PSQLF100 SERIES 96 Watt, AC/DC LED Switching Power Supplies Rev A Wall Industries, Inc. FEATURES • RoHS Compliant • 96 Watts Maximum Output Power • PFC Function, PF>0.9 • 90~295VAC Input Voltage Range • Single Outputs • Short Circuit, Over Voltage, and Over Load Protection • Double Layered PCB • Constant Current (CC) & Constant Voltage (CV) Modes • Free Air Convection • UL8750, IEC/EN 61347-2-13, & IEC/EN 61347-1 Approvals • Up to 90% High Efficiency • IP66/67 Design for Indoor or Outdoor LED Installations DESCRIPTION IP66/67 The PSQLF100 series of AC/DC LED switching power supplies provides a maximum power rating of 96W in a 4.76” x 2.36” x 1.38” fully isolated plastic case. These supplies meet IP66/67 waterproof standards, which makes them suitable for harsh environments in industrial or commercial outdoor lighting applications. The PSQLF100 series consists of single output models with an input voltage range of 90-295VAC. Some features include high efficiency up to 90%, power factor > 0.9, and short circuit, over voltage, and over load protection. The PSQLF100 series has both constant current (CC) and constant voltage (CV) modes and is suitable for LED lighting applications. This series is also RoHS compliant and has UL8750, IEC/EN 61347-1, and IEC/EN 61347-2-13 safety approvals. E347942 LEVEL3 Size: 4.76 x 2.36 x 1.38 inches 120.9 x 60.0 x 35.0 mm MODEL SELECTION TABLE IP66 RATED MODELS Model Number Input Voltage Range PSQLF100-24S-IP66 PSQLF100-36S-IP66 90 ~ 295 VAC PSQLF100-48S-IP66 PSQLF100-54S-IP66 24 VDC (15.6~24 VDC) Min 2.6 A Output Current Current Adj. Range 3.5 A (2.6~4.0 A) 36 VDC (23.4~36 VDC) 1.72 A 2.1 A (1.72~2.65 A) Output Voltage (2) Output Power Ripple & Noise (1) Efficiency 96 W 2.7Vp-p 89% 96 W 5Vp-p 90% 48 VDC (31.2~48 VDC) 1.3 A 1.75 A (1.3~2.0 A) 96 W 5Vp-p 89% 54 VDC (35.1~54 VDC) 1.15 A 1.4 A (1.15~1.77 A) 95.6 W 5Vp-p 90% Output Power Ripple & Noise (1) Efficiency IP67 RATED MODELS Model Number Input Voltage Range Output Voltage (2) Output Current Preset Current (fixed) 3.5 A (2.6~4.0 A) PSQLF100-24S-IP67 24 VDC (15.6~24 VDC) Min 2.6 A 96 W 2.7Vp-p 89% PSQLF100-36S-IP67 36 VDC (23.4~36 VDC) 1.72 A 2.1 A (1.72~2.65 A) 96 W 5Vp-p 90% 48 VDC (31.2~48 VDC) 1.3 A 1.75 A (1.3~2.0 A) 96 W 5Vp-p 89% 54 VDC (35.1~54 VDC) 1.15 A 1.4 A (1.15~1.77 A) 95.6 W 5Vp-p 90% 90 ~ 295 VAC PSQLF100-48S-IP67 PSQLF100-54S-IP67 NOTES 1. Measured at 20MHz bandwidth and with 0.1µF and 47µF capacitors in parallel. 2. Input Voltage = 115VAC or 230VAC. This is suitable operation region for LED related applications but please reconfirm special electrical requirements for some specific system designs. BLOCK DIAGRAM I/P EMI FILTER & RECTIFIERS POWER SWITCHING O.L.P. FG 08/16/2013 FILTER & RECTIFIERS +V -V DETECTION CIRCUIT PWM CONTROL O.C.P. Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 1 of 4 Rev A Wall Industries, Inc. PSQLF100 SERIES 96 Watt, AC/DC LED Switching Power Supplies SPECIFICATIONS: PSQLF100 SERIES All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS INPUT SPECIFICATIONS Input Voltage Input Frequency See derating curve Inrush Current Power Factor OUTPUT SPECIFICATIONS Output Voltage Voltage Adjustment Setup (CV Mode) Constant Current Operation Voltage (CC Mode) PSQLF100-24S PSQLF100-36S PSQLF100-48S PSQLF100-54S PSQLF100-24S PSQLF100-36S PSQLF100-48S PSQLF100-54S Preset Current (CC Mode) IP66 Models Current Adj. Range (CC Mode) IP66 Models Preset Current (fixed) (CC Mode) IP67 Models Minimum Load Line Regulation Load Regulation Output Power Ripple & Noise