CDR

V i shay Intertechnology, Inc .
AND TEC
O L OGY
INNOVAT
I
N
HN
Multilayer Ceramic Chip Capacitors
CDR
O
19
62-2012
Capacitors - Military Established Reliability
Multilayer Ceramic Chip Capacitor
MIL-PRF-55681
Key Benefits
•
•
•
•
•
Broad capacitance range: 1.0 pF to 0.47 µF
Voltages: 50 WVDC and 100 WVDC
Military established reliability failure rates: M, P, R and S
Federal stock control number, CAGE CODE SHV71
Available in ten military packages: CDR01, CDR02, CDR03, CDR04, CDR06, CDR31, CDR32, CDR33, CDR34, CDR35
• Wet build process with reliable Noble Metal Electrode (NME) system
• Tin/lead (min. 4 % lead) termination finish available. Termination codes “Z” and “U”
• Lead (Pb)-free termination codes “W”, “Y” and “M”
APPLICATIONS
•
•
•
•
•
•
Military and high-reliability designs
Avionic systems
Sonar systems
Satellite systems
Geographical information systems
Global positioning systems
Resources
• Datasheet: CDR - http://www.vishay.com/doc?45026
• For technical questions contact [email protected]
• Material categorization: For definitions of compliance please see
http://www.vishay.com/doc?99912
Note
One of the World’s Largest Manufacturers of
(1)
Pb containing terminations are not RoHS
compliant, exemptions may apply
PRODUCT SHEET
Discrete Semiconductors and Passive Components
1/2
VMN-PT9142-1206
This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO
SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
BP
• Very
- typical
of 0.65 mm
100 low profile
F
220 p height
F
270 p
CDR02 (1805)
TM
BX
CDR02 (1805)
100
3.9 nF
22 nF
CDR-MIL-PRF-55681
eSMP
Series
• Ideal for automated placement
New Product
BP
CDR03 (1808)
100
F
330 p
F
1.0 n
V i shay Intertechnology,
Inc .
Vishay
BX
CDR03
(1808)Vitramon
100
12 nF drop, low power
68 nF
• Low
forward voltage
MSS1P5
BP
CDR04 (1812) & MSS1P6
100
1.2 nF
3.3
D TE
losses
ANnF
C
www.vishay.com
Surface Mount Multilayer Ceramic
Chip Capacitors
BX
CDR04 (1812)
100
39 nF
Vishay General
Semiconductor
• High
efficiency
BX
CDR06 (2225)
50
F
390 n
MIL Qualified, Type
CDR
N
O 180 nF
CDR31 (0805)
BP
CDR32 (1206)
• Federal stock control number,
BX
CDR32 (1206)
CAGE CODE SHV71
MSS1P5 & CDR33
MSS1P6
BP Chip Capacitors
(1210)
Surface Mount Multilayer Ceramic
I
INNOVAT
Bottom View
100
F
1.0 p
F
680 p
100
F
470 p
F
18 n
100
F
1.0 p
F
2.2 n
1 9 3922-A111
100
F
4.7 n 10 s,
F
n
• Solder
dip
265 °C max.
