SL12A thru SL110A Surface Mount Schottky Barrier Rectifier FEATURES • Ideal for automated placement • Low forward voltage drop • Low leakage current • Meets environmental standard MIL-S-19500D DO‐214AC(SMA) • Moisture sensitivity:level 1, per J-STD-020 • Solder dip 275 °C, 10 s • Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC TYPICAL APPLICATIONS For use in general purpose rectification of lighting, power supplies, inverters, converters and freewheeling diodes for consumer, automotive and telecommunication. PRIMARY CHARACTERISTICS IF(AV) 1A VRRM 20 V to 100 V IFSM 30A VF 0.42V,0.5V,0.68V TJ max. 125 °C ,150°C MECHANICAL DATA Case: DO-214AC, molded epoxy body,Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22B-106 Polarity: Laser Band Denotes Cathode Band MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) SYMBO L SL12A SL13A SL14A SL15A SL16A SL17A SL18A SL19A SL110 A UNIT Maximum repetitive peak reverse voltage VRRM 20 30 40 50 60 70 80 90 100 V Maximum RMS voltage VRMS 14 21 28 35 42 49 56 63 70 V Maximum DC blocking voltage VDC 20 30 40 50 60 70 80 90 100 V Maximum average forward rectified current at TL IF(AV) 1 A IFSM 30 A PARAMETER (See Fig.1) Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load Operating junction temperature range Storage temperature range TJ - 55 to + 125 Tstg www.goodark.com 1 / 3 - 55 to + 150 - 55 to + 150 rev.1 °C °C SL12A thru SL110A ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) TEST CONDITIONS PARAMETER Maximum instantaneous forward voltage Maximum DC reverse current at rated DC blocking voltage Typical junction capacitance IF=1 A SYMBOL SL12A VF SL13A SL14A SL15A 0.42 SL16A SL17A SL18A 0.5 TA=25℃ SL19A SL110 A 0.68 UNIT V 0.2 TA=100℃ IR 4.0 V, 1 MHz CJ mA 10 85 pF THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL Maximum thermal resistance SL12A SL13A SL14A SL15A SL16A RθJA (1) TBD RθJT (2) TBD SL17A SL18A SL19A SL110A °C/W Notes: (1) Thermal resistance from junction to ambient,0.197×0.197 (5.0×5.0mm)copper pads to each terminal 〃 〃 (2) Thermal resistance from junction to terminal, 0.197×0.197 (5.0×5.0mm)copper pads to each terminal RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) Figure 1. Forward Current Derating Curve Figure 3. Typical Instantaneous Forward Characteristics www.goodark.com 2 / 3 UNIT Figure 2.Maximum Non‐repetitive Peak Forward Surge Current Figure 4. Typical Reverse Characteristics rev.1 SL12A thru SL110A Figure 5. Typical Junction Capacitance PACKAGE OUTLINE DIMENSIONS in inches (millimeters) www.goodark.com 3 / 3 rev.1