDH146/..-L140 2) 1200-1600 140 85 1250 0.8 4.0 0.8 -40 ... +125 6 9 Footnotes: 2) In production new / 3) Not for new designs Footnotes: 2) In production new / 3) Not for new designs 10 11 122 SEMIKRON SEMIKRON 123 Cases LINES Bridge Rectifier Modules / SEMIPONT CLASSES Bridge Rectifier Modules / SEMIPONT Cases 40.2727 2.66667 SEMIPONT 1 SEMIPONT 2 SEMIPONT 5 1 2 3 4 5 47.2163 3.84667 2.66667 2.66667 SEMIPONT 3 SEMIPONT 4 5 SEMIPONT 6 6 7 8 9 4.14333 3.57333 Dimensions in mm 10 Dimensions in mm 11 124 SEMIKRON SEMIKRON 125 SEMiX251D12Fs 1200 256 85 1330 1.20 7 0.26 0.04 -40 ... +150 13 SEMiX291D16s 1600 232 85 1380 0.83 4.6 0.45 0.04 -40 ... +150 13 SEMiX341D16s 1600 348 85 2000 0.9 2.7 0.22 0.04 -40 ... +130 13 SEMiX501D17Fs 1700 494 85 2140 1.10 2.7 0.165 0.04 -40 ... +150 13 SEMiX241DH16s 1600 240 85 1900 0.85 4 0.32 0.04 -40 ... +130 13 V A °C A V mΩ K/W °C SKB 25 100-1600 17 75 320 0.85 12.00 8.6 -40 ... +150 G 10b, G 11b SKB 26 200-1600 18 75 320 0.85 12.00 8.2 -40 ... +150 G 50a SKB 30 200-1600 30 94 320 0.85 12.00 3.2 -40 ... +150 G 12, G 13 Circuit 3 phase LINES 1 Case °C Tj K/W Rth( j-s) cont. per chip K/W rT@Tjmax Tj mΩ VT(TO)@Tjmax Rth(c-s) V IFSM@Tjmax Rth( j-c) per chip A TC/S rT@Tjmax °C ID @ TC/S VT(TO)@Tjmax A VRRM VDRM ITSM IFSM@Tjmax V Case TC Type ID @ TC VRRM VDRM Type Bridge Rectifier Modules / Power Bridge CLASSES Bridge Rectifier Modules / SEMiX Circuit 1 phase 2 3 3 phase Cases 5 SEMiX 13 DBI 6 P2) 200-2200 9 113 200 0.8 24.00 12.9 -40 ... +150 DBI 25 P2) 200-2200 27 32 370 0.85 9.00 11.1 -40 ... +150 DBI P SKD 25 200-1600 20 73 320 0.85 12.00 11.4 -40 ... +150 G 10b, G 11b SKD 30 200-1600 30 98 320 0.85 12.00 4.8 -40 ... +150 G 12, G 13 DBI P SKD 33 400-1800 33 110 240 0.8 18.00 2.5 -40 ... +150 G55 SKD 51 400-1800 50 127 700 0.8 8.50 1.2 -40 ... +150 G51 SKD 53 400-1800 53 100 270 0.8 13.00 1.9 -40 ... +150 G55 SKD 83 400-1800 83 95 560 0.8 7.50 1.4 -40 ... +150 G55 4 5 Footnotes: 2) In production new 6 7 8 9 10 Dimensions in mm 11 126 SEMIKRON SEMIKRON 127 LINES Bridge Rectifier Modules / Power Bridge Cases Cases DBI P G 10b, G 11b CLASSES Bridge Rectifier Modules / Power Bridge 1 2 3 4 5 5 G 12, G 13 G 50a 6 7 8 9 Dimensions in mm 10 Dimensions in mm 11 128 SEMIKRON SEMIKRON 129 LINES CLASSES Bridge Rectifier Modules / Power Bridge Cases G 51 1 2 3 4 5 5 G 55 6 7 8 9 Dimensions in mm 10 11 130 SEMIKRON SEMIKRON 131 LINES IPM CLASSES IPM SEMIKRON Offers Highly Integrated IPMs SKiiP ® 3 The SKiiP IPMs represent the benchmark for regenerative inverter solutions up to 5MW. 1200V up to 1700V 6-pack 1 half bridge 2 ICnom in A ProductPage SKiiP 3/4 134 SKiiP Accessories 143 SKiiP ® 4 0 50 100 600 1200 1800 24003600 1200V up to 1700V 3 half bridge 4 ICnom in A 0 50 100 600 1200 1800 24003600 6 5 6 7 8 9 10 For detailed information please refer to data sheets. Further information: www.semikron.com/ipm 132 SEMIKRON 11 SEMIKRON 133 Circuit 1200V - IGBT 3 (Trench) - SKiiP3 6 LINES A V mJ A V mJ CLASSES 1 Case A Options F=F-Option U=U-Option S=SKiFace Adapter Err mJ VF @ Tj = 25°C typ. V IF@ TS = 25°C A Module Eon + Eoff mJ Diode VCE(sat) @ Tj = 25°C typ. Err V IGBT Inom VF @ Tj = 25°C typ. A Case IF@ TS = 25°C A Type Options F=F-Option U=U-Option S=SKiFace Adapter Eon + Eoff Module VCE(sat) @ Tj = 25°C typ. Diode Inom IGBT IC @ TS= 25°C Type IPM / SKiiP IC @ TS= 25°C IPM / SKiiP Circuit 1700V - IGBT 3 (Trench) - SKiiP3 SKiiP 603 GD123-3DUL V3 627 600 1.7 195 508 1.50 28 - S33 SKiiP 1013 GB172-2DL V3 1072 1000 1.9 575 879 2.00 86 F S23 SKiiP 603 GD123-3DUW V3 627 600 1.7 195 508 1.50 28 - S33 SKiiP 1013 GB172-2DW V3 1072 1000 1.9 575 879 2.00 86 F S23 SKiiP 613 GD123-3DUL V3 577 600 1.7 195 466 1.50 28 - S33 SKiiP 1203 GB172-2DL V3 1159 1200 1.9 575 961 2.00 86 F S23 SKiiP 613 GD123-3DUW V3 577 600 1.7 195 466 1.50 28 - S33 SKiiP 1203 GB172-2DW V3 1159 1200 1.9 575 961 2.00 86 F S23 SKiiP 1513 GB172-3DL V3 1589 1500 1.9 863 1336 2.00 128 F,U S33 SKiiP 1513 GB172-3DW V3 1589 1500 1.9 863 1336 2.00 128 F,U S33 SKiiP 1803 GB172-3DL V3 1744 1800 1.9 863 1454 2.00 128 F,U S33 SKiiP 1803 GB172-3DW V3 1744 1800 1.9 863 1454 2.00 128 F,U S33 SKiiP 2013 GB172-4DL V3 2102 2000 1.9 1150 1758 2.00 171 F,U S43 SKiiP 2013 GB172-4DW V3 2102 2000 1.9 1150 1758 2.00 171 F,U S43 SKiiP 2403 GB172-4DL V3 2282 2400 1.9 1150 1921 2.00 171 F,U S43 SKiiP 2403 GB172-4DW V3 2282 2400 1.9 1150 1921 2.00 171 F,U S43 SKiiP 1814 GB17E4-3DUL 2547 1800 2.12 2130 1771 2.02 498 F,S S34 SKiiP 1814 GB17E4-3DUW 2547 1800 2.12 2130 1771 2.02 498 F,S S34 SKiiP 2414 GB17E4-4DUL 2) 3385 2400 2.12 2840 2362 2.02 664 F,S S44 SKiiP 2414 GB17E4-4DUW 2) 3385 2400 2.12 2840 2362 2.02 664 F,S S44 SKiiP 3614 GB17E4-6DUL 5078 3600 2.12 6840 3547 2.02 996 F,S S64 SKiiP 3614 GB17E4-6DUW 5078 3600 2.12 6840 3547 2.02 996 F,S S64 SKiiP 3614 GB17E4-6DULR 2) 5078 3600 2.12 6840 3547 2.02 996 F,S S64 SKiiP 1213 GB123-2DL V3 1145 1200 1.7 390 925 1.50 56 F S23 SKiiP 1213 GB123-2DW V3 1145 1200 1.7 390 925 1.50 56 F S23 SKiiP 1813 GB123-3DL V3 1695 1800 1.7 585 1411 1.50 84 F,U S33 SKiiP 1813 GB123-3DW V3 1695 1800 1.7 585 1411 1.50 84 F,U S33 SKiiP 2413 GB123-4DL V3 2280 2400 1.7 780 1807 1.50 112 F,U S43 SKiiP 2413 GB123-4DW V3 2280 2400 1.7 780 1807 1.50 112 F,U S43 2 3 4 5 1700V - IGBT 4 (Trench) - SKiiP4 6 1200V - IGBT 4 (Trench) - SKiiP4 SKiiP 1814 GB12E4-3DUL 2345 1800 2.01 1260 1776 2.33 150 F,S S34 SKiiP 1814 GB12E4-3DUW 2345 1800 2.01 1260 1776 2.33 150 F,S S34 SKiiP 1814 GB12E4-3DUSL 2345 1800 2.01 1260 1776 2.33 150 F,S S34 SKiiP 2414 GB12E4-4DUL 3109 2400 2.01 1680 2369 2.33 200 F,S S44 SKiiP 2414 GB12E4-4DUW 3109 2400 2.01 1680 2369 2.33 200 F,S S44 SKiiP 2414 GB12E4-4DUSL 3109 2400 2.01 1680 2369 2.33 200 F,S S44 SKiiP 3614 GB12E4-6DUL 4664 3600 2.01 2520 3558 2.33 300 F,S S64 SKiiP 3614 GB12E4-6DUW 4664 3600 2.01 2520 3558 2.33 300 F,S S64 SKiiP 3614 GB12E4-6DULR 4664 3600 2.01 2520 3558 2.33 300 F,S S64 SKiiP 3614 GB12E4-6DUSL 4664 3600 2.01 2520 3558 2.33 300 F,S S64 7 8 Footnotes: 2) In production new 9 1700V - IGBT 3 (Trench) - SKiiP3 SKiiP 513 GD172-3DUL V3 540 500 1.9 288 438 2.00 43 - S33 SKiiP 513 GD172-3DUW V3 540 500 1.9 288 438 2.00 43 - S33 SKiiP 603 GD172-3DUL V3 587 570 1.9 288 476 2.00 43 - S33 SKiiP 603 GD172-3DUW V3 570 570 1.9 288 476 2.00 43 - S33 10 Footnotes: 2) In production new 11 134 SEMIKRON SEMIKRON 135 LINES IPM / SKiiP SKiiP 3 SKiiP 3 Case S 23 mounted on P3016 heat sink Case S 33 mounted on P3016 heat sink CLASSES IPM / SKiiP 1 2 3 4 Weight without heat sink: 1,7 kg Weight without heat sink: 2,4 kg P3016: 4,4 kg P3016: 6,2 kg Case S 23 mounted on liquid cooled heat sink NWK 40 5 Case S 33 mounted on liquid cooled heat sink NWK 40 6 6 7 8 9 10 NWK 40: Dimensions in mm 2,8 kg NWK 40: 5,2 kg Dimensions in mm 11 136 SEMIKRON SEMIKRON 137 LINES IPM / SKiiP SKiiP 3 SKiiP 4 Case S 43 mounted on P3016 heat sink Case S 34 mounted on P4016 heat sink CLASSES IPM / SKiiP 1 2 3 4 Weight without heat sink: 3,1 kg P3016: 8,0 kg Case S 43 mounted on liquid cooled heat sink NWK 40 5 Weight without heat sink: 2,48 kg P4016: 5,9 kg Case S 34 mounted on liquid cooled heat sink NHC 6 6 7 8 9 10 NWK 40: 6,2 kg NHC: 3,49 kg Dimensions in mm Dimensions in mm 11 138 SEMIKRON SEMIKRON 139 LINES IPM / SKiiP SKiiP 4 SKiiP 4 Case S 44 mounted on P4016 heat sink Case S 64 mounted on P4016 heat sink CLASSES IPM / SKiiP 1 2 3 4 5 Weight without heat sink: 3,22 kg Weight without heat sink: 4,84 kg P4016: 7,55 kg P4016: 9,9 kg Case S 44 mounted on liquid cooled heat sink NHC Case S 64 mounted on liquid cooled heat sink NHC 6 6 7 8 9 10 NHC: 4,25 kg Dimensions in mm NHC: 5,77 kg Dimensions in mm 11 140 SEMIKRON SEMIKRON 141 LINES IPM / SKiiP Accessories SKiiP 4 Type Case S 64 mounted on P4016 heat sink with 90° rotated fins F-Option SKiiP3 SKiiP3 F-Option CLASSES IPM / SKiiP Fiber optic control board for SKiiP3 F-Option SKiiP4 SKiiP4 F-Option Fiber optic control board for SKiiP4 SKiiP4 F-Option with D-Sub connector Fiber optic control board for SKiiP4 1 SKiiP3 Parallel Board SKiiP3 Parallel Board 4-fold Board for paralleling of 4 SKiiP3, F-Option usage possible SKiiP3 Parallel Board 3-fold Board for paralleling of 3 SKiiP3, F-Option usage possible SKiiP3 Parallel Board 2-fold Board for paralleling of 2 SKiiP3, F-Option usage possible 2 SKiiP4 Parallel Board SKiiP4 Parallel Board 4-fold without F-Option Board for paralleling of 4 SKiiP4, F-Option usage not possible SKiiP4 Parallel Board 4-fold F-Option Board for paralleling of 4 SKiiP4, F-Option usage possible SKiiP4 Parallel Board 3-fold without F-Option Board for paralleling of 3 SKiiP4, F-Option usage not possible SKiiP4 Parallel Board 3-fold F-Option Board for paralleling of 3 SKiiP4, F-Option usage possible SKiiP4 Parallel Board 2-fold without F-Option Board for paralleling of 2 SKiiP4, F-Option usage not possible SKiiP4 Parallel Board 2-fold F-Option Board for paralleling of 2 SKiiP4, F-Option usage possible 3 SKiFace Adapter Board Weight without heat sink: 4,84 kg P4016: 9,9 kg SKiiP4 SKiFace Adapter UZK Adapter board to connect SKiiP4 to SKiiP3 controller with DC-Link voltage measurement function SKiiP4 SKiFace Adapter Temp Adapter board to connect SKiiP4 to SKiiP3 controller with temperatur measurement function 4 5 Dimensions in mm 6 6 7 8 9 10 11 142 SEMIKRON SEMIKRON 143 SEMIKRON offers two different IGBT driver families for each application. Driver cores of the SKHI and SKYPER family can be optimized by using adapterboards to each module type. Driver like the SKYPER Prime offer a fully qualified Plug & Play solution saving time and costs in the application. The SKYPER family with 1W to 10W output power per channel, cover the whole range between 30kW and 2MW inverters. The high integration of SEMIKRON’s new ASIC chipset provide for safe IGBT gate control over the whole lifecycle. Short circuits are managed very fast by separate error channels. SoftOff and over voltage feedback avoid dangerous over voltages. The mixed signal ASICs guarantee lowest tolerances over the full temperature range. MLI or paralleled IGBT topologies are managed by the adjustable error handling. With an optimized interface and the adjustable filter setting the SKYPER family operates safely in noisy environments. The SEMIKRON’s adapter boards allow to build up fast a broad range of inverter platforms based on various different types of IGBT modules. SKYPER ® 600V up to 1700V Driver 1 2 Pout in W SKYPER ® & SKHI 0 2 4 8 16 32 900V up to 1700V 3 Driver Cores 4 Pout in W ProductPage SKYPER & SKHI LINES IGBT Driver CLASSES IGBT Driver SEMIKRON IGBT Driver Family 146 SKYPER ® & SKHI 0 2 4 8 16 32 5 1200V up to 1700V Adapterboards 6 7 7 Pout in W 0 2 4 8 16 32 8 9 10 For detailed information please refer to data sheets. Further information: www.semikron.com/driver 144 SEMIKRON 11 SEMIKRON 145 LINES VCE VG(on) VG(off) IoutPEAK Qout/pulse fmax VisolIO Channels Type CLASSES