per JESD
62-2012
FEATURES
• High
reliability tested per MIL-PRF-55681
100
1.0 nF
3.3 nF
BX
CDR33 (1210)
100
15 nF
Vishay
General
Semiconductor
MIL
Qualified, Type
CDR
• Tin/lead
termination
codes
“Z” and “U”
• Very
low profile
-Chip
typical
heightCapacitors,
of 0.65 mm accordance to WEEE 2002/96/EC
Multilayer
Ceramic
BP
CDR34 (1812)
100
2.2 nF
• Compliant to RoHS directive 2002/95/EC
and in
100 nF
10 nF
• Lead (Pb)-free termination codes “W”, “Y”, “M”
PRIMARY CHARACTERISTICS
eSMP TM Series
Qualified,
Surface Mount Schottky Barrier
Rectifiers
O L OGY
BP
Top View
HN
Multilayer Ceramic
Chip Capacitors
CDR-MIL-PRF-55681 • Meets MSL level 1, per J-STD-020, LF maximum
peak of 260 °C
Vishay Vitramon
CDR
FEATURES
BX Barrier Rectifiers
CDR31 (0805)
Surface
MicroSMP
NewMount
Product Schottky
www.vishay.com
• Military
qualified products
F
470 n
Type CDR
BX• Ideal for automated placement
CDR34 (1812)
FEATURES
• Wet build process
100
F
27 n
F
n
• Halogen-free
according
to IEC 180
61249-2-21
I
1.0 A
BP
CDR35 (1825)
100
F
4.7 n
F
22 n
•F(AV)
Military
qualified
products
• Low
forward
voltage
drop,
low power definition
• Reliable
Noble
Metal Electrode
(NME)
system
BX
CDR35
100
F
56 n
F
470 n
V
50 V, 60
V (1825)
• RRM
Federal
stock
control
number,
• Compliant
to RoHS
Directive 2011/65/EU
losses
CAGENote
CODE SHV71
IFSM
25 A61249-2-21 definition
•• Halogen-free
to chart
IEC
Detail ratingsaccording
see selection
• High
efficiency
reliability
tested
per MIL-PRF-55681
Note
VF at•IFHigh
= 1.0
A
0.52 V
MECHANICAL DATA
FEATURES
* Pb
are
not“U”
RoHS compliant, exemptions
• Tin/lead
termination
codes
“Z”
and
Bottom
View
• containing
Meetsterminations
MSL
level
1,°C
per- J-STD-020,
LF Case:
maximum
ORDERING
INFORMATION
Vishay
Vitramon
T
max.
may
apply
MicroSMP
• Very low
profile
- typical
height
of150
0.65
mmMILITARY
J
•
Lead
(Pb)-free
termination
codes
“W”,
“Y”,
“M”
MicroSMP
peak of BX
260 °C
CDR31
102
A
K
Y
S
A
T
Molding
compound meets UL 94 V-0 flammability
APPLICATIONS
• Wet
build process
• Ideal for
automated
placement
Capacitors - Military Established Reliability
CDR-MIL-PRF-55681
y.com
Top View
TM
eSMP Series
Mount Multilayer
Ceramic Chip Capacitors
•
MIL Qualified, Type CDR
Top View
MILITARY
DIELECTRIC
CAPACITANCE
DC
CAPACITANCE
TERMINATION
FAILURE
•Note
Tin/lead
codes “Z” and “U”
VF at IFtermination
= 1.0 A
0.52 V•
• Avionic systems
CDR34
102 = 1000 pF
PACKAGING
U = Hot solder
Polarity: Color
band denotes the cathode end
dipped
MECHANICAL
DATA
Solder dip 265CDR35
°C max. 10 s, per
JESD
22-A111
1R8
= 1.8 pF
• Sonar systems
Electrical
characteristics
at codes
+ 25 °C“W”,
unless
otherwise
specified
•• Lead
termination
“Y”,
T(Pb)-free
150
°C“M”
(min. of 4 % lead) (3)
Case: MicroSMP
J max.
• Compliant
to systems
RoHS directive 2002/95/EC and in
• Satellite
•Operating
Wet buildTemperature:
process
Aging
Rate: compound meets UL 94 V-0 flammability
- 55 °C to + 125 °C
Molding
• Missiles
accordance
toapplications
WEEE 2002/96/EC
• Reliable Noble Metal Electrode (NME) system
MAXIMUM RATINGS
(TA =
°C unless otherwise noted)
BP: rating
0 % maximum
per25
decade
PRIMARY CHARACTERISTICS
Capacitance Range: 1.0 pF to 470 nF
• Geographical
information
BX: 1 % maximum
persystems
decade
• Compliant to RoHS Directive 2011/65/EU • Halogen-free
according
tohalogen-free
IEC 61249-2-21
PARAMETER
MSS1P5
Base
P/N-M3
and RoHS SYMBOL
compliant,
IF(AV)
1.0 A
• Global positioning systems
•Voltage
Halogen-free
to IEC
Range: according
50 VDC to 100
VDC61249-2-21 definition
definition
Insulation
Resistance
(IR):
TYPICAL APPLICATIONS
commercial
grade
Device
marking code
15
V
50 V, 60 V
RRM
MARKING
• Solder
dip 265 °CNOMINAL
max.
