AB40S/D Series AC/DC Power Module 40W, Industrial & Medical Safety FEATURES Fully encapsulated Plastic Case 3 Mounting Versions: - PCB Mounting with Solder Pins - Chassis Mounting with Screw Terminals - DIN-Rail Mounting Package Dimension 88.9x63.5x30.0 mm (PCB Mounting Version) Universal Input 85-264VAC, 47-440 Hz Protection Class ll Extended Operating Temp.Range -40°C to +60°C at full Load LED Output Indicator (Chassis Version Models) Industrial Safety to UL/cUL/IEC/EN 60950-1 and UL508 Medical Safety Approval to UL/cUL/IEC/EN 60601-1 3rd Edition Over Load and Over Temperature Protection 3 Year Product Warranty The AB40S/D series is a range of fully encapsulated AC/DC power modules. These high performance products feature an extended operating temperature range of -40°C to +80°C. Universal input voltage 85-264VAC and UL/IEC/EN safety approvals including medical safety and UL508 listing qualify these power supplies modules for applications in products with worldwide markets.EMI-filter meets EN55022, class B and FCC,part15, class B. The AB40S/D series power modules provide an economical solution for many space critical applications in commercial, medical and industrial electronic equipment. Model Selection Guide Model Number PCB Mounting Output Voltage Output Current Input Current Max. 115VAC, 60Hz 230VAC, 50Hz @Max. Load VDC mA mA(typ.) AB40S0500A 5 8000 716 AB40S1200A 12 3330 AB40S1500A 15 2660 AB40S2400A 24 AB40D1212A AB40D1515A Max. capacitive Load Efficiency (typ.) @Max. Load, 115VAC μF % 429 8000 81 689 414 3900 84 680 408 3900 85 1660 687 413 680 84 ±12 ±1660 687 413 1500# 84 ±15 ±1330 680 408 1000# 85 # For each output DS_AB40S/D_06112014 E-mail: [email protected] http://www.deltaww.com/dcdc P1 Input Specifications Parameter Model AC Voltage Input Range Input Frequency Range Max. Unit --- 264 VAC 47 --- 440 Hz --- 370 VDC --- --- 0.3 W 115VAC --- --- 30 A 230VAC --- --- 60 A No-Load Power Consumption Inrush Current (Cold Start at 25℃) Typ. 85 120 All Models DC Voltage Input Range Min. Output Specifications Parameter Conditions Output Voltage Accuracy Line Regulation Min. Typ. --±2.0 --±0.5 Single Output Model --±1.0 Dual Output Models --±2.0 No minimum Load Requirement 0-20 MHz 5VDC Output Models 1.5 --Ban dwi Other Output Models 1.0 --dth Zener diode clamp 120 ----±0.02 ----85VAC, Hiccup Mode, auto-recovery 105 --(long term overload condition may cause damage) Hiccup mode, indefinite (automatic recovery) Load Regulation Min.Load Ripple & Noise Over Voltage Protection Temperature Coefficient Overshoot Current Limitation Short Circuit Protection Max. Unit --------- % % % % 1.8 %VPP of Vo 1.3 %VPP of Vo ----5 % of Vo %/℃ % --- % Inom. General Specifications Parameter I/O Isolation Voltage (reinforced) Leakage Current I/O Isolation Resistance Switching Frequency Hold-up Time MTBF (calculated) Conditions 500 VDC 115VAC, 60Hz 230VAC, 50Hz MIL-HDBK-217F@25℃, Ground Benign Protection Class II Min. Typ. Max. Unit 4000 --1000 ------- --80 --130 25 80 ------------- VACrms μA MΩ KHz ms ms 200,000 --- --- Hours According IEC/EN 60536 IEC/EN 60950-1, 60601-1 3rd, 2XMOPP cUL/UL 60950-1, 60601-1 3rd, 2XMOPP, UL 508 listed Safety Approvals EMC Specifications Parameter Conducted and radiated EMI ESD Radiated immunity Fast transient Surge Conducted immunity PFMF Dips Interruptions DS_AB40S/D_06112014 Standards & Level Performance EN55011, EN55022, FCC part 15 EN61000-4-2 air ± 8kV , Contact ± 4kV EN61000-4-3 10V/m EN61000-4-4 ±2kV EN61000-4-5 ±1kV EN61000-4-6 10Vrms EN61000-4-8 30A/m EN61000-4-11 30% 10ms EN61000-4-11 >95% 5000ms Class B A A A A A A A B E-mail: [email protected] http://www.deltaww.com/dcdc P2 Environmental Specifications Parameter Conditions Min. Ambient Above +60℃ -40℃ Max. +80℃ 1.5W / ℃ -40℃ +95℃ Shutdown at 90℃ (automatic recovery at approx. 