AKF-15 SERIES AC/DC Power Module 15W FEATURES ►Fully Encapsulated Plastic Case for PCB, Chassis and DIN-Rail Mounting Version ►Universal Input 85~264VAC, 47~440Hz ►Single, Dual and Triple Outputs ►Protection Class II as per IEC/EN 60536 ►I/O Isolation 3000VAC with Reinforced Insulation ►Operating Ambient Temp. Range -25℃ to +70℃ ►Overload/Voltage/Temp. and Short Circuit Protection ►Designed-in EMI Emission meets EN55011/22 Class B & FCC Level B ►Designed-in EMC Immunity meets EN61000-4-2,3,4,5,6,8,11 ►UL508 Safety Approval (Option) Specifically for Industrial Application ►UL/cUL/IEC/EN 60950-1 Safety Approval & CE Marking PRODUCT OVERVIEW The MINMAX AKF-15 series is a new range of fully encapsulated AC/DC power supply modules.The product features EMI-filter to EN55022, class B and EMS compliance to EN 61000-4 standard. Universal input voltage 85-264VAC and International safety approvals qualifies these power modules for applications in products with worldwide markets. For industrial applications, the models for chassis mounting can also be supplied as option with UL508 approval.The AKF-15 series provide a cost effective solution for many space critical applications in commercial and industrial electronic equipment. Model Selection Guide Model Number PCB Mounting Output Voltage AKF-15S05 VDC 5 Max. mA 3000 AKF-15S12 12 1250 275 AKF-15S15 15 1000 AKF-15S24 24 625 AKF-15S48 48 AKF-15D12 AKF-15D15 AKF-15D512 AKF-15T512 AKF-15T515 Output Current Input Current Max. capacitive Load μF 3900 Efficiency (typ.) @Max. Load % 75 30 2200 79 275 30 2200 79 275 30 1000 79 310 273 30 680 79 ±12 ±650 275 30 #1500 79 ±15 ±500 275 30 #1500 79 302 30 290 30 284 30 115VAC, 60Hz @Max. Load @No Load mA(typ.) mA(typ.) 290 30 5 1500 *12 625 5 2000 *12 200 *-12 -200 *5 2000 *15 150 *-15 -150 * Output voltage accuracy 4% max. 2000 1500 2200 1500 1500 2200 1500 1500 # For each output 72 74 74 Input Specifications Parameter Input Voltage Range Input Frequency Range Input Voltage Range Conditions / Model All Models 115VAC 230VAC Inrush Current E-mail:[email protected] 2015/07/31 REV:21 Tel:886-6-2923150 Page 1 of 5 Cold Start at 25℃ Min. 85 47 120 ----- Typ. ----------- Max. 264 440 370 15 30 Unit VAC Hz VDC A A AKF-15 SERIES AC/DC POWER MODULE 15W Output Specifications Conditions Parameter Output Voltage Accuracy Line Regulation Vin=Min. to Max. @Full Load Single Output Models Io=10% to 100% Dual/ Triple Output Models Load Regulation Cross RegulationDual Positives / Triple Output Min. --------------------------- Vo1 Vo2 Vo3 Measured output Io = 20% to 100% of rated load Other output(s) set at 50% of rated load 5VDC Output Models Other Output Models 0-20 MHz Bandwidth Ripple & Noise Minimum Load Over Voltage Protection Temperature Coefficient Overshoot Zener diode clamp Typ. ±1.0 ±0.5 ±0.5 ±2.5 ±1.0 ±2.5 ±2.5 1.5 0.8 10 120 ±0.01 --- Max. ±2.0 ±1.0 ±1.0 ±5.0 ------1.8 1.0 ----±0.02 5 Unit % % % % % % % %VPP of Vo %VPP of Vo %Inom. % of Vo %/℃ % Vout --- --- %Inom. Foldback, auto-recovery 105 (long term overload condition may cause damage) Hiccup mode, Automatic Recovery Current Limitation Short Circuit Protection General Specifications Conditions Input to Output, 60 Seconds 500 VDC Typ. ----100 20 MIL-HDBK-217F@25℃, Ground Benign 280,000 According IEC/EN 60536 cUL/UL 60950-1,IEC/EN 60950-1 (UL508 for models with order code suffix ICE only) Parameter I/O Isolation Voltage I/O Isolation Resistance Switching Frequency Hold-up Time MTBF (calculated) Protection Class II Safety Approvals Min. 3000 100 ----- Max. --------- Unit VACrms MΩ KHz ms Hours EMC Specifications Parameter Standards & Level Performance EMI Conduction and Radiation EN55011, EN55022, FCC part 15 Class B EMS EN55011 ,EN55024 ESD Radiated immunity Fast transient Surge Conducted immunity PFMF Dips Interruptions EN61000-4-2 air ± 8kV , Contact ± 4kV EN61000-4-3 10V/m EN61000-4-4 ±2kV EN61000-4-5 ±1kV EN61000-4-6 10Vrms EN61000-4-8 30A/m EN61000-4-11 30% 10ms EN61000-4-11 >95% 5000ms B A B B B A B C Environmental Specifications Conditions Min. Max. Unit Natural Convection -25 +70 ℃ Parameter Operating Ambient Temperature Range (See Power Derating Curve) Storage Temperature Range -40 +50℃ to +70℃ Power Derating Over Temperature Protection ℃ W/℃ at 90℃ (automatic recovery at 67℃) Humidity (non condensing) --- Cooling 95 % rel. H 260 ℃ Natural Convection Lead Temperature (1.5mm from case for 10Sec.) E-mail:[email protected] 2015/07/31 REV:21 +85 0.563 --- Tel:886-6-2923150 Page 2 of 5 AKF-15 SERIES AC/DC POWER MODULE 15W Notes 1 2 3 All Specifications typical at Ta=+25℃, resistive load, 115VAC, 60Hz input voltage and after warm-up time rated output current unless otherwise noted. We recommend to protect the converter by a slow blow fuse in the input supply line. These power modules require a minimum output loading to maintain specified regulation, operation under no-load conditions will not damage the power supplies however they may not meet all listed specifications. Other input and output voltage may be available, please contact factory. Specifications are subject to change without notice 4 5 Package Specifications PCB Mounting Mechanical Dimensions Pin Connections 6.0 [0.24] 5 6 8.89 [0.35] 11.43 [0.45] 4 0.7 [0.03] 3 [0.28] 7.1 [0.28] 2 1 AC(N) – AC Neutral 2 AC(L) – AC Line -Vout -Vout -Vout2 Common 5 No Pin Common +Vout2 +Vout2 6 +Vout +Vout -Vout1 -Vout1 +Vout1 +Vout1 No Pin 7 No Pin ►All dimensions in mm ►Tolerance: ±0.5 54.0 [2.13] ►Pin Physical Characteristics Case Size : 74.0x54.0x19.5mm (2.91x2.13x0.77 inches) Case Material : Plastic resin (flammability to UL 94V-0 rated) Pin Material : Copper Alloy with Gold Plate Over Nickel Subplate Weight : 174g 2015/07/31 REV:21 Tel:886-6-2923150 Page 3 of 5 Triple 4 20.32 [0.80] E-mail:[email protected] Dual (D512) 1 5.0 [0.20] 46.0 [1.81] Bottom View Dual (D12,D15) 3 74.0 [2.91] 39.8 [1.57] 62.0 [2.44] Mounting M4.0 Thread 7.1 Single 0.04] 7 11.43 [0.45] Pin 1.0 [ 8.89 [0.35] 19.5 [0.77] (inches) (±0.02) diameter 1.0 ±0.1 (0.04±0.004) -Vout3 AKF-15 SERIES AC/DC POWER MODULE 15W Package Specifications Chassis Mounting (order code suffix C) Mechanical Dimensions Connections 4 x 3.5 Indication LED 46.0 [1.81] 7 6 5 4 3 2 Top view 1 54.0 [2.13] Terminal Dual (D12,D15) Single 1 AC(N) – AC Neutral 2 AC(L) – AC Line 3 4 DCON POWER"GOOD"INDICATOR 86.0 [3.39] NC -Vout2 Common 5 NC Common +Vout2 +Vout2 6 +Vout +Vout -Vout1 -Vout1 +Vout1 +Vout1 NC 5.0 [0.20] 16.8 [0.66] 23.3 [0.92] 10.0 [0.39] Physical Characteristics Case Size : 96.0x54.0x23.3mm (3.78x2.13x0.92 inches) Case Material : Plastic resin (flammability to UL 94V-0 rated) Weight : 162g Package Specifications with DIN Rail Mounting Bracket (order code AC-DIN-01) Mechanical Dimensions Indication LED Top view 46.0 [1.81] 7 6 5 4 3 2 1 54.0 [2.13] 4 x 3.5 DCON POWER"GOOD"INDICATOR 86.0 [3.39] 96.0 [3.78] 3.0 [0.12] Physical Characteristics Case Size : 96.0x54.0x23.3mm (3.78x2.13x0.92 inches) Case Material : Plastic resin (flammability to UL 94V-0 rated) Weight : 216g E-mail:[email protected] 2015/07/31 REV:21 Tel:886-6-2923150 Page 4 of 5 23.3 [0.92] 11.0 [0.43] 5.0 [0.20] 10.0 [0.39] 16.8 [0.66] 76.0 [2.99] -Vout3 -Vout NC: No Connection 76.0 [2.99] Triple -Vout 7 96.0 [3.78] Dual (D512) ►All dimensions in mm ►Tolerance: X.X±0.5 (inches) (X.XX±0.02) X.XX±0.25 ( X.XXX±0.01) ►Pin pitch tolerance: ±0.25 (0.01) AKF-15 SERIES AC/DC POWER MODULE 15W, Single, Dual & Triple Output DIN-Rail Mounting Kit Order Code Table PCB Mounting Chassis Mounting AKF-15S05C PCB Mounting With UL508 AKF-15S05ICE Chassis Mounting With UL508 AKF-15S05CICE AKF-15S05 AKF-15S12 AKF-15S15 AKF-15S12C AKF-15S12ICE AKF-15S12CICE AKF-15S12C AC-DIN-01 AKF-15S12CICE AC-DIN-01 AKF-15S15C AKF-15S15ICE AKF-15S15CICE AKF-15S15C AC-DIN-01 AKF-15S15CICE AC-DIN-01 AKF-15S24 AKF-15S24C AKF-15S24ICE AKF-15S24CICE AKF-15S24C AC-DIN-01 AKF-15S24CICE AC-DIN-01 AKF-15S48 AKF-15S48C AKF-15S48ICE AKF-15S48CICE AKF-15S48C AC-DIN-01 AKF-15S48CICE AC-DIN-01 AKF-15D12 AKF-15D12C AKF-15D12ICE AKF-15D12CICE AKF-15D12C AC-DIN-01 AKF-15D12CICE AC-DIN-01 AKF-15D15 AKF-15D15C AKF-15D15ICE AKF-15D15CICE AKF-15D15C AC-DIN-01 AKF-15D15CICE AC-DIN-01 AKF-15D512 AKF-15D512C --- --- AKF-15D512C AC-DIN-01 --- --- AKF-15T512 AKF-15T512C --- --- AKF-15T512C AC-DIN-01 --- --- AKF-15T515 AKF-15T515C --- AKF-15T515C AC-DIN-01 --- --- --- With DIN Rail Mounting by two Order Code AKF-15S05C AC-DIN-01 Chassis Mounting with UL508 & DIN Rail Mounting by two Order Code AKF-15S05CICE AC-DIN-01 Minmax Technology Co., Ltd. 18, Sin Sin Road, An-Ping Industrial District, Tainan 702, Taiwan Tel: 886-6-2923150 Fax: 886-6-2923149 E-mail: [email protected] 2015/07/31 REV:21 Page 5 of 5