10 s, per JESD 22-A111
• Avionic
rating (2)
STYLE
RATE
• Reliable
Noblesystems
Metal Electrode (NME)
system VOLTAGE TOLERANCE
Low forward
voltage
drop, 2011/65/EU
low CODE
power RATING (1)
• Sonar
systems
• Compliant
RoHS Directive
• toCompliant
to RoHS directive 2002/95/EC
andP/N-M3
in
Base
- halogen-free and RoHS compliant,
losses Halogen-free
• Satellite
systems
CDR01
A=
BP andto
BXIEC
Expressed
in definition
A = 50 V
C = ± 0.25 pF M = Silver Palladium M = 1.0 %
according
61249-2-21
accordance
to WEEE
2002/96/EC
TYPICAL •APPLICATIONS
FEATURES
CDR02 applications
Unmarked
picofarads (pF). B = 100 V
D commercial
= ± 0.5 pF
Y =grade
Ni barrier with
P = 0.1 %
PRIMARY CHARACTERISTICS
Note • Missiles
CDR03
The first two
F=±1%
100 % tin
R = 0.01 %
Highin
efficiency
• Military qualified products
For• use
low
voltage
high
frequency
inverters,
•
Halogen-free
according
to
IEC
61249-2-21
* Pb containing
are not systems
RoHS
exemptions JTerminals:
• Geographical
information
CDR04terminations
digitscompliant,
are
=±5%
W =Matte
Ni barrier tin
with plated
S = 0.001leads,
%
IF(AV)
1.0 A
solderable per
• Federal
stock control number,
apply
CDR06
significant,
thepolarity
K = ± 10 %
100 % tin
Consult
freewheeling, maydc-to-dc
converters,
and
definition
Bottom View
Global
positioning
systems
LF
50 V, 60•V Meets MSL• level
JESD
CDR311, per J-STD-020,
third is
a maximum
MJ-STD-002
= ± 20 %
Z and
= Ni barrier
with22-B102
RRM SHV71
factory for
CAGEVCODE
protection
CDR32
multiplier.
tin/lead plate
MicroSMP I
failure rate
APPLICATIONS
peak applications.
of
260 °C
M3 suffix meets
class 1A whisker test
25 A
•ELECTRICAL
High reliability
tested per MIL-PRF-55681
SPECIFICATIONS
FSM
CDR33
Examples:
min. 4 JESD
% lead 201 status
Note
ELECTRICAL
SPECIFICATIONS
Capacitance
(TCC): inverters,
For Temperature
use
in
lowCoefficient
voltageofare
high
frequency
* Pb containing
terminations
not RoHS
compliant,
exemptions
At + 25 °C and rated voltage 100 000 M minimum or
T = 7" reel/plastic tape
J = 7" reel (low quantity)
C = 7" reel/paper tape
R = 11 1/4"/13"
reel/plastic tape
P = 11 1/4"/13"
MSS1P6 reel/paper
UNIT
tape
B = Bulk
16
Maximum repetitive Notes
peak
reverse voltage
VRRM per
50
60
Terminals:
1000
F,
whicheverMatte
is less tin plated leads, solderable
(1) DC
apply ± 30 ppm/°C from - 55 °C to + 125 °C,
Note freewheeling,
voltage rating should not be exceeded in application. Other application factors may affect the MLCC performance.
BP:may
0 ppm/°C
dc-to-dc converters, and
polarity
rectified
current
(fig. 1)
IF(AV)
1.0
Consult
for questions:
[email protected]
J-STD-002
and JESD
22-B102
VF at IF = 1.0• AElectrical characteristics
0.52
at +V25 °C unless otherwiseMaximum
specifiedaverage forward
MECHANICAL
DATA
with 0 VDC applied
www.vishay.com
IFSM
25 A
TJ max.
protection
applications.