Temperature Coefficient PROTECTION Short Circuit Protection Over Voltage Protection Over Current Protection GENERAL SPECIFICATIONS Efficiency Isolation Voltage Leakage Current ENVIRONMENTAL SPECIFICATIONS Operating Temperature Storage Temperature Humidity Cooling MTBF PHYSICAL SPECIFICATIONS Weight Dimensions (L x W x H) SAFETY & EMC Safety Approvals EMI (Conducted and Radiated Emissions) EMS (Noise Immunity) Harmonic Current Surge 08/16/2013 110~240 VAC Min load to max load 0~50°C Max Unit 295 VAC Hz 50/60 1.4 0.7 A 60 A 0.9 See Note 2 Voltage Tolerance PSQLF100-24S PSQLF100-36S PSQLF100-48S PSQLF100-54S PSQLF100-24S PSQLF100-36S PSQLF100-48S PSQLF100-54S PSQLF100-24S PSQLF100-36S PSQLF100-48S PSQLF100-54S Typ 90 At 115 VAC and full load At 230 VAC and full load At 230 VAC At 115/230 VAC and full load Input Current Min 22 33 44 49 15.6 23.4 31.2 35.1 -10 At 230 VAC At 230 VAC At 230 VAC 2.6 1.72 1.3 1.15 2.6 1.72 1.3 1.15 -4 -5 -0.02 See Table 26.5 39.5 51.5 55 24 36 48 54 +10 3.5 2.1 1.75 1.4 4.0 2.65 2.0 1.77 3.5 4.0 2.1 2.65 1.75 2.0 1.4 1.77 See Table +4 +5 See Table See Table +0.02 VDC VDC % A A A % % %/°C auto-recovery Zener diode clamp auto-recovery At 230 VAC and full load Input to Output Input to FG Output to FG At 240 VAC With derating (see derating curve) 25°C (MIL-HDBK-217F) See Table 3750 1880 500 VAC 0.7 -30 -40 +70 +85 95 Free air convection 450,000 mA °C °C % RH hours 1.32 lbs (600g) 4.76 x 2.36 x 1.38 inches (120.9 x 60.0 x 35.0 mm) UL8750, IEC / EN 61347-2-13, IEC / EN 61347-1 EN 55015 EN61547 EN61000-3-2 (at full load), EN 61000-3-3 2KV (L-N), 4KV (L N – FG) Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 2 of 4 PSQLF100 SERIES 96 Watt, AC/DC LED Switching Power Supplies Rev A Wall Industries, Inc. DERATING CURVES Load vs Ambient Temperature 120 Load vs Input Voltage 120 Others Under 120VAC 100 80 Load (%) Load (%) 80 60 50% 60 40 40 20 20 0 -30 -20 Ta=25°C 100 0 20 40 45 0 60 70 80 90 100 135 Ambient Temperature (°C) 155 230 264 295 Input Voltage (VAC) Note: If the output is not connected to LEDs, the input voltage must be greater than 180VAC MECHANICAL DRAWING IP 66 MODELS Unit: inches (mm) 5.23 (132.9) 4.76 (120.9) Assembly Instructions: 1. U Case T=0.08” (2.0mm) 2. Do not screw higher than 0.02” (0.5mm) into the length of the case 3. Screw length for load plate thickness plus 0.1” (2.5mm) (Red) +V AC/N (Blue) (Black) -V FG (Green/Yellow) 2.36 (60.0) AC/L (Brown) Vo ADJ. Io ADJ. 11.81±0.8 (300.0±20.0) 11.81±0.8 (300.0±20.0) 1.38 (35.0) Tolerance: 0.08” (2.0mm) IP67 MODELS Unit: inches (mm) 5.23 (132.9) 4.76 (120.9) Assembly Instructions: 1. U Case T=0.08” (2.0mm) 2. Do not screw higher than 0.02” (0.5mm) into the length of the case 3. Screw length for load plate thickness plus 0.1” (2.5mm) (Red) +V AC/N (Blue) (Black) -V FG (Green/Yellow) 2.36 (60.0) AC/L (Brown) 11.81±0.8 (300.0±20.0) 11.81±0.8 (300.0±20.0) 1.38 (35.0) Tolerance: 0.08” (2.0mm) 08/16/2013 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 3 of 4 Wall Industries, Inc. Rev A PSQLF100 SERIES 96 Watt, AC/DC LED Switching Power Supplies COMPANY INFORMATION Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008 certification is just one example of our commitment to producing a high quality, well-documented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone: Toll Free: Fax: E-mail: Web: Address: 08/16/2013 (603)778-2300 (888)597-9255 (603)778-9797 [email protected] www.wallindustries.com 37 Industrial Drive Exeter, NH 03833 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 4 of 4