DTAIM105A SERIES 95-105 Watts AC DC Desktop Power Supplies Single Output Rev A Size: 5.52in x 2.48in x 1.23in (140mm x 63mm x 32mm) OPTIONS • Output Voltage • Output Cable FEATURES • • • • • • Single Outputs • AC Inlet: IEC320-C8 • Universal Input Voltage Range of 90-264VAC • ITE & Medical Safety Approvals • Output Voltage Ranging from 12V to 48V • Short Circuit, Over Load, and Over Voltage • Protection High Efficiency Over 89% Energy Level VI Compliant EU Tier 2 Efficiency Compliant RoHS Compliant Low Leakage Current <100µA UL/c-UL, UL60601-1, TUV EN60601-1, CB IEC60601-1, UL/c-UL UL60950-1, TUV EN60950-1, and CB IEC60950-1 Safety Approvals DESCRIPTION The DTAIM105A series of AC DC desktop power supplies offers up to 105 watts of output power in a 5.52” x 2.48” x 1.3” package. This series consists of single output models with a universal input range of 90-264VAC and output voltages ranging from 12V to 48V. All models are Energy Level VI, EU Tier 2 Efficiency, and RoHS compliant. This series has short circuit, over load, and over voltage protection and also has UL/c-UL, UL60601-1, TUV EN60601-1, CB IEC60601-1, UL/c-UL UL60950-1, TUV EN60950-1, and CB IEC60950-1 safety approvals. Optional output cables are available per customer’s request. This is a preliminary model. Please call factory for order details. MODEL SELECTION TABLE Model Number DTAIM095A-1Y120N DTAIM0100A-1Y150N DTAIM105A-1Y190N DTAIM105A-1Y240N DTAIM105A-1Y280N DTAIM105A-1Y360N DTAIM105A-1Y480N 2/5/2016 Input Voltage Range Output Voltage Output Current Ripple & Noise(1) Output Power Efficiency Level 90-264VAC 12V 15V 19V 24V 28V 36V 48V 8.00A 6.70A 5.60A 4.45A 3.80A 2.95A 2.20A 150mV 150mV 190mV 240mV 280mV 360mV 480mV 95W 100W 105W 105W 105W 105W 105W VI VI VI VI VI VI VI Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 1 of 4 DTAIM105A SERIES 95-105 Watts AC DC Desktop Power Supplies Single Output Rev A SPECIFICATIONS All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS INPUT SPECIFICATIONS Input Voltage Range Input Frequency Min @90VAC @264VAC @115VAC, cold start, @25ºC @230VAC, cold start, @25ºC @115VAC @Full Load @230VAC @Full Load Input Current (rms) Inrush Current Power Factor Max Unit 90 264 VAC 47 63 2.5 1.25 50 100 Hz 12V, 15V, and 19V models 24V, 28V, 36V, and 48V models -5 -3 Output Power Output Current Ripple & Noise(1) Hold-Up Time @Full Load