VY1 Sample Kit www.vishay.com Vishay BCcomponents VY1 Sample Kit AC Line Rated Ceramic Disc Capacitors Class X1, 760 VAC, Class Y1, 500 VAC FEATURES • Singlelayer AC disc safety capacitors • Complying with IEC 60384-14 4th edition • High reliability • Vertical (inline) kinked or straight leads • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 Available The sample kit contains a total of 7 capacitance values with 10 pieces each. SPECIFICATIONS Part number VY11-KIT-HF Class X1, 760 VAC, Class Y1, 500 VAC Capacitors type Temperature coefficient Refer to specified ceramic type Tolerance 10 %, 20 % Capacitance range / E-series Refer to below table Number of capacitance values 7 Capacitors per value / total 10 / 70 Note • The products are specified by the underlying datasheet “VY1 Series” in its latest edition at www.vishay.com/doc?28537 CAPACITANCE VALUE LIST CAPACITANCE (pF) TOLERANCE (%) DIMENSIONS (mm) LEAD SPACING (mm) VY1221K31Y5SG63V0 220 10 8.0 x 5.0 10 VY1471M31Y5UG63V0 470 20 8.0 x 5.0 10 VY1681M31Y5UG63V0 680 20 8.0 x 5.0 10 VY1102M35Y5UG63V0 1000 20 9.0 x 5.0 10 VY1222M47Y5UG63V0 2200 20 12.0 x 5.0 10 VY1332M59Y5UG63V0 3300 20 15.0 x 5.0 10 VY1472M63Y5UG63V0 4700 20 16.0 x 5.0 10 PART NUMBER Note • The product can be ordered using the PART NUMBER Revision: 17-Feb-16 Document Number: 28552 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VY1 Sample Kit www.vishay.com Vishay BCcomponents LEAKAGE CURRENT VS. VOLTAGE (Typical) 180 3500 4700 pF 3000 3300 pF 2500 2200 pF 2000 1500 pF 1500 1000 pF 1000 680 pF 500 470 pF 330 pF 220 pF 150 pF Leakage Current (µA) RMS Leakage Current (µA) RMS 4000 0 160 140 100 pF 120 100 68 pF 80 47 pF 60 33 pF 40 22 pF 22 pF 10 pF 20 0 0 500 1000 1500 2000 2500 3000 3500 0 4000 500 1000 1500 2000 2500 3000 3500 4000 AC Voltage (V) RMS AC Voltage (V) RMS IMPEDANCE VS. FREQUENCY (Typical) Impedance (Ω) 100 Lead configuration: - Length = 30 mm - Lead spacing: Standard - Lead diameter: Standard - Inline crimp 10 0.1 nF 1.0 nF 1 0.01 nF 0.68 nF 2.2 nF 4.7 nF 0.1 1 10 Frequency (MHz) 100 Note • The capacitors meet the essential requirements of “EIA 198”. Unless stated otherwise all electrical values apply at an ambient temperature of 25 °C ± 3 °C, at normal atmospheric conditions. Revision: 17-Feb-16 Document Number: 28552 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000