VY2 Sample Kit www.vishay.com Vishay BCcomponents VY2 Sample Kit AC Line Rated Ceramic Disc Capacitors Class X1, 440 VAC, Class Y2, 300 VAC FEATURES • Singlelayer AC disc safety capacitors • Complies with IEC 60384-14 4th edition • High reliability • Vertical (inline) kinked or straight leads • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 Available Available The sample kit contains a total of 7 capacitance values with 10 pieces each. SPECIFICATIONS Part number VY21-KIT-HF Class X1, 440 VAC, Class Y2, 300 VAC Capacitors type Temperature coefficient Refer to specified ceramic type Tolerance 10 %, 20 % Capacitance range / E-series Refer to below table Number of capacitance values 7 Capacitors per value / total 10 / 70 Note • The products are specified by the underlying datasheet “VY2 Series” in its latest edition at www.vishay.com/doc?28535 CAPACITANCE VALUE LIST CAPACITANCE (pF) TOLERANCE (%) DIMENSIONS (mm) LEAD SPACING (mm) VY2101K29Y5SG63V7 100 10 7.5 x 5.0 7.5 VY2221K29Y5SG63V7 220 10 7.5 x 5.0 7.5 VY2471K29Y5SG63V7 470 10 7.5 x 5.0 7.5 VY2681M29Y5UG63V7 680 20 7.5 x 5.0 7.5 VY2102M29Y5UG63V7 1000 20 9.0 x 5.0 7.5 VY2222M35Y5UG63V7 2200 20 10.5 x 5.0 7.5 VY2472M49Y5UG63V7 4700 20 12.5 x 5.0 7.5 PART NUMBER Note • The product can be ordered using the PART NUMBER Revision: 17-Feb-16 Document Number: 28554 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VY2 Sample Kit www.vishay.com Vishay BCcomponents LEAKAGE CURRENT VS. VOLTAGE (Typical) 120 3.5 60 Hz, 25 °C 3.0 2.5 60 Hz, 25 °C 100 3900 pF 80 3300 pF Current I (μA) Current I (μA) 100 pF 4700 pF 2.0 1.5 2200 pF 1500 pF 1.0 1000 pF 680 pF 470 pF 330 pF 220 pF 150 pF 0.5 0.0 0 68 pF 60 47 pF 40 33 pF 22 pF 20 10 pF 0 200 400 600 800 1000 1200 1400 1600 1800 2000 2200 2400 2600 0 200 400 600 800 1000 1200 1400 1600 1800 2000 2200 2400 2600 AC Voltage VRMS AC Voltage VRMS Z (Ω) IMPEDANCE VS. FREQUENCY (Typical) 100 10 0.1 nF 1.0 nF 0.68 nF 1 2.2 nF 4.7 nF 0.1 1 10 100 1000 f (MHz) Lead configuration: length = 30 mm, lead spacing: standard, lead diameter: standard, inline crimp Note • The capacitors meet the essential requirements of “EIA 198”. Unless stated otherwise all electrical values apply at an ambient temperature of 25 °C ± 3 °C, at normal atmospheric conditions. Revision: 17-Feb-16 Document Number: 28554 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000