APPLICATIONS
Dielectric
Strength
Test:
(2) Available
tolerances
please see rating chart
M3 suffix
meets
JESD
201
class 1A whisker test
Peak
forward
surgePerformed
current
8.3
single
half
(3)
Case:
MicroSMP
MIL-PRF-55681
“U” termination
part number have increased dimensions
perms
method
103
ofsine-wave
EIA-198-2-E.
IFSM
Aging
Rate:
superimposed
on rated
load
DC
Applied
test voltages:
Polarity:
Color band denotes the cathode end
Molding BP:
compound
meets
UL% of94rated
V-0
flammability
0%
maximum
per 250
decade
• Sonar systems

100
V
-rated:
voltage
DC
DIMENSIONS
in inches
(millimeters)
BX: Range:
+ 15 %,1.0
- 25
55 °C to + 125 °C,Operating junction and
storage temperature
range
TJ, TSTG
Capacitance
pF%tofrom
470-nF
rating BX: 1 % maximum per decade
• Satellite
systems
with 100
% rated VDC applied
Revision: 29-Feb-12
2
VoltageMAXIMUM
Range:
50 Vapplications
to 100 VDC (T = 25 °C unless
• Missiles
DCRATINGS
Baseotherwise
P/N-M3
- halogen-free
Insulation
Resistance (IR): and RoHS compliant,
noted)
BX: ± 15 % from150
- 55°C
°C to + 125 °C,
Operating•Temperature:
- 55 °C to + 125 °C
Avionic
with 0systems
V applied
Dissipation Factor (DF):
V
CDR-MIL-PRF-55681
A
Vishay Vitramon
25
A
- 55 to + 150
°C
Document Number: 45026
W
For technical
L questions, contact: [email protected]
A
• Geographical information systems
THIS DOCUMENT
IS SUBJECT
CHANGE
WITHOUT
TYPICAL APPLICATIONS
At +grade
25 °C
and
rated voltage
100 000TO
M
minimum
or NOTICE.
commercial
PARAMETER
SYMBOL
MSS1P5
MSS1P6
UNIT THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
Temperature
of Capacitance (TCC):
BP: Coefficient
0.15 % maximum
T
•BX:
Global
positioning
systems
1000 F, whichever is less ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
2.50
maximum
For use in low BP:
voltage
high
frequency
0 ppm/°C
±
30 %
ppm/°C
from -inverters,
55 °C to + 125 °C,
Device
marking
code
15
16
MAX.
Terminals:
Matte
tin
plated
leads,
solderable
per
Test frequency:
with 0 Vconverters,
DC applied
freewheeling, dc-to-dc
Dielectric Strength
Maximum
repetitive
reverse
voltage  1000 pF
VRRM Test:
50
60
V
CATIONS
1 MHz
± 50 peak
kHzand
for
BP polarity
capacitors
J-STD-002
JESD 22-B102
P
Newand
Product
BX: ± 15
% from
- for
55 BX
°C forward
to
+ 125
°C,
and
capacitors
 100current
pF
protection applications.
per
method 103 of EIA-198-2-E.
