592D www.vishay.com Vishay Sprague Solid Tantalum Chip Capacitors TANTAMOUNT®, Low Profile, Low ESR, Conformal Coated, Maximum CV FEATURES • New robust ratings for pulsed applications • 1.0 mm to 2.5 mm height Available • Terminations: 100 % matte tin (2) standard, tin/lead available Available • Mounting: Surface mount • 8 mm, 12 mm tape and reel packaging available per EIA 481 and reeling per IEC 60286-3 7" [178 mm] standard 13" [330 mm] available • Case code compatibility with EIA 535BAAC and CECC 30801 • See also 592W for additional ratings designs for pulsed applications PERFORMANCE CHARACTERISTICS www.vishay.com/doc?40088 • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 Operating Temperature: - 55 °C to + 125 °C (above 85 °C, voltage derating is required) Capacitance Range: 1 μF to 2200 μF Capacitance Tolerance: ± 10 %, ± 20 % standard Voltage Rating: 4 VDC to 50 VDC Note * This datasheet provides information about parts that are RoHS-compliant and/or parts that are non-RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information/tables in this datasheet for details. ORDERING INFORMATION 592D 106 X0 010 B 2 T 15H TYPE CAPACITANCE CAPACITANCE TOLERANCE DC VOLTAGE RATING AT + 85 °C CASE CODE TERMINATION REEL SIZE AND PACKAGING SUFFIX This is expressed in picofarads. The first two digits are the significant figures. The third is the number of zeros to follow. X0 = ± 20 % X9 = ± 10 % This is expressed in volts. To complete the three-digit block, zeros precede the voltage rating. A decimal point is indicated by an “R” (6R3 = 6.3 V). See Ratings and Case Codes table 2 = 100 % tin 4 = Gold plated 8 = Solder plated 60/40 Special order T = Tape and reel 7" [178 mm] reel W = 13" [330 mm] reel Maximum height (mm) see Standard Ratings table Note • Preferred tolerance and reel sizes are in bold. We reserve the right to substitute form-fit-function replacement products with higher voltage rating, tighter capacitance tolerance or lower ESR (e.g., 591D series). Revision: 25-Jun-13 Document Number: 40004 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 592D www.vishay.com Vishay Sprague DIMENSIONS in inches [millimeters] Tantalum wire nib identifies anode (+) terminal W L MAX. B D REF. J MAX. J MAX. A H (1) CASE CODE L MAX. A 0.146 [3.7] B 0.157 [4.0] C 0.28 [7.1] D 0.295 [7.5] M 0.295 [7.5] R 0.283 [7.2] S 0.138 [3.5] X 0.571 [14.5] W 0.071 ± 0.012 [1.8 ± 0.3] 0.110 + 0.012/- 0.016 [2.8 + 0.3/- 0.4] 0.126 ± 0.012 [3.2 ± 0.3] 0.169 ± 0.012 [4.3 ± 0.3] 0.248 ± 0.012 [6.3 ± 0.3] 0.236 + 0.012/- 0.024 [6.0 + 0.3/- 0.6] 0.063 ± 0.012 [1.6 ± 0.3] 0.290 + 0.010/- 0.020 [7.37 + 0.25/- 0.5] A 0.031 ± 0.012 [0.8 ± 0.3] 0.031 ± 0.012 [0.8 ± 0.3] 0.051 ± 0.012 [1.3 ± 0.3] 0.051 ± 