Vincotech Power Modules Catalog Content Introduction Applications Overview Topology/Housing Overview Topology/Application 4 5 6-7 8-9 PIM PIM with PFC IPM Sixpack Halfbridge H-Bridge Rectifier PFC Solar Topologies Booster NPC 10 - 16 16 - 17 17 18 - 22 22 - 24 24 - 25 26 27 28 29 30 - 31 Housing Dimensions MiniSKiiP® Options Phase Change Material Press-fit Technology Description – Naming System Simulation Software (ISE) 32 - 38 39 40 41 42 43 3 Introduction Vincotech develops and manufactures subsystems as well as electronic modules and offers manufacturing services geared to help customers to master complex challenges in electronics integration. With approximately 500 employees worldwide, backed by vast experience and a long history in electronics integration, Vincotech leverages these assets to help customers achieve maximum market success. Vincotech is one of the market leaders in power modules. Target applications include motor drives, solar inverters, welding equipment, and power supplies. With 13 different standard housings and more than 35 standard product families, Vincotech offers a wide power range using different topologies. The products include Power Integrated Modules (combination of input rectifier, inverter and brake chopper), Sixpack Inverter Modules, Rectifier Modules, PFC-, H-Bridge, Half-Bridge Modules, Booster and NPC Converter Modules. Vincotech covers a broad power spectrum, ranging from 5A to 450A at 600V and 1200V. 4 Applications Vincotech power modules are used for a broad range of different applications. The most common solutions available by Vincotech are described below. The icons are also shown on each module description to indicate for which applications a module can be utilized. Industrial Drives Standard drive applications for industrial use with power range from 1 to 60kW. Topologies are Power Integrated Modules (PIM, rectifier, inverter, and brake), Sixpacks (3 phase inverters), Halfbridge and Rectifier Modules. Embedded Drives Integrated drive applications for industrial and home appliances. Typically used in fans, air conditioning, pumps, power tools, washing machines, and refrigerators. Solutions are Intelligent Power Modules (IPM), Power Integrated Modules with embedded PFC (Power Factor Correction) circuit, and Rectifier Modules with PFC. Solar Inverters Inverter applications for solar power systems. Transformerless and -based inverters with 1- and 3-phase outputs. Special topologies like asymmetric H-bridge, Neutral Point Clamped (NPC) inverters, parallel and symmetric boosts for high efficiency. For systems with overall power up to 200kW. Uninterruptable Power Supplies (UPS) Power components for UPS applications. Modules for AC/DC and DC/AC power conversion. Topologies like 1- and 3-phase rectifiers, halfbridges, H-bridges, boosters, and NPCs. Power ranges up to 200kW. Welding Solutions for industrial welding applications, fast switching Half- and H-Bridges, PFC and Rectifier topologies. Special modules for zero switching (ZVS) applications, with improved thermal resistance (Rth), or internal DC link capacitors for lower turn-off losses. Power Supplies Power components typically used in power supply applications. Modules with topologies like rectifiers, PFC switches (single, dual, and interleaved), boost circuits (step-up and step-down), Halfbridges, and H-Bridges. 5 Overview Topology/Housing flow 0 flow 1 flow 1B flow 2 flow90 1 PIM flowPIM 0 (Page 10) flowPIM 0 + PFC (Page 16) flowPIM 1 (Page 11) flowPIM 1 + PFC (Page 17) fastPIM 1 H (Page 25) flowIPM 1B (Page 17) flowPIM 2 (Page 12) flowPACK 0 (Page 18) flowPACK 1 (Page 18) flowPACK 2 (Page 19) * Six-Pack flowSCREW 2 flowSCREW 3 MiniSKiiP® 1 MiniSKiiP® 2 MiniSKiiP® 3 flow90PIM 1 (Page 13) MiniSKiiP® 1 PIM (Page 13-14) MiniSKiiP® 2 PIM (Page 13-15) MiniSKiiP® 3 PIM (Page 15-16) flow90PACK 1 (Page 19) MiniSKiiP® 1 PACK (Page 20) MiniSKiiP® 2 PACK (Page 21) MiniSKiiP® 3 PACK (Page 22) * Half-Bridge flowPHASE 0 (Page 22) flowPHASE 2 (Page 23) flowPHASE 2s (Page 23) flowPHASE 3 (Page 24) * H-Bridge fastPACK 0 H (Page 24-25) * flow90CON 1 (Page 26) flowCON 0 (Page 26) Rectifier * PFC flowPFC 0 (Page 27) * Solar Topologies flowSOL 0 (Page 28) * Booster flowBOOST 0 (Page 29) * NPC * = Example 6 flowNPC 0 (Page 30) flowNPC 1 (Page 30) flowNPC 2 (Page 31) * 7 Overview Topology/Application Industrial Drives Embedded Drives PIM flowPIM (Page 10-13) MiniSKiiP® PIM (Page 14-16) flowPIM (Page 10-13) Solar Inverter UPS Welding Power Supplies fastPIM H (Page 25) fastPIM H (Page 25) * PIM + PFC flowPIM + PFC (Page 16-17) flowIPM 1B (Page 17) * Six-Pack flowPACK (Page 18-19) MiniSKiiP® PACK (Page 20-22) * Half-Bridge flowPHASE (Page 20-24) flowPHASE (Page 20-24) flowPHASE (Page 20-24) flowPHASE (Page 20-24) flowPHASE (Page 20-24) fastPACK H (Page 24-25) fastPACK H (Page 24-25) fastPACK H (Page 24-25) fastPACK H (Page 24-25) flowCON flowCON (Page 26) flowCON (Page 26) flowCON (Page 26) flowPFC (Page 27) flowPFC (Page 27) * H-Bridge * Rectifier flowCON (Page 26) flowCON * PFC flowPFC (Page 27) * Solar Topologies flowSOL (Page 28) * Booster flowBOOST (Page 29) flowBOOST (Page 29) flowNPC (Page 30-31) flowNPC (Page 30-31) flowBOOST (Page 29) * NPC * = Example 8 flowNPC (Page 30-31) flowNPC (Page 30-31) * 9 PIM flowPIM 0 3rd gen W W W W Trench Fieldstop Technology IGBT4 Low saturation losses Improved EMC behavior Optionally with enhanced rectifier and w/o brake Housing W flow 0 17 mm 2-clip W flow 0 12 mm 2-clip Part-No Voltage Current1) Options* V23990-P848-*-PM V23990-P849-*-PM V23990-P840-*-PM 1200V 1200V 1200V 4A 8A 15A A48: C48: A49: C49: A58: C58: A59: C59: std. rect., 12mm std. rect., 12mm, w/o std. rect., 17mm std. rect., 17mm, w/o enh. rect., 12mm enh. rect., 12mm, w/o enh. rect., 17mm enh. rect., 17mm, w/o brake brake brake brake flowPIM 0 2nd gen W W IGBT3 technology for low saturation losses Optionally with enhanced rectifier and w/o brake Housing W flow 0 17 mm 4-clip W flow 0 17 mm 2-clip W flow 0 12 mm 2-clip 1) Rated current of components 10 Part-No Voltage Current1) V23990-P541-*-PM V23990-P543-*-PM V23990-P544-*-PM V23990-P545-*-PM V23990-P546-*-PM V23990-P549-*-PM V23990-P540-*-PM 600V 600V 600V 600V 600V 1200V 1200V 6A 10A 15A 20A 30A 8A 15A Options* A20: A21: A28: A38: A39: std. rect., 17mm enh. rect., 17mm std. rect., 12mm enh. rect., 12mm enh. rect., 17mm 4-clip 4-clip C21: enh. rect., 17mm 4-clip, w/o brake 2-clip 2-clip C38: enh. rect., 12mm 2-clip, w/o brake 2-clip C39: enh. rect., 17mm 2-clip, w/o brake A: std. rect., 17mm 4-clip A01: enh. rect., 17mm 4-clip C01: enh. rect., 17mm 4clip, w/o brake flowPIM 1 3rd gen W W W Trench Fieldstop Technology IGBT4 Low saturation losses Optionally with enhanced rectifier and w/o brake Housing W flow 1 Part-No Voltage Current1) Options* V23990-P588-*41-PM V23990-P589-*41-PM V23990-P580-*41-PM V23990-P580-A46-PM V23990-P589-A31-PM 1200V 1200V 1200V 1200V 1200V 15A 25A 35A 35A 25A Part-No Voltage Current1) Options* V23990-P585-*-PM V23990-P586-*-PM V23990-P587-*-PM V23990-P588-*-PM V23990-P589-*-PM V23990-P580-*-PM 600V 600V 600V 1200V 1200V 1200V 30A 50A 75A 15A 25A 35A A: with brake C: w/o brake A41: with brake C41: w/o brake A46: with brake, improved Rth (AlN) with IGBT Phantom Speed (fsw > 8kHz) flowPIM 1 2nd gen W W W IGBT3 technology for low saturation losses Compact design with enhanced recitifier Optionally with or w/o brake Housing W flow 1 11 PIM flowPIM 2 3rd gen W W W IGBT4 (1200V) technology for low saturation losses and improved EMC behavior IGBT3 (600V) technology for low saturation losses Compact and low inductive design Housing W flow 2 Part-No Voltage Current1) V23990-P763-A-PM V23990-P764-A-PM V23990-P765-A-PM V23990-P767-A-PM V23990-P768-A-PM V23990-P769-A-PM V23990-P760-A-PM 600V 600V 600V 1200V 1200V 1200V 1200V 50A 75A 100A 35A 50A 75A 100A Comments Part-No Voltage Current1) Comments V23990-P516-C-PM V23990-P517-C-PM V23990-P518-C44-PM 1200V 1200V 1200V 8A 15A 25A IGBT phantom speed IGBT3 IGBT4 flowPIM 1 Fast W W Ultrafast IGBTs for reduced switching losses dedicated for fsw > 8kHz Typical applications: fans and pumps Housing W flow 1 1) Rated current of components 12 flow90PIM 1 W W W W IGBT3 technology for low saturation losses Supports designs with 90° mounting angle between heatsink and PCB Clip-in PCB mounting Clip or screw-on heatsink mounting Housing W flow90 1 Part-No Voltage Current1) Comments V23990-P631-A-PM 600V 8A V23990-P632-A-PM V23990-P633-A-PM V23990-P634-A-PM V23990-P635-A-PM V23990-P639-A-PM V23990-P630-A-PM 600V 600V 600V 600V 1200V 1200V 10A 15A 20A 30A 10A 15A Part-No Voltage Current1) Semikron Equivalent V23990-K209-A40-PM V23990-K200-A40-PM 1200V 1200V 8A 15A SKiiP 11NAB12T4V1 SKiiP 12NAB12T4V1 IGBT3 IGBT4 MiniSKiiP® 1 PIM IGBT4 W W Trench Fieldstop IGBT4 technology Solderless spring contact mounting system Housing W MiniSKiiP® 1 13 PIM MiniSKiiP® 1 PIM W W Trench Fieldstop IGBTs for low saturation losses Solderless spring contact mounting system Housing W MiniSKiiP® 1 Part-No Voltage Current1) Semikron Equivalent V23990-K201-A-PM V23990-K202-A-PM V23990-K203-A-PM V23990-K204-A10-PM