PSMTC SERIES 15 Watt Medical AC/DC Switching Power Supplies Rev E Wall Industries, Inc. FEATURES • RoHS Compliant • PCB Mountable Switching Power Supply • Isolation Class II • -25°C to +70°C Operating Temperature Range • 15 Watts Output Power • Optional -40°C to +70°C Operating Temperature Range • Low Ripple and Noise • Free Air Convection Cooling • Single, Dual, and Triple Outputs • Protection: SCP / OCP / OVP / OTP • Fully Encapsulated Plastic Case • Universal Input Voltage Range: 90~264VAC (120~375VDC) • 4000VAC I/O Isolation • UL/cUL60601-1, IEC60601-1, EC60601-1 Medical Approvals DESCRIPTION E308218 Size: 2.52 x 1.79 x 0.92 inches 64.0 x 45.6 x 23.5 mm Weight: 4.23oz (120g) The PSMTC series of medical AC/DC switching power supplies provides 15 watts of output power in a 2.52” x 1.79” x 0.92” encapsulated PCB mountable package. This series consists of single, dual, and triple output models with a universal input range of 90~264VAC (120~375VDC). Some features include low ripple and noise, -25°C to +70°C operating temperature range, and short circuit, over current, over voltage, and over temperature protection. The PSMTC series also offers an extended operating temperature range of -40°C to +70°C (“-E1” suffix). All models are RoHS compliant and have UL/cUL60601-1, IEC60601-1, and EC60601-1 medical approvals. MODEL SELECTION TABLE SINGLE OUTPUT MODELS Model Number Input Voltage PSMTC-3.3S PSMTC-5S PSMTC-7.35S 90~264 VAC (120~375 VDC) PSMTC-9S PSMTC-12S Output Voltage Output Current Min Load Max Load Voltage Accuracy Line Regulation Load Regulation (0% - 100%) Output Power Efficiency Maximum Capacitive Load 3.3 VDC 0% 3000mA ±2% 0.5% 1% 9.9W 75% 40,000μF 5 VDC 0% 3000mA ±2% 0.5% 1% 15W 79% 10,000μF 7.35 VDC 0% 2040mA ±2% 0.5% 1% 15W 79% 4700µF 9 VDC 0% 1666mA ±2% 0.5% 1% 15W 80% 3000µF 12 VDC 0% 1250mA ±2% 0.5% 1% 15W 81% 1100μF PSMTC-15S 15 VDC 0% 1000mA ±2% 0.5% 1% 15W 82% 1000μF PSMTC-24S 24 VDC 0% 625mA ±2% 0.5% 1% 15W 83% 820μF Output Power Efficiency Maximum Capacitive Load 15W 79% 15W 82% 15W 82% Output Power Efficiency 15W 78% DUAL OUTPUT MODELS Model Number PSMTC-5D PSMTC-12D PSMTC-15D Output Voltage Vo1 +5 VDC Vo2 -5 VDC Vo1 +12 VDC Vo2 -12 VDC Vo1 +15 VDC Vo2 -15 VDC Output Current Min Load(1) Max Load 1500mA 10% 1500mA 10% 10% Voltage Accuracy Line Regulation Load Regulation (10% - 100%) Cross Regulation ±2% 0.5% 1% (sym. load) 5% ±2% 0.5% 1% (sym. load) 5% 625mA ±2% 0.5% 1% (sym. load) 3% 625mA ±2% 0.5% 1% (sym. load) 3% 500mA ±2% 0.5% 1% (sym. load) 3% 500mA ±2% 0.5% 1% (sym. load) 3% 4700µF 4700µF 560µF 560µF 500µF 500µF TRIPLE OUTPUT MODELS Model Number PSMTC-5S12D PSMTC-5S15D Output Voltage Output Current Min Load(1) Max Load Voltage Accuracy Line Regulation Load Regulation (10% - 100%) Cross Regulation 2000mA ±2% 0.5% 1% 1% 200mA ±3% 2% 5% (sym. load) 5% Maximum Capacitive Load Vo1 5 VDC Vo2 +12 VDC Vo3 -12 VDC 200mA ±3% 2% 5% (sym. load) 5% 470μF Vo1 5 VDC 2000mA ±2% 0.5% 1% 1% 1000μF Vo2 +15 VDC 150mA ±3% 2% 5% (sym. load) 5% Vo3 -15 VDC 150mA ±3% 2% 5% (sym. load) 5% 25% 25% 1000μF 15W 78% 470μF 600μF 600μF NOTES 1. Some models require a minimum loading on the output to maintain specified regulations. Operation under no-load conditions will not damage these devices; however, they may not meet all listed specifications. 2. For -40°C to +71°C extended operating temperature range please add the suffix –E1 to the model number (Ex: PSMTC-12S-E1). 