0.012 [1.3 ± 0.3] 0.051 ± 0.012 [1.3 ± 0.3] 0.051 ± 0.012 [1.3 ± 0.3] 0.031 ± 0.012 [0.8 ± 0.3] 0.051 ± 0.016 [1.3 ± 0.4] B 0.087 ± 0.016 [2.2 ± 0.4] 0.098 ± 0.016 [2.5 ± 0.4] 0.173 ± 0.024 [4.4 ± 0.6] 0.181 ± 0.024 [4.6 ± 0.6] 0.200 ± 0.024 [5.1 ± 0.6] 0.181 ± 0.024 [4.6 ± 0.6] 0.079 ± 0.012 [2.0 ± 0.3] 0.469 ± 0.024 [11.9 ± 0.6] D REF. J MAX. 0.114 [2.9] 0.004 [0.1] 0.138 [3.5] 0.004 [0.1] 0.236 [6.0] 0.004 [0.1] 0.252 [6.4] 0.004 [0.1] 0.264 [6.7] 0.004 [0.1] 0.244 [6.2] 0.004 [0.1] 0.087 [2.2] 0.004 [0.1] 0.52 [13.2] 0.004 [0.1] 35 V A/B B B/C C/D B/C/D/R D/R R 50 V B Notes • The anode termination (D less B) will be a minimum of 0.012" [0.3 mm] (1) For package height, please refer to specific rating in the “Standard Ratings” table RATINGS AND CASE CODES μF 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 120 150 220 330 470 680 1000 1500 2200 4V A/B B C B/C/D A/B/C/D/R B/C/D/R C/D/R C/D C/D/R D/R R X X Revision: 25-Jun-13 6.3 V A A/B A/B A/B/C/S A/B/C/D B/C/D/R B/C/D/R C C/D/R C/D/R C/D/R C/D/R R R/X M/R/X X 10 V 16 V A A A/B B A/B/C C/D B/D/R B/C/D/R B/C/D/R A A/B B/C B/C/D B/C/D B/C/D/R B/C/R C/D C/D C/D D/R D/R D/R R 20 V 25 V A A/B B/C C C/D B/D/R R A/B B/C B/C/D C/D/R B/D/R R C C C/R R R C R R X Document Number: 40004 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 592D www.vishay.com Vishay Sprague STANDARD RATINGS CAPACITANCE CASE (μF) CODE 22 22 33 47 68 68 68 100 100 100 100 100 150 150 150 150 220 220 220 330 330 470 470 470 470 470 680 680 1000 1500 2200 2200 A B B C B C D A B C D R B C D R C D R C D C D D D R D R R X X X 10 15 15 22 22 22 22 33 33 33 33 47 47 47 47 A A B A A A B A B C S A A B B PART NUMBER HEIGHT MAX. (mm) MAX. DCL AT + 25 °C (μA) 4 VDC AT + 85 °C; 2.7 VDC AT + 125 °C 592D226(1)004A(2)(3)15H 1.5 0.9 592D226(1)004B(2)(3)15H 1.5 0.9 592D336(1)004B(2)(3)15H 1.5 1.3 592D476(1)004C(2)(3)15H 1.5 1.9 592D686(1)004B(2)(3)15H 1.5 2.7 592D686(1)004C(2)(3)15H 1.5 2.7 592D686(1)004D(2)(3)15H 1.5 2.7 592D107(1)004A(2)(3)12H 1.2 4.0 592D107(1)004B(2)(3)20H 2.0 4.0 592D107(1)004C(2)(3)15H 1.5 4.0 592D107(1)004D(2)(3)15H 1.5 4.0 592D107(1)004R(2)(3)15H 1.5 4.0 592D157(1)004B(2)(3)20H 2.0 6.0 592D157(1)004C(2)(3)15H 1.5 6.0 592D157(1)004D(2)(3)15H 1.5 6.0 592D157(1)004R(2)(3)15H 1.5 6.0 592D227(1)004C(2)(3)20H 2.0 8.8 592D227(1)004D(2)(3)15H 1.5 8.8 592D227(1)004R(2)(3)15H 1.5 8.8 592D337(1)004C(2)(3)20H 2.0 13.2 592D337(1)004D(2)(3)20H 2.0 13.2 592D477(1)004C(2)(3)20H 2.0 18.8 592D477(1)004D(2)(3)14H 1.4 18.8 592D477(1)004D(2)(3)15H 1.5 18.8 592D477(1)004D(2)(3)20H 2.0 18.8 592D477(1)004R(2)(3)20H 2.0 18.8 592D687(1)004D(2)(3)20H 2.0 27.2 592D687(1)004R(2)(3)20H 2.0 27.2 592D108(1)004R(2)(3)20H 2.0 40.0 592D158(1)004X(2)(3)20H 2.0 60.0 592D228(1)004X(2)(3)20H 