IGBT Driver V V V A µC kHz kV 1 Driver SKHI 10/12 R 1 1200 15 -8 8 9.6 100 2500 SKHI 10/17 R 1 1700 15 -8 8 9.6 100 4000 SKHI 23/12 R 2 1200 15 -8 8 4.8 100 2500 SKHI 23/17 R 2 1700 15 -8 8 4.8 100 4000 SKHIT 01 R7) 3 528 - - - - 10 2500 SKYPER 12 press-fit 300A 2 1200 14.6 -9 15 8 20 4000 SKYPER 12 press-fit 450A 2 1200 14.6 -9 15 8 13 4000 SKYPER 12 press-fit 600A 2 1200 14.6 -9 15 8 10 4000 SKYPER 12 press-fit C 300A 2 1200 14.6 -9 15 8 20 4000 SKYPER 12 press-fit C 450A 2 1200 14.6 -9 15 8 13 4000 SKYPER 12 press-fit C 600A 2 1200 14.6 -9 15 8 10 4000 SKYPER PRIME 1000A / 1700V ST10 / PP 2) 2 1700 15 -8 15 10 10 5000 SKYPER PRIME 1400A / 1700V ST10 2) 2 1700 15 -8 15 10 10 5000 SKYPER PRIME 1400A / 1700V PP 2) 2 1700 15 -8 15 13.5 7.4 5000 2 3 Driver Core SKHI 21A R8) 2 1200 15 0 8 4 50 2500 SKHI 22 A/B H4 R 2 1700 15 -7 8 4 50 4000 SKHI 22 A/B R 2 1200 15 -7 8 4 50 2500 SKHI 24 R 2 1700 15 -8 15 5 50 4000 SKYPER 32 R 2 1700 15 -7 15 2.5 50 4000 SKYPER 32 PRO R 2 1700 15 -7 15 6.3 50 4000 SKYPER 42 R 2 1700 15 -8 30 50 100 4000 SKYPER 42 No TD 2 1700 15 -8 30 50 100 4000 SKYPER 42 R/02 (Coated type) 2) 2 1700 15 -8 30 50 100 4000 SKYPER 42 LJ R 2 1700 14.8 -8 20 20 100 4000 SKHI 61 R 6 900 14.9 -6.5 2 1 50 2500 SKHI 71 R 7 900 14.9 -6.5 2 1 50 2500 Board 1 SKYPER 32 R 2 1700 15 -7 15 2.5 50 4000 Board 1 SKYPER 32PRO R 2 1700 15 -7 15 6.3 50 4000 Board 2 // 4S SKYPER 42 R 2 1200 15 -8 30 50 100 4000 Board 2 generic SKYPER 42 R 2 1700 15 -8 30 50 100 4000 Board 2//3S SKYPER 42 R 2 1700 15 -8 30 50 100 4000 Board 2S SKYPER 32 PRO R Gold 2 1700 15 -7 15 6.3 50 4000 4 5 6 Adapter Board 7 Board 2S SKYPER 32 R Gold 2 1700 15 -7 15 2.5 50 4000 Board 3S SKYPER 32 PRO R Gold 2) 2 1700 15 -7 15 6.3 50 4000 Board 3S SKYPER 32 R Gold 2 1700 15 -7 15 2.5 50 4000 Board 4S SKYPER 32 PRO R Gold 2 1700 15 -7 15 6.3 50 4000 Board 4S SKYPER 32 R Gold 2 1700 15 -7 15 2.5 50 4000 Board 63 GB SKYPER 42 R 2 1700 15 -8 30 50 100 4000 Board 93 GB SKYPER 42 R 2) 2 1700 15 -8 30 50 100 4000 7 8 Footnotes: 2) In production new / 7) Thyristor Driver / 8) MOSFET Driver 9 10 11 146 SEMIKRON SEMIKRON 147 LINES Stacks CLASSES Stacks Fully Qualified Inverter Assemblies Tailored to Your Specific Needs Water cooled SEMISTACK ® RE Synchronus wind generators In addition to standard semiconductor components, SEMIKRON has developed a full range of power converter assemblies. 1 Double-fed wind generators Solar inverters Stack center application engineers are available to offer specific power solutions by adapting present platforms or by designing fully customized converters. Power in kW 5075100 500 1000 2000 3000 4000 5000 6000 2 SKiiPRACK ® Synchronus wind generators ProductPage Water cooled SEMISTACK RE 150 SKiiPRACK 152 Air cooled 3 Double-fed wind generators High power AC drives Power in kW 5075100 500 1000 2000 3000 4000 5000 6000 Air cooled SEMIKUBE153 SEMIKUBE ® SEMIKUBE SlimLine 154 Solar inverters SEMISTACK CLASSICS 155 Pump and compressor drives 4 5 Power in kW 5075100 500 1000 2000 3000 4000 5000 6000 SEMIKUBE ® SlimLine 6 Solar inverters AC drives and servos Power in kW 5075100 500 1000 2000 3000 4000 5000 6000 7 SEMISTACK ® CLASSICS 8 B6U non isolated 3-phase uncontrolled rectifier isolated B6HK non isolated 3-phase half controlled rectifier isolated B6C non isolated 3-phase fully controlled rectifier isolated 8 9 10 For detailed information please refer to data sheets. Further information: www.semikron.com/stacks 148 SEMIKRON W3C non isolated 3-phase reverse parallel isolated thyristor converter in kW 0200 400 600 800 1000 2000 SEMIKRON 3000 149 11 LINES Cases Isolated V V A SKS B2 120 GDD 69/11 - A11 MA PB 690 1100 1200 SKiiP 3 Water/Glycol - yes SKS B2 140 GDD 69/12 U - A11 MA PB 690 1250 1400 SKiiP 4 Water/Glycol - yes Cooling Current Heatsink profile SKS B1 090 GD 69/11 - MA PB VDC Component Family VAC Type Stacks / SEMISTACK RE CLASSES Stacks / SEMISTACK RE 1 Circuit 4-Quadrant converter 2 3-phase inverter SKS B1 090 GD 69/11 - MA PB 690 1100 900 SKiiP 3 Water/Glycol - SKS B2 100 GD 69/11 - MA PB 690 1100 1000 SKiiP 3 Water/Glycol - yes SKS B2 120 GD 69/11 - MA PB 690 1100 1200 SKiiP 3 Water/Glycol - yes SKS B2 140 GD 69/12 U - MA PB 690 1250 1400 SKiiP 4 Water/Glycol - yes yes 3 4 5 SKS B2 100 GD 69/11 - MA PB, SKS B2 120 GD 69/11 - MA PB, and SKS B2 140 GD 69/12 - MA PB 6 7 8 8 9 10 Dimensions in mm 11 150 SEMIKRON SEMIKRON 151 1200 SKiiP 3 Water/Glycol - yes SKS C 240 GDD 69/11 - A6A MA B1C 690 1100 2400 SKiiP 3 Water/Glycol - yes LINES CLASSES V A IGD-1-424-P1N4-DL-FA 460 750 200 SEMITRANS Forced-air cooled PX 308 IGD-2-424-P1N6-DH-FA 460 750 350 SEMITRANS Forced-air cooled PX 308 yes IGD-4-424-P1F7-BL-FA 460 750 750 SEMITRANS Forced-air cooled PX 308 yes 1 Circuit 3-phase inverter Cases 2.86 Isolated 1100 4-Quadrant converter Heatsink profile 690 V Circuit Cooling SKS C 120 GDD 69/11 - A3A WA B1B Current A VDC V VAC Isolated Current V Cooling VDC Heatsink profile Type Component Family VAC Type Stacks / SEMIKUBE Component Family Stacks / SKiiPRACK yes IGD-8-326-E1F12-BH-FA 460 750 1230 SEMITRANS Forced-air cooled PX 308 yes IGD-8-426-E1F12-BH-FA 460 750 1470 SEMITRANS Forced-air cooled PX 308 yes IGD-8-424-P1F9-BH-FA 460 750 1470 SEMITRANS Forced-air cooled PX 308 yes IGD-8-474-P1F9-BI-FA 1) 690 1250 1300 SEMITRANS Forced-air cooled PX 308 yes IGDD6-1-326-D1616-E1N6-DL-FA 460 750 150 SEMITRANS/SEMIPACK Forced-air cooled PX 308 yes IGDD6-1-426-D1616-E1N6-DL-FA 460 750 180 SEMITRANS/SEMIPACK Forced-air cooled PX 308 yes 2 4.49803 SKiiPRACK basic stack element, the CELL 3-Cell vertical integration 3-phase rectifier and inverter IGDD6-2-326-D1616-E1F12-DH-FA 460 750 280 SEMITRANS/SEMIPACK Forced-air cooled PX 308 yes IGDD6-2-426-D1616-E1F12-DH-FA 460 750 330 SEMITRANS/SEMIPACK Forced-air cooled PX 308 yes IGDD6-4-326-D3816-E1F12-BL-FA 460 750 570 SEMITRANS/SEMIPACK Forced-air cooled PX 308 yes IGDD6-4-426-D3816-E1F12-BL-FA 460 750 680 SEMITRANS/SEMIPACK Forced-air cooled PX 308 yes 3 4 Footnotes: 1) Sample status Cases 2.06333 Frames 6.63333 Size 1 5 6 7 2.64333 8 7.87402 8 Dimensions in mm 1.76667 5.82667 Dimensions in mm 9 10 11 152 SEMIKRON SEMIKRON 153 LINES CLASSES Isolated A Heatsink profile V Component Family DC Current V A SKS SL 20 GD 50/10 - E4 P1 G 2) 500 1000 230 SEMITRANS Forced-air cooled SL20 - SKS 88N B6C 60 V16 500 670 88 SEMIPACK 1 Natural cooled P3/180 yes SKS SL 40 GD 50/10 - E4 P1 G 2) 500 1000 440 SEMITRANS Forced-air cooled SL40 - SKS 88N B6C 60 V16 SU 500 670 88 SEMIPACK 1 Natural cooled P3/180 yes Circuit 3-phase inverter Cooling V Frame V Cooling Current VDC VDC Isolated Type Component Family VAC Type Stacks / SEMISTACK CLASSICS VAC Stacks / SEMIKUBE SlimLine 3-phase fully-controlled thyristor bridge rectifier SKS SL 80 GD 50/10 - E4 P1 G 2) 500 1000 750 SEMITRANS Forced-air cooled SL80 - SKS 180F B6C 120 V16 500 670 180 SEMIPACK 1 Forced-air cooled P3/180 yes SKS SL 150 GD 50/10 - E4 P1 G 2) 500 1000 1500 SEMITRANS Forced-air cooled SL150 - SKS 180F B6C 120 V16 SU 500 670 180 SEMIPACK 1 Forced-air cooled P3/180 yes SKS SL 20 GD 50/10 - E4 P1 AF 2) 500 1000 230 SEMITRANS Forced-air cooled SL20 - SKS 215N B6C 145 V16 500 670 215 Stud devices Natural cooled P1/150 no SKS SL 40 GD 50/10 - E4 P1 AF 2) 500 1000 440 SEMITRANS Forced-air cooled SL40 - SKS 215N B6C 145 V16 SU 500 670 215 Stud devices Natural cooled P1/150 no SKS SL 80 GD 50/10 - E4 P1 AF 2) 500 1000 750 SEMITRANS Forced-air cooled SL80 - SKS 250F B6C 170 V16 500 670 250 SEMIPACK 2 Forced-air cooled P3/265 yes SKS SL 150 GD 50/10 - E4 P1 AF 2) 500 1000 1500 SEMITRANS Forced-air cooled SL150 - SKS 250F B6C 170 V16 SU 500 670 250 SEMIPACK 2 Forced-air cooled P3/265 yes SKS 355N B6C 240 V16 500 670 355 Stud devices Natural cooled P1/200 no SKS 355N B6C 240 V16 SU 500 670 355 Stud devices Natural cooled P1/200 no SKS 365F B6C 245 V16 500 670 365 SEMIPACK 2 Forced-air cooled P16/200 yes SKS 365F B6C 245 V16 SU 500 670 365 SEMIPACK 2 Forced-air cooled P16/200 yes SKS 570F B6C 380 V16 500 670 570 SEMIPACK 3 Forced-air cooled P16/200 yes SKS 570F B6C 380 V16 SU 500 670 570 SEMIPACK 3 Forced-air cooled P16/200 yes SKS 640F B6C 430 V16 500 670 640 SEMIPACK 3 Forced-air cooled P16/200 yes SKS 640F B6C 430 V16 SU 500 670 640 SEMIPACK 3 Forced-air cooled P16/200 yes SKS 700N B6C 470 V16 500 670 700 Capsules Natural cooled P11/415 no SKS 700N B6C 470 V16 SU 500 670 700 Capsules Natural cooled P11/415 no SKS 845N B6C 570 V16 500 670 845 Capsules Natural cooled U3/515 no SKS 845N B6C 570 V16 SU 500 670 845 Capsules Natural cooled U3/515 no SKS 970F B6C 650 V16 500 670 970 SEMIPACK 5 Forced-air cooled P16/300 yes SKS 970F B6C 650 V16 SU 500 670 970 SEMIPACK 5 Forced-air cooled P16/300 yes SKS 1000N B6C 670 V16 500 670 1000 Capsules Natural cooled U3/515 no SKS 1000N B6C 670 V16 SU 500 670 1000 Capsules Natural cooled U3/515 no SKS 1200F B6C 800 V16 500 670 1200 Capsules Forced-air cooled P17/130 no SKS 1200F B6C 800 V16 SU 500 670 1200 Capsules Forced-air cooled P17/130 no SKS 1500F B6C 1010 V16 500 670 1500 Capsules Forced-air cooled P17/130 no SKS 1500F B6C 1010 V16 SU 500 670 1500 Capsules Forced-air cooled P17/130 no SKS 1890F B6C 1270 V16 500 670 1890 Capsules Forced-air cooled P18/180 no SKS 1890F B6C 1270 V16 ZU 500 670 1890 Capsules Forced-air cooled P18/180 no SKS 2580F B6C 1730 V16 500 670 2580 Capsules Forced-air cooled N4/250 no SKS 2580F B6C 1730 V16 ZU 500 500 670 670 2580 2580 Capsules Capsules Forced-air cooled Forced-air cooled N4/250 Z5/120 no no Footnotes: 2) In production new Cases 4.69333 7.2527 Semikube SlimLine SL 20 SKSE 2580F B6C 1730 V16 2) SKSE 2580F B6C 1730 V16 ZU 2) 3.12 5.49831 Dimensions in mm 8 1 Circuit 500 670 2580 Capsules Forced-air cooled Z5/120 no SKSE 1890F B6C 1270 V16 ZU 2) 500 670 1890 Capsules Forced-air cooled Z5/90 no SKSE 1890F B6C 1270 V16 2) 500 670 1890 Capsules Forced-air cooled Z5/90 no SKSE 1500F B6C 1010 V16 SU 2) 500 670 1500 Capsules Forced-air cooled Z5/60 no SKSE 1500F B6C 1010 V16 2) 500 670 1500 Capsules Forced-air cooled Z5/60 no SKSE 1200F B6C 800 V16 SU 2) 500 670 1200 Capsules Forced-air cooled Z5/60 no SKSE 1200F B6C 800 V16 2) 500 670 1200 Capsules Forced-air cooled Z5/60 no 2 3 4 5 6 7 8 3-phase half-controlled bridge rectifier SKS 88N B6HK 60 V16 500 670 88 SEMIPACK 1 Natural cooled P3/180 yes SKS 88N B6HK 60 V16 SU 500 670 88 SEMIPACK 1 Natural cooled P3/180 yes SKS 180F B6HK 120 V16 500 670 180 SEMIPACK 1 Forced-air cooled P3/180 yes SKS 180F B6HK 120 V16 SU 500 670 180 SEMIPACK 1 Forced-air cooled P3/180 yes SKS 215N B6HK 145 V16 500 670 215 Stud devices Natural cooled P1/150 no SKS 215N B6HK 145 V16 SU 500 670 215 Stud devices Natural cooled P1/150 no SKS 250F B6HK 170 V16 500 670 250 SEMIPACK 2 Forced-air cooled P3/265 yes SKS 250F B6HK 170 V16 SU 500 670 250 SEMIPACK 2 Forced-air cooled P3/265 yes SKS 355N B6HK 240 V16 500 670 355 Stud devices