V23990-K209-A-PM V23990-K200-A-PM V23990-K200-A10-PM 600V 600V 600V 600V 1200V 1200V 1200V 6A 10A 15A 20A 8A 15A 15A SKiiP 11 NAB 066 V1 SKiiP 12 NAB 066 V1 SKiiP 13 NAB 066 V1 SKiiP 14 NAB 066 V1 SKiiP 11 NAB 126 V1 SKiiP 12 NAB 126 V1 with high speed FRED Part-No Voltage Current1) Semikron Equivalent V23990-K229-A40-PM V23990-K220-A40-PM 1200V 1200V 25A 35A SKiiP 23NAB12T4V1 SKiiP 24NAB12T4V1 MiniSKiiP® 2 PIM IGBT4 W W Trench Fieldstop IGBT4 technology Solderless spring contact mounting system Housing W MiniSKiiP® 2 1) Rated current of components 14 MiniSKiiP® 2 PIM W W Trench Fieldstop IGBTs for low saturation losses Solderless spring contact mounting system Housing W MiniSKiiP® 2 Part-No Current1) Semikron Equivalent 600V 600V 30A 50A SKiiP 25 NAB 066 V1 SKiiP 26 NAB 066 V1 V23990-K229-A-PM V23990-K229-A10-PM V23990-K220-A-PM 1200V 1200V 1200V 25A 25A 35A SKiiP 23 NAB 126 V1 with high speed FRED SKiiP 24 NAB 126 V1 Part-No Voltage Current1) Semikron Equivalent V23990-K428-A40-PM V23990-K429-A40-PM V23990-K420-A40-PM 1200V 1200V 1200V 50A 75A 100A SKiiP 35NAB12T4V1 SKiiP 37NAB12T4V1 SKiiP 38NAB12T4V1 V23990-K222-A-PM V23990-K223-A-PM Voltage MiniSKiiP® 3 PIM IGBT4 W W Trench Fieldstop IGBT4 technology Solderless spring contact mounting system Housing W MiniSKiiP® 3 15 PIM MiniSKiiP® 3 PIM W W Trench Fieldstop IGBTs for low saturation losses Solderless spring contact mounting system Housing W MiniSKiiP® 3 Part-No Voltage Current1) Semikron Equivalent V23990-K242-A-PM V23990-K243-A-PM V23990-K249-A-PM V23990-K240-A-PM 600V 600V 1200V 1200V 75A 100A 50A 70A SKiiP SKiiP SKiiP SKiiP Part-No Voltage Current1) Options* V23990-P371-B10-PM V23990-P372-B10-PM V23990-P373-*-PM 600V 600V 600V 4A 6A 10A 37 38 35 38 NAB NAB NAB NAB 066 V1 066 V1 126 V1 126 V1 PIM with PFC flowPIM 0 + PFC W W W W PIM module with CoolMOS PFC inverter PFC switching frequency up to 200kHz Inverter part with IGBT3 technology Clip-in PCB mounting Housing W flow 0 17 mm 4-clip W flow 0 17 mm 2-clip 1) Rated current of components 16 B10: 4-clip housing B17: 4-clip housing, w/o PFC shunt B19: 2-clip housing flowPIM 1 + PFC W W W PFC switching frequency up to 200kHz Inverter part with IGBT2 technology with inverter high side shunt for short circuit detection Housing W flow 1 Part-No V23990-P303-B-PM V23990-P304-B-PM V23990-P305-B-PM Voltage 600V 600V 600V Current1) 10A 15A 20A Comments Part-No Voltage Current1) Options* 1B06IPA004M* 1B06IPA010M* 600V 600V 4A 10A F: std. version C: SiC PFC diode IPM flowIPM 1B W W W W W Rectifier, PFC, 3-phase inverter Integrated DC capacitor Current sensing with laser trimmed shunts Complete gate drive circuit (incl. bootstrap) Temperature sensor Housing W flow 1B 17 SIXPACK flowPACK 0 3rd gen W W W Trench Fieldstop Technology IGBT3 (600V) Trench Fieldstop Technology IGBT4 (1200V) Low saturation losses and improved EMC behavior Housing W flow 0 17 mm 2-clip W flow 0 12 mm 2-clip Part-No Voltage Current1) Options* V23990-P861-*-PM V23990-P862-*-PM V23990-P863-*-PM V23990-P864-*-PM V23990-P865-*-PM V23990-P866-*-PM 600V 600V 600V 600V 600V 600V 10A 15A 20A 30A 50A 75A V23990-P867-*-PM V23990-P868-*-PM V23990-P869-*-PM V23990-P860-*-PM 1200V 1200V 1200V 1200V 8A 15A 25A 35A Part-No Voltage Current1) Options* V23990-P823-*-PM V23990-P824-*-PM V23990-P825-*-PM V23990-P828-*-PM V23990-P829-*-PM V23990-P820-*-PM 600V 600V 600V 1200V 1200V 1200V 50A 75A 100A 35A 50A 75A F: improved Rth F10: std. version F48 = 12mm flow0 2-clip housing F49 = 17mm flow0 2-clip housing flowPACK 1 W W W W Trench Fieldstop Technology IGBT3 (600V) Trench Fieldstop Technology IGBT4 (1200V) Low saturation losses and improved EMC behavior Compact design Housing W flow 1 1) Rated current of components 18 flowPACK 2 W W W W Trench Fieldstop Technology IGBT4 Low saturation losses Improved EMC behavior Compact and low inductive design Housing W flow 2 Part-No Voltage Current1) V23990-P688-F-PM V23990-P689-F-PM V23990-P680-F-PM 1200V 1200V 1200V 75A 100A 150A Part-No Voltage Current1) V23990-P704-F-PM V23990-P705-F-PM V23990-P706-F-PM V23990-P708-F-PM V23990-P709-F-PM V23990-P700-F-PM 600V 600V 600V 1200V 1200V 1200V 30A 50A 75A 15A 25A 35A Options flow90PACK 1 W W W Trench Fieldstop Technology IGBT3 for low saturation losses Supports designs with 90° mounting angle between heatsink and PCB Clip-in PCB mounting Housing W flow90 1 Options 19 SIXPACK MiniSKiiP® 1 PACK IGBT4 W W Trench Fieldstop IGBT4 Technology Solderless spring contact mounting system Housing W MiniSKiiP® 1 Part-No Voltage Current1) Semikron