2.0 88.0 592D228(1)004X(2)(3)25H 2.5 88.0 6.3 VDC AT + 85 °C; 4 VDC AT + 125 °C 592D106(1)6R3A(2)(3)15H 1.5 0.6 592D156(1)6R3A(2)(3)15H 1.5 0.9 592D156(1)6R3B(2)(3)15H 1.5 0.9 592D226(1)6R3A(2)(3)10H 1.0 1.4 592D226(1)6R3A(2)(3)13H 1.3 1.4 592D226(1)6R3A(2)(3)15H 1.5 1.4 592D226(1)6R3B(2)(3)15H 1.5 1.4 592D336(1)6R3A(2)(3)15H 1.5 2.1 592D336(1)6R3B(2)(3)15H 1.5 2.1 592D336(1)6R3C(2)(3)15H 1.5 2.1 592D336(1)6R3S(2)(3)12H 1.2 2.1 592D476(1)6R3A(2)(3)13H 1.3 2.7 592D476(1)6R3A(2)(3)15H 1.5 2.7 592D476(1)6R3B(2)(3)12H 1.2 3.0 592D476(1)6R3B(2)(3)15H 1.5 3.0 MAX. DF AT + 25 °C 120 Hz (%) MAX. ESR AT + 25 °C 100 kHz () MAX. RIPPLE 100 kHz IRMS (A) 6 6 6 6 6 6 6 24 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 10 12 12 14 20 25 25 2.400 1.600 1.600 0.400 1.400 0.350 0.270 1.000 0.450 0.450 0.350 0.260 0.450 0.450 0.360 0.250 0.200 0.200 0.190 0.120 0.120 0.100 0.140 0.140 0.100 0.100 0.100 0.100 0.200 0.040 0.055 0.040 0.16 0.22 0.22 0.50 0.24 0.53 0.68 0.23 0.42 0.47 0.60 0.76 0.42 0.47 0.59 0.77 0.74 0.79 0.89 0.96 1.02 1.05 0.93 0.94 1.18 1.32 1.18 1.32 0.94 2.09 1.78 2.12 6 6 6 12 6 6 6 6 6 6 10 14 14 8 8 2.700 2.500 1.700 4.000 1.500 1.500 1.500 1.700 1.400 0.400 2.000 2.000 2.000 1.400 1.400 0.15 0.15 0.22 0.11 0.19 0.20 0.23 0.19 0.24 0.50 0.17 0.16 0.17 0.23 0.24 Note • Part number definitions: (1) Tolerance: For 10 % tolerance, specify “X9”; for 20 % tolerance, change to “X0” (2) Termination: For 100 % tin specify “2”, for gold plated specify “4”, for solder plated 60/40 specify “8” (3) Packaging code: For 7" reels specify “T", for 13" reels specify “W” Revision: 25-Jun-13 Document Number: 40004 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 592D www.vishay.com Vishay Sprague STANDARD RATINGS CAPACITANCE CASE (μF) CODE 47 47 68 68 68 68 68 68 68 100 100 100 100 100 120 150 150 150 220 220 220 220 220 330 330 330 330 330 330 330 330 330 470 470 470 470 470 680 680 1000 1000 1000 1500 1500 1500 1500 1500 2200 2200 2200 C D B B B C C D R B B C D R C C D R C C D D R C C D D D D R R R C C D R R R R R R X M R X X X X X X PART NUMBER HEIGHT MAX. (mm) MAX. DCL AT + 25 °C (μA) 6.3 VDC AT + 85 °C; 4 VDC AT + 125 °C 592D476(1)6R3C(2)(3)15H 1.5 3.0 592D476(1)6R3D(2)(3)15H 1.5 3.0 592D686(1)6R3B(2)(3)13H 1.3 4.3 592D686(1)6R3B(2)(3)15H 1.5 4.3 592D686(1)6R3B(2)(3)20H 2.0 4.3 592D686(1)6R3C(2)(3)14H 1.4 4.3 592D686(1)6R3C(2)(3)15H 1.5 4.3 592D686(1)6R3D(2)(3)15H 1.5 4.3 592D686(1)6R3R(2)(3)15H 1.5 4.3 592D107(1)6R3B(2)(3)15H 1.5 6.3 592D107(1)6R3B(2)(3)20H 2.0 6.3 592D107(1)6R3C(2)(3)15H 1.5 6.3 592D107(1)6R3D(2)(3)15H 1.5 6.3 592D107(1)6R3R(2)(3)15H 1.5 6.3 592D127(1)6R3C(2)(3)20H 2.0 7.2 592D157(1)6R3C(2)(3)20H 2.0 9.5 592D157(1)6R3D(2)(3)15H 1.5 9.5 