Natural cooled P1/200 no SKS 355N B6HK 240 V16 SU 500 670 355 Stud devices Natural cooled P1/200 no SKS 365F B6HK 245 V16 500 670 365 SEMIPACK 2 Forced-air cooled P16/200 yes SKS 365F B6HK 245 V16 SU 500 670 365 SEMIPACK 2 Forced-air cooled P16/200 yes SKS 570F B6HK 380 V16 500 670 570 SEMIPACK 3 Forced-air cooled P16/200 yes SKS 570F B6HK 380 V16 SU 500 670 570 SEMIPACK 3 Forced-air cooled P16/200 yes 9 10 Footnotes: 2) In production new 154 SEMIKRON 11 SEMIKRON 155 LINES CLASSES 640 SEMIPACK 3 Forced-air cooled P16/200 yes SKS 67N W3C 60 V16 500 - 67 SEMIPACK 1 Natural cooled P3/180 yes SKS 640F B6HK 430 V16 SU 500 670 640 SEMIPACK 3 Forced-air cooled P16/200 yes SKS 67N W3C 60 V16 SU 500 - 67 SEMIPACK 1 Natural cooled P3/180 yes SKS 700N B6HK 470 V16 500 670 700 Capsules Natural cooled P11/415 no SKS 140F W3C 120 V16 500 - 140 SEMIPACK 1 Forced-air cooled P3/180 yes SKS 700N B6HK 470 V16 SU 500 670 700 Capsules Natural cooled P11/415 no SKS 140F W3C 120 V16 SU 500 - 140 SEMIPACK 1 Forced-air cooled P3/180 yes SKS 845N B6HK 570 V16 500 670 845 Capsules Natural cooled U3/515 no SKS 170N W3C 150 V16 500 - 170 Stud devices Natural cooled P1/150 no SKS 845N B6HK 570 V16 SU 500 670 845 Capsules Natural cooled U3/515 no SKS 170N W3C 150 V16 SU 500 - 170 Stud devices Natural cooled P1/150 no SKS 970F B6HK 650 V16 500 670 970 SEMIPACK 5 Forced-air cooled P16/300 yes SKS 195F W3C 170 V16 500 - 195 SEMIPACK 2 Forced-air cooled P3/265 yes SKS 970F B6HK 650 V16 SU 500 670 970 SEMIPACK 5 Forced-air cooled P16/300 yes SKS 195F W3C 170 V16 SU 500 - 195 SEMIPACK 2 Forced-air cooled P3/265 yes SKS 1000N B6HK 670 V16 500 670 1000 Capsules Natural cooled U3/515 no SKS 275N W3C 240 V16 500 - 275 Stud devices Natural cooled P1/200 no SKS 1000N B6HK 670 V16 SU 500 670 1000 Capsules Natural cooled U3/515 no SKS 275N W3C 240 V16 SU 500 - 275 Stud devices Natural cooled P1/200 no SKS 1200F B6HK 800 V16 500 670 1200 Capsules Forced-air cooled P17/130 no SKS 290F W3C 250 V16 500 - 290 SEMIPACK 2 Forced-air cooled P16/200 yes SKS 1200F B6HK 800 V16 SU 500 670 1200 Capsules Forced-air cooled P17/130 no SKS 290F W3C 250 V16 SU 500 - 290 SEMIPACK 2 Forced-air cooled P16/200 yes SKS 1500F B6HK 1010 V16 500 670 1500 Capsules Forced-air cooled P17/130 no SKS 450F W3C 390 V16 500 - 450 SEMIPACK 3 Forced-air cooled P16/200 yes SKS 1500F B6HK 1010 V16 SU 500 670 1500 Capsules Forced-air cooled P17/130 no SKS 450F W3C 390 V16 SU 500 - 450 SEMIPACK 3 Forced-air cooled P16/200 yes SKS 1890F B6HK 1270 V16 500 670 1890 Capsules Forced-air cooled P18/180 no SKS 520F W3C 450 V16 500 - 520 SEMIPACK 3 Forced-air cooled P16/200 yes SKS 1890F B6HK 1270 V16 ZU 500 670 1890 Capsules Forced-air cooled P18/180 no SKS 520F W3C 450 V16 SU 500 - 520 SEMIPACK 3 Forced-air cooled P16/200 yes SKS 2580F B6HK 1730 V16 500 670 2580 Capsules Forced-air cooled N4/250 no SKS 545N W3C 470 V16 500 - 545 Capsules Natural cooled P11/415 no SKS 2580F B6HK 1730 V16 ZU 500 670 2580 Capsules Forced-air cooled N4/250 no SKS 545N W3C 470 V16 SU 500 - 545 Capsules Natural cooled P11/415 no SKS 650N W3C 560 V16 500 - 650 Capsules Natural cooled U3/515 no SKS 650N W3C 560 V16 SU 500 - 650 Capsules Natural cooled U3/515 no SKS 760F W3C 660 V16 500 - 760 SEMIPACK 5 Forced-air cooled P16/300 yes SKS 760F W3C 660 V16 SU 500 - 760 SEMIPACK 5 Forced-air cooled P16/300 yes SKS 780N W3C 675 V16 500 - 780 Capsules Natural cooled U3/515 no SKS 780N W3C 675 V16 SU 500 - 780 Capsules Natural cooled U3/515 no SKS 950F W3C 825 V16 500 - 950 Capsules Forced-air cooled P17/130 no SKS 950F W3C 825 V16 SU 500 - 950 Capsules Forced-air cooled P17/130 no SKS 1180F W3C 1020 V16 500 - 1180 Capsules Forced-air cooled P17/130 no SKS 1180F W3C 1020 V16 SU 500 - 1180 Capsules Forced-air cooled P17/130 no SKS 1540F W3C 1335 V16 500 - 1540 Capsules Forced-air cooled P18/180 no SKS 1540F W3C 1335 V16 SU 500 - 1540 Capsules Forced-air cooled P18/180 no SKS 2150F W3C 1860 V16 500 - 2150 Capsules Forced-air cooled N4/250 no SKS 2150F W3C 1860 V16 ZU 500 - 2150 Capsules Forced-air cooled N4/250 no Isolated A Heatsink profile V Cooling 670 1 Circuit 3-phase reverse parallel thyristor converter 3-phase uncontrolled bridge rectifier SKS 91N B6U 60 V16 500 670 SKS 91N B6U 60 V16 SU 500 SKS 185F B6U 125 V16 500 SKS 185F B6U 125 V16 SU SKS 290F B6U 195 V16 91 SEMIPACK 1 Natural cooled P3/180 yes 670 91 670 185 SEMIPACK 1 Natural cooled P3/180 yes SEMIPACK 1 Forced-air cooled P3/180 yes 500 670 500 670 185 SEMIPACK 1 Forced-air cooled P3/180 yes 290 SEMIPACK 2 Forced-air cooled P3/265 yes SKS 290F B6U 195 V16 SU 500 670 290 SEMIPACK 2 Forced-air cooled P3/265 yes SKS 425N B6U 285 V16 500 670 425 Stud devices Natural cooled P1/150 no SKS 425N B6U 285 V16 SU 500 670 425 Stud devices Natural cooled P1/150 no SKS 430F B6U 290 V16 500 670 430 SEMIPACK 2 Forced-air cooled P16/200 yes SKS 430F B6U 290 V16 SU 500 670 430 SEMIPACK 2 Forced-air cooled P16/200 yes SKS 535N B6U 360 V16 500 670 535 Stud devices Natural cooled P1/200 no SKS 535N B6U 360 V16 SU 500 670 535 Stud devices Natural cooled P1/200 no SKS 660F B6U 440 V16 500 670 660 SEMIPACK 3 Forced-air cooled P16/200 yes SKS 660F B6U 440 V16 SU 500 670 660 SEMIPACK 3 Forced-air cooled P16/200 yes SKS 850F B6U 570 V16 500 670 850 SEMIPACK 3 Forced-air cooled P16/200 yes SKS 850F B6U 570 V16 SU 500 670 850 SEMIPACK 3 Forced-air cooled P16/200 yes SKS 1185N B6U 795 V16 500 670 1185 Capsules Natural cooled P11/415 no SKS 1185N B6U 795 V16 SU 500 670 1185 Capsules Natural cooled P11/415 no SKS 1220F B6U 820 V16 500 670 1220 SEMIPACK 5 Forced-air cooled P16/300 yes SKS 1220F B6U 820 V16 SU 500 670 1220 SEMIPACK 5 Forced-air cooled P16/300 yes SKS 1630N B6U 1090 V16 500 670 1630 Capsules Natural cooled U3/515 no SKS 1630N B6U 1090 V16 ZU 500 670 1630 Capsules Natural cooled U3/515 no SKS 1910N B6U 1280 V16 500 670 1910 Capsules Natural cooled U3/515 no SKS 1910N B6U 1280 V16 ZU 500 670 1910 Capsules Natural cooled U3/515 no SKS 1950F B6U 1305 V16 500 670 1950 Capsules Forced-air cooled P17/130 no SKS 1950F B6U 1305 V16 ZU 500 670 1950 Capsules Forced-air cooled P17/130 no SKS 2300F B6U 1540 V16 500 670 2300 Capsules Forced-air cooled P18/180 no SKS 2300F B6U 1540 V16 ZU 500 670 2300 Capsules Forced-air cooled P18/180 no SKS 4015F B6U 2690 V16 500 500 670 670 4015 2300 Capsules Capsules Forced-air cooled Forced-air cooled N4/250 Z5/120 no no SKSE 2300F B6U 1540 V16 ZU 2) SKSE 2300F B6U 1540 V16 2) V Component Family 500 Circuit DC Current SKS 640F B6HK 430 V16 Isolated A Heatsink profile DC Current V Cooling VDC V 3-phase half-controlled bridge rectifier 8 VDC Type Component Family VAC Type Stacks / SEMISTACK CLASSICS VAC Stacks / SEMISTACK CLASSICS 500 670 2300 Capsules Forced-air cooled Z5/120 no SKSE 1950F B6U 1305 V16 ZU 2) 500 670 1950 Capsules Forced-air cooled Z5/90 no SKSE 1950F B6U 1305 V16 2) 500 670 1950 Capsules Forced-air cooled Z5/90 no 2 3 4 5 6 Footnotes: 2) In production new 7 8 9 10 Footnotes: 2) In production new 11 156 SEMIKRON SEMIKRON 157 LINES CLASSES Stacks / SEMISTACK CLASSICS Cases SKS 1 2 3 4 5 SKSE 6 7 8 8 9 10 Dimensions in mm 11 158 SEMIKRON SEMIKRON 159 LINES Systems CLASSES Systems Most Compact Power Electronics System for Utility Vehicles SKAI ® 2 IGBT motor controller 115V up to 800V 1 SEMIKRON’s motor controllers are already fully equipped with current sensors, IGBT drivers, DC link capacitors and a fast processor (DSP). The systems are designed to operate with supply voltages of 24V up to 800V and with output power ratings of up to 250 kVA. 2 Inom in A rms ProductPage SKAI 2 162 SKAI ® 2 MOSFET Single Motor Controller 150 200300400 450 24V up to 115V 3 4 Inom in A rms SKAI ® 2 MOSFET Dual Motor Controller 150 200300400 450 5 24V up to 115V 6 7 Inom in A rms 150 200300400 450 8 9 9 10 For detailed information please refer to data sheets. Further information: www.semikron.com/systems 160 SEMIKRON 11 SEMIKRON 161 LINES Cases Case DSP Arms Case 1 Cooling V Topology Inom Vbattery (max) Type Systems / SKAI2 CLASSES Systems / SKAI2 Circuit 1 MOSFET - Motor Controller SKAI 60 A2 MD10-P 1) 72 260 3-Phase Baseplate Yes 3 SKAI 60 A2 MD10-L 1) 72 260 3-Phase Forced Air Yes 1 SKAI 60 A2 MD10-W 1) 72 450 3-Phase Liquid Yes 2 SKAI 70 A2 MD15-W 1) 115 450 3-Phase Liquid Yes 2 SKAI 60 A2 MM10-L 1) 72 190 Dual 3-Phase Forced Air Yes 4 SKAI 60 A2 MM10-W 1) 72 300 Dual 3-Phase Liquid Yes 5 SKAI 70 A2 MM15-P 1) 115 140 Dual 3-Phase Baseplate Yes 6 SKAI 70 A2 MM15-L 115 140 Dual 3-Phase Forced Air Yes 4 115 300 Dual 3-Phase Liquid Yes 5 SKAI 90 A2 GD06-WCI 2) 450 300 3-Phase Liquid Yes 7 GD12-WCI 2) 800 300 3-Phase Liquid Yes 7 1) SKAI 70 A2 MM15-W 1) 2 3 IGBT - Motor Controller SKAI 45 A2 4 Case 2 SKAI 90 A2 GD06-WDI 450 300 3-Phase Liquid No 7 SKAI 45 A2 GD12-WDI 800 300 3-Phase Liquid No 7 2) 2) 5 6 Footnotes: 1) Sample status / 2) In production new 7 8 9 9 10 Dimensions in mm 11 162 SEMIKRON SEMIKRON 163 LINES Systems / SKAI2 Cases Cases Case 3 Case 5 CLASSES Systems / SKAI2 1 2 3 4 5 Case 4 Case 6 6 7 8 9 9 10 Dimensions in mm Dimensions in mm 11 164 SEMIKRON SEMIKRON 165 LINES CLASSES Systems / SKAI2 Cases Case 7 1 2 3 4 5 6 7 8 9 9 10 Dimensions in mm 11 166 SEMIKRON SEMIKRON 167 LINES Discretes / Chips CLASSES Discretes / Chips Chips SEMICELL Chips – CAL (Controlled Axial Lifetime) freewheeling diodes are available in 600V / 650V, 1200V, and 1700V voltage classes with current ratings up to 200A. Depending on the target application’s frequency, variants with custom designed switching properties are available. Rectifier diodes and thyristors are designed for the 1600V voltage class, covering a wide range of current ratings up to 770A, equivalent to a die size of more than 500mm2. Variable configurations of the thyristor gate (corner vs. center gate) enable an optimized bond layout in the respective target design on the customer side. All chips are used throughout SEMIKRON’s module and system range which means a proven history of outstanding performance and reliability. They are compatible to various joint and assembly techniques. Customers may benefit from the vast application knowledge of the SEMIKRON engineering team. Freewheling 600V up to 1700V Diode CAL 1 2 IFnom in A Rectifier 0 1020 40 6080100 200 300 400 500 600 700 800 1600V 3 Diode 4 ProductPage Chips SEMICELL Freewheeling Diode CAL 170 Rectifier Diode 173 IF in A Thyristor 0 1020 40 6080100 200 300 400 500 600 700 800 5 1600V Thyristor173 6 IT in A 0 1020 40 6080100 200 300 400 500 600 700 800 7 8 9 10 10 For detailed information please refer to data sheets. Further information: www.semikron.com/chips 168 SEMIKRON 11 SEMIKRON 169 LINES VF @Tj=25°C IF @ VF Tj=25°C Qrr @Tj=125°C VRRM IF @Tj=150°C IFSM @Tj=150°C 10ms VF @Tj=25°C IF @ VF Tj=25°C Qrr @Tj=125°C IFSM @Tj=150°C 10ms Type IF @Tj=150°C VRRM Type Discretes / Chips / SEMICELL CLASSES Discretes / Chips / SEMICELL V A A V A µC V A A V A µC 600V - Freewheeling Diodes CAL I3 Fast 1 1200V - Freewheeling Diodes CAL I3 Fast SKCD 06 C 060 I3 600 15 80 1.35 8 1 SKCD 11 C 120 I3 1200 15 130 2.00 10 1.6 SKCD 09 C 060 I3 600 20 100 1.35 13 1.46 SKCD 18 C 120 I3 1200 25 200 2.00 15 3 SKCD 18 C 060 I3 600 30 200 1.35 25 1.98 SKCD 23 C 120 I3R 1200 30 270 2.00 25 3.8 SKCD 31 C 060 I3 600 50 440 1.35 50 3.3 SKCD 31 C 120 I3 1200 40 370 2.00 35 5.3 SKCD 47 C 060 I3 600 80 720 1.35 85 6.2 SKCD 47 C 120 I3 1200 55 600 2.00 55 7.5 SKCD 61 C 060 I3 600 100 1000 1.35 110 8.7 SKCD 61 C 120 I3 1200 75 800 2.00 70 11 SKCD 81 C 060 I3 600 150 1260 1.35 155 11.5 SKCD 81 C 120 I3 1200 100 1100 2.00 100 16.5 SKCD 121 C 060 I3 600 210 2100 1.35 245 18 SKCD 121 C 120 I3 1200 150 1600 2.00 155 24 2 3 1200V - Freewheeling Diodes CAL High Density IF @Tj=175°C IFSM @Tj=150°C 10ms VF @Tj=25°C IF @ VF Tj=25°C Qrr @Tj=150°C VRRM V A A V A µC 600 10 65 1.23 4.7 1.3 1.42 600V - Freewheeling Diodes CAL High Density 1200 6 60 1.50 5 1.24 SKCD 11 C 120 I HD 1200 15 140 1.50 12 2.9 SKCD 14 C 120 I HD 1200 20 170 1.50 15 4 SKCD 18 C 120 I HD 1200 25 200 1.50 20 5 SKCD 31 C 120 I HD 1200 55 480 1.50 45 11 SKCD 47 C 120 I HD 1200 85 700 1.50 70 17.4 SKCD 61 C 120 I HD 1200 115 900 1.50 90 24.5 SKCD 81 C 120 I HD 1200 160 1150 1.50 130 34.4 95 1.23 8 160 1.23 13 2.4 SKCD 16 C 060 I HD 600 50 320 1.23 25 3.87 SKCD 24 C 060 I HD 600 75 395 1.23 41 6 SKCD 42 C 060 I HD 600 100 810 1.23 75 11.1 SKCD 61 C 060 I HD 600 150 1080 1.23 112 15.75 SKCD 81 C 060 I HD 600 200 1310 1.23 152 19.69 Err @Tj=150°C 20 30 IF @ VF Tj=25°C 600 600 VF @Tj=25°C SKCD 06 C 060 I HD IFSM @Tj=150°C 10ms Type SKCD 09 C 060 I HD 4 5 IF @Tj=175°C SKCD 04 C 060 I HD SKCD 06 C 120 I HD VRRM Type V A A V A mJ SKCD 08 C 120 I4F 1200 8 36 2.33 8 0.4 SKCD 11 C 120 I4F 1200 15 65 2.38 15 0.6 SKCD 16 C 120 I4F 1200 25 100 2.41 25 1 SKCD 22 C 120 I4F 1200 35 170 2.30 35 1.6 SKCD 31 C 120 I4F 1200 50 270 2.22 50 2.6 SKCD 46 C 120 I4F 1200 75 430 2.17 75 4.2 SKCD 46 C 120 I4F R 1200 75 430 2.17 75 4.2 SKCD 53 C 120 I4F 1200 100 550 2.20 100 5.4 SKCD 81 C 120 I4F 1200 150 900 2.14 150 8.7 6 1200V - Freewheeling Diodes CAL I4 Fast IF @Tj=175°C IFSM @Tj=150°C 10ms VF @Tj=25°C IF @ VF Tj=25°C Err @Tj=150°C VRRM Type V A A V A mJ SKCD 24 C 065 I4F 650 50 460 1.30 39 1.1 SKCD 42 C 065 I4F 650 100 680 1.30 73 2.2 SKCD 61 C 065 I4F 650 150 1100 1.30 109 3.8 SKCD 81 C 065 I4F 650 200 1290 1.30 148 5.8 7 8 650V - Freewheeling Diodes CAL I4 Fast 9 10 10 11 170 SEMIKRON SEMIKRON 171 LINES VF @Tj=25°C IF @ VF Tj=25°C Qrr @Tj=125°C VRRM IF(DC) @Tj=150°C IFSM @Tj=150°C 10ms VF @Tj=25°C IF @ VF Tj=25°C trr @Tj=25°C IFSM @Tj=150°C 10ms Type IF @Tj=150°C VRRM Type Discretes / Chips / SEMICELL CLASSES Discretes / Chips / SEMICELL V A A V A µC V A A V A µs 1700V - Freewheeling Diodes CAL Fast 1600V - Rectifier SKCD 47 C 170 I 1700 55 550 2.05 55 15 SKR 3,5 Qu bond6) 1600 25 200 1.00 8 20 SKCD 61 C 170 I 1700 75 720 2.05 75 24 SKR 4,2 Qu bond6) 1600 35 270 1.00 13 20 SKR 4,8 Qu bond6) 1600 45 350 1.00 18 21 SKR 5,6 Qu bond6) 1600 50 490 1.00 25 22 SKR 6,2 Qu bond6) 1600 65 600 1.00 33 22 SKR 7,0 Qu bond6) 1600 75 890 1.00 45 23 SKR 8,9 Qu bond6) 1600 140 1380 1.00 77 26 SKR 10,3 Qu bond6) 1600 170 1650 1.00 106 29 6) SKR 12,4 Qu bond 1600 235 2300 1.00 160 34 SKR 15,2 Qu bond6) 1600 330 3800 1.00 245 42 SKR 16,3 x 18,2 Qu bond6) 1600 365 5100 1.00 320 49 SKN 18,2 Qu bond6) 1600 380 5500 1.00 360 53 SKN 22,4 Qu bond6) 1600 770 9450 1.00 550 72 75 25 SKCD 61 C 170 I HD 1700 100 710 1.73 100 35 SKCD 81 C 170 I HD 1700 150 1070 1.73 150 53.5 VRRM IF @Tj=175°C IFSM @Tj=150°C 10ms VF @Tj=25°C IF @ VF Tj=25°C Err @Tj=150°C V A A V A mJ Type SKCD 28 C 170 I4F 1700 40 280 1.71 23 12 1700 75 450 1.71 43 17 SKCD 56 C 170 I4F 1700 100 580 1.71 57 22.2 SKCD 81 C 170 I4F 1700 150 860 1.71 89 31.5 3 4 5 V A A V A µs SKT 8,9 Qu ZG bond6) 1600 105 1000 1.98 100 150 SKT 10,3 Qu ZG bond6) 1600 125 1250 1.98 100 150 SKT 12,4 Qu ZG bond6) 1600 165 1800 1.98 100 150 SKT 13,5 Qu ZG bond6) 1600 185 2300 1.98 100 135 6) SKT 15,2 Qu ZG bond 1600 215 3200 1.98 100 150 SKT 18,2 Qu ZG bond6) 1600 250 5000 1.98 100 150 SKT 24,3 Qu ZG bond SG 6) 1600 480 8200 1.98 150 150 SKT 5,6 Qu RG bond6) 1600 60 280 1.98 100 150 SKT 7,0 Qu RG bond6) 1600 75 450 1.98 100 150 SKT 8,9 Qu RG bond6) 1600 105 1000 1.98 100 150 SKT 10,3 Qu RG bond6) 1600 125 1250 1.98 100 150 SKT 12,4 Qu RG bond6) 1600 165 1800 1.98 100 150 1700V - Freewheeling Diodes CAL I4 Fast SKCD 46 C 170 I4F 2 Footnotes: 6) solderable top metallization on request tq @Tj=130°C 1.73 IGT @Tj=25°C 650 VGT @Tj=25°C 75 ITSM @Tj=130°C 10ms 1700 IT(DC) @ Tj=130°C SKCD 47 C 170 I HD VRRM, VDRM 1700V - Freewheeling Diodes CAL High Density Type 1 6 1600V - Thyristor Central Gate 7 1600V - Thyristor Corner Gate 8 Footnotes: 6) solderable top metallization on request 9 10 10 11 172 SEMIKRON SEMIKRON 173 LINES Discretes CLASSES Discretes Discrete diodes Discrete diodes – SEMIKRON offers discrete diodes in three major packaging styles; axial epoxy diodes for PCB mounting, stud screw fit diodes that are convenient for applications like welding and rotating rectifiers in brushless generators due to their robustness and simple mounting, besides the capsule (disc) diodes for high power applications. The line offers standard rectifiers with current ratings up to 6000A, fast rectifiers up to 140A, and avalanche rectifiers that allow high voltage rectification up to 5000V with single diodes and much more when connected in series. Typical applications: all-purpose rectifiers, battery chargers, welding equipment, rotating rectifiers for brushless generators, electroplating, free-wheeling diodes, high voltage rectifiers, electrostatic filters, blocking diodes and others. Discrete thyristors – SEMIKRON’s discrete thyristors are offered as stud screw fit types that are convenient for applications which require robustness and simple mounting, plus capsule (disc) types for high power applications. The line has phase control types for current ratings up to 1200A, with blocking and reverse voltages up to 1800V, covering the major market applications. Typical applications: soft-starters, resistance heating, static switches, battery chargers, welding equipment, static excitation and others. Leaded 100V up to 2000V 1 A Stud screw-fit 0 5 10 20 4060 80 100 200 300 400 500 600 2 400V up to 5000V 3 A Capsule 0 5 10 20 4060 80 100 200 300 400 500 600 4 200V up to 600V 5 ProductPage IFAV in A Discrete diode 0500 1000 2000 3000 4000 5000 6000 6 Leaded176 Stud screw-fit 177 Capsule179 Discrete thyristor Stud screw-fit 180 Discrete thyristors 7 Stud screw-fit 400 V up to 1800 V Capsule181 8 A Capsule 0 100 300 500 700 900 1200 1400 1600 1800 9 400 V up to 1800 V 10 10 For detailed information please refer to data sheets. Further information: www.semikron.com/discrete-diodes www.semikron.com/discrete-thyristors 174 SEMIKRON A 0 100 300 500 700 900 1200 1400 1600 1800 SEMIKRON 175 11 Topology Picture Standard recovery LINES CLASSES V A °C A V K/W °C Case °C Tj K/W Rth( j-c) per chip V VF Tj A IFSM@Tj=25°C Rth( j-c) per chip °C TC VF A Current (A) IFSM@Tj=25°C V Case TC Type Current (A) Voltage (V) Type Discretes / Diodes / Stud Screw Fit Voltage (V) Discretes / Diodes / Leaded Standard recovery SK 1 1000-1600 1.45 60 60 1.50 85 -40 ... +150 E33 SKN 20 400-1600 20 125 375 1.55 2 -40 ... +180 E9 SKN 2,5 2) 400-1600 2.5 45 180 1.20 55 -40 ... +180 E5 SKN 26 400-1600 25 100 375 1.55 2 -40 ... +180 E8 SK 3 1000-1600 3.3 85 180 1.20 60 -40 ... +150 E34 SKN 45 400-1600 45 125 700 1.60 0.85 -40 ... +180 E12 SKN 5 2) 200-1600 5 45 190 1.25 25 -40 ... +180 E6 SKN 70 400-1600 70 125 1150 1.50 0.55 -40 ... +180 E12 SK 62) 1000-1600 6 50 375 1.10 55 -40 ... +150 SK6 SKN 71 400-1600 70 125 1150 1.50 0.55 -40 ... +180 E11 SKN 100 400-1800 100 120 1750 1.55 0.45 -40 ... +180 E13 SKN 130 400-1800 130 125 2500 1.50 0.35 -40 ... +180 E14 SKN 240 400-1800 240 125 6000 1.40 0.2 -40 ... +180 E15 Avalanche SKa1 1300-1700 SKNa2 2) SKa3 SKNa4 2) SKa 62) 1.45 60 60 1.50 85 -40 ... +150 1300-1700 2 45 180 1.20 55 -40 ... +150 E5 1300-1700 3.3 90 180 1.20 60 -40 ... +150 E34 1300-1700 3.7 35 190 1.20 25 -40 ... +150 E6 1300-1600 6 50 375 1.10 55 -40 ... +150 SK6 Footnotes: 2) In production new Cases 5.68364 1 Topology Picture 2.42667 E33 / E34 / SK6 E5 E33 SKN 320 400-1600 320 125 9000 1.35 0.16 -40 ... +180 E16 SKN 400 1800-3000 400 100 9000 1.45 0.11 -40 ... +160 E17 SKR 20 400-1600 20 125 375 1.55 2 -40 ... +180 E9 SKR 26 400-1600 25 100 375 1.55 2 -40 ... +180 E8 SKR 45 400-1600 45 125 700 1.60 0.85 -40 ... +180 E12 SKR 70 400-1600 70 125 1150 1.50 0.55 -40 ... +180 E12 SKR 71 400-1600 70 125 1150 1.50 0.55 -40 ... +180 E11 SKR 100 400-1800 100 120 1750 1.55 0.45 -40 ... +180 E13 SKR 130 400-1800 130 125 2500 1.50 0.35 -40 ... +180 E14 SKR 240 400-1800 240 125 6000 1.40 0.2 -40 ... +180 E15 SKR 320 400-1600 320 125 9000 1.35 0.16 -40 ... +180 E16 SKN 2F17 400-1000 17 113 450 2.15 1.2 -40 ... +150 E7 SKN 3F20 800-1200 20 104 375 2.15 1.2 -40 ... +150 E7 SKN 2F50 400-1000 50 105 1100 1.80 0.5 -40 ... +150 E10 SKN 60F 1200-1700 60 100 1400 1.75 0.5 -40 ... +150 E10 SKN 135F 800-1200 135 100 2500 1.95 0.2 -40 ... +150 E14 SKN 136F 800-1200 135 100 2500 1.95 0.2 -40 ... +150 E31 SKN 140F 1200-1700 140 100 2500 1.80 0.2 -40 ... +150 E14 SKN 141F 1200-1700 140 100 2500 1.80 0.2 -40 ... +150 E31 SKR 2F17 400-1000 17 113 450 2.15 1.2 -40 ... +150 E7 SKR 3F20 800-1200 20 104 375 2.15 1.2 -40 ... +150 E7 SKR 2F50 400-1000 50 95 800 1.80 0.65 -40 ... +150 E10 SKR 60F 1200-1700 60 100 1400 1.75 0.5 -40 ... +150 E10 SKR 135F 800-1200 135 100 2500 1.95 0.2 -40 ... +150 E14 SKR 136F 800-1200 135 100 2500 1.95 0.2 -40 ... +150 E31 SKR 140F 1200-1700 140 100 2500 1.80 0.2 -40 ... +150 E14 SKR 141F 1200-1700 140 100 2500 1.80 0.2 -40 ... +150 E31 SKNa 20 1300-1700 20 93 375 1.55 2 -40 ... +150 E9 SKNa 22 3600-5000 25 104 450 1.95 1 -40 ... +160 E42 SKNa 47 3600-5000 45 106 700 1.80 0.6 -40 ... +160 E43 SKNa 102 3600-5000 125 80 1900 1.90 0.3 -40 ... +160 E44 SKNa 202 3600-5000 200 80 3800 1.95 0.2 -40 ... +160 E45 SKNa 402 3600-5000 400 88 7800 1.85 0.1 -40 ... +160 E46 2 3 4 Fast recovery 3.70075 1.04 2.27931 E6 5 6 7 Avalanche 1.04828 Dimensions in mm 8 9 10 10 11 176 SEMIKRON SEMIKRON 177 Cases Type TC IFSM@Tj=25°C VF Rth( j-c) per chip Tj SKN 6000 Current (A) E9 / E12 ... E17 V A °C A V K/W °C 200-600 6000 85 60000 1.30 0.012 -40 ... +180 Case 3.47815 E7 / E8 / E10 / E11 / E31 Voltage (V) 2.66667 LINES Discretes / Diodes / Capsules CLASSES Discretes / Diodes / Stud Screw Fit 1 Topology Picture E35 2 Cases E35 3 4 2.84667 3.16195 3.87661 E 42 / E 43 / E 44 / E 45 / E 46 5 6 7 Dimensions in mm 8 3.25193 Dimensions in mm 9 10 10 11 178 SEMIKRON SEMIKRON 179 Topology Picture LINES CLASSES V A °C A V A K/W °C Case °C Tj K/W Rth( j-c) per