Equivalent V23990-K218-F40-PM V23990-K219-F40-PM V23990-K210-F40-PM 1200V 1200V 1200V 8A 15A 25A SKiiP 11 AC 12T4 V1 SKiiP 12 AC 12T4 V1 SKiiP 13 AC 12T4 V1 Part-No Voltage Current1) Semikron Equivalent V23990-K218-F-PM V23990-K219-F-PM V23990-K210-F-PM 1200V 1200V 1200V 8A 15A 25A SKiiP 11 AC 126 V1 SKiiP 12 AC 126 V1 SKiiP 13 AC 126 V1 MiniSKiiP® 1 PACK W W Trench Fieldstop IGBTs for low saturation voltage Solderless spring contact mounting system Housing W MiniSKiiP® 1 1) Rated current of components 20 MiniSKiiP® 2 PACK IGBT4 W W Trench Fieldstop IGBT4 Technology Solderless spring contact mounting system Housing W MiniSKiiP® 2 Part-No Voltage Current1) Semikron Equivalent V23990-K238-F40-PM V23990-K239-F40-PM V23990-K230-F40-PM 1200V 1200V 1200V 35A 50A 70A SKiiP 24 AC 12T4 V1 SKiiP 25 AC 12T4 V1 SKiiP 26 AC 12T4 V1 Part-No Voltage Current1) Semikron Equivalent V23990-K232-F-PM V23990-K233-F-PM V23990-K305-F-PM V23990-K238-F-PM V23990-K239-F-PM V23990-K230-F-PM 600V 600V 600V 1200V 1200V 1200V 50A 75A 100A 35A 50A 70A SKiiP SKiiP SKiiP SKiiP SKiiP SKiiP MiniSKiiP® 2 PACK W W Trench Fieldstop IGBTs for low saturation losses Solderless spring contact mounting system Housing W MiniSKiiP® 2 26 AC 27 AC 28 AC 24 AC 25 AC 26 AC 066V1 066V1 066V1 126V1 126V1 126V1 21 SIXPACK MiniSKiiP® 3 PACK IGBT4 W W Trench Fieldstop IGBT4 Technology Solderless spring contact mounting system Housing W MiniSKiiP® 3 Part-No Voltage Current1) Semikron Equivalent V23990-K438-F40-PM V23990-K439-F40-PM V23990-K430-F40-PM 1200V 1200V 1200V 70A 100A 150A SKIIP 37 AC 12 T4V1 SKIIP 38 AC 12 T4V1 SKIIP 39 AC 12 T4V1 HALFBRIDGE flowPHASE 0 2nd gen W W W W Trench Fieldstop Technology IGBT3 (600V) Trench Fieldstop Technology IGBT4 (1200V) Low saturation losses and improved EMC behavior Clip-in PCB mounting Housing W flow 0 17 mm 2-clip W flow 0 12 mm 2-clip 1) Rated current of components 22 Part-No Voltage Current1) Fx2062PA075SAxx3 600V 600V 600V 600V 1200V 1200V 1200V 1200V 1200V 1200V 75A 100A 150A 200A 50A 75A 100A 100A 100A 150A Fx2062PA100SAxx3 Fx2062PA150SAxx3 Fx2062PA200SAxx3 Fx2122PA050SCxx3 Fx2122PA050SCxx3 Fx2122PA100SCxx3 Fx2122PA100FExx3 Fx2122PA100FCxx3 Fx2122PA150SCxx3 Comments Options IGBT3 IGBT4, fsw < 8kHz IGBT2 phantom, fsw < 25kHz IGBT2 fast, fsw < 50kHz IGBT4, fsw < 8kHz 2FZ: 12mm 2-clip housing 2F0: 17mm 2-clip housing 301: Improved R (AlN) th flowPHASE 2 1st gen W W W Trench Fieldstop Technology IGBT Low saturation losses and improved EMC behavior Reliable solder and screw contacts Housing W flowSCREW 2 Part-No Voltage Current1) Options V23990-P610-F02-PM 1200V 300A Part-No Voltage Current1) Comments S2064PA300SA S2064PA400SA S2124PA200FE S2124PA200SC S2124PA300SC 600V 600V 1200V 1200V 1200V 300A 400A 200A 200A 300A 30kW 40kW 40kW 40kW 60kW flowPHASE 2s 2nd gen W W W W W W Trench Fieldstop Technology IGBT3 (600V) Trench Fieldstop Technology IGBT4 (1200V) Low saturation losses and improved EMC behavior Low resistive high current path Low inductive transient current path Reliable solder and screw contacts / / / / / 20kHz, IGBT3 20kHz, IGBT3 20kHz, IGBT2 phantom 8kHz, IGBT4 8kHz, IGBT4 Housing W flowSCREW 2 23 HALFBRIDGE flowPHASE 3 1st gen W W W Trench Fieldstop Technology IGBT Low saturation losses and improved EMC behavior Reliable solder and screw contacts Housing W flowSCREW 3 Part-No Voltage Current1) V23990-P669-F02-PM V23990-P660-F02-PM 1200V 1200V 300A 450A Options H-BRIDGE fastPACK 0 H W W W Ultra low inductive design Ultra fast switching frequency Clip-in PCB mounting Housing W flow 0 17 mm 4-clip 1) Rated current of components 24 P622 + P628 P623 + P629 Part-No Voltage Current1) Comments V23990-P622-F64-PM V23990-P622-F74-PM V23990-P623-F04-PM V23990-P623-F14-PM V23990-P623-F24-PM V23990-P624-F24-PM V23990-P625-F24-PM V23990-P628-F64-PM V23990-P629-F44-PM V23990-P629-F46-PM V23990-P629-F54-PM V23990-P629-F56-PM 600V 600V 600V 600V 600V 600V 600V 900V 1200V 1200V 1200V 1200V 30A 30A 60A 60A 50A 75A 100A 26A 25A 25A 25A 25A CoolMOS, fsw < 400kHz, ZVS CoolMOS, fsw < 400kHz, improved Rth (AlN), ZVS IGBT2 fast, fsw < 250kHz IGBT2 fast, fsw < 250kHz, improved Rth (AlN) IGBT3, fsw < 30kHz CoolMos C3 120 mOhm, fsw < 250 kHz, parallel boost IGBT2 phantom, fsw < 50kHz IGBT2 phantom, fsw < 50kHz, hyperfast diodes IGBT2 phantom, fsw < 50kHz, improved Rth (AlN) IGBT2 phantom, fsw < 50kHz, improved Rth (AlN), hyperfast diodes fastPACK 0 H with capacitor W W W W Ultra low inductive design Integrated capacitor Ultra fast switching frequency Clip-in PCB mounting Housing W flow 0 17 mm 4-clip P722 