592D157(1)6R3R(2)(3)15H 1.5 9.5 592D227(1)6R3C(2)(3)18H 1.8 13.9 592D227(1)6R3C(2)(3)20H 2.0 13.9 592D227(1)6R3D(2)(3)15H 1.5 13.9 592D227(1)6R3D(2)(3)20H 2.0 13.9 592D227(1)6R3R(2)(3)15H 1.5 13.9 592D337(1)6R3C(2)(3)16H 1.6 20.8 592D337(1)6R3C(2)(3)20H 2.0 20.8 592D337(1)6R3D(2)(3)15H 1.5 20.8 592D337(1)6R3D(2)(3)16H 1.6 20.8 592D337(1)6R3D(2)(3)19H 1.9 20.8 592D337(1)6R3D(2)(3)20H 2.0 20.8 592D337(1)6R3R(2)(3)12H 1.2 20.8 592D337(1)6R3R(2)(3)15H 1.5 20.8 592D337(1)6R3R(2)(3)20H 2.0 20.8 592D477(1)6R3C(2)(3)16H 1.6 29.6 592D477(1)6R3C(2)(3)20H 2.0 29.6 592D477(1)6R3D(2)(3)20H 2.0 29.6 592D477(1)6R3R(2)(3)16H 1.6 29.6 592D477(1)6R3R(2)(3)20H 2.0 29.6 592D687(1)6R3R(2)(3)16H 1.6 42.8 592D687(1)6R3R(2)(3)20H 2.0 42.8 592D108(1)6R3R(2)(3)20H 2.0 63.0 592D108(1)6R3R(2)(3)22H 2.2 63.0 592D108(1)6R3X(2)(3)20H 2.0 63.0 592D158X06R3M(2)(3)20H 2.0 95.0 592D158X06R3R(2)(3)20H 2.0 95.0 592D158(1)6R3X(2)(3)16H 1.6 95.0 592D158(1)6R3X(2)(3)20H 2.0 95.0 592D158(1)6R3X(2)(3)25H 2.5 95.0 592D228(1)6R3X(2)(3)20H 2.0 139.0 592D228(1)6R3X(2)(3)21H 2.1 139.0 592D228(1)6R3X(2)(3)22H 2.2 139.0 MAX. DF AT + 25 °C 120 Hz (%) MAX. ESR AT + 25 °C 100 kHz () MAX. RIPPLE 100 kHz IRMS (A) 6 6 8 8 6 6 6 6 6 8 8 8 8 8 8 8 8 8 8 8 8 8 8 10 12 8 12 8 8 10 8 8 14 14 10 10 10 10 10 29 29 16 50 50 25 25 20 35 35 35 0.400 0.300 0.600 0.600 0.500 0.380 0.380 0.270 0.200 1.000 0.450 0.380 0.260 0.200 0.200 0.190 0.250 0.200 0.150 0.150 0.220 0.120 0.180 0.150 0.200 0.120 0.150 0.100 0.100 0.180 0.180 0.100 0.200 0.100 0.100 0.120 0.100 0.100 0.100 0.200 0.200 0.040 0.090 0.120 0.045 0.045 0.035 0.055 0.055 0.055 0.50 0.65 0.35 0.37 0.40 0.51 0.51 0.68 0.87 0.28 0.42 0.51 0.69 0.87 0.74 0.76 0.71 0.87 0.86 0.86 0.75 1.08 0.91 0.82 0.74 1.02 0.93 1.18 1.18 0.87 0.91 1.32 0.71 1.05 1.18 1.37 1.32 1.25 1.32 0.94 0.96 2.09 1.39 1.21 1.94 1.97 2.27 1.78 1.79 1.79 Note • Part number definitions: (1) Tolerance: For 10 % tolerance, specify “X9”; for 20 % tolerance, change to “X0” (2) Termination: For 100 % tin specify “2”, for gold plated specify “4”, for solder plated 60/40 specify “8” (3) Packaging code: For 7" reels specify “T", for 13" reels specify “W” Revision: 25-Jun-13 Document Number: 40004 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 592D www.vishay.com Vishay Sprague STANDARD RATINGS CAPACITANCE CASE (μF) CODE HEIGHT MAX. (mm) PART NUMBER MAX. DCL AT + 25 °C (μA) MAX. DF AT + 25 °C 120 Hz (%) MAX. ESR AT + 25 °C 100 kHz () MAX. RIPPLE 100 kHz IRMS (A) 0.10 10 VDC AT + 85 °C; 7 VDC AT + 125 °C 4.7 A 592D475(1)010A(2)(3)15H 1.5 0.5 6 6.000 6.8 A 592D685(1)010A(2)(3)15H 1.5 0.7 6 6.000 0.10 10 A 592D106(1)010A(2)(3)15H 1.5 1.0 6 2.600 0.15 10 B 592D106(1)010B(2)(3)15H 1.5 1.0 6 1.700 0.22 15 B 592D156(1)010B(2)(3)15H 