IGD-8-426-E1F12-BH-FA Characteristics Symbol Conditions min. typ. max. Unit 1490 A 1460 1600 A 1140 1700 A 1200 V Electrical Data Irms Tamb=40°C, 3kHz, 650Vdc, 400Vac, cos=0,85 no overload 110% overload, 60s every 10min 150% overload, 60s every 10min VCES fsw max. switching frequency VDC DC voltage applied to the capacitor bank 750 V Three-phase inverter VAC network voltage (line side), -20% / +15% 460 V SEMIKUBE - Size 3H Visol 50Hz / 1min 2500 V Ptot Tamb=40°C 11720 W Tj Tvj for continous operation 125 °C IGBT Module Stack IGD-8-426-E1F12-BH-FA Preliminary Data Features SKC4M7-40A1 LTE mF Electrolyt expected lifetime calculated, forced air cooling 60 kHrs expected lifetime calculated, w/o forced air cooling 30 kHrs Controller Interface Data supply voltage primary side Typical Applications ISO supply current primary side (+ external current sensors) • • • • • VIT+ Input threshold voltage (HIGH) VIT- Input threshold voltage (LOW) RIN Input resistance ITRIPSC Ttp No. 08800900 42.3 C VS Industrial AC motor control UPS Solar inverter Oil and gas pumps -40 kHz Capacitor Data CDC • Highly compact • Integrated current, voltage and temperature sensors • Easy maintenance • Easy mounting and dismounting • Very high Life-Time Expectancy • Very low inductive DC bus 15.6 21.6 24 26.4 V 270 1200 mA 0,7*Vs V 0.3*Vs V 10 kΩ Over current trip level 3600 APEAK Over temperature protection level 100 °C Mechanical Data Footnotes Electrical parameters to be derated for Tamb > 40°C dv/dtAIR required airflow per fan w approx. total weight Size Width x Depth x Height (with fan) Tstg w/o need of reforming the caps Tamb m3/h 620 110 1122 752 kg 544 -20 40 °C -20 55 °C °C Ths Alltitude installation height w/o derating Protection Pollution mm 1000 m IP00 EN 50178 2 Fan Data Fan included in the stack ( NO ) Type (SKF 16 O-230-01) VFan Fan voltage 230 V fFAN Fan frequency 50 Hz IFAN Fan current 1.3 A PFAN Fan power 300 W B6CI © by SEMIKRON Rev. 0 – 03.08.2009 1 IGD-8-426-E1F12-BH-FA PIN Array X1 PIN Signal Function Specifications X1:01 IF_PWR_VP Power Supply Supply voltage +24VDC (±10%) IN X1:02 IF_PWR_GND IF_HB X1:03 IF_PWR_VP Power Supply Supply voltage +24VDC (±10%) IN X1:04 IF_PWR_GND GND_for_IF_PWR_VP X1:05 IF_PWR_VP Power Supply X1:06 IF_PWR_GND GND_for_IF_PWR_VP X1:07 IF_CMN_rsrvd Reserved Supply voltage +24VDC (±10%) IN X1:08 IF_CMN_GND GND for IF_CMN_nHALT, IF_CMNrsrvd X1:09 IF_CMN_nHALT Status signal Digital IF_PWR_VP logicLOW (dominant) = not ready to operateHIGH (recessive) = ready to operate X1:10 IF_CMN_GPIO General purpose IO Inverted IF_CMN_nHALT signal Signal propagation time to IF_CMN_nHALT signal: 100µs (typ.) X1:11 IF_CMN_ANLG0 Temperature analog out Max. output current: 5mA Turns ratio: 100mV/°C Max. voltage range: +15V Nominal voltage range: 0…10V X1:12 IF_CMN_AGND0 GND for IF_CMN_ANLG0 X1:13 IF_CMN_ANLG1 UDC analog out Max. output current: 5mA Turns ratio: 10mV/V Max. voltage range: +15V Nominal voltage range: 0…10V X1:14 IF_CMN_AGND1 GND for IF_CMN_ANLG1 X1:15 IF_HB1_TOP Switching signal input (HB1 TOP switch) Digital IF_PWR_VP logic LOW = TOP switch off HIGH = TOP switch on X1:16 IF_HB1_TOP Switching signal input (HB1 BOT switch) Digital IF_PWR_VP logic LOW = BOT switch off HIGH = BOT switch on X1:17 IF_HB1_rsvrd Reserved X1:18 IF_HB1_GND GND for IF_HB1_TOP, IF_HB1_BOT, IF_HB1_rsrvd X1.19 IF_HB1_ANLG I analog out HB1 Max. output current: 5mA Turns ratio: 3mV/A Max. voltage range: ±15V Nominal voltage range: -10…10V X1:20 2 IF_HB1_AGND GND for IF_HB1_ANLG Rev. 0 – 03.08.2009 © by SEMIKRON IGD-8-426-E1F12-BH-FA Connector X1 (Flat cable connector e.g. Harting) Productinformation of suitable female connectors and distributor contact information is available at e.g. http://www.harting.com (part number 09 18 520 7 813 – female connector with strain relief clamp). © by SEMIKRON Rev. 0 – 03.08.2009 3 IGD-8-426-E1F12-BH-FA SEMIKUBE GD-8HA, Px308/308 3D view of the SEMIKUBE Size '3' This technical information specifies semiconductor devices but promises no characteristics. No warranty or guarantee expressed or implied is made regarding delivery, performance or suitability. © by SEMIKRON Rev. 0 – 03.08.2009 5