Maximum
average
rectified
(fig. 1) M3 suffixPerformed
IF(AV)
1.0 test
A
meets JESD
201 class 1A whisker
with 0 VDCAll
applied
other BP and BX at 1 kHz ± 50 Hz
Applied test voltages:
MSS1P5 & MSS1P6
t + 25 °C unless otherwise specified
LENGTH
WIDTH
MAXIMUM
Peak forward surge current 8.3 ms single half sine-wave
100 VDC
-rated:
250 % of STYLE
ratedcathode
voltage25 end
MIL-PRF-55681
A
IFSM
Polarity:Color
band
denotes
the
BX: + 15
%, - 25 % from
- 55load
°C to + 125 °C,
(L)
(W)
THICKNESS (T)
superimposed
on rated
Aging
Rate:VDC applied
5 °C to + 125 °C
with 100
% rated
CDR01 - 0.080
±
± 0.38)
0.050
0.055 (1.40)
Revision:
29-Feb-12
Number:
45026
55 to Document
+ 0.015
150 (2.03
°C± 0.015 (1.27 ± 0.38)
Operating
junction
and storage
temperature range
TJ, TSTG
1
BP:
0%
maximum
per decade
to 470 nF
For technical
questions,
contact:
[email protected]
Document
Number:
89018
For technical
your±region,
please
contact
of the following:
Dissipation
Factor
(DF):
CDR02questions
0.180 ± within
0.015 (4.57
0.38) 0.050
± 0.015
(1.27one
± 0.38)
0.055 (1.40)
BX:
1 % maximum
per decade
/1
MAXIMUM RATINGS
(TATHIS
= DOCUMENT
25 °C unless
otherwise
noted)
IS SUBJECT
TO CHANGE
WITHOUT16-Jun-09
NOTICE. THE PRODUCTS
DESCRIBED HEREIN AND THIS DOCUMENT
Revision:
[email protected],
[email protected], [email protected]
BP: 0.15 % maximum
CDR03
0.180 ± 0.015 (4.57 ± 0.38) 0.080 ± 0.015 (2.03 ± 0.38)
0.080 (2.03)
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
0 VDC
Insulation
BX: 2.50 %
maximumResistance (IR):
PARAMETER
SYMBOL
MSS1P5
MSS1P6
UNIT
CDR04
0.180 ± 0.015
(4.57 ± 0.38) 0.125 ± 0.015 (3.20 ± 0.38)
0.080 (2.03)
ELECTRICAL
= 25 °C
Test
frequency:
At + 25 °C andCHARACTERISTICS
rated voltage 100 000 M(T
minimum
or unless otherwise noted)
A
Capacitance
(TCC):
Device marking code
16
/315
CDR06
0.225 ± 0.020 (5.72 ± 0.51) 0.250 ± 0.020 (6.35 ± 0.51)
0.080 (2.03)
1 MHz
± 50F,
kHzwhichever
for BP capacitors
1000
is less  1000 pF TEST CONDITIONS
PARAMETER
SYMBOL
TYP.
MAX.
UNIT
rom - 55
°C to + 125
°C, peakand
/750
CDR31
0.078 ± 0.008V(2.00 ± 0.20) 0.049 ± 0.008 (1.25 ± 0.20)
0.051 (1.30)
for BXvoltage
capacitors  100 pF
Maximum
repetitive
reverse
VRRM
60
0.45
IF = 0.5 A
Dielectric
Test:
All other
BP and Strength
BX at 1 kHz
± 50 Hz
/8
CDR32
0.125 ± 0.008A(3.20 ± 0.20) 0.062 ± 0.008 (1.60 ± 0.20)
0.051 (1.30)
TJ = 25 °C
Maximum average forward rectified current (fig. 1)
IF(AV)
1.0
=
1.0
A
I
0.56
0.68
F
Maximum
instantaneous
+ 125 °C,
Performed
per method 103 of EIA-198-2-E.
/9 VF
CDR33
0.125 ± 0.010 (3.20 ± 0.25) 0.098V± 0.010 (2.50 ± 0.25)
0.059 (1.50)
(1)
forward
voltage
Peak forward surge current 8.3
ms single
sine-wave
Applied
test half
voltages:
IF = 0.5 A I
0.40
25
/10
CDR34
0.176 ± 0.010A(4.50 ± 0.25) 0.125 ± 0.010 (3.20 ± 0.25)
0.059 (1.50)
TJ = 125 °C
FSM
superimposed on rated
load29-Feb-12
IF = 1.0 A
0.52 Document Number:
0.60 45026
 100 VDC-rated: 250 % of rated voltage
Revision:
www.vishay.com
1
5 °C to + 125 °C,
Vishay General Semiconductor
MAXIMUM
0.010 (0.25)
0.030 (0.75)
0.010 (0.25) www.vishay.com
0.030 (0.75)
0.010 (0.25)
0.030 (0.75)
0.010 (0.25)
0.030 (0.75)
0.010 (0.25)
0.030 (0.75)
0.012 (0.30)
0.028 (0.70)
0.012 (0.30)
0.028 (0.70)
1
0.010 (0.25)
0.030 (0.75)
CDR-MIL-PRF-55681
/11
CDR35
0.176 ± 0.012 (4.50 ± 0.30)
For technical
questions,
contact:
[email protected]
pplied Operating junction and storage
Document
Number: 89018
For technical
questions
your region,
please
one of 20
the following: °C
TTSTG
- 55contact
to + 150
temperature
range
TJ, within
150
J = 25 °C
Maximum
reverse
current (2)TO
IR
Rated VRNOTICE.