1.5 1.5 6 1.600 0.22 22 A 592D226(1)010A(2)(3)13H 1.3 2.2 6 1.500 0.19 22 B 592D226(1)010B(2)(3)13H 1.3 2.2 6 1.500 0.22 22 B 592D226(1)010B(2)(3)15H 1.5 2.2 6 1.500 0.23 22 C 592D226(1)010C(2)(3)15H 1.5 2.2 6 0.400 0.50 33 C 592D336(1)010C(2)(3)15H 1.5 3.3 6 0.400 0.50 33 D 592D336(1)010D(2)(3)15H 1.5 3.3 6 0.300 0.65 47 B 592D476(1)010B(2)(3)20H 2.0 4.7 6 0.500 0.40 47 D 592D476(1)010D(2)(3)15H 1.5 4.7 6 0.270 0.68 47 R 592D476(1)010R(2)(3)15H 1.5 4.7 6 0.200 0.87 68 B 592D686(1)010B(2)(3)20H 2.0 6.8 6 0.450 0.42 68 C 592D686(1)010C(2)(3)15H 1.5 6.8 6 0.240 0.65 68 D 592D686(1)010D(2)(3)15H 1.5 6.8 6 0.270 0.68 68 R 592D686(1)010R(2)(3)15H 1.5 6.8 6 0.200 0.87 100 B 592D107(1)010B(2)(3)20H 2.0 10.0 14 0.400 0.45 100 C 592D107(1)010C(2)(3)20H 2.0 10.0 8 0.190 0.76 100 D 592D107(1)010D(2)(3)13H 1.3 10.0 8 0.100 1.10 100 D 592D107(1)010D(2)(3)15H 1.5 10.0 8 0.100 1.12 100 R 592D107(1)010R(2)(3)15H 1.5 10.0 6 0.220 0.83 150 C 592D157(1)010C(2)(3)15H 1.5 15.0 8 0.170 0.77 150 C 592D157(1)010C(2)(3)20H 2.0 15.0 8 0.170 0.80 150 D 592D157(1)010D(2)(3)15H 1.5 15.0 8 0.250 0.71 150 D 592D157(1)010D(2)(3)20H 2.0 15.0 8 0.140 1.00 220 D 592D227(1)010D(2)(3)19H 1.9 22.0 8 0.120 1.08 220 D 592D227(1)010D(2)(3)20H 2.0 22.0 8 0.120 1.08 220 R 592D227(1)010R(2)(3)20H 2.0 22.0 8 0.100 1.32 330 D 592D337(1)010D(2)(3)20H 2.0 33.0 8 0.100 1.18 330 R 592D337(1)010R(2)(3)20H 2.0 33.0 8 0.100 1.32 680 X 592D687(1)010X(2)(3)20H 2.0 100.0 15 0.070 1.58 4.7 A 592D475(1)016A(2)(3)15H 1.5 0.8 6 3.500 0.13 6.8 A 592D685(1)016A(2)(3)15H 1.5 1.1 6 3.300 0.13 6.8 B 592D685(1)016B(2)(3)15H 1.5 1.1 6 1.800 0.21 10 B 592D106(1)016B(2)(3)15H 1.5 1.6 6 1.600 0.22 10 C 592D106(1)016C(2)(3)15H 1.5 1.6 6 1.000 0.32 16 VDC AT + 85 °C; 10 VDC AT + 125 °C 15 B 592D156(1)016B(2)(3)15H 1.5 2.4 6 1.400 0.24 15 C 592D156(1)016C(2)(3)15H 1.5 2.4 6 1.300 0.28 Note • Part number definitions: (1) Tolerance: For 10 % tolerance, specify “X9”; for 20 % tolerance, change to “X0” (2) Termination: For 100 % tin specify “2”, for gold plated specify “4”, for solder plated 60/40 specify “8” (3) Packaging code: For 7" reels specify “T", for 13" reels specify “W” Revision: 25-Jun-13 Document Number: 40004 5 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 592D www.vishay.com Vishay Sprague STANDARD RATINGS CAPACITANCE CASE (μF) CODE HEIGHT MAX. (mm) PART NUMBER MAX. DCL AT + 25 °C (μA) MAX. DF AT + 25 °C 120 Hz (%) MAX. ESR AT + 25 °C 100 kHz () MAX. RIPPLE 100 kHz IRMS (A) 16 VDC AT + 85 °C; 10 VDC AT + 125 °C 15 D 592D156(1)016D(2)(3)15H 1.5 2.4 6 0.500 0.50 22 B 592D226(1)016B(2)(3)20H 2.0 3.5 6 0.600 0.37 22 C 592D226(1)016C(2)(3)15H 1.5 3.5 6 0.300 0.58 22 D 592D226(1)016D(2)(3)15H 1.5 3.5 6 0.400 0.56 33 B 592D336(1)016B(2)(3)20H 