67℃) --95% rel. H Free-Air convection Temperature Range (operational) Power Derating Storage Temperature Range Over Temperature Protection Humidity (non condensing) Cooling Notes 1 2 3 4 5 6 7 8 9 10 This product is not designed for use in critical life support systems, equipment used in hazardous environment, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. Specifications typical at Ta=+25℃, resistive load, 115VAC, 60Hz input voltage, after warm-up time rated output current unless otherwise noted. Ripple & Noise measured with a 0.1μF/50V MLCC and a 1μF/50V Aluminum electrolytic. Safety approvals cover frequency 47-63 Hz. We recommend to protect the converter by a slow blow fuse in the input supply line. Other input and output voltage may be available, please contact factory. To order the module with chassis mount package, please add a suffix C (e.g. AB40S2400C ). To order the module in chassis mount with DIN-Rail kit, please add a suffix D (e.g. AB40S2400D). That “natural convection” is about 20LFM but is not equal to still air (0 LFM). Specifications are subject to change without notice. Package Specifications PCB Mounting Mechanical Dimensions 6 15.9 [0.63] 15.24 [0.60] 12.7 [0.50] 5 4 0.7 [0.03] 3 81.3 [3.20] 31.6 [1.24] 88.9 [3.50] 7 12.7 [0.50] 1.0 [ 0.04] 15.24 [0.60] 30.0 [1.18] 6.0 [0.24] Pin Connections Pi Single Output n 1 AC (N) AC (N) 2 AC (L) AC (L) 3 +Vout +Vout 4 No Pin No Pin 5 -Vout Common 6 No Pin No Pin 7 NC -Vout NC: No Connection Bottom View 1 5.0 [0.20] Mounting M4.0 Thread 2 Dual Output ►All dimensions in mm (inches) 55.88 [2.20] ►Tolerance: 63.5 [2.50] ►Pin ±0.5 (±0.02) diameter 1.0 ±0.1 (0.04±0.004) Physical Characteristics Case Size : 88.9x63.5x30.0mm (3.50x2.50x1.18 inches) Case Material : Plastic resin (flammability to UL 94V-0 rated) Pin Material : Copper Alloy with Gold Plate Over Nickel Subplate Weight : 310g DS_AB40S/D_06112014 E-mail: [email protected] http://www.deltaww.com/dcdc P3 Package Specifications Chassis Mounting (order code suffix C) Mechanical Dimensions Connections Pi Single Output n Indication LED 2 Top view 1 63.8 [2.51] 7 6 5 4 3 50.0 [1.97] 4 x 3.5 DCON POWER "GOOD" INDICATOR 100.0 [3.94] Dual Output 1 AC (N) AC (N) 2 AC (L) AC (L) 3 +Vout +Vout 4 NC NC 5 -Vout Common 6 NC NC 7 NC -Vout 112.0 [4.41] NC: No Connection 92.0 [3.62] 16.8 [0.66] 5.0 [0.20] 34.1 [1.34] 10.0 [0.39] ►All dimensions in mm (inches) ►Tolerance: ±0.5 (±0.02) Physical Characteristics Case Size : 112.0x63.8x34.1mm (4.41x2.51x1.34 inches) Case Material : Plastic resin (flammability to UL 94V-0 rated) Weight : 320g Package Specifications with DIN Rail Mounting Bracket (order code suffix D) Mechanical Dimensions 7 6 5 4 3 Indication LED Top view 2 1 63.8 [2.51] 3.5 50.0 [1.97] 4x DCON POWER "GOOD" INDICATOR 100.0 [3.94] 112.0 [4.41] DS_AB40S/D_06112014 34.1 [1.34] 11.0 [0.43] 3.0 [0.12] 5.0 [0.20] 10.0 [0.39] 16.8 [0.66] 92.0 [3.62] E-mail: [email protected] http://www.deltaww.com/dcdc P4 Physical Characteristics Case Size : 112.0x63.8x34.1mm (4.41x2.51x1.34 inches) Case Material : Plastic resin (flammability to UL 94V-0 rated) Weight : 374g DIN-Rail Mounting Bracket Part Numbering System A B 40 S 05 00 A Product type Family series Watt Number of Outputs Output Voltage I Output Voltage II Option Code AC/DC Power Module Medical application 40 - 40W S - Single 05 - 5V D - Dual 12 - 12V 15 - 15V 24 - 24V 00 - not applicable 12 - 12V 15 - 15V A - PCB Mount C - Chassis Mount D - Din Rail Mount CONTACT: www.deltaww.com/dcdc USA: Telephone: East Coast: 978-656-3993 West Coast: 510-668-5100 Fax: (978) 656 3964 Email: [email protected] Europe: Phone: +31-20-655-0967 Fax: +31-20-655-0999 Email: [email protected] Asia & the rest of world: Telephone: +886 3 4526107 ext 6220~6224 Fax: +886 3 4513485 Email: [email protected] WARRANTY Delta offers a three(3) years limited warranty. Complete warranty information is listed on our web site or is available upon request from Delta. Information furnished by Delta is believed to be accurate and reliable. However, no responsibility is assumed by Delta for its use, nor for any infringements of patents or other rights of third parties, which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Delta. Delta reserves the right to revise these specifications at any time, without notice DS_AB40S/D_06112014 E-mail: [email protected] http://www.deltaww.com/dcdc P5