chip A IT@VT Tj V VT @ IT, Tj=25°C Rth( j-c) per chip A ITSM@Tj=25°C IT@VT °C TC VT @ IT, Tj=25°C A Current (A) ITSM@Tj=25°C V Case TC Type Current (A) Voltage (V) Type Discretes / Thyristors / Capsules Voltage (V) Discretes / Thyristors / Stud Screw Fit SKT 10 600-1200 10 111 250 1.6 30 1.3 -40 ... +130 B1 SKT 340 1200-1800 340 82 5700 1.9 1000 0.072 -40 ... +125 B8 SKT 16 400-1800 16 104 370 2.4 75 0.9 -40 ... +130 B2 SKT 493 400-1800 490 80 8000 2.1 1500 0.047 -40 ... +125 B11a SKT 24 400-1800 24 95 450 1.9 75 0.9 -40 ... +130 B2 SKT 551 1200-1800 550 85 9000 1.65 1500 0.047 -40 ... +125 B11 SKT 40 400-1800 40 80 700 1.95 120 0.66 -40 ... +130 B3 SKT 553 400-1800 550 85 9000 1.65 1500 0.047 -40 ... +125 B11a SKT 50 600-1800 50 78 1050 1.8 120 0.6 -40 ... +130 B3 SKT 760 1200-1800 760 80 15000 1.65 2400 0.04 -40 ... +125 B10 SKT 55 400-1800 55 92 1300 1.8 200 0.47 -40 ... +130 B5 SKT 1200 1200-1800 1200 85 30000 1.65 3600 0.021 -40 ... +125 B14 SKT 80 600-1800 80 85 1700 2.25 300 0.28 -40 ... +130 B5 SKT 100 400-1800 100 85 2000 1.75 300 0.28 -40 ... +130 B5 SKT 130 400-1600 130 85 3500 2.25 500 0.18 -40 ... +130 B6 SKT 160 400-1600 160 84 4300 1.75 500 0.18 -40 ... +130 B6 SKT 250 400-1600 250 85 7000 1.65 800 0.123 -40 ... +130 B7 SKT 300 400-1600 300 93 11000 1.45 800 0.096 -40 ... +130 B7 1 Topology Picture 2 Cases 3 B8 ... B14 Cases 4 B1 ... B3 5 Dimensions in mm B5 ... B7 6 7 8 9 10 Dimensions in mm 10 11 180 SEMIKRON SEMIKRON 181 Heatsinks – SEMIKRON offers a broad range of different heat sinks including forced and natural air cooling. The heatsinks are available for capsules, insulated base modules or IPMs. Fans – SEMIKRON offers a broad range of axial, centrifugal and radial fans for different inverter designs. LINES Heatsinks / Fans CLASSES Accessories Heatsinks / Fans Heatsinks Forced air cooled 1 Natural cooled 2 ProductPage 3 Heatsinks184 Fans186 Fans Axial 4 Centrifugal 5 6 Radial 7 8 9 10 For detailed information please refer to data sheets. Further information: www.semikron.com/heatsinks www.semikron.com/fans 11 182 SEMIKRON 11 SEMIKRON 183 kg/m LINES CLASSES Produkt Picture Weight kg Weight Weight K/W Rthsa forced air cooling Weight K/W Suitable for Rthsa forced air cooling Type Rthsa natural cooling Suitable for Type Accessories / Heatsinks Rthsa natural cooling Accessories / Heatsinks K/W K/W kg kg/m 1 Produkt Picture Forced-air cooled Forced-air cooled 2 N4 Capsules - 0.04 6.3 25.1 R 4A Isolated base modules 1.4 0.38 0.6 - P 11 Capsules 0.2 0.05 3.8 15 P 16 SKiiP or modules - 0.06 1.3 23.5 3 P 17 Capsules 0.45 0.12 1.5 10.6 Px 3089) SKiiP or modules - 0.013 2 12.2 4 P1 Studs or modules 0.7 0.4 0.8 11.3 P 18 Capsules 0.37 0.08 1.6 12.2 P 89) Capsules 0.35 0.07 1.7 9.6 6 P3 P 8,59) Capsules 0.3 0.08 1.5 9.5 P 99) Capsules 0.21 0.06 4.1 17.8 U3 Capsules 0.14 0.06 7.1 23.7 5 Isolated base modules 0.45 0.14 0.7 17.6 7 Natural cooled P 49) Stud device 0.27 - 4.1 8 20.6 9 Footnotes: 9) Non standard item, available on request only, typical minimum batch quantities of 60 pieces will apply P 219) 11 Isolated base modules - 0.02 4.1 10 40.8 Footnotes: 9) Non standard item, available on request only, typical minimum batch quantities of 60 pieces will apply 184 SEMIKRON 11 SEMIKRON 185 LINES f Vair/t Pmax TAmax Weight Noise Vin Type CLASSES Accessories / Fans V Hz m³/h W °C kg dB Produkt Picture 1 Axial Fans SKF 3-230-01 230 50 / 60 150 / 174 15 / 14 70 0.55 SKF RE-024-01 24 - 500 90 75 0.43 76 SKF SR-024-01 24 - 56 3.6 70 0.085 43 SKF 9-230-01 230 50 / 60 375 / 440 24 / 26 70 1 54 / 60 SKF 8-230-01 230 50 / 60 325 / 380 45 / 39 50 / 70 1.1 49 / 53 SKF 17A-230-11 230 50 / 60 850 / 930 110 / 120 70 2 74 SKF 17B-230-12 230 50 / 60 1175 / 1300 230 70 6.1 73 / 76 37 / 41 2 Centrifugal Fans 3 4 Radial Fans SKF 16A-230-01 230 50 / 60 630 / 590 130 / 140 60 / 50 3.3 59 SKF 16P-230-01 230 50 / 60 1125 165 60 3.9 - 5 SKF 16B-230-01 230 50 / 60 640 / 580 167 / 191 70 / 50 3.75 58 / 57 6 SKF 16A-230-11 230 50 / 60 630 / 590 130 / 140 60 / 50 3.3 59 7 8 9 10 11 11 186 SEMIKRON SEMIKRON 187 LINES Thermal Interface Materials CLASSES Accessories Thermal Interface Materials Baseplate-less SEMIKRON was the first power module manufacturer on the market who offered power modules with pre-applied thermal interface material. With more than two decades of field experience and more than ten million pre-printed modules in the field, benchmarks are being set. The modules with pre-applied TIM are printed in a clean environment on an automated and SPC controlled silk screen and stencil printing line. Based on different application requirements and different environmental conditions, SEMIKRON offers a broad range of thermal interface materials. Additionally to a standard silicone based and a silicon free thermal grease, a phase change material and the new high performance thermal paste with an improved thermal performance are available. SEMIKRON formulated a clear strategy that phase change materials will be applied on modules with baseplates only and thermal greases on modules without a baseplate. High Performance Thermal Paste 1 Standard Grease silicone based Standard Grease silicone free e.g. MiniSKiiP Baseplate 2 3 Phase Change Material 4 ProductPage Thermal interface materials 190 e.g. SEMiX Press-Fit 5 6 7 8 9 10 For detailed information please refer to data sheets. Further information: www.semikron.com/thermal-interface-materials 11 11 188 SEMIKRON SEMIKRON 189 LINES Weight Thickness (after assembly) Thermal conductance TiM material Case Type CLASSES Accessories / Thermal Interface Materials mg µm W/m*K 1 High Performance Thermal Paste TP(HPTP)Mini112) 1 II High Performance Thermal Paste - - 2.5 TP(HPTP)Mini2II.Gen 2) 2 II High Performance Thermal Paste 605 - 2.5 TP(HPTP)Mini3II.Gen 2) 3 II High Performance Thermal Paste 695 - 2.5 12) TP(HPTP)Mini2GB 2 II High Performance Thermal Paste - - 2.5 TP(HPTP)Mini3GB12) 3 II High Performance Thermal Paste - - 2.5 TP(HPTP)Mini8AxB2) 8I High Performance Thermal Paste 760 - 2.5 TP(HPTP)Mini8AC2) 8I High Performance Thermal Paste 900 - 2.5 TP(HPTP)SEMITOP312) 3 High Performance Thermal Paste - - 2.5 TP(HPTP)SEMITOP412) 4 High Performance Thermal Paste - - 2.5 TP(HPTP)SKiM4 4 High Performance Thermal Paste - - 2.5 TP(HPTP)SKiM63 2) 63 High Performance Thermal Paste 800 - 2.5 TP(HPTP)SKiM93 2) 93 High Performance Thermal Paste 1015 - 2.5 TP(P12)Mini0 0 II Wacker P12 - 33 0.8 TP(P12)Mini1II.Gen 1 II Wacker P12 - 30 0.8 TP(P12)Mini2I.Gen 2I Wacker P12 - 50 0.8 TP(P12)Mini2II. Gen 2 II Wacker P12 - 55 0.8 TP(P12)Mini3I.Gen 3I Wacker P12 - 45 0.8 TP(P12)Mini3II.Gen 3 II Wacker P12 - 40 0.8 TP(P12)Mini2 GB 2 II Wacker P12 - 35 0.8 TP(P12)Mini3 GB 3 II Wacker P12 - 35 0.8 12) 2 3 Standard Grease silicone based TP(P12)Mini8AC 8 I AC Wacker P12 - 60 0.8 TP(P12)Mini8AxB 8 I AB Wacker P12 - 60 0.8 TP(P12)SEMITOP2 2 Wacker P12 - 29 0.8 TP(P12)SEMITOP3 3 Wacker P12 - 47 0.8 TP(P12)SEMITOP4 4 Wacker P12 - 31 0.8 TP(P12)SKiM4 4 Wacker P12 - 44 0.8 TP(P12)SKiM63 63 Wacker P12 - 21 0.8 TP(P12)SKiM93 93 Wacker P12 - 21 0.8 TP(HTC)Mini2II.Gen 2 II Electrolube HTC - 75 0.9 TP(HTC)Mini3II.Gen 3 II Electrolube HTC - 60 0.9 TP(HTC)Mini2GB13) 2 II Electrolube HTC - - 0.9 TP(HTC)Mini3GB13) 3 II Electrolube HTC - - 0.9 TP(HTC)SEMITOP213) 2 Electrolube HTC - - 0.9 TP(HTC)SEMITOP313) 3 Electrolube HTC - - 0.9 TP(HTC)SEMITOP413) 4 Electrolube HTC - - 0.9 TP(HTC)SKiM413) 4 Electrolube HTC - - 0.9 TP(HTC)SKiM6313) 63 Electrolube HTC - - 0.9 TP(HTC)SKiM9313) 93 Electrolube HTC - - 0.9 TP(HALA P8) SEMiX 1s 2) 1s HALA TPC-Z-PC-P8 100 - 3.4 TP(HALA P8) SEMiX 13 2) 13 HALA TPC-Z-PC-P8 170 - 3.4 TP(HALA P8) SEMiX 3s 2) 3s HALA TPC-Z-PC-P8 160 - 3.4 TP(HALA P8) SEMiX 3p 2) 3p HALA TPC-Z-PC-P8 250 - 3.4 TP(HALA P8) SEMiX 5p 2) 5p HALA TPC-Z-PC-P8 270 - 3.4 TP(HALA P8) SEMITRANS 312) 3 HALA TPC-Z-PC-P8 - - 3.4 TP(HALA P8) SEMITRANS 1012) 5 HALA TPC-Z-PC-P8 - - 3.4 4 5 6 Standard Grease silicone free 7 8 Phase Change Material 9 10 Footnotes: 2) In production new / 12) comming soon / 13) available on request 11 11 190 SEMIKRON SEMIKRON 191 LINES CLASSES Service & Contact Services SEMIKRON Online Shop 194 Product Sample Request 195 Technical Seminars 196 SemiSel Simulation 197 Applications 198 1 2 Technologies199 Application Manual 200 Abbreviations 201 Contact 3 4 Africa 202 Asia 203 Australia & New Zealand 208 Europe 209 North America 213 South America 214 5 6 7 8 9 10 11 192 SEMIKRON SEMIKRON 193 Delivering expert support Product sample service at a click Our specialty lies in the delivery of expert support to small and medium The development of prototypes is more precise and faster if power electronics modules are sized enterprises by offering them the following services: integrated during the design-in phase. As of now, you can request samples for electronic design LINES Product Sample Request CLASSES SEMIKRON Online Shop online from SEMIKRON during this project phase and get easy access to our samples with Technical & sales support Reply within 24 hours Multilingual sales and support Design-in-support directly from manufacturers specialist Worldwide shipping Fast shipping to more than 100 countries Low volume purchasing possible no obligation. Depending on the design, application and the size of the project, we also offer this service free of charge. Three steps to getting your SEMIKRON sample - Initial contact Fill in the request form for ordering samples - Consultation Response from SEMIKRON within 24 hours - Dispatch SEMIKRON sends the sample without lengthy waiting periods Shipping directly from manufacturers warehouse Over 600 most common SCRs, IGBT modules, bridge rectifiers and IPMs in stock Transparency & efficiency Transparent price breaks online Up-to-date availability information Instant quotes using the online quotation tool Cross reference search Find a fully compatible SEMIKRON device for any other brand: shop.semikron.com/en/Cross-Reference-Search/ Visit us at shop.semikron.com 194 SEMIKRON Further information: www.semikron.com/sample-request SEMIKRON 195 Technical seminars at SEMIKRON Free support for your converter design LINES SemiSel Simulation CLASSES Technical Seminars SEMIKRON develops innovative power electronics products for Examples of topics of our technical seminars Applications Benefits space saving, energy efficient electronic systems. Our power - SiC chips and their application specific advantages SemiSel is the SEMIKRON online calculation and simulation tool The risk arising from variations in both component and electrical for losses, temperatures and optimal choice of power electronic circuit parameters should be considered in proper circuit design. components (www.semikron.com). The days when a module These facts are only a few of the many points that need to be was purchased solely on the basis of its nominal current are over. considered when