AZF-60 SERIES AC/DC Power Module 60W FEATURES ►Fully encapsulated Plastic Case ►3 Mounting Versions: - PCB Mounting with Solder Pins - Chassis Mounting with Screw Terminals - DIN-Rail Mounting ►Universal Input 85-264 VAC, 47- 440 Hz ►Protection Class ll ►Safety Approval to cUL/UL/IEC/EN 60950-1 ►UL508 Approval (Option) ►Over Load and Over Voltage Protection ►3 Year Product Warranty PRODUCT OVERVIEW The MINMAX AZF-60 series is a new range of fully encapsulated AC/DC power supply modules. The product features EMI-filter to EN55022, class B and EMS compliance to EN 61000-4 standard.Universal input voltage 85-264VAC and International safety approvals qualifies these power modules for applications in products with worldwide markets. For industrial applications, the models for chassis mounting can also be supplied as option with UL508 approval.The AZF-60 series provide a cost effective solution for many space critical applications in commercial and industrial electronic equipment. Model Selection Guide Model Number PCB Mounting Output (For model with Chassis Voltage Output Current Input Current Max. capacitive Efficiency Load VDC Max. mA 115VAC, 60Hz @Max. Load @No Load mA(typ.) mA(typ.) μF (typ.) @Max. Load % AZF-60S051 5.1 10,000 936 50 8000 79 AZF-60S12 12 5000 1060 50 3900 82 AZF-60S15 15 4000 1047 50 3300 83 AZF-60S24 24 2500 1035 50 1500 84 AZF-60S36 36 1666 1035 50 1000 84 AZF-60S48 48 1250 1035 50 680 84 Mounting, add suffix C) Input Specifications Parameter Model Input Voltage Range All Models Input Frequency Range E-mail:[email protected] 2013/11/19 REV:12 Max. Unit --- 264 VAC 47 --- 63 Hz --- 370 VDC 115VAC --- --- 30 A 230VAC --- --- 50 A Tel:886-6-2923150 Page 1 of 4 Typ. 85 120 Input Voltage Range Inrush Current (Cold Start at 25℃) Min. AZF-60 SERIES AC/DC POWER MODULE 60W Output Specifications Parameter Output Voltage Accuracy Line Regulation Load Regulation Conditions Vin=Min. to Max. Iout=Min. to Max. 5.1VDC Output Models 0-20 MHz Bandwidth Other Output Models Ripple & Noise Minimum Load Over Voltage Protection Transient Response Deviation Temperature Coefficient Overshoot Zener diode clamp (Iout=100% to Iout=50%) Min. ------------------- Foldback, auto-recovery 105 (long term overload condition may cause damage) Hiccup mode, indefinite (automatic recovery) Current Limitation Short Circuit Protection Typ. ±1.0 ±0.2 ±0.5 2.0 1.0 10 120 ±3 ±0.02 --- Max. ±2.0 ±1.0 ±1.0 3.0 1.3 ----±6 --5 Unit % % % %VPP of Vo %VPP of Vo %Inom. % of Vo % %/℃ % Vout --- --- %Inom. General Specifications Parameter I/O Isolation Voltage I/O Isolation Resistance Switching Frequency Hold-up Time MTBF (calculated) EMC Emission Conditions Input to Output, 60 Seconds 500 VDC MIL-HDBK-217F@25℃, Ground Benign Conducted and radiated Standard EN61000-4-2 EN61000-4-3 EN61000-4-4 EN61000-4-5 EMC Immunity according EN61000-6-1 EN61000-4-6 EN61000-4-8 EN61000-4-11 Protection Class II Safety Approvals Min. 3000 100 ----- Typ. Max. Unit ----VACrms ----MΩ 100 --KHz 20 --ms 125,000 Hours EN 55011 class B, EN 55022 class B, FCC part 15 class B Specification Requirement Performance Criteria Air ±8KV Cont. ±4KV B 80~1000MHz, 10V/m 80% AM, 1KHz modulation A AC port ±2KV DC, SL, TL ±2KV not less than 1 min. B 1.2/50μS(8/20μS) AC dif. ±1KV DC ±0.5KV B 0.15~80MHz, 10Vrms (functional earth ports included) B 80% AM, 1KHz modulation 50Hz/60Hz, 30A/m A 30%, 10ms B 60%, 100ms, 95%, 5000ms C According IEC/EN 60536 cUL/UL 60950-1,IEC/EN 