DSCC 05007 www.vishay.com Vishay Vitramon Surface Mount Multilayer Ceramic Chip Capacitors DSCC Qualified Type 05007 FEATURES • US defense supply center approved Available • Federal stock control number, CAGE CODE 2770A Available • Case size 1206 • Stable BP, BR and BX dielectrics • Excellent aging characteristics • Tin / lead termination code “Z” and “U” • Lead (Pb)-free termination code “M” • Wet build process • Reliable Noble Metal Electrode (NME) system • Made with a combination of design, materials and tight process control to achieve very high field reliability • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 Note * This datasheet provides information about parts that are RoHS-compliant and / or parts that are non-RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in this datasheet for details. APPLICATIONS • • • • • • Avionic application Sonar applications Satellite systems Missiles applications Geographical information systems Global positioning systems ELECTRICAL SPECIFICATIONS Note • Electrical characteristics at +25 °C unless otherwise specified Operating Temperature: -55 °C to +125 °C Capacitance Range: BP: 1.0 pF to 6.8 nF BR: 820 pF to 560 nF BX: 820 pF to 470 nF Voltage Range: 16 VDC to 200 VDC Temperature Coefficient of Capacitance (TCC): BP: 0 ppm/°C ± 30 ppm/°C from -55 °C to +125 °C with zero (0) VDC applied BP: 0 ppm/°C ± 30 ppm/°C from -55 °C to +125 °C with 100 % rated VDC applied BR: ± 15 % from -55 °C to +125 °C with zero (0) VDC applied BR: +15 %, -40 % from -55 °C to +125 °C with 100 % rated VDC applied BX: ± 15 % from -55 °C to +125 °C with zero (0) VDC applied BX: +15 %, -25 % from -55 °C to +125 °C with 100 % rated VDC applied Revision: 06-Jun-16 Dissipation Factor (DF): BP: 0.15 % max. at 1.0 VRMS and 1 MHz for values 1000 pF 0.15 % max. at 1.0 VRMS and 1 kHz for values > 1000 pF BR and BX: 25 V: 3.5 % max. at 1.0 VRMS and 1 kHz 50 V: 2.5 % max. at 1.0 VRMS and 1 kHz Aging Rate: BP: 0 % maximum per decade BR, BX: 1 % maximum per decade Insulation Resistance (IR): at +25 °C and rated voltage 100 000 M minimum or 1000 F, whichever is less at +125 °C and rated voltage 10 000 M minimum or 100 F, whichever is less Dielectric Strength Test: performed per method 103 of EIA-198-2-E. Applied test voltages 200 VDC-rated: 250 % of rated voltage Document Number: 45049 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DSCC 05007 www.vishay.com Vishay Vitramon QUICK REFERENCE DATA DIELECTRIC CAPACITANCE MAXIMUM VOLTAGE (V) CASE MINIMUM MAXIMUM BP 1206 200 1.0 pF 6.8 nF BR 1206 100 820 pF 470 nF BX 1206 100 820 pF 470 nF Note • Detail ratings see “Selection Chart” ORDERING INFORMATION 05007- BP 101 B J X - T DSCC NUMBER DIELECTRIC CAPACITANCE NOMINAL CODE DC VOLTAGE RATING (1) CAPACITANCE TOLERANCE TERMINATION GROUP C TESTING OPTION (2) PACKAGING Case code 1206 BP BR BX Expressed in picofarads (pF). The first two digits are significant, the third is a multiplier. An “R” indicates a decimal point. Examples: 1R8 = 1.8 pF 101 = 100 pF X = 10 V Y = 16 V Z = 25 V A = 50 V B = 100 V C = 200 V C = ± 0.25 pF D = ± 0.5 pF F=±1% G=±2% J=±5% K = ± 10 % M = ± 20 % Note: C, D < 10 pF (BP) F, G, J, K, M 10 pF (BP) J, K, M (BR, BX) M = silver palladium Z = Ni barrier with tin / lead plate min. 4 % lead U (2) = hot solder dipped (min. 4 % lead) C = full group C L = 2000 h life test only M = 1000 h life test only H = low voltage humidity test only - = no group C testing T = 7" reel / plastic tape J = 7" reel (low quantity) R = 11 1/4" reel / plastic tape B = bulk Notes (1) DC voltage rating should not be exceeded in application. Other application factors may affect the MLCC performance. Consult for questions: [email protected] (2) “U” termination part number code for DSCC product length, width and thickness dimensions positive tolerances (including bandwidth) above are allowed to increase by the following amounts: length 0.025" (0.64 mm), width / thickness 0.015" (0.38 mm) DIMENSIONS in inches (millimeters) W L T MAX. P PART ORDERING NUMBER 05007- TERMINATION PAD (P) LENGTH (L) WIDTH (W) MAXIMUM THICKNESS (T) MINIMUM MAXIMUM 0.125 ± 0.008 (3.18 ± 0.20) 0.062 ± 0.008 (1.57 ± 0.20) 0.059 (1.50) 0.010 (0.25) 0.030 (0.76) Note • Metric equivalents are given for general information only Revision: 06-Jun-16 Document Number: 45049 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DSCC 05007 www.vishay.com Vishay Vitramon SELECTION CHART DIELECTRIC BP BR STYLE 05007 CASE CODE 1206 VOLTAGE (VDC) 16 25 50 100 200 10 16 25 50 100 VOLTAGE CODE Y Z A B C X Y Z A B CAP. CODE CAP. 1R0 1.0 pF • • • + • 1R2 1.2 pF • • • + • 1R5 1.5 pF • • • + • • • • + • 1R8 1.8 pF 2R2 2.2 pF • • • + • 2R7 2.7 pF • • • + • • • • + • 3R3 3.3 pF 3R9 3.9 pF • • • + • 4R7 4.7 pF • • • + • • • • + • 5R6 5.6 pF 6R8 6.8 pF • • • + • 8R2 8.2 pF • • • + • • • • + • 100 10 pF 120 12 pF • • • + • 150 15 pF • • • + • • • • + • 180 18 pF 220 22 pF • • • + • 270 27 pF • • • + • • • • + • 330 33 pF 390 39 pF • • • + • 470 47 pF • • • + • • • • + • 560 56 pF 680 68 pF • • • + • 820 82 pF • • • + • • • • + • 101 100 pF • • • + • 121 120 pF 151 150 pF • • • + • • • • + • 181 180 pF 221 220 pF • • • + • 271 270 pF • • • + • • • • + • 331 330 pF 391 390 pF • • • + • 471 470 pF • • • + • • • • + • 561 560 pF 681 680 pF • • • + • 821 820 pF • • • + • • • • • • • • • + • • • • • • 102 1.0 nF 122 1.2 nF • • + • • • • • • • 152 1.5 nF • • + • • • • • • • • • + • • • • • • • 182 1.8 nF 222 2.2 nF • • + • • • • • • • • • • • • • • • • • 272 2.7 nF 332 3.3 nF • • • • • • • • • 392 3.9 nF • • • • • • • • • • • • • • • • • • 472 4.7 nF 562 5.6 nF • • • • • • • • 682 6.8 nF • • • • • • • • • • • • • 822 8.2 nF Notes RoHS-compliant except when supplied with lead (Pb)-containing terminations, codes “Z” and “U” Not RoHS-compliant + Use MIL-PRF-55681 (CDR) instead, part numbers removed from DSCC listing Revision: 06-Jun-16 BX 10 X 16 Y 25 Z 50 A 100 B • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • + + + + Document Number: 45049 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DSCC 05007 www.vishay.com Vishay Vitramon SELECTION CHART DIELECTRIC BP BR STYLE 05007 CASE CODE 1206 VOLTAGE (VDC) 16 25 50 100 200 10 16 25 50 100 VOLTAGE CODE Y Z A B C X Y Z A B CAP. CODE CAP. 103 10 nF • • • • • 123 12 nF • • • • • 153 15 nF • • • • • 183 18 nF • • • • • 223 22 nF • • • • • 273 27 nF • • • • • 333 33 nF • • • • • 393 39 nF • • • • • 473 47 nF • • • • • 563 56 nF • • • • • 683 68 nF • • • • 823 82 nF • • • • 104 100 nF • • • • 124 120 nF • • • • 154 150 nF • • • • 184 180 nF • • • • 204 200 nF • • • • 224 220 nF • • • • 254 250 nF • • • 274 270 nF • • • 334 330 nF • • • 394 390 nF • • • 474 470 nF • • 564 560 nF 684 680 nF 824 820 nF 105 1.0 μF Notes RoHS-compliant except when supplied with lead (Pb)-containing terminations, codes “Z” and “U” Not RoHS-compliant + Use MIL-PRF-55681 (CDR) instead, part numbers removed from DSCC listing BX 10 X 16 Y 25 Z 50 A 100 B • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • + + + + + • • • • • + + + • • DSCC PACKAGING QUANTITIES (1) CASE CODE TAPE SIZE 1206 (2) 8 mm 7" REEL QUANTITIES PACKAGING CODE “T” “J” 3000 / 2500 1000 11 1/4" AND 13" REEL QUANTITIES PACKAGING CODE “R” 10 000 / 9000 BULK VIAL PACKAGING CODE “B” 100 Notes (1) Reference: EIA standard RS 481 - “Taping of Surface Mount Components for Automatic Placement” (2) Packaging quantities can depend from product thickness STORAGE AND HANDLING CONDITIONS (1) Store the components at 5 °C to +40 °C ambient temperature and 70 % relative humidity conditions. (2) The product is recommended to be used within a time-frame of 2 years after shipment. Check solderability in case extended shelf life beyond the expiry date is needed. Precautions: a. Do not store products in an environment containing corrosive elements, especially where chloride gas, sulfide gas, acid, alkali, salt or the like are present. This may cause corrosion or oxidization of the terminations, which can easily lead to poor soldering. b. Store products on the shelf and avoid exposure to moisture or dust. c. Do not expose products to excessive shock, vibration, direct sunlight and so on. Revision: 06-Jun-16 Document Number: 45049 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000