2.0 5.3 6 0.600 0.37 33 C 592D336(1)016C(2)(3)15H 1.5 5.3 6 0.250 0.63 33 D 592D336(1)016D(2)(3)15H 1.5 5.3 6 0.300 0.65 33 R 592D336(1)016R(2)(3)15H 1.5 5.3 6 0.270 0.75 47 B 592D476(1)016B(2)(3)20H 2.0 7.5 6 0.720 0.33 47 C 592D476(1)016C(2)(3)16H 1.6 7.5 6 0.250 0.63 47 C 592D476(1)016C(2)(3)20H 2.0 7.5 6 0.250 0.66 47 R 592D476(1)016R(2)(3)15H 1.5 7.5 6 0.250 0.77 68 C 592D686(1)016C(2)(3)12H 1.2 10.9 6 0.500 0.43 68 C 592D686(1)016C(2)(3)15H 1.5 10.9 6 0.500 0.45 68 C 592D686(1)016C(2)(3)20H 2.0 10.9 6 0.250 0.66 68 D 592D686(1)016D(2)(3)20H 2.0 10.9 6 0.170 0.91 100 C 592D107(1)016C(2)(3)20H 2.0 16.0 8 0.150 0.86 100 C 592D107(1)016C(2)(3)20H 2.0 16.0 8 0.150 0.86 100 D 592D107(1)016D(2)(3)15H 1.5 16.0 8 0.150 0.91 100 D 592D107(1)016D(2)(3)20H 2.0 16.0 8 0.150 0.97 150 D 592D157(1)016D(2)(3)20H 2.0 24.0 8 0.100 1.18 150 R 592D157(1)016R(2)(3)20H 2.0 24.0 8 0.100 1.32 220 R 592D227(1)016R(2)(3)20H 2.0 35.2 10 0.120 1.21 2.2 A 592D225(1)020A(2)(3)15H 1.5 0.5 6 6.000 0.10 20 VDC AT + 85 °C; 13 VDC AT + 125 °C 4.7 A 592D475(1)020A(2)(3)15H 1.5 0.9 6 3.800 0.13 4.7 B 592D475(1)020B(2)(3)15H 1.5 0.9 6 3.200 0.16 6.8 B 592D685(1)020B(2)(3)15H 1.5 1.4 6 3.100 0.16 6.8 C 592D685(1)020C(2)(3)15H 1.5 1.4 6 1.100 0.30 0.16 10 B 592D106(1)020B(2)(3)15H 1.5 2.0 6 3.000 10 C 592D106(1)020C(2)(3)15H 1.5 2.0 6 1.300 0.28 10 D 592D106(1)020D(2)(3)15H 1.5 2.0 6 0.500 0.50 15 C 592D156(1)020C(2)(3)15H 1.5 3.0 6 0.600 0.41 15 D 592D156(1)020D(2)(3)15H 1.5 3.0 6 1.260 0.31 15 R 592D156(1)020R(2)(3)15H 1.5 3.0 6 0.400 0.61 22 B 592D226(1)020B(2)(3)20H 2.0 4.4 6 0.600 0.37 22 D 592D226(1)020D(2)(3)15H 1.5 4.4 6 0.400 0.56 22 R 592D226(1)020R(2)(3)15H 1.5 4.4 6 0.280 0.73 33 R 592D336(1)020R(2)(3)15H 1.5 6.6 6 0.280 0.73 100 R 592D107(1)020R(2)(3)20H 2.0 20.0 10 0.200 1.32 Note • Part number definitions: (1) Tolerance: For 10 % tolerance, specify “X9”; for 20 % tolerance, change to “X0” (2) Termination: For 100 % tin specify “2”, for gold plated specify “4”, for solder plated 60/40 specify “8” (3) Packaging code: For 7" reels specify “T", for 13" reels specify “W” Revision: 25-Jun-13 Document Number: 40004 6 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 592D www.vishay.com Vishay Sprague STANDARD RATINGS CAPACITANCE CASE (μF) CODE HEIGHT MAX. (mm) PART NUMBER MAX. DCL AT + 25 °C (μA) MAX. DF AT + 25 °C 120 Hz (%) MAX. ESR AT + 25 °C 100 kHz () MAX. RIPPLE 100 kHz IRMS (A) 25 VDC AT + 85 °C; 17 VDC AT + 125 °C 2.2 A 592D225(1)025A(2)(3)15H 1.5 0.6 6 8.000 0.09 2.2 B 592D225(1)025B(2)(3)15H 1.5 0.6 6 6.000 0.12 3.3 B 592D335(1)025B(2)(3)15H 1.5 0.8 6 5.600 0.12 3.3 C 592D335(1)025C(2)(3)15H 1.5 0.8 6 2.000 0.22 4.7 C 592D475(1)025C(2)(3)15H 1.5 1.2 6 1.600 0.25 6.8 C 