V I S H AY I N T E R T E C H N O L O G Y, I N C . MULTILAYER CERAMIC CHIP CAPACITORS HV High Voltage Series High-Voltage SMD MLCC Capacitors KEY BENEFITS • High breakdown voltage increases reliability against voltage spikes • Serial electrode design reduces risk of short circuit due to mechanical cracks APPLICATIONS • Input / output filtering in power supplies and analog and digital modems • Snubber capacitor in power converters • Buffer capacitor in voltage multipliers RESOURCES • Datasheet: HV High Voltage Series - www.vishay.com/doc?45228 • For technical questions contact [email protected] • Material categorization: for definitions please see www.vishay.com/doc?99912 A WORLD OF SOLUTIONS PRODUCT SHEET 1/2 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VMN-PT0472-1601 www.vishay.com • Protectiv prevent V I S H AY I N T E R T E C H N O L O G Y, I N C•. Wet buil • Reliable • Material please s MULTILAYER CERAMIC CHIP CAPACITORS HVHVHigh Voltage SeriesAPPLICA High Voltage Series www.vishay.com Vishay Vitramon Surface-Mount Multilayer Ceramic Chip Capacitor Solutions Surface Mount Multilayer Ceramic Chip Capacitor Solutions for High-Voltage Applications for High Voltage Applications • • • • • Input filt Output f Snubber Filtering For light mlcc@vi ELECTRICAL SPECIFICATIONS FEATURES X7R • Excellent reliability and thermal shock performance GENERAL SPECIFICATION • High voltage breakdown compared to Note standard design at +25 °C unless otherwise specified Electrical characteristics • High reliable serial electrode design Operating Temperature: -55 °C to +125 °C • Protective surface coating may be required to Capacitance Range: 180 pF to 15 nF prevent surface arcing • Wet build process Voltage Range: 3000 VDC, 4000 VDC, 5000 VDC • Reliable Noble Metal Electrode (NME) system Temperature Coefficient of Capacitance (TCC): Material categorization: definitions of compliance ±•15 % from -55 °C to +125 °C,forwith 0 VDC applied please see www.vishay.com/doc?99912 Dissipation Factor (DF): 2.5 % maximum at 1.0 VRMS and 1 kHz APPLICATIONS • Input filter capacitors Insulating Resistance: at•+25 °C 100 000 M min. or 1000 F whichever is less Output filter capacitors at +125 °C 10 000 M min. or 100 F whichever is less • Snubber capacitors reduce MOSFET voltage spikes Aging Rate:for 1% maximumpower per decade • Filtering switching supplies ENVIRONMENTAL STATUS TERMINATION CODE • For lighting andTest: other AC applications please contact: Dielectric Strength performed per method 103 of EIA 198-2-E [email protected] Applied test voltages 3000 VDC- / 4000 VDC- / 5000 VDC-rated: min. 120 % of rated voltage Vishay Vitramon X HV High Voltage Series TERMINATION DESCRIPTION Ni barrier 100 % tin plated matte finish RoHS COMPLIANT ELECTRICAL SPECIFICATIONS www.vishay.com VISHAY GREEN X7R Yes Y es QUICK REFERENCE DATA GENERAL SPECIFICATION Note MAXIMUM VOLTAGE DIELECTRIC CASE otherwise specified Electrical characteristics at +25 °C unless (V) CAPACITANCE MINIMUM 5000 Revision: 05-Aug-15 180 pF Operating Temperature: -55 °C1812 to +125 °C 1825 X7R Capacitance Range: 180 pF to 15 nF 2220 5000 5000 2225 5000 Voltage Range: 3000 VDC, 4000 VDC, 5000 VDC MAXIMUM 1 3.9 nF For technical questions, contact: mlcc@v 330 pF 10 nF THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUC 390 ARE pF SUBJECT TO SPECIFIC 10 nFDISCLAIMERS, SET FORTH AT 470 pF 15 nF Note • Temperature Detail ratings see “Selection Chart” Coefficient of Capacitance (TCC): ± 15 % from -55 °C to +125 °C, with 0 VDC applied ORDERING INFORMATION Dissipation Factor (DF): 2.5 % maximum and 1 kHz HV2220 Y at 1.0 VRMS152 K X CASE DIELECTRIC CAPACITANCE CAPACITANCE TERMINATION Insulating Resistance: NOMINAL CODE TOLERANCE at +25 °C 100 000 M min.CODE or 1000 F whichever is less at +125 °C 10 000 M min. or 100 F whichever is less 1812 Y = X7R Expressed in J=±5% 1825 Rate: 1 % maximum picofarads (pF). K = ± 10 % Aging per decade Revision 05-Aug-15 2220 2225 The first two M = ± 20 % digits are Dielectric Strength Test: significant, performed per method 103 of EIA the third is a198-2-E multiplier. Applied test voltages Examples 3000 VDC- / 4000 VDC- / 5000 VDC-rated: 152 = 1500 pF X = Ni barrier 100 % tin plated matte finish M A T HV (2) DC VOLTAGE RATING (1) MARKING PACKAGING PROCESS CODE H = 3000 V V = 4000 V M = 5000 V A= unmarked HV = high voltage T = 7" reel / plastic tape R = 11 1/4" / 13" reel / plastic tape min. 120 % of rated voltage Notes (1) DC voltage rating should not be exceeded in application. Other application factors may affect the MLCC performance. Consult for questions: [email protected] (2) Process code with 2 digits has to be added. PRODUCT SHEET ENVIRONMENTAL STATUS Revision: 05-Aug-15 2/2 VMN-PT0472-1601 Document Number: 45228 1 TERMINATION RoHS COMPLIANT VISHAY GREEN ForNOTICE. technicalDESCRIPTION questions, contact: [email protected] THIS DOCUMENTTERMINATION IS SUBJECTCODE TO CHANGE WITHOUT THE PRODUCTS DESCRIBED HEREIN AND SUBJECT DISCLAIMERS, TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT X Ni barrier 100 % tin plated matte Yes Yes THIS DOCUMENT THIS ARE DOCUMENT SUBJECT TOISSPECIFIC SET FORTH ATfinish www.vishay.com/doc?91000 www.vishay.com ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000