THIS
DOCUMENT
IS SUBJECT
CHANGE WITHOUT
THE
DESCRIBED
HEREIN
Revision:
16-Jun-09
[email protected],
[email protected]
125 PRODUCTS
°C
TJ [email protected],
7.0AND THIS DOCUMENT
12
J SET FORTH AT www.vishay.com/doc?91000
ARE SUBJECT TO SPECIFIC DISCLAIMERS,
QUICK REFERENCE DATA
Typical junction capacitance
Revision 29-Feb-12
capacitors  1000 pF
100 pF
kHz ± 50 Hz
TERM. (P)
MINIMUM
4.0 V, 1 MHz
Notes
(1)
Pulse test: 300 µs pulse width, 1 % duty cycle
(2)
Pulse test: Pulse width ≤ 40 ms
40 in inches (millimeters)
“U” CTERMINATION
J
BX
CDR31
BP
CDR32
to CDR35
CDR01 (0805)
0.023 (0.60)
100
CDR02 (1805)
0.023 (0.60)
100
CDR02 (1805)
100
CDR03 (1808)
100
MIL-C-55681
QUALIFIED,
TYPE
CDR
SYMBOL
MSS1P5
MSS1P6
BX
MILITARY TYPE
For technical questions, contact: [email protected]
BP
Document
Number: 89018
For technical questions within your region, please contact one ofDESIGNATION
theRθJA
following:
JECT TO
CHANGE
WITHOUT NOTICE.Typical
THE
PRODUCTS
DESCRIBED
AND THIS DOCUMENT [email protected]
(1) HEREIN
Revision:
16-Jun-09
[email protected],
[email protected],
thermal resistance
BX RθJL
UBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
pF
LENGTH MAXIMUM VOLTAGE
WIDTH/THICKNESS
STYLE (CASE)
(V)
MINIMUM
0.020 (0.51)
0.015 (0.38)
CDR01 (0805)
100
F
0.025 (0.64)
0.015 (0.38) 10 p
BX
Document Number: 45026
CDR01BP
R
BX θJC
CDR01BP100B_
__
40
CDR06
100 (2225)
10
50
BP
CDR32 (1206)
100
CDR01BP220B_ _ _
220
22
BX
CDR32 (1206)
100
CDR01BP270BJ_ _
270
27
BP
CDR33 (1210)
100
CDR01BP330B_ _ _
330
33
ORDERING INFORMATION (Example)
BX
CDR33
100
CDR01BP390BJ_
_
390 (1210)
39
PREFERRED P/N
UNIT WEIGHT (g)
PREFERRED PACKAGECDR01BP470B_
CODE
BASE
DELIVERY MODE
BP
100
_ _QUANTITY CDR34
470 (1812)
47
CDR01BP560BJ_
_ 4500
560
56 and100
BX
CDR34
(1812) plastic tape
MSS1P6-M3/89A
0.006
89A
7" diameter
reel
CDR01BP680B_
__
680 (1825)
68
BP
CDR35
100
CDR01BP820BJ_
_
820 (1825)
82
BX
CDR35
100
CDR01BP101B_ _ _
101
100
Note
CDR01BP121B_
_
_
121
120
• Detail ratings see selection chart
CDR01BP151B_ _ _
151
150
RATINGS AND CHARACTERISTICS CURVES
CDR01BP181B_ _ _
181
180
(TA = 25 °C unless otherwise noted)
A
ORDERING INFORMATION - MILITARY
2/2
F
0.012 (0.30) 120 p
F
0.012 (0.30) 220 p
3.9 nF
F
330 p
UNIT
CDR03 (1808)
100
CAPACITANCE
CAPACITANCE
CAPACITANCE
CDR04