592D685(1)025C(2)(3)15H 1.5 1.7 6 1.300 0.28 6.8 D 592D685(1)025D(2)(3)15H 1.5 1.7 6 1.300 0.31 10 B 592D106X0025B(2)(3)15H 1.5 2.5 6 2.000 0.20 10 D 592D106(1)025D(2)(3)15H 1.5 2.5 6 1.200 0.32 10 R 592D106(1)025R(2)(3)15H 1.5 2.5 6 0.480 0.56 15 R 592D156(1)025R(2)(3)15H 1.5 3.8 6 0.400 0.61 33 C 592D336(1)025C(2)(3)16H 1.6 8.3 6 0.400 0.50 33 C 592D336(1)025C(2)(3)20H 2.0 8.3 6 0.400 0.52 68 R 592D686(1)025R(2)(3)20H 2.0 17.0 8 0.230 0.87 1.0 A 592D105(1)035A(2)(3)15H 1.5 0.5 4 10.000 0.08 1.0 B 592D105(1)035B(2)(3)15H 1.5 0.5 4 6.500 0.11 1.5 B 592D155(1)035B(2)(3)15H 1.5 0.5 4 4.200 0.14 2.2 B 592D225(1)035B(2)(3)15H 1.5 0.8 6 6.000 0.12 2.2 C 592D225(1)035C(2)(3)15H 1.5 0.8 6 3.500 0.17 3.3 C 592D335(1)035C(2)(3)15H 1.5 1.2 6 3.200 0.18 3.3 D 592D335(1)035D(2)(3)15H 1.5 1.2 6 2.100 0.24 0.22 35 VDC AT + 85 °C; 23 VDC AT + 125 °C 4.7 B 592D475(1)035B(2)(3)15H 1.5 1.6 6 1.600 4.7 C 592D475(1)035C(2)(3)15H 1.5 1.6 6 2.800 0.19 4.7 D 592D475(1)035D(2)(3)15H 1.5 1.6 6 1.800 0.26 0.34 4.7 R 592D475(1)035R(2)(3)15H 1.5 1.6 6 1.300 6.8 D 592D685(1)035D(2)(3)15H 1.5 2.4 6 1.300 0.31 6.8 R 592D685(1)035R(2)(3)15H 1.5 2.4 6 1.200 0.35 10 R 592D106(1)035R(2)(3)15H 1.5 3.5 6 1.200 0.35 50 VDC AT + 85 °C; 33 VDC AT + 125 °C 1.0 B 592D105(1)050B(2)(3)15H 1.5 0.8 6 6.500 0.11 2.2 C 592D225(1)050C(2)(3)15H 1.5 1.1 6 0.800 0.35 3.3 C 592D335(1)050C(2)(3)15H 1.5 1.7 6 0.800 0.35 4.7 C 592D475(1)050C(2)(3)20H 2.0 2.4 6 0.800 0.37 4.7 R 592D475(1)050R(2)(3)15H 1.5 2.4 6 0.700 0.50 6.8 R 592D685(1)050R(2)(3)15H 1.5 3.4 6 0.700 0.50 10 R 592D106(1)050R(2)(3)20H 2.0 5.0 6 0.700 0.50 Note • Part number definitions: (1) Tolerance: For 10 % tolerance, specify “X9”; for 20 % tolerance, change to “X0” (2) Termination: For 100 % tin specify “2”, for gold plated specify “4”, for solder plated 60/40 specify “8” (3) Packaging code: For 7" reels specify “T", for 13" reels specify “W” Revision: 25-Jun-13 Document Number: 40004 7 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 592D www.vishay.com Vishay Sprague RECOMMENDED VOLTAGE DERATING GUIDELINES (for temperatures below + 85 °C) STANDARD CONDITIONS. FOR EXAMPLE: OUTPUT FILTERS Capacitor Voltage Rating Operating Voltage 4.0 2.5 6.3 3.6 10 6.0 16 10 20 12 25 15 35 24 50 28 SEVERE CONDITIONS. FOR EXAMPLE: INPUT FILTERS Capacitor Voltage Rating Operating Voltage 4.0 2.5 6.3 3.3 10 5.0 16 8.0 20 10 25 12 35 15 50 24 CASE CODE/PART NUMBER X-REF OLD Revision: 25-Jun-13 NEW A2_ A2_15H B2_ B2_15H C2_ C2_15H D2_ D2_15H R2_ R2_15H S2_ S2_13H T2_ B2_20H U2_ C2_20H V2_ D2_20H W2_ R2_20H X2_ X2_20H Y2_ X2_25H Document Number: 40004 8 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 592D www.vishay.com Vishay Sprague TYPICAL CURVES AT + 25 °C, IMPEDANCE AND ESR