AJM-24 SERIES AC/DC Power Module 24W, Industrial & Medical Safety FEATURES ►Fully Encapsulated Plastic Case for PCB, Chassis and DIN-Rail Mounting Version ►Universal Input 85~264VAC, 47~440Hz ►Protection Class II as per IEC/EN 60536 ►I/O Isolation 4000VAC with Reinforced Insulation ►Operating Ambient Temp. Range -40℃ to +80℃ ►Overload/Voltage/Temp. and Short Circuit Protection ►Designed-in EMI Emission meets EN55011/22 Class B & FCC Level B ►Designed-in EMC Immunity meets EN61000-4-2,3,4,5,6,8,11 ►Medical EMC Standard meets EMI EN55011 & EMS EN60601-1-2 ►Medical Safety meets 2xMOPP per 3rd Edition of IEC/EN 60601-1 & ANSI/AAMI ES60601-1 ►UL508 Safety Approval Specifically for Industrial Application ►UL/cUL/IEC/EN 60950-1 Safety Approval & CE Marking PRODUCT OVERVIEW The new MINMAX AJM-24 series is a range of fully encapsulated AC/DC power modules. These high performance products feature an extended operating temperature range of -40°C to +80°C. Universal input voltage 85-264VAC and UL/IEC/EN safety approvals including medical safety and UL508 listing qualify these power supplies modules for applications in products with worldwide markets.EMI-filter meets EN55022, class B and FCC,part15, class B. The AJM-24 series power modules provide an economical solution for many space critical applications in commercial, medical and industrial electronic equipment. Model Selection Guide Model Number Output Voltage AJM-24S05 AJM-24S09 AJM-24S12 AJM-24S15 AJM-24S24 AJM-24D12 AJM-24D15 VDC 5 9 12 15 24 ±12 ±15 Output Current Input Current 115VAC, 60Hz 230VAC, 50Hz Max. @Max. Load mA 3000 2666 2000 1600 1000 ±1000 ±800 mA(typ.) 282 424 419 424 409 414 414 Max. capacitive Load Efficiency (typ.) @Max. Load, 115VAC μF 2200 1000 1000 680 470 470# 330# 169 255 252 255 246 249 249 % 77 82 83 82 85 84 84 # For each output Input Specifications Parameter Conditions / Model AC Voltage Input Range Input Frequency Range All Models DC Voltage Input Range No-Load Power Consumption 115VAC Inrush Current 230VAC E-mail:[email protected] 2015/12/25 REV:2 Tel:886-6-2923150 Page 1 of 5 Cold Start at 25℃ Min. Typ. Max. Unit 85 --- 264 VAC 47 --- 440 Hz 120 --- 370 VDC --- --- 0.3 W --- --- 20 A --- --- 40 A AJM-24 SERIES AC/DC Power Module 24W, Industrial & Medical Safety Output Specifications Parameter Output Voltage Setting Accuracy Line Regulation Conditions / Model Min. Typ. --±2.0 Vin=Min. to Max. @Full Load --±0.5 Single Output Model --±0.5 Io=0% to 100% Dual Output Models --±2.5 No minimum Load Requirement 1.5 5V Output Models --0-20 MHz Bandwidth Other Output Models --1.0 Zener diode clamp 120 --±0.02 ----85VAC, Hiccup Mode, auto-recovery 105 --(long term overload condition may cause damage) Hiccup mode, Automatic Recovery Load Regulation Minimum Load Ripple & Noise Over Voltage Protection Temperature Coefficient Overshoot Current Limitation Short Circuit Protection Max. --------- Unit %Vnom. % % % 1.8 1.3 --5 %VPP of Vo %VPP of Vo % of Vo %/℃ % --- %Inom. Max. ------------- Unit VACrms μA MΩ KHz ms ms Hours General Specifications Parameter I/O Isolation Voltage Leakage Current I/O Isolation Resistance Switching Frequency Conditions Reinforced Insulation, Rated For 60 Seconds 500 VDC 115VAC, 60Hz 230VAC, 50Hz MIL-HDBK-217F@25℃, Ground Benign Hold-up Time MTBF (calculated) Protection Class II Min. 4000 --1000 ------- Typ. --80 --132 20 80 400,000 According IEC/EN 60536 UL/cUL 60950-1, CSA C22.2 No 60950-1 ANSI/AAMI ES60601-1, CAN/CSA-C22.2 No. 60601-1 IEC/EN 60950-1, IEC/EN 60601-1 3rd Edition 2xMOPP UL/cUL 60950-1 recognition (UL certificate), IEC/EN 60950-1 (CB-report) ANSI/AAMI ES60601-1 2xMOPP recognition (UL certificate), IEC/EN 60601-1 3rd Edition (CB-report) Safety Standards Safety Approvals EMC Specifications Parameter Standards & Level Conduction and Radiation EN55011, EN55022, EN61000-6-4, EN61000-6-3, FCC part 15 EN60601-1-2, EN55024, EN61000-6-2, EN61000-6-1 ESD EN61000-4-2 Air ± 8kV , Contact ± 4kV Radiated immunity EN61000-4-3 10V/m Fast transient EN61000-4-4 ±2kV Surge EN61000-4-5 ±1kV EN61000-4-6 10Vrms Conducted immunity EN61000-4-8 30A/m PFMF EN61000-4-11 30% 10ms Dips EN61000-4-11 >95% 5000ms Interruptions EMI EMS Performance Class B A A A A A A A B Environmental Specifications Parameter Operating Ambient Temperature Range (See Power Derating Curve) Storage Temperature Range Power Derating Conditions / Model Min. Max. Unit Natural Convection -40 +80 ℃ Above +65℃ Over Temperature Protection Humidity (non condensing) Cooling Lead Temperature (1.5mm from case for 10Sec.) --- E-mail:[email protected] 2015/12/25 REV:2 -40 +95 5V Output Models --0.75 Other Models --1.2 Shutdown at 90℃ (automatic recovery at approx. 