60950-1 (UL508 for models with order code suffix ICE only) Environmental Specifications Parameter Temperature Range (operational) Power Derating Power Derating (5.1Vout) Storage Temperature Range Over Temperature Protection Cooling Humidity (non condensing) Conditions -10℃ Ambient +50℃ to +70℃ +40℃ to +70℃ -40℃ at 90℃ (automatic recovery at 67℃) Free-Air convection --- +70℃ 2.25W / ℃ 2.25W / ℃ +85℃ 95 % rel. H Notes 1 3 All specifications typical at Ta=+25℃, resistive load, 115VAC, 60Hz input voltage and after warm-up time rated output current unless otherwise noted. These power modules require a minimum output loading to maintain specified regulation, operation under no-load conditions will not damage the power supplies however they may not meet all listed specifications. Other input and output voltage may be available, please contact factory. 4 Long term short circuit operation may cause damage to the unit. 5 To order the module with chassis mount package, please add a suffix C (e.g. AZF-60S12C). 2 6 To order the module with UL508 safety, please add a suffix ICE (e.g. AZF-60S12ICE). 7 Part number for DIN-Rail mounting bracket: AC-DIN-02 8 That “natural convection” is about 20LFM but is not equal to still air (0 LFM). 9 Specifications are subject to change without notice E-mail:[email protected] 2013/11/19 REV:12 Tel:886-6-2923150 Page 2 of 4 AZF-60 SERIES AC/DC POWER MODULE 60W Package Specifications PCB Mounting Mechanical Dimensions Pin Connections 25.4 [1.00] 4 1.0 [ 0.04] 6 81.3 [3.20] 27.5 [1.08] 31.45 [1.24] Mounting M4.0 Thread Bottom View 2 Function 1 AC(N) – AC Neutral 2 AC(L) – AC Line 4 +Vout 6 -Vout 88.9 [3.50] 28.75 [1.13] Pin 1 ►All 55.88 [2.20] 0.7 [0.03] 6.0 [0.24] 67.5 [2.66] dimensions in mm (inches) ►Tolerance: ±1.0 34.2 [1.35] ►Pin (±0.04) diameter 1.0 ±0.1 (0.04±0.004) Physical Characteristics Case Size : Case Material : 88.9x67.5x34.2mm (3.50x2.66x1.35 inches) Plastic resin + Fiberglass (flammability to UL 94V-0 rated) Pin Material : Copper Alloy with Gold Plate Over Nickel Subplate Weight : 345g Package Specifications Chassis Mounting (order code suffix C) Mechanical Dimensions Connections 4x 3.5 Terminal Function 1 AC(N) – AC Neutral 2 AC(L) – AC Line 5 Top View 4 Indication LED 1 67.8 [2.67] 2 50.0 [1.97] 7 6 3 DCON POWER"GOOD"INDICATOR 3 NC 4 +Vout 5 NC 6 -Vout 7 NC 100.0 [3.94] NC: No Connection 112.0 [4.41] Physical Characteristics Case Size : 112.0x67.8x38.0mm (4.41x2.67x1.50 inches) Case Material Weight : : Plastic resin + Fiberglass (flammability to UL 94V-0 rated) 357g E-mail:[email protected] 2013/11/19 REV:12 Tel:886-6-2923150 Page 3 of 4 38.0 [1.50] 5.0[0.20] 11.0 [0.43] 16.8 [0.66] 90.0 [3.54] ►All dimensions in mm (inches) ►Tolerance: ±1.0 (±0.04) AZF-60 SERIES AC/DC POWER MODULE 60W Package Specifications with DIN Rail Mounting Bracket Mechanical Dimensions 4x 3.5 Top View 1 67.8 [2.67] 2 5 4 Indication LED 50.0 [1.97] 7 6 3 DCON POWER"GOOD"INDICATOR 100.0 [3.94] 112.0 [4.41] 38.0 [1.50] 11.0 [0.43] 3.0 [0.12] 5.0[0.20] 11.0 [0.43] 16.8 [0.66] 90.0 [3.54] Physical Characteristics Case Size : Case Material : 112.0x67.8x38.0mm (4.41x2.67x1.50 inches) Plastic resin + Fiberglass (flammability to UL 94V-0 rated) Weight : 410g DIN-Rail Mounting Bracket (Order Code for Kit : AC-DIN-02) 18, Sin Sin Road, An-Ping Industrial District, Tainan 702, Taiwan Tel: 886-6-2923150 Fax: 886-6-2923149 E-mail: [email protected] Minmax Technology Co., Ltd. 2013/11/19 REV:12 Page 4 of 4