VS. FREQUENCY “A” CASE “B” CASE 10 000 10 000 IMPEDANCE 1000 IMPEDANCE 1000 ESR 100 4.7 µF, 20 V Ω Ω 100 ESR 1 µF, 35 V 10 10 15 µF, 6.3 V 1 1 10 µF, 10 V 0.1 100 Hz 1 kHz 10 kHz 100 kHz 0.1 100 Hz 1 MHz 1 kHz FREQUENCY 10 kHz 100 kHz 1 MHz FREQUENCY “C” CASE “D” CASE 10 000 1000 IMPEDANCE 1000 IMPEDANCE 100 ESR 100 ESR 10 Ω Ω 4.7 µF, 25 V 10 1 6.8 µF, 25 V 1 0.1 47 µF, 6.3 V 33 µF, 6.3 V 0.1 100 Hz 1 kHz 10 kHz 100 kHz 1 MHz 0.01 100 Hz 1 kHz FREQUENCY 10 kHz 100 kHz 1 MHz FREQUENCY “R” CASE “S” CASE 1000 1000 IMPEDANCE 100 IMPEDANCE 100 ESR Ω 10 Ω 10 ESR 1 33 µF, 6.3 V 1 10 µF, 25 V 0.1 0.1 100 µF, 6.3 V 0.01 100 Hz 1 kHz 10 kHz FREQUENCY Revision: 25-Jun-13 100 kHz 1 MHz 0.01 100 Hz 1 kHz 10 kHz 100 kHz 1 MHz FREQUENCY Document Number: 40004 9 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 592D www.vishay.com Vishay Sprague TYPICAL CURVES AT + 25 °C, IMPEDANCE AND ESR VS. FREQUENCY 592D 1500-4 V X/20H CASE 592D 1500-6.4 V X/25H CASE 10 10 IMPEDANCE IMPEDANCE ESR ESR Ω 1 Ω 1 0.1 0.1 0.01 100 Hz 1 kHz 10 kHz 100 kHz 1 MHz 10 MHz 0.01 100 Hz 1 kHz 10 kHz FREQUENCY 100 kHz 1 MHz 10 MHz FREQUENCY 592D 1000-6.3 V X/20H CASE 592D 2200-4 V X/25H CASE 10 10 IMPEDANCE IMPEDANCE ESR ESR Ω 1 Ω 1 0.1 0.1 0.01 100 Hz 1 kHz 10 kHz 100 kHz 1 MHz 10 MHz 0.01 100 Hz 1 kHz 10 kHz FREQUENCY 100 kHz 1 MHz 10 MHz FREQUENCY POWER DISSIPATION CASE CODE HEIGHT MAXIMUM PERMISSIBLE POWER DISSIPATION AT + 25 °C (W) IN FREE AIR A 10H 0.050 A 12H 0.055 A 13H 0.055 A 15H 0.060 B 12H 0.075 B 13H 0.075 B 15H 0.080 B 20H 0.085 C 12H 0.095 C 14H 0.100 C 15H 0.100 C 16H 0.100 C 18H 0.110 C 20H 0.110 D 13H 0.120 Revision: 25-Jun-13 Document Number: 40004 10 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 592D www.vishay.com Vishay Sprague POWER DISSIPATION CASE CODE HEIGHT MAXIMUM PERMISSIBLE POWER DISSIPATION AT + 25 °C (W) IN FREE AIR D 14H 0.120 D 15H 0.125 D 16H 0.130 D 19H 0.140 D 20H 0.140 M 20H 0.175 R 12H 0.135 R 15H 0.150 R 16H 0.155 R 20H 0.175 R 22H 0.185 S 12H 0.060 X 16H 0.170 X 20H 0.175 X 21H 0.175 X 22H 0.175 X 25H 0.180 STANDARD PACKAGING QUANTITY CASE CODE HEIGHT A UNITS PER REEL 7" REEL 13" REEL Any 2500 10 000 B Any 2000 8000 C Any 1000 4000 D Any 1000 4000 M 20H 1000 2500 R 12H; 15H 1000 4000 R 16H; 18H; 20H 1000 2500 S 12H 2500 10 000 X Any 500 n/a PRODUCT INFORMATION Conformal Coated Guide Pad Dimensions www.vishay.com/doc?40150 Packaging Dimensions Moisture Sensitivity www.vishay.com/doc?40135 SELECTOR GUIDES Solid Tantalum Selector Guide www.vishay.com/doc?49053 Solid Tantalum Chip Capacitors www.vishay.com/doc?40091 FAQ Frequently Asked Questions Revision: 25-Jun-13 www.vishay.com/doc?40110 Document Number: 40004 11 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000