developing a power electronics system. And Today, increased product diversity in the field of power semicon- this is where efficient support is provided by SemiSel to enable ductors calls for comparisons beyond the information contained developers to make the right decision. SemiSel is still the most in data sheets. Only a comparison under application-oriented comprehensive free tool of its kind that can be used to investi- conditions, such as voltage level, switching frequency or cooling gate different power electronic circuits under different operating conditions, can demonstrate differences in the performance of conditions. modules are the heart of modern, energy efficient motor drives and industrial automation systems. Also in the areas of power supplies, the production of renewable energy and electric - Three level topology - circuits, protection concepts, application areas commercial vehicles our products set the way to reduce global - Reliability and service life of power modules energy consumption. Our success is based on the close coope- - Loss calculation, thermal resistance, module dimensioning ration and the technical dialogue of our application engineers and product managers with our customers. - IGBT driver circuits - Parallel connection of power modules This close partnership is also reflected in our practical range - Simulation tool SEMISEL the devices available. Miniaturisation combined with higher po- of technical seminars and roadmap workshops which cover - Typical problems in inverter design wer densities makes it essential to get information about device This programme has been available online since 2001, and it has losses and temperatures to specify requirements for a cooling been continually improved and expanded since its introduction. system at an early state of product development. It provides a good compromise of user-friendliness, applications all relevant topics of our product scope and application areas. We cordially invite you to our seminars and workshops. - Motor drives - topologies, challenges, trends - Solar inverters - topologies, challenges, trends sal for nominal operating conditions to drivers and heat sink spe- - Wind inverters - topologies, challenges, trends cifications and product selections for specific overload conditions - Fault analysis of power semiconductors Further information: www.semikron.com/technical-seminars 196 SEMIKRON and speed. The calculation functions range from product propo- - UPS inverters - topologies, challenges, trends and complex calculations, such as complete load cycles that take into account temperature cycling problems. Further information: www.semikron.com/semisel SEMIKRON 197 Motor Drives SKiN® Technology Converters for all types of electric motors utilized in industry. SEMIKRON power LINES Technologies CLASSES Applications SKiN Technology is free of bond wires and does not use solder or thermal paste. semiconductors help to maximize efficiency in any 2 or 4-quadrant drive or servo. Wind Energy With power semiconductors in the converters or in the drives controlling blade pitch, SKiNTER Technology The SKiNTER Technology utilises a cold-welded silver layer instead of solder between DCB and chip. Hence, the module is solder-free. nearly one in every two wind turbines in the world is fitted with SEMIKRON power modules. Solar Energy SPRiNG Technology The SPRiNG Technology utilises springs to establishthe contacts to the PCB. It is the best choice for fastest assembly and when field reliability in harsh environments is critical. With focus on cost and efficiency in photo voltaic systems, SEMIKRON has products serving the complete spectrum from micro inverters and medium power multi string to Mega Watt central inverters. SKiiP® Technology Semikron’s SKiiP Technology utilises spring loaded mechanical and electrical contacts Utility Vehicles Power electronics forms the heart of any electric vehicle. SEMIKRON’s solder-free semiconductor modules and systems are particularly well suited to the robust needs of today’s vehicles. and features a compact and durable module construction. PRESS-FIT Technology Alternative concept to Solder Mounting of module and PCB. The solder free solution ensures easy and fast assembly to the PCB in a single step reducing assembly time. Power Quality PFC, AVC and UPS systems ensure a clean reliable mains supply is kept available to critical applications. SEMIKRON power modules are at the heart of critical power systems. SOLDER Technology The proven interface for power modules. Solder pins are used in a broad range of applications worldwide offering a robust interface. Solder processes are widely used and easy to implement. Power Supplies In electro technology and medical diagnostics power semiconductors at the mains input facilitate and improve processes and save energy. SCREW Technology The standard interface to the power terminals for medium and high power modules. Easy to use and robust power interface to AC and DC terminals. Urban Transport Equipment Electrical transportation applications demand high reliability of the drive systems with their cyclic operating profile and the continuous auxiliary supplies over years of operation. 198 SEMIKRON SEMIKRON 199 Available in German, English, Chinese and Japanese Power Semiconductors LINES Abbreviations CLASSES Application Manual Acronym English Acronym English Eoff Energy dissipation during turn-off Rth(c-s) Thermal resistance case to heat sink Eon Energy dissipation during turn-on Rth(j-a) Thermal resistance junction to ambient Err Energy dissipation during reverse recovery (diode) Rth(j-c) Thermal resistance junction to case f Operating frequency Rth(j-s) Thermal resistance junction to sink fmax Maximum frequency Rth(s-a) Thermal resistance heat sink to ambient IC Continuous collector current Tc Case temperature ICnom Nominal collector current Tj Junction temperature ID Direct output current (of a rectifier connection) tq Circuit commutated turn-off time (thyristor) ID Continuous drain current (MOSFET) Ts Heatsink temperature IF Forward current (actual value) Vair/t Air flow IFAV Mean forward current VCE Collector-emitter voltage IFSM Surge forward current VCEsat Collector-emitter saturation voltage IGT Minimum guaranteed gate trigger current VDRM Repetitive peak off-state voltage IoutPEAK Output peak current (driver) VDS Drain-source voltage Ioverload Overload current for a specified time VF Forward voltage iT On-State current (instantaneous value) VG(off) Turn-off gate voltage level (driver) ITAV Mean on-state current VG(on) Turn-on gate voltage level (driver) ITSM Surge on-state curren VGT Gate trigger voltage Vin Input voltage IGBT´s and MOSFET´s integrated in power modules are the key The Application Manual contains detailed application-related Qout/pulse Output charge per pulse (Driver) components of power electronic circuits today and are conti- information on electrical configuration under important ope- nuously finding their way into new fields of application. This goes Reverse recovery charge Visol(IO) Isolation test voltage (r.m.s. /1 min.) input-output (driver) rating conditions, driver and protection elements for semicon- Qrr hand in hand with the ever increasing call for line rectifier diodes ductors, thermal dimensioning and cooling, tips on parallel and RDS(on) Drain-source on-resistance (MOSFET) VRRM Repetitive peak reverse voltage and thyristors as a cost effective way of connecting the circuits series connection, assembly tips for optimized power layouts with rT VT On-state voltage (Thyristor) to the power grid. The aim of the application manual is to provi- regard to parasitic elements and the requirements arising from On-state slope resistance, forward slope resistance (Thyristor) W Weight de users with support in selecting and using such devices. specific ambient conditions. The manual contains basic background knowledge on semicon- This book is written for users and provides help with component ductors in order to enable a better understanding of application selection and design-in work. It couples a vast wealth of possibilities and limits. More in-depth explanations are given on experience with detailed practical knowledge, the result being packaging and assembly technologies, because of the major a vast pool of information which up till now has been spread influence they have on module properties and limitations in field across various individual articles or in the minds of experts only. applications. Statements on reliability data, life cycle analyses The second revised edition is published in 2015. and key test processes round off the chapter. The Application Manual also explains the structure of datasheets and provides notes to help users better understand datasheet parameters. Further information: www.semikron.com/application-manual „465 pages of acquired knowledge“ 200 SEMIKRON Note All data and information referred to in this data book are based on the best of our knowledge and state-of-the-art technology available at the time of printing and are intended to be used for information purposes only. Component specifications are not to be considered a guarantee of component characteristics. The use of SEMIKRON products in life-support appliances and systems is subject to prior specification and written approval by SEMIKRON. All product specifications and terms of delivery are subject to change. For updates of our datasheets as well as information on our latest products, please refer to www.semikron.com. Sales and delivery of SEMIKRON products are subject to our “General Terms and Conditions of Sale”. Please refer to www.semikron.com for applicable power semiconductor standards. Reproduction permission may be granted on request on condition that the source is cited. Modifications to any and all data published by SEMIKRON are expressly prohibited. All product specifications and promotion statements apply to SEMIKRON International GmbH and all SEMIKRON companies within the SEMIKRON group. Printed in Germany © by SEMIKRON International GmbH, 05/2014 © Photos by SEMIKRON International GmbH, Tilman Weishart Photography; additional: Stockfotos from fotolia, istockfoto, shutterstock and getty images. SEMIKRON 201 Online Shop SEMIKRON Online Shop Global Direct Sales SEMIKRON Online Shop China Direct Sales SEMIKRON Elektronik GmbH & Co. KG Sigmundstr. 