Part-No Voltage P723 + P729 Current1) Comments V23990-P722-F64-PM V23990-P722-F74-PM 600V 600V 30A 30A CoolMOS CFD 90mOhm with fast body diode, fsw < 400kHz V23990-P723-F04-PM V23990-P723-F14-PM V23990-P729-F44-PM V23990-P729-F46-PM V23990-P729-F54-PM V23990-P729-F66-PM 600V 600V 1200V 1200V 1200V 1200V 60A 60A 25A 25A 25A 25A IGBT2 fast, fsw < 250kHz Part-No V23990-P381-A-PM V23990-P382-A-PM V23990-P385-A11-PM V23990-P380-A-PM V23990-P386-A11-PM V23990-P387-A11-PM Voltage 600V 600V 600V 600V 600V 600V Current1) 12A 20A 20A 30A 30A 40A Comments CoolMOS CFD 90mOhm with fast body diode, fsw < 400kHz, improved Rth (AlN) IGBT2 fast, fsw < 250kHz, improved Rth (AlN) IGBT2 phantom, fsw < 50kHz IGBT2 phantom, fsw < 50kHz, hyperfast diodes IGBT2 phantom, fsw < 50kHz, improved Rth (AlN) IGBT2 phantom, fsw < 50kHz, improved Rth (AlN), hyperfast diodes fastPIM 1 H W W Ultra fast switching frequency Ultra low inductive design Housing W flow 1 Improved Rth (AlN) Improved Rth (AlN) Improved Rth (AlN) 25 RECTIFIER flowCON 0 W W W W Modular input rectifier Optionally half controlled Compatible with flowPHASE and flowPACK Combines P590 and P600 to a three phase rectifier Housing W flow 0 17 mm 4-clip P64x Current1) P590 Part-No Voltage Options* V23990-P649-*-PM 1600V 50A V23990-P640-*-PM 1600V 75A V23990-P590-J09-PM 1600V 105A V23990-P590-J19-PM 1600V 78A V23990-P600-I09-PM 1600V 105A V23990-P600-I19-PM 1600V 78A Part-No Voltage Current1) Options* V23990-P717-*-PM V23990-P718-*-PM V23990-P719-*-PM 1600V 1600V 1600V 35A 50A 75A G: G10: H: H10: G: G10: H: H10: std. Rectifier, with brake enh. Rectifier, with brake std. Rectifier, w/o brake enh. Rectifier, w/o brake Standard rectifier Half controlled rectifier Standard rectifier Half controlled rectifier flow90CON 1 W W W W Input rectifier optionally half controlled Compatible with flow90PACK 1 Clip-in PCB mounting Clip or screw-on heatsink mounting Housing W flow90 1 1) Rated current of components 26 std. Rectifier, with brake enh. Rectifier, with brake std. Rectifier, w/o brake enh. Rectifier, w/o brake P600 PFC flowPFC 0 1st gen W W W W High power, high efficiency PFC circuit Optionally half controlled Up to 400kHz switching frequency Integrated high frequency capacitors Housing W flow 0 17 mm 4-clip Part-No Voltage Current1) Comments Options* V23990-P802-D*0-PM V23990-P803-D*0-PM V23990-P804-D*0-PM V23990-P800-D*0-PM V23990-P804-D30-PM 500V 500V 600V 600V 600V 15A 28A 30A 34A 36A CooIMOS™ + Tandem Diode CooIMOS™ + Tandem Diode Highspeed IGBT + Tandem Diode CooIMOS™ + SiC Diode Highspeed IGBT + Tandem Diode, enhanced rectifier 3: standard rectifier 4: half controlled rectifier flowPFC 0 2nd gen W W W W Compact and low inductance design Suitable for Interleaved topology Suitable for current sensing in collector or in emitter PFC for welding, SMPS, motor drives, UPS, chargers Housing W flow 0 17 mm 2-clip W flow 0 12 mm 2-clip Part-No Voltage Current1) Comments Options* F0062TA099FH02* 600V 20A CooIMOS™ + SIC With SCR, current sense in emitter, housing 17 mm FZ062TA099FH* 600V 25A CooIMOS™ + SIC Default: w/o SCR, current sense in collector 01: with SCR, current sense in collector FZ062UA032FP* 600V 30A Parallel switch: CooIMOS™ // PT + Stealth II 10: w/o SCR, current sense in collector 11: with SCR, current sense in collector 12: w/o SCR, current sense in emitter 13: with SCR, current sense in emitter FZ062TA030FB* 600V 30A Highspeed IGBT2 + Stealth II FZ062UA040FP* 600V 40A Parallel switch: CooIMOS™ // PT IGBT + Stealth II FZ062TA040FB* 600V 50A Highspeed IGBT2 + Stealth II Default: w/o SCR, current sense in collector 01: with SCR, current sense in collector 02: w/o SCR, current sense in emitter 03: with SCR, current sense in emitter 27 SOLAR TOPOLOGIES FZ06BIA045FH01 flowSOL 0 Transformerless, Single Phase W W W High efficiency Dedicated designs for transformer-based and transformerless topologies Ultra fast switching frequency FZ06BIA045FH02 Housing W flow 0 12 mm 2-clip Part-No FZ06BIA045FH Voltage 600V Current1) 50A FZ06BIA045FH01 600V 50A FZ06BIA045FH02 600V 50A Comments 45 mOhm (boost + H-Bridge) + SiC in boost and H-Bridge, old name: P897-E 45 mOhm (boost + H-Bridge) + SiC in boost, old name: P897-E10 45 mOhm (boost + H-Bridge) + SiC in boost and H-Bridge, open emitter FZ06BIA083FI flowSOL 0 Transformerbased, Single Phase W W W V23990-P628-F64-PM* High efficiency, CoolMOS™ + SiC diode Ultra fast switching frequency Use FZ06RIA045FH with FZ06BIA083FI or V23990-P628-F64-PM Housing W flow 0 12 mm 2-clip 1) Rated current of components * Without