10/24/2013 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 1 of 4 Rev E Wall Industries, Inc. PSMTC SERIES 15 Watt Medical AC/DC Switching Power Supplies TECHNICAL SPECIFICATIONS: PSMTC SERIES All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS Min Typ Max Unit INPUT SPECIFICATIONS AC input voltage range DC input voltage range Input Voltage 90 120 47 Input Frequency At 115VAC and full load At 230VAC and full load Input Current At 115VAC At 230VAC At 115VAC At 230VAC Standard Models Inrush Current (<2ms) -E1 Suffix Models External Fuse (recommended) OUTPUT SPECIFICATIONS Output Voltage Voltage Accuracy Line Regulation Load Regulation Cross Regulation Output Power Output Current Minimum Load Ripple & Noise Max Capacitive Load Hold-Up Time Temperature Coefficient PROTECTION Short Circuit Protection Over Voltage Protection Over Current Protection Over Temperature Protection GENERAL SPECIFICATIONS Efficiency Switching Frequency Isolation Voltage (Input to Output) Earth Ground Leakage Current Enclosure Leakage Current 264 375 440 220 118 10 20 23 46 2.0A slow blow type See Table See Table See Table See Table See Table 15 See Table See Table 1 See Table Low Line to High Line Measured at 20MHz BW with 0.1µF and 47µF capacitors in parallel 20 VAC VDC Hz mA A A W %Vo ms %/°C ±0.01 Hiccup mode, indefinite (auto-recovery) Zener diode clamp Above 105% rated output power 100 °C See Table 132 4000 At 115VAC and full load At 230VAC and full load At 240VAC, 63Hz, and full load At 264VAC, 63Hz, and full load 0.1 0.2 0.055 0.06 KHz VAC mA mA ENVIRONMENTAL SPECIFICATIONS Operating Temperature Case Temperature Storage Temperature Humidity Cooling MTBF PHYSICAL SPECIFICATIONS Weight Case Material Dimensions (L x W x H) SAFETY & EMC Class II EMI EMC Standards ESD Susceptibility Radiated Susceptibility EFT / Burst Surge Conducted Susceptibility Safety Approvals Approvals 10/24/2013 Standard Models -E1 Suffix Models -25 -40 -40 +70 +70 +95 +85 95 Free air convection 400,000 °C °C °C % RH At 25°C 200,000 hours Flammability to UL 94V-0 4.23oz (120g) Plastic resin + fiberglass 2.52 x 1.79 x 0.92 inch (64.0 x 45.6 x 23.5 mm) To IEC / EN 60536 EN55011 Class B EN60601-1-2 EN60601-1-2 EN60601-1-2 EN60601-1-2 EN60601-1-2 EN60601-1-2 UL/cUL60601-1, IEC60601-1, EC60601-1, CB ANSI/AAMI ES 60601-1: 2005, 1st Edition and CAN/CSA-C22.2 No. 60601-1:08, 2nd Edition, MOPP Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 2 of 4 PSMTC SERIES 15 Watt Medical AC/DC Switching Power Supplies Rev E Wall Industries, Inc. BLOCK DIAGRAMS Single Output Dual Output +V O.V.P. N O.C.P. -V DETECT CONTROL OSCILLATION CONTROL OSCILLATION RECTIFIER INPUT COM OUTPUT INPUT O.V.P. RECTIFIER RECTIFIER OUTPUT O.V.P. RECTIFIER -V N LINE FILTER L SWITCHING +V SWITCHING RECTIFIER LINE FILTER L O.C.P. DETECT Triple Output +5V O.V.P. RECTIFIER G O.V.P. N OUTPUT +V RECTIFIER INPUT SWITCHING RECTIFIER LINE FILTER L COM O.V.P. RECTIFIER -V CONTROL OSCILLATION O.C.P. DETECT DERATING CURVES “-E1” Suffix Models 120 120 100 100 90 80 Output Power (%) Output Power (%) Standard Models 80 60 50 40 20 Triple Output Models 60 40 25% 20 0 -25 -20 0 20 40 50 -25 0 60 Ambient Temperature (°C) 10/24/2013 Others 70 80 100 -40 -20 0 20 40 50 60 70 80 100 Ambient Temperature (°C) Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 3 of 4 PSMTC SERIES 15 Watt Medical AC/DC Switching Power Supplies Rev E Wall Industries, Inc. MECHANICAL DRAWING Unit: inches (mm) 2.52 (64.0) 0.92 (23.5) 0.24 (6.0) PIN CONNECTIONS 2.13 (54.0) 0.69 (17.5) 0.39 0.39 (10.0) (10.0) 0.29 (7.5) 4 0.49 (12.5) 0.69 (17.5) TOP VIEW 2 0.69 (17.5) 1.79 (45.6) 1 0.04 (1.0) 5 6 7 8 9 3 0.16 (4.0) PIN 1 2 3 4 5 6 7 8 9 SINGLE NO PIN AC IN (L) AC IN (N) -DC OUT NO PIN NO PIN +DC OUT NO PIN NO PIN DUAL NO PIN AC IN (L) AC IN (N) -DC OUT COMMON NO PIN +DC OUT NO PIN NO PIN TRIPLE NO PIN AC IN (L) AC IN (N) +5V RTN +5V OUT -DC OUT NO PIN COMMON +DC OUT Tolerance: ±0.02” (±0.5mm) 0.24 (6.0) COMPANY INFORMATION Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008 certification is just one example of our commitment to producing a high quality, well-documented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone: Toll Free: Fax: E-mail: Web: Address: 10/24/2013 (603)778-2300 (888)597-9255 (603)778-9797 [email protected] www.wallindustries.com 37 Industrial Drive Exeter, NH 03833 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 4 of 4