200 90431 Nuremberg Germany Phone : +49 911 6559 6663 Fax : +49 911 3091 9771 00 E-mail : [email protected] shop.semikron.com Online Shop Zhuhai SindoPower Electronics Company Limited Unit 3, Ground Floor, 2#, Manufacturing Centre , No. 1 Software Road 519080 Zhuhai, Guangdong China LINES Contact Asia CLASSES Contact Africa Phone : +86 756 3396 619 Fax : +86 756 3396 677 E-mail : [email protected] www.sindopower.cn South Africa Distributor 202 SEMIKRON Semiconductor Solutions Pty. Ltd. Route 21, Corporate Park, Cnr Regency/Sovereign Sts 62 Irene, Centurion South Africa Phone : +27 12 345 6060 Fax : +27 12 345 6070 E-mail sales : [email protected] www.semiconduct.co.za China Main site SEMIKRON Electronics (Zhu Hai) Co. Ltd. Unit 1, Ground Floor, 2#, Unit 2,4,5,7, Ground Floor, 5# , Manufacturing Centre, No. 1 Software Road 519080 Zhuhai, Guangdong China Phone : +86 756 3396 707 Fax : +86 756 3396 773 E-mail sales : [email protected] E-mail jobs : [email protected] www.semikron.com Branch office SEMIKRON Shanghai Room 1603, East Building, Greenland Riverside International Center, No.596 Middle Longhua Road, Xuhui District 200032 Shanghai China Phone : +86 215 4362 988 Fax : +86 215 4363 998 E-mail sales : [email protected] E-mail jobs : [email protected] www.semikron.com Branch office SEMIKRON Beijing Room 1603, Building A, Chengjian Plaza, No. 18 Beitaipingzhuang Road, Haidian District 100088 Beijing China Phone : +86 108 2255 398 Fax : +86 108 2255 836 E-mail sales : [email protected] E-mail jobs : [email protected] www.semikron.com Branch office SEMIKRON Shenzhen Room 13C, Golden Century, No. 6033 ShenNan Road, Futian District 518040 Shenzhen China Phone : +86 755 8256 2866 Fax : +86 755 8345 8937 E-mail sales : [email protected] E-mail jobs : [email protected] www.semikron.com Distributor HK China Group Limited (East) News Road, Futian District, East Wing, 1 Electric Razor Information Building, 1717-1721, Room 1717, East Block 510800 Shenzhen China Phone : + 86 755 8373 3223 Fax : +86 755 8373 3798 E-mail : [email protected] Distributor Semcor (Qingdao) Electronic Co., Ltd. No. 192 Zhuzhou Rd., Hi-Tech Park Qingdao China Phone : +86 532 8870 1773 Fax : +86 532 8870 1478 E-mail : [email protected] Distributor Weltronics Component Rua De Pequlm No. 244-246, Edificio Macau Finance Centre 10 Andar F, Macau China Phone : +853 2485 4306 Distributor Weltronics Component Limited Rm 611-622, 6/F., Chang Ping Commercial Bldg., 99 Hong Hua Road, Futian Free Trade Zone 518038 Shenzhen China Phone : +86 755 8348 0330 Fax : +86 755 8348 0105 E-mail : [email protected] SEMIKRON 203 Online Shop SEMIKRON Online Shop Global Direct Sales SEMIKRON Online Shop Global Direct Sales SEMIKRON Elektronik GmbH & Co. KG Sigmundstr. 200 90431 Nuremberg Germany Phone : +49 911 6559 6663 Fax : +49 911 3091 9771 00 E-mail : [email protected] shop.semikron.com Online Shop Hong Kong SAR of China 204 SEMIKRON Elektronik GmbH & Co. KG Sigmundstr. 200 90431 Nuremberg Germany LINES Contact Asia CLASSES Contact Asia Phone : +49 911 6559 6663 Fax : +49 911 3091 9771 00 E-mail : [email protected] shop.semikron.com India Main site SEMIKRON (HONG KONG) CO. Ltd. Unit 403A, 4th Floor, Golden Centre, 188 Des Voeux Road Central Hong Kong SAR of China Phone : +852 3426 3366 Fax : +852 3426 3399 E-mail sales : [email protected] E-mail jobs : [email protected] www.semikron.com Main site SEMIKRON Electronics Private Limited EL 87, TTC Industrial Area, Electronic Zone, Mahape 400701 Navi Mumbai India Phone : +91 22 2762 86 00 Fax : +91 22 27 6168 17 E-mail sales : [email protected] E-mail jobs : [email protected] www.semikron.com Distributor Crypson Electronics (HK) Co. Ltd 11/F, Wang Cheong Enterprises, Centre, 69 Chai Wan Kok St Tsuen Wan Hong Kong SAR of China Phone : 010 65189830 205 Fax : 010 656447 1582 Distributor Airmaster Rectifiers Pvt. Ltd. G78, Triveni Commercial Complex, Sheikh Sarai Phase - 1 110017 New Delhi India Phone : +91 11 4131 5934 Fax : + 49 11 2386 1508 E-mail : [email protected] E-mail alternative [email protected] Distributor FREEMAN Industrial Supplies Co. Flat C,10/F, China Fen Hin, Building, 5 Cheung Yue Street Cheung Sha Wan, Kowloon Hong Kong SAR of China Phone : +852 2365 3231 Fax : +852 2365 0476 E-mail : [email protected] Distributor Ghosh & Co. 171/C, Lenin Sarani 700013 Kolkata India Phone : +91 33 2212 8727 Fax : +91 33 2212 8727 E-mail : [email protected] Distributor Distributor Richardson RFPD Hong Kong Limited 20th Floor, Tower 2, 88 Container Port Road, Ever Gain Plaza, Kwai Chung Kwai Tsing Hong Kong SAR of China Phone : + 86 755 8294 3736 INNOVA ENTERPRISES Sr No-81, Plot No-3/2, Nda Khadakwasla Road, Shivane 411023 Pune India Phone : +91 20 2529 0077 Phone alternative : +91 20 2529 1177 Fax : +91 20 2529 2188 E-mail : [email protected] Distributor Premier Controls 122, 1st Floor, Valluvar Kottam High Rd 600034 Chennai India Phone : +91 44 2825 8882 Fax : +91 44 2827 4307 E-mail : [email protected] Distributor Rectifier House (India) Pvt. Limited 101, 1st Floor, Munani Trade Centre, near Model CO-OP Bank, Waliv Phata 401208 Mumbai India Phone : +91 99 3059 6249 Fax : +91 22 2386 1262 E-mail : [email protected] Distributor S.V. ELECTRONICS 135, 1st Floor, Archana Arcade, Behind Hotel Ramakrishna 500025 Secunderabad India Distributor V V ELECTROTECH 113, Saffron Complex, Fatehgunj Circle, Fatehgunj 390002 Vadodara India SEMIKRON Phone : +91 40 2782 1970 Phone alternative : +91 40 2782 1971 Fax : +91 40 2782 3696 E-mail : [email protected] Phone : +91 265 2786781 Phone alternative : +91 265 2788438 Fax : +91 265 2788438 E-mail : [email protected] SEMIKRON 205 Online Shop SEMIKRON Online Shop Global Direct Sales SEMIKRON Online Shop Global Direct Sales SEMIKRON Elektronik GmbH & Co. KG Sigmundstr. 200 90431 Nuremberg Germany Phone : +49 911 6559 6663 Fax : +49 911 3091 9771 00 E-mail : [email protected] shop.semikron.com Online Shop Japan 206 SEMIKRON Elektronik GmbH & Co. KG Sigmundstr. 200 90431 Nuremberg Germany LINES Contact Asia CLASSES Contact Asia Phone : +49 911 6559 6663 Fax : +49 911 3091 9771 00 E-mail : [email protected] shop.semikron.com South Korea Main site SEMIKRON K. K. Sarugakucho Kikuhide Bldg. 4F, 2-8-4 Sarugakucho, Chiyodaku 101-0064 Tokyo Japan Phone : +81 3 6895 1396 Fax : +81 3 6895 5078 E-mail sales : [email protected] E-mail jobs : [email protected] www.semikron.com Main site SEMIKRON Co. Ltd. 9, Sosam-ro36beon-gil, Sosa-gu Bucheon-si 422-233 Gyeonggi-do South Korea Phone : +82 323 462 830 Fax : +82 323 462 834 E-mail sales : [email protected] E-mail jobs : [email protected] www.semikron.com Main site SEMIKRON Osaka branch office Daitaku17 bldg 6F, 4-13-22 Nishi-Nakajima, Yodogawa-ku 532-0011 Osaka Japan Phone : +81 6 6305 3299 Fax : +81 6 6305 3560 www.semikron.com Distributor RAON Device 5072, Poong Lim Plaza, Si-Heung City Gyeonggi-do South Korea Phone : +82 505 306 3079 Fax : +82 505 309 3079 E-mail : [email protected] Distributor NADEX CO., LTD. 9-27 Furuwatari-cho, Naka-ku, Nagoya City, Aichi 460-8338 Nagoya Japan Phone : +81 5 2322 3511 Fax : +81 5 2332 4324 Distributor TOKYO ELECTRON DEVICE LIMITED Yokohama East Square 1-4, Kinko-cho, Kanagawa-ku, Yokohama City, Kanagawa 221-0056 Yokohama Japan Phone : +81 4 5443 4000 Fax : +81 4 5443 4050 Distributor EICH Corporation 5F, KDX Nishi Shinjuku Bldg., 7-22-45, Nishi Shinjuku, Shinjuku-ku 160-0023 Tokyo Japan Phone : +81 3 5348 7716 Fax : +81 3 5348 4145 Distributor KTL Corporation 6F, Shimbashi i-Mark Building, 2-6-2, Shimbashi, Minato-ku 105-0004 Tokyo Japan Phone : +81 3 5521 2060 Fax : +81 3 5521 2157 Distributor Kenden Corporation Mita 43MT Building, 3-13-16 Mita, Minato-ku 108-0073 Tokyo Japan Phone : +81 3 3769 5311 Fax : +81 3 3769 5333 SEMIKRON Taiwan Main site SEMIKRON (HONG KONG) CO. Ltd. Taiwan Representative Office 8F, No. 32 Guang-zhou Street, Wanhua Dist. 108 Taipei City Taiwan Phone : +886 930 347 711 Fax : +886 282 820 403 E-mail : [email protected] www.semikron.com SEMIKRON 207 SEMIKRON Online Shop Global Direct Sales Online Shop SEMIKRON Elektronik GmbH & Co. KG Sigmundstr. 200 90431 Nuremberg Germany SEMIKRON Pty. Ltd. 8/8 Garden Road Clayton VIC 3168 Melbourne Australia LINES SEMIKRON Online Shop Global Direct Sales Phone : +49 911 6559 6663 Fax : +49 911 3091 9771 00 E-mail : [email protected] shop.semikron.com Online Shop Phone : +61 385 615 600 Fax : +61 395 618 769 E-mail sales : [email protected] E-mail jobs : [email protected] www.semikron.com Main site Australia & New Zealand Main site CLASSES Contact Europe Contact Australia & New Zealand SEMIKRON Elektronik GmbH & Co. KG Sigmundstr. 200 90431 Nuremberg Germany Phone : +49 911 6559 6663 Fax : +49 911 3091 9771 00 E-mail : [email protected] shop.semikron.com Austria SEMIKRON GmbH Hirschstettner Strasse 19-21 (Stg.I/EG-OE1) 1220 Wien Austria Phone : +43 158 6365 80 Fax : +43 158 6365 832 E-mail sales : [email protected] E-mail jobs : [email protected] www.semikron.com Belgium Main site Main site Flemish-speaking SEMIKRON Linie 502 7325 DZ Apeldoorn Netherlands French-speaking SEMIKRON S.A.R.L 130 route de Cormeilles, BP 70 78501 Sartrouville Cedex France Phone : +31 555 295 295 Fax : +31 555 295 290 E-mail sales : [email protected] E-mail jobs : [email protected] www.semikron.com Phone : +33 130 868 000 Fax : +33 139 151 083 E-mail sales : [email protected] E-mail jobs : [email protected] www.semikron.com Czech Republic Main site SEMIKRON s.r.o. Teslova 3 30100 Plzen Czech Republic Phone : +420 378 051 400 Fax : +420 378 051 401 E-mail sales : [email protected] www.semikron.com Distributor Semic Trade, s.r.o. Volutová 2521/18, Praha 5 158 00 Prague Czech Republic Phone : +420 251 551 204 E-mail : [email protected] Denmark Main site SEMIKRON AB Östra Köpmansgatan 18 44430 Stenungsund Sweden Phone : +46 303 816 16 Fax : +46 303 816 31 E-mail sales : [email protected] E-mail jobs : [email protected] www.semikron.com Finland Main site SEMIKRON OY Tuupakantie 3 01740 Vantaa Finland Phone : +358 103 217 950 Fax : +358 9870 1308 E-mail sales : [email protected] E-mail jobs : [email protected] www.semikron.com France Main site 208 SEMIKRON SEMIKRON S.A.R.L 130 route de Cormeilles, BP 70 78501 Sartrouville Cedex France Phone : +33 130 868 000 Fax : +33 139 151 083 E-mail sales : [email protected] E-mail jobs : [email protected] www.semikron.com SEMIKRON 209 SEMIKRON Online Shop Global Direct Sales Online Shop SEMIKRON Elektronik GmbH & Co. KG Sigmundstr. 200 90431 Nuremberg Germany Phone : +49 911 6559 6663 Fax : +49 911 3091 9771 00 E-mail : [email protected] shop.semikron.com Germany Main site Phone : +49 911 6559 0 Phone sales : +49 911 6559 6663 Phone purchase : +49 911 6559 6767 Phone jobs : +49 911 6559 460 Fax : +49 911 6559 262 E-mail sales : [email protected] E-mail jobs : [email protected] www.semikron.com SEMIKRON, Technisches Büro Südwest, Karlsruhe Dipl.-Ing. (FH) Thomas Birnbreier Guntherstr. 1 76297 Stutensee Germany Phone : +49 724 4720 819 Phone alternative : +49 160 8830 497 Fax : +49 724 4720 824 E-mail : [email protected] www.semikron.com SEMIKRON, Technisches Büro Solutions Solar, Mannheim Dipl.-Ing. Walter Schmidt Carl-Orff-Str. 9 69488 Birkenau-Herrenwiese Germany Phone : +49 620 1393 090 Phone alternative : +49 171 3000 289 Fax : +49 911 6559 775 97 E-mail : [email protected] www.semikron.com Technical Offices SEMIKRON, Technisches Büro Süd, Schnaittenbach Dipl.