booster 28 FZ06RIA045FH Part-No FZ06BIA083FI Voltage 600V Current1) 30A FZ06RIA045FH 600V 50A V23990-P628-F64-PM 900V 26A Comments Primary, 45 mOhm (boost) + SiC, 83 mOhm + H-Bridge, old name: P869-E Secondary, ultrafast rectifier + 45 mOhm SiC highside rectifier Primary, CoolMOS™ C3 120 mOhm, fsw < 250 kHz, parallel boost BOOSTER flowBOOST 0 Symmetric W W W W High efficiency symmetric boost Dedicated designs for solar and UPS applications Ultra fast switching frequency Use together with flowNPC 0 FZ06NBA045FH Housing W flow 0 12 mm 2-clip FZ06NBA*SA Part–No Voltage Current1) Comments FZ06NBA045FH FZ06NBA030SA FZ06NBA050SA FZ06NBA075SA 600V 600V 600V 600V 35A 30A 50A 75A CoolMOS™ + (45 mOhm) SiC diodes, bypass diode IGBT3 V23990-P621-F68-PM flowBOOST 0 Parallel W W W 2x 900V / 120 mOhm CoolMOS™-C3 or 2x 1200V / 64A highspeed IGBT 1200V SiC diodes Bypass rectifier V23990-P629-F62-PM Housing W flow 0 12 mm 2-clip Part –No V23990-P621-F68-PM V23990-P629-F62-PM Voltage Current1) Comments 1200V 900V 2x 40A 2x 120 mOhm CoolMOS™ +SiC Ultrafast IGBT + SiC diodes, bypass diode 29 NPC flowNPC 0 W W W W High efficiency threelevel half-bridge (2 x 600V = 1200V) Dedicated designs for solar and UPS applications Ultra fast switching frequency Compatible with flowBOOST 0 Dual Housing W flow 0 12 mm 2-clip NI NR Part –No Voltage Current1) Comments FZ06NIA030SA FZ06NRA045FH 600V 600V 30A 30A FZ06NRA045FH01 600V 30A FZ06NIA050SA FZ06NPA045FP 600V 600V 50A 50A FZ06NPA045FP01 600V 50A FZ06NPA070FP 600V 70A FZ06NPA070FP01 600V 70A IGBT3 CoolMOS™ + IGBT3, SiC diodes + reactive power CoolMOS™ + IGBT3 + Stealth II diodes, reactive power IGBT3 Parallel switch (CoolMOS™ + IGBT PT) SiC diodes, reactive power Parallel switch (CoolMOS™ + IGBT PT) Stealth II diodes, reactive power Parallel switch (CoolMOS™ + IGBT PT) SiC diodes, reactive power Parallel switch (CoolMOS™ + IGBT PT) Stealth II diodes, reactive power IGBT3 FZ06NIA075SA 600V 75A FZ06NIA045FH FZ06NIA045FH01 600V 600V 75A 75A CoolMOS™ CP + IGBT3 + SiC diodes CoolMOS™ CP + IGBT3 + Stealth II diodes Part –No Voltage Current1) Comments F106NIA100SA F106NIA150SA 600V 600V 100A 150A flowNPC 1 W W W W High efficiency three-level half-bridge (2x 600V = 1200V) Trench Fieldstop Technology IGBT3 Low Inductance Layout For solar, UPS and motor drives Housing W flow 1 1) Rated current of components 30 NP flowNPC 2 W W W W High efficiency three-level half-bridge (2x 600V = 1200V) Trench Fieldstop Technology IGBT3 Low Inductance Layout For solar, UPS and motor drives Housing W flow 2 Part –No Voltage Current1) Comments F206NIA200SA F206NIA200SG F206NIA300SA 600V 600V 600V 200A 200A 300A High Speed (> 16 kHz) Housing Dimensions flow 0 17 mm 2-clip Housing Dimensions: height: 17 mm length: 66 mm width: 33 mm long direction convexity max. 0,2 mm flow 0 12 mm 2-clip Housing Dimensions: height: 12 mm length: 66 mm width: 33 mm long direction convexity max. 0,2 mm 32 flow 0 17 mm 4-clip Housing Dimensions: height: 17 mm length: 66 mm width: 33 mm long direction convexity max. 0,2 mm flow 1 Housing Dimensions: height: 17 mm length: 82 mm width: 38 mm 33 flow 1B Housing Dimensions: height: 16 mm length: 72 mm width: 36 mm flow 2 Housing Dimensions: height: 17 mm length: 108 mm width: 47 mm 34 flow90 1 Housing Dimensions: height: 28 mm length: 84 mm width: 21 mm flowSCREW 2 Housing Dimensions: height: 17 mm length: 117 mm width: 64 mm 35 flowSCREW 3 Housing Dimensions: height: 17 mm length: 150 mm width: 64 mm flat 1 Housing Dimensions: height: 13 mm length: 108 mm width: 47 mm 36 MiniSKiiP® 1 Housing Dimensions: height: 16 mm length: 42 mm width: 40 mm MiniSKiiP® 2 Housing Dimensions: height: 16 mm length: 59 mm width: 52 mm 37 MiniSKiiP® 3 Housing Dimensions: height: 16 mm length: 82 mm width: 59 mm 38 MiniSKiiP Options ® MiniSKiiP® Modules with pre-applied Thermal Paste Lid For all MiniSKiiP® modules, two different lids are available: W W Standard version: 6.5mm height, possibility to mount SMD parts below the lid Thin version: Only 2.8mm height, for very compact mechanical designs Standard Lid Thin Lid Thermal Paste Vincotech offers MiniSKiiP® modules with pre-applied thermal paste. Features: W W W W W W Faster and easier assembly of the module Optimized thickness of the thermal interface material Lower thermal resistance and reduced risk of DCB cracking Easier production process, no need of screen printing facilities Highest process reliability because of automated screen printing Standard solder profile applicable (e.g. J-STD-001, J-STD-003) Properties Material Thermal Conductivity Wacker P12 1 W/m*K Order Codes Option codes for MiniSKiiP® options are: Example order code V1: V23990-K220-A40-/1A/-PM Option Code Lid Thermal Paste P12 /0A/ /1A/ /0B/ /1B/ Standard (6.5mm) Standard (6.5mm) Thin (2.8mm) Thin (2.8mm) – Applied – Applied Example order code V2: 80-M206BIA045FH-K999E10-/1A/ Please ask your responsible sales contact for availability of MiniSKiiP® options. 