(1812)
100
www.vishay.com
125
CODE
(pF)
TOLERANCE
1
30
°C/W
CDR04
(1812)
100
Note
BP
CDR31
100
CDR01BP120BJ_
_
120 (0805)
12
(1) Thermal resistance from junction to ambient and junction to lead mounted on P.C.B. with 6.0 mm x 6.0 mm copper pad areas R
θJL
CDR01BP150B_
__
150 (0805)
15 is measured
BX
CDR31
100
body
at the terminal of cathode band. RθJC is measured at the top center of the
CDR01BP180BJ_
_
180
18
PRODUCT SHEET
0.059 (1.50)
STYLE
DIELECTRIC
CDR01
BP
CDR02
to CDR06
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise
noted)
BP
1PARAMETER
0.250 ± 0.012 (6.40 ± 0.30)
www.vishay.com
µA
1
mA
0.010 (0.25)
0.030 (0.75)
Vishay Vitramon
0.032 (0.80)
0.008 (0.20)
CAPACITANCE
PACKAGING CODES
MAXIMUM
“C”, “J”, “P”, “B”
F
“T”, “J”, 180
“R”,p“B”
F
“C”, “J”, 4.7
“P”,n“B”
F
“T”, “J”, 270
“R”,p“B”
22 nF
F
1.0 n
12 nF
68 nF
RATED TEMP. AND
VOLTAGE
1.2 nF
3.3 nF
VOLTAGE TEMP. LIMITS
(DC)
39 nF
180 nF
F
390 n
J,
K
F
1.0 p
J
J, K
F
470 p
J
F
1.0 p
J, K
F
4.7 n
J
1.0 nF
J, K
15 nF
J
2.2 nF
J, K
J
F
27 n
J, K
F
4.7 n
J
F
56 n
J, K
J, K
J, K
J, K
F
470 n
BP
F
680 p
BP
BP
F
18 n
BP
F
2.2 n
BP
F
39 n
BP
3.3 nF
BP
100 nF
BP
100
100
100
100
100
100
100
100
10 nF 100
BP
BP
F
180 n 100
BP
F
22 n 100
BP
F
470 n 100
BP
100
BP
100
BP
100
BP
100
VMN-PT9142-1206
CDR31
BX
102
A
K
Y
S
A
T
Revision: 29-Feb-12
Document Number: 45026
3
0.7
MILITARY DIELECTRIC CAPACITANCED For
DCD = 0.8questions,
CAPACITANCE
TERMINATION
FAILURE
MARKING PACKAGING
= 0.5technical
contact: [email protected]
D = 0.3
Resistive or Inductive Load
STYLE
NOMINAL
VOLTAGE TOLERANCE (2)
RATE
THIS0.6
DOCUMENT IS D
SUBJECT
TO CHANGE
WITHOUT
NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
(1)
RATING
= 0.2CODE
1.0
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
This document is subject to change without notice. THE PRODUCTS
DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO
CDR01 0.5 BP and BX
A=
Expressed
in
A
=
50
V
C
=
± 0.25 pF M = Silver Palladium M = 1.0 %
D = 0.1
CDR02
Unmarked
picofarads (pF). B = 100 V D =D1.0= ± 0.5 pF
Y = Ni barrier with
SPECIFIC DISCLAIMERS,
SET FORTH AT www.vishay.com/doc?91000
0.8
P = 0.1 %
CDR03
The first two
F=±1%
100 % tin
R
=
0.01
%
0.4
CDR04
digits are
J=±5%
W = Ni barrier with S = 0.001 %
0.6
wer Loss (W)
ectified Current (A)
1.2