-Ing. (FH) Manfred Schlosser Bachwiesen 10 92253 Schnaittenbach Germany Phone : +49 962 2704 980 Phone alternative : +49 160 5372 270 Fax : +49 962 2704 979 E-mail : [email protected] www.semikron.com Technical Offices SEMIKRON, Technisches Büro Vertrieb leistungselektr. Systeme Dipl.-Ing. Reinhard Stark Klobenmuehle 2 91456 Diespeck Germany Phone : +49 916 1873 750 Phone alternative : +49 171 7680 654 Fax : +49 916 1873 751 E-mail : [email protected] www.semikron.com SEMIKRON, Technisches Büro West-Mitte, Wiesbaden Jörg Jung Schönbornstr. 4 65439 Flörsheim Germany Phone : +49 614 5540 708 Phone alternative : +49 160 8986 557 Fax : +49 911 6559 775 61 E-mail : [email protected] www.semikron.com Technical Offices SEMIKRON, Technisches Büro Business Development Solutions Dipl.-Ing. Udo Heinrich Postfach 1155 65219 Taunusstein Germany Phone : +49 612 8748 4800 Phone alternative : +49 170 7050 239 Fax : +49 911 6559 775 01 E-mail : [email protected] www.semikron.com Distributor Arrow Central Europe GmbH Frankfurter Straße 211 63263 Neu-Isenburg Germany Phone : +49 6102 5030 0 Fax : +49 6102 5030 8455 Technical Offices Technical Offices Technical Offices 210 SEMIKRON Elektronik GmbH & Co. KG / SEMIKRON INTERNATIONAL GmbH Sigmundstr. 200 90431 Nuremberg Germany SEMIKRON LINES Italy Main site SEMIKRON S.r.l. via Laurentina km 24,200 40 Pomezia Italy Phone : +39 069 114 241 Fax : +39 069 1142 4711 E-mail sales : [email protected] E-mail jobs : [email protected] www.semikron.com Main site SEMIKRON S.r.l. Via Mecenate 76/22 20138 Milano Italy Phone : +39 0250 1130 Fax : +39 0691 1424 711 E-mail sales : [email protected] E-mail jobs : [email protected] www.semikron.com Distributor Bongiorno Srl Via Galvani 9 35030 Rubano PD Italy Phone : +39 049 8974236 Phone alternative : +39 049 8974588 Fax : +39 049 8974240 E-mail : [email protected] Distributor TOTEM ELECTRO SRL Viale Lombardia 66 20131 Milano Italy Phone : +39 02 2885111 Fax : +39 02 28851150 E-mail : [email protected] CLASSES Contact Europe Netherlands Main site SEMIKRON B.V. Linie 502 7325 DZ Apeldoorn Netherlands Phone : +31 555 295 295 Fax : +31 555 295 290 E-mail sales : [email protected] E-mail jobs : [email protected] www.semikron.com Poland Main site SEMIKRON Sp. z o.o. ul. Pozaryskiego 28 04-703 Warszawa Poland Phone : +48 226 157 984 Fax : +48 226 133 887 E-mail sales : [email protected] E-mail jobs : [email protected] www.semikron.com Russia Main site Semikron Ltd. Gabrichevskogo Str. 5; Building 1 125367 Moscow Russia Phone : +7 812 2329 825 Fax : +7 812 2329 825 E-mail : [email protected] E-mail jobs : [email protected] www.semikron.com Technical Office SEMIKRON Ltd. B. Pushkarskaya 41 197101 Sankt Petersburg Russia Phone : +7 812 2329 825 Fax : +7 812 2329 825 E-mail : [email protected] E-mail jobs : [email protected] www.semikron.com Distributor COMPEL JSC 1/2 Derbenevskaya Str., Bldg. 1 115114 Moscow Russia Phone : +7 495 234 7762 Fax : +7 495 234 7763 Distributor Corporation IP Ltd. 131, Plakhotnogo Str. 630136 Novosibirsk Russia Phone : +7 383 217 4435 Fax : +7 383 249 3439 New Technologies Co., Ltd 20, Karl Marx Avenue, NSTU 630073 Novosibirsk Russia Phone : +7 383 315 3177 Fax : +7 383 346 4844 E-mail : [email protected] www.ntcom.ru Distributor Serbia Distributor VREMEPLOV d.o.o. Vidikovacki Venac 104g, Lokal 75 11137 Beograd Serbia Phone : +381 11 265 3685 Fax : +381 11 265 3618 E-mail : [email protected] Slovakia Main site SEMIKRON s.r.o. Steruská ul. 3 92203 Vrbové Slovakia Phone : +420 378 051 400 Fax : +420 378 051 401 E-mail sales : [email protected] E-mail jobs : [email protected] www.semikron.com SEMIKRON 211 Online Shop SEMIKRON Online Shop Global Direct Sales SEMIKRON Online Shop Global Direct Sales SEMIKRON Elektronik GmbH & Co. KG Sigmundstr. 200 90431 Nuremberg Germany Phone : +49 911 6559 6663 Fax : +49 911 3091 9771 00 E-mail : [email protected] shop.semikron.com Online Shop Phone : +386 1 256 1381 Fax : +386 12 256 3870 E-mail : [email protected] Main site ALMA Electronic d.o.o. Leskoskova Cesta 6 1000 Ljubljana Slovenia Spain Main site SEMIKRON ELECTRONICS S.L. C/ de la Ciencia, 35, Nave 3 8850 Gavá Spain Phone : +34 936 335 890 Fax : +34 936 333 065 E-mail sales : [email protected] E-mail jobs : [email protected] www.semikron.com Phone : +46 303 816 16 Fax : +46 303 816 31 E-mail sales : [email protected] E-mail jobs : [email protected] www.semikron.com Technical Offices Switzerland Main site SEMIKRON AG Industriestrasse 19 8304 Wallisellen Switzerland Phone : +41 449 141 333 Fax : +41 449 141 330 E-mail sales : [email protected] E-mail jobs : [email protected] www.semikron.com Technical Offices Turkey Main site Distributor SEMIKRON Esentepe Mah. Milangaz cad. no.77, Dumankaya Vizyon Rezidans, A1-Blok Daire 46 34870 Kartal/Istanbul Turkey Phone : +90 216 5115 046 Phone alternative : +90 532 5088 500 Fax : +90 216 5115 846 E-mail : [email protected] www.semikron.com ELSE ELEKTRIK MAKINA SANAYI VE TICARET A.S. Cihangir Mah. Kargaci Sok. No:5, Avcılar TR-34310 Istanbul Turkey Phone : +90 212 4226670 Fax : +90 212 4226679 E-mail : [email protected] Distributor TECHNOSERVICEDRIVE LTD. Zheludewstr. 1D, OF.8 252148 Kiew Ukraine Phone : +380 44 454 2462 Phone alternative : +380 44 458 4766 E-mail : [email protected] United Kingdom Main site Distributor 212 SEMIKRON SEMIKRON Ltd. 9 Harforde Court, John Tate Road, Foxholes Business Park SG13 7NW Hertford United Kingdom RS Components Ltd. Weldon Industrial Estate, Birchington Road NN17 9RS Corby United Kingdom Technical Offices Technical Offices Ukraine Phone : +44 199 2584 677 Fax : +44 199 2503 837 E-mail sales : [email protected] E-mail jobs : [email protected] www.semikron.com Phone : +44 153 6201 201 SEMIKRON DE MEXICO S.A. de C.V. Ave Morelos No. 28, Col. Parque Industrial Naucalpan de Juárez C.P. 53470 Estado de México Mexico Phone : +52 555 3001 151 Phone alternative : +52 555 3007 922 Fax : +52 555 3000 364 E-mail sales : [email protected] www.semikron.com United States Main site Sweden SEMIKRON AB Östra Köpmansgatan 18 44430 Stenungsund Sweden Phone : +49 911 6559 6663 Fax : +49 911 3091 9771 00 E-mail : [email protected] shop.semikron.com Mexico Slovenia Distributor SEMIKRON Elektronik GmbH & Co. KG Sigmundstr. 200 90431 Nuremberg Germany LINES Contact North America CLASSES Contact Europe Technical Offices Distributor SEMIKRON Inc. 11 Executive Drive NH 03051 Hudson United States North (MA, CT, NH, VT, RI, ME, Eastern NY, Eastern Canada) SEMIKRON, Regional Sales Office Tom Rantala United States West (UT, WY, ID, MT, WA, OR, CA, NV, AZ, Canada: BC, AB, SK, MB) SEMIKRON, Regional Sales Office Kevin Monohan United States North East (PA, NJ, MD, DE, WV, VA, West NY, Toronto, Long Island NY) SEMIKRON, Regional Sales Office Paul Moore United States South Central (TX, OK, AR, LA, KS, CO, NM) SEMIKRON, Regional Sales Office Emiliano Meza United States South East and East Central (NC, SC, GA, TN, AL, MS, FL, OH, IN, KY) SEMIKRON, Regional Sales Office Bruce Dickinson United States Richardson RFPD 1950 S. Batavia Avenue, Suite 100 60134 Geneva United States Phone : +1 603 8838 102 Fax : +1 603 8838 021 E-mail sales : [email protected] E-mail jobs : [email protected] www.semikron.com Phone : +1 603 9307 834 Fax : +1 603 8838 021 E-mail : [email protected] www.semikron.com Phone : +1 425 7375 060 Fax : +1 603 8838 021 E-mail : [email protected] www.semikron.com Phone : +1 267 8648 451 Fax : +1 603 8838 021 E-mail : [email protected] www.semikron.com Phone : +1 940 231 3491 Phone alternative : +1 603 883 1533 Fax : +1 603 8838 021 E-mail : [email protected] www.semikron.com Phone : +1 336 7074 138 Fax : +1 603 8838 021 E-mail : [email protected] www.semikron.com Phone : +1 630 208 2437 E-mail : [email protected] SEMIKRON 213 LINES CLASSES Contact South America Argentina Online Shop Global Direct Sales SEMIKRON Elektronik GmbH & Co. KG Sigmundstr. 200 90431 Nuremberg Germany Phone : +49 911 6559 6663 Fax : +49 911 3091 9771 00 E-mail : [email protected] shop.semikron.com Brazil Main site SEMIKRON Semicondutores Ltda. Av. Inocêncio Seráfico, 6300 06366-900 Carapicuiba - Sao Paulo Brazil Phone : +55 11 4186 9500 Fax : +55 11 4186 3567 E-mail sales : [email protected] E-mail jobs : [email protected] www.semikron.com Online Shop Brazilian Direct Sales SEMIKRON Semicondutores Ltda. Av. Inocêncio Seráfico, 6300 06366-900 Carapicuiba - Sao Paulo Brazil Phone : +55 11 4186 9500 Fax : +55 11 4186 3567 E-mail : [email protected] E-mail jobs : [email protected] www.sindopower.com.br Chile Online Shop Global Direct Sales SEMIKRON Elektronik GmbH & Co. KG Sigmundstr. 200 90431 Nuremberg Germany Phone : +49 911 6559 6663 Fax : +49 911 3091 9771 00 E-mail : [email protected] shop.semikron.com Colombia Online Shop Global Direct Sales SEMIKRON Elektronik GmbH & Co. KG Sigmundstr. 200 90431 Nuremberg Germany Phone : +49 911 6559 6663 Fax : +49 911 3091 9771 00 E-mail : [email protected] shop.semikron.com Ecuador Online Shop Global Direct Sales SEMIKRON Elektronik GmbH & Co. KG Sigmundstr. 200 90431 Nuremberg Germany Phone : +49 911 6559 6663 Fax : +49 911 3091 9771 00 E-mail : [email protected] shop.semikron.com Peru Online Shop Global Direct Sales SEMIKRON Elektronik GmbH & Co. KG Sigmundstr. 200 90431 Nuremberg Germany Phone : +49 911 6559 6663 Fax : +49 911 3091 9771 00 E-mail : [email protected] shop.semikron.com Uruguay Online Shop Global Direct Sales SEMIKRON Elektronik GmbH & Co. KG Sigmundstr. 200 90431 Nuremberg Germany Phone : +49 911 6559 6663 Fax : +49 911 3091 9771 00 E-mail : [email protected] shop.semikron.com Venezuela Online Shop 214 SEMIKRON Global Direct Sales SEMIKRON Elektronik GmbH & Co. KG Sigmundstr. 200 90431 Nuremberg Germany Phone : +49 911 6559 6663 Fax : +49 911 3091 9771 00 E-mail : [email protected] shop.semikron.com SEMIKRON 215 LINES CLASSES de.linkedin.com/company/semikron SEMIKRON International GmbH Sigmundstrasse 200 SEMIKRON International GmbH 90431 Nuremberg, Germany Sigmundstrasse 200 Tel: +49 911 6559 6663 90431 Nuremberg, Germany Fax:+49 Tel: +49 911 911 6559 6559262 234 [email protected] Fax:+49 911 6559 262 [email protected] www.semikron.com shop.semikron.com www.semikron.com Note: All information is based on our present knowledge and is to be used for information purposes only. The specifications of our components may not be considered as an assurance of component characteristics. www.youtube.com/c/semikron 05/2016 www.semikron.com/contact shop.semikron.com 11 29 05 00 We are close to our customers 1. 2. Interactive Surfaces for Document Navigation 1. Lines 2. Classes 3. Chapter marks 4. Content 5. Turn the page Link to the SEMIKRON Homepage 6. Web-addresses 6. 5. 7. Online-shop icon 1. 2. 5. 4. 1. 2. 4. 3. 5. 5. 5. 6. 3. 5.