CPI │ Receiver Front Ends Integrated Front Ends CPI Beverly Microwave Division manufactures a variety of RF Front Ends using both Ferrite Circulator and Balanced Hybrid Duplexing Technology Typical Operating Parameters Frequency L-Band S-Band C-Band X-Band Ku-Band Ka-band Peak Power Handling 100 KW 100 KW 100 KW 50 KW 20 KW 10 KW Average Power Handling 500 W 500 W 100 W 50 W 20 W 10 W Pulse Width 100 µs 100 µs 100 µs 100 µs 50 µs 5 µs Transmit Path Loss 0.4 dB 0.4 dB 0.5 dB 0.6 dB 0.8 dB 1.0 dB Noise Figure 3.5 dB 3.5 dB 4.5 dB 5.0 dB 6.0 dB 7.0 dB Gain 30 dB 30 dB 30 dB 20 dB 20 dB 20 dB +20 dBm +16 dBm Max Output Power Recovery Time 2 µs 2 µs 2 µs 2 µs 1 µs 1 µs 1 dB Compression +12 dBm +12 dBm +12 dBm +10 dBm +10 dBm +12 dBm Performance Advantages • Low Noise Figure • High Power Handling Multifunction Capability • Variable Attenuation • Excess Noise • Calibration couplers The values listed above represent typical limits for the product and design trade-offs are available for enhanced performance of various parameters. The data should be used for basic information only. Formal, controlled specifications may be obtained from CPI for use in equipment design. For information on this and other CPI products visit our webpage at www.cpii.com, or contact CPI Beverly Microwave Division, 150 Sohier Road, Beverly, MA 01915 Telephone: 1 (978) 922-6000 FAX: 1 (978) 922-2736 email: [email protected]