39 Phase Change Material Pre-applied thermal conducting material The usage of phase change material for the thermal conducting between module and heat sink holds a lot of advantages. This material is solid at room temperature. Therefore, it is smear-resistant during transportation and assembly of the module. The screen-printing process is very accurate. Thus, the thickness of the material is well defined and can be optimized to a maximum of heat transfer capability. Features: W W W W W W W Faster and easier assembly of the module Optimized thickness of the thermal conducting material Better Rth and reduced risk of DCB cracking Easier production process, no need of screen printing facilities Highest process reliability because of automated screen printing No risk of smear the thermal paste, material is solid a room temperature Standard solder profile applicable (e.g. J-STD-001, J-STD-003) Properties Order Codes Option code for the phase change material for flow 0 and flow 1 modules is /3/ (see also page 42). Example order code V1: V23990-P840-A48-/3/-PM Example order code V2: 10-FZ06BIA045FH01-P897E10-/3/ Please ask your responsible sales contact for availability of Phase Change option. 40 Parameter Value Unit Thermal Conductivity Phase Change Temperature 3.4 +45 W/m*K °C Save Time – Press in! Press-fit Technology Vincotech‘s new Press-fit Technology drastically reduces PCB assembly time and effort. Well established in the automotive industry, the Press-fit pin eliminates the need for soldering, thus reducing the process time and therefore the costs. An increased production output capacity is the direct consequence. The elimination of the module solder process also allows for design flexibility: the module can easily be mounted on the other side of the PCB at no extra cost and effort. Features: W W W W W Advantages: W W W W W W Order Codes Order code V1: Press-fit option is shown as an additional letter Y at the end of option code (see also page 42). W W Approved round-shaped Press-fit area Compliance to DIN and IEC standards Tapered pin-head shape Same Press-fit area for all power ranges Availability in three versions, covering all Vincotech power module families: – For 12 mm base plate-less housings – For 17 mm base plate-less housings – For 17 mm housings with base plate Example of Press-In Equipment Block to apply Force Module PCB Press-In Tool Elimination of a costly additional solder process Pin-compatibility to existing solder pin module portfolio Very high current capability (30A @ 80°C) Reliable cold welding connection to PCB No PCB hole damage, allowing for reuse Thermo-mechanical push and pull-force relief Flexible mounting onto the power module DCB Production cost saving Example order code V1: V23990-P840-F49Y-PM Order code V2: Press-fit option is shown as alternative housing (see also page 42) Example order code V2: 10-PZ06BIA045FH01-P897E10 Please ask your responsible sales contact for availability of Press-fit option. 41 Description – Naming System Vincotech established a new naming system for the power modules business as a consistent basis for naming modules. Currently Vincotech is using two naming systems – ‘Version 1’ and ‘Version 2’. VERSION 1 This ordering code is identical with the product name as shown in the catalogue. ‘Version 1’ is still valid for all products released before this time. Leading number: V23990: Power Modules V23109: Relays S30814: Hybrids Product Identification First two digits: Product family identifier Last digit: Module identifier Modules are listed from lowest to highest power (e.g. 600V/5A – 1200V/15A) Partnumber ending V23990 - P 5 69 - F31 Y - /1/ - PM Product Classification: P: flow Power Modules K: MiniSKiiP® Power Modules S: Relays Q: Hybrids Voltage 06: 600V 09: 900V 12: 1200V VERSION 2 Option Code Diffent housings Optional DCB material Optional parts (e.g. brake) Y as last letter: Press-fit option (see also page 41) Pinout Modules with same topology, same housing, and same pinout have same character Current/Rdson 045 (IGBT): 45A 045 (MOS): 45mOhm Option Code 2 (optional) Phase Change material (see also page 40) MiniSKiiP® options (see also page 39) Internal Identifier Variants e.g. alternative parts Technology Group for UL notification 10 - FZ 06 BI A 045 FH 01 - P623F10 - /1/ With the new naming system ‘Version 2’, for all products released since mid 2009, a new product name and ordering code have been introduced. - New product name describes module characteristics and is used in catalog and website. - New ordering code extends product name and is listed in the modules data sheet. 