AY2 Sample Kit www.vishay.com Vishay BCcomponents AY2 Sample Kit AC Line Rated Ceramic Disc Capacitors Class X1, 440 VAC, Class Y2, 300 VAC FEATURES • AEC-Q200 qualified • Withstand more than 1000 temperature cycles (from -55 °C to +125 °C) • Complies with IEC 60384-14 4th edition • High reliability • Straight and inline kink leads • Singlelayer AC disc safety capacitors • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 The sample kit contains a total of 7 capacitance values with 10 pieces each. SPECIFICATIONS Part number AY21-KIT-HF Class X1, 440 VAC, Class Y2, 300 VAC Capacitors type Temperature coefficient Refer to specified ceramic type Tolerance 10 %, 20 % Capacitance range/ E-series Refer to below table Number of capacitance values 7 Capacitors per value / total 10 / 70 Note • The products are specified by the underlying datasheet “AY2 Series” in its latest edition at www.vishay.com/doc?28550 CAPACITANCE VALUE LIST CAPACITANCE (pF) TOLERANCE (%) DIMENSIONS (mm) LEAD SPACING (mm) AY2101K29Y5SS63L7 100 10 7.5 x 5.0 7.5 AY2221K29Y5SS63L7 220 10 7.5 x 5.0 7.5 AY2471K29Y5SS63L7 470 10 7.5 x 5.0 7.5 AY2102M29Y5US63L7 1000 20 7.5 x 5.0 7.5 AY2222M35Y5US63L7 2200 20 9.0 x 5.0 7.5 AY2332M41Y5US63L7 3300 20 10.5 x 5.0 7.5 AY2472M49Y5US63L7 4700 20 12.5 x 5.0 7.5 PART NUMBER Note • The product can be ordered using the PART NUMBER Revision: 17-Feb-16 Document Number: 28553 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 AY2 Sample Kit www.vishay.com Vishay BCcomponents LEAKAGE CURRENT VS. VOLTAGE (Typical) 120 3.5 60 Hz, 25 °C 3.0 2.5 60 Hz, 25 °C 100 3900 pF 80 3300 pF Current I (μA) Current I (μA) 100 pF 4700 pF 2.0 1.5 2200 pF 1500 pF 1.0 1000 pF 680 pF 470 pF 330 pF 220 pF 150 pF 0.5 0.0 0 68 pF 60 47 pF 40 33 pF 22 pF 20 10 pF 0 200 400 600 800 1000 1200 1400 1600 1800 2000 2200 2400 2600 0 200 400 600 800 1000 1200 1400 1600 1800 2000 2200 2400 2600 AC Voltage VRMS AC Voltage VRMS Z (Ω) IMPEDANCE VS. FREQUENCY (Typical) 100 10 0.1 nF 1.0 nF 0.68 nF 1 2.2 nF 4.7 nF 0.1 1 10 100 1000 f (MHz) Lead configuration: length = 30 mm, lead spacing: standard, lead diameter: standard, inline crimp Note • The capacitors meet the essential requirements of “EIA 198”. Unless stated otherwise all electrical values apply at an ambient temperature of 25 °C ± 3 °C, at normal atmospheric conditions. Revision: 17-Feb-16 Document Number: 28553 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000