67℃) --95 Natural Convection Tel:886-6-2923150 Page 2 of 5 260 ℃ W/℃ W/℃ % rel. H ℃ AJM-24 SERIES AC/DC Power Module 24W, Industrial & Medical Safety Notes 1 This product is not designed for use in critical life support systems, equipment used in hazardous environment, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. Specifications typical at Ta=+25℃, resistive load, 115VAC, 60Hz input voltage, after warm-up time rated output current unless otherwise noted. Safety approvals cover frequency 47-63 Hz. We recommend to protect the converter by a slow blow fuse in the input supply line. Other input and output voltage may be available, please contact factory. That “natural convection” is about 20LFM but is not equal to still air (0 LFM). Specifications are subject to change without notice. 2 3 4 5 6 7 Package Specifications PCB Mounting Mechanical Dimensions Pin Connections 6.0 [0.24] 7 11.43 [0.45] 6 5 0.7 [0.03] 8.89 [0.35] 11.43 [0.45] 4 3 1.0 [ 0.04] 8.89 [0.35] 62.0 [2.44] 6.3 [0.25] 41.4 [1.63] 74.0 [2.91] Mounting M4.0 Thread 6.3 [0.25] 19.5 [0.77] Pin Single Output Dual Output 1 AC (N) AC (N) 2 AC (L) AC (L) 3 No Pin No Pin 4 -Vout -Vout 5 No Pin Common 6 +Vout +Vout 7 No Pin No Pin 2 5.0 [0.20] 46.0 [1.81] Bottom View 1 ►All dimensions in mm ►Tolerance: ±0.5 20.32 [0.80] ►Pin 54.0 [2.13] Physical Characteristics Case Size : 74.0x54.0x19.5mm (2.91x2.13x0.77 inches) Case Material : Plastic resin (flammability to UL 94V-0 rated) Pin Material : Copper Alloy with Gold Plate Over Nickel Subplate Weight : 137g E-mail:[email protected] 2015/12/25 REV:2 Tel:886-6-2923150 Page 3 of 5 (inches) (±0.02) diameter 1.0 ±0.1 (0.04±0.004) AJM-24 SERIES AC/DC Power Module 24W, Industrial & Medical Safety Package Specifications Chassis Mounting (order code suffix C) Mechanical Dimensions Connections Indication LED 46.0 [1.81] 7 6 5 4 3 2 Top view 1 54.0 [2.13] 4 x 3.5 DCON POWER"GOOD"INDICATOR 86.0 [3.39] Pin Single Output Dual Output 1 AC (N) AC (N) 2 AC (L) AC (L) 3 NC NC 4 -Vout -Vout 5 NC Common 6 +Vout +Vout 7 NC NC 96.0 [3.78] NC: No Connection 10.0 [0.39] 5.0 [0.20] Physical Characteristics Case Size : 96.0x54.0x23.3mm (3.78x2.13x0.92 inches) Case Material : Plastic resin (flammability to UL 94V-0 rated) Weight : 147g Package Specifications with DIN Rail Mounting Bracket Mechanical Dimensions Indication LED Top view 46.0 [1.81] 7 6 5 4 3 2 1 54.0 [2.13] 4 x 3.5 DCON POWER"GOOD"INDICATOR 86.0 [3.39] 96.0 [3.78] 3.0 [0.12] Physical Characteristics Case Size : 96.0x54.0x23.3mm (3.78x2.13x0.92 inches) Case Material : Plastic resin (flammability to UL 94V-0 rated) Weight : 201g E-mail:[email protected] 2015/12/25 REV:2 Tel:886-6-2923150 Page 4 of 5 23.3 [0.92] 11.0 [0.43] 5.0 [0.20] 10.0 [0.39] 16.8 [0.66] 76.0 [2.99] 16.8 [0.66] 23.3 [0.92] 76.0 [2.99] ►All dimensions in mm ►Tolerance: ±0.5 (inches) (±0.02) AJM-24 SERIES AC/DC Power Module 24W, Industrial & Medical Safety DIN-Rail Mounting Bracket (Order code for Kit : AC-DIN-01) Order Code Table PCB Mounting AJM-24S05 Chassis Mounting AJM-24S05C AJM-24S05C With DIN Rail Mounting by two Order Code AC-DIN-01 AJM-24S09 AJM-24S09C AJM-24S09C AC-DIN-01 AJM-24S12 AJM-24S12C AJM-24S12C AC-DIN-01 AJM-24S15 AJM-24S15C AJM-24S15C AC-DIN-01 AJM-24S24 AJM-24S24C AJM-24S24C AC-DIN-01 AJM-24D12 AJM-24D12C AJM-24D12C AC-DIN-01 AJM-24D15 AJM-24D15C AJM-24D15C AC-DIN-01 Minmax Technology Co., Ltd. 18, Sin Sin Road, An-Ping Industrial District, Tainan 702, Taiwan Tel: 886-6-2923150 Fax: 886-6-2923149 E-mail: [email protected] 2015/12/25 REV:2 Page 5 of 55