42 Housing Solder Pins FZ: flow 0 12mm F0: flow 0 17mm F1: flow 1 FB: flow 1B F2: flow 2 R1: flow90 1 S2: flowSCREW 2 S3: flowSCREW 3 PressFit Pins PZ: flow 0 12mm P0: flow 0 17mm P1: flow 1 PB: flow 1B P2: flow 2 T2: flowSCREW 2 T3: flowSCREW 3 (see also page 41) Topology 2P: Halfbridge 2T: Rectifier + PFC 2U: Rectifier + P-Switch PFC BI: Boost + Inverter IP: IPM w/o brake, with PFC NB: Symmetric Boost NI: NPC NP: NPC Parallel Switch NR: NPC Reactive Power RI: Rectifier + Inverter Order Code (find in product data sheet) Option Code (optional) Phase Change material (see also page 40) MiniSKiiP® options (see also page 39) Chip FB: FC: FE: FH: FI: FP: MC: MF: SA: SB: SC: SG: technology IGBT2 High Speed IGBT2 Fast IGBT Phantom Speed CoolMOS CP CoolMOS CFD Parallel Switch MOSFET + SiC MOSFET + Fast Diode IGBT3 IGBT3 LL IGBT4 IGBT3 High Speed Product Name Simulation Software Vincotech ISE NEW The Integrated Simulation Environment The Vincotech ISE is an integrated simulation and selection environment for power and solar modules. The program contains the already introduced applications flowSIM and flowSEL in an updated version and some new applications like flowSOL and flowMIS. 1 2 Software Download: Step 01: Download and install LabVIEW Runtime Engine once (if not already installed). Direct link: www.vincotech.com/simulation_software.html 3 4 flowSIM (V4.00): a software for interactive calculation of power dissipations and temperatures by using Vincotech Power Modules. It is a tool supporting you by the selection of the right devices for your application. The power loss and device temperature calculations are based on fully measured parameters. 1 flowSEL (V1.30): a tool to chose the suitable driver stage for your application. Based on the generated curves you can get information about the current, power, and temperature conditions for your application. 2 Step 02: Download Vincotech ISE.exe into your simulation directory. Step 03: Start Vincotech ISE.exe flowSOL (V1.00): a simulation tool for solar modules. The program is based on flowSIM therefore its behavior is very similar to flowSIM. 3 4 flowMIS (V1.00): a tool to simulate the power and temperature characteristics of the modules stimulated with a given operation profile. 43 Vincotech Locations Chicago Lyon Copenhagen Berlin Unterhaching Bicske Seoul San Francisco Shanghai Shenzhen Taipeh Headquarters Design Center Sales Offices Manufacturing Sao Paulo Vincotech is a worldwide leader in the development and manufacturing of active electronic modules. In 1996 the decision was made to step into this future-oriented technology with a focus on the electronic drives and solar market. The responsibility for this product group is based in Unterhaching, Germany. A dedicated team continuously develops new state of the art technologies, which are turned into standard and customized products. All power module products are developed and manufactured in our ISO9001 and TS16949 certified factory in Hungary. Our modules conform to the RoHS standard and are 100% electrically and functionally tested prior to packaging. This way we constantly guarantee high quality products. Vincotech, your reliable partner! The information provided herein is believed to be reliable at press time. Vincotech assumes no responsibility for inaccuracies or omissions. Vincotech assumes no responsibility for the use of this information, and all such information shall be entirely at the users own risk. Prices and specifications are subject to change without notice. Vincotech does not authorize or warrant any of its products for use in life-support devices and / or systems. Your local contact: RoHS Ready Vincotech GmbH Biberger Straße 93 82008 Unterhaching/Munich Germany Tel.: +49 (0)89 8780 67-0 Fax: +49 (0)89 8780 67-300 www.vincotech.com Copyright © 2010 · Vincotech GmbH · Online · Vincotech-038-1110.0-E Vincotech is a trademark. flowPIM is a trademark of Vincotech Holdings S.à.r.l. SEMIKRON is a trademark. MiniSKiiP® is a trademark of SEMIKRON Elektronik GmbH & Co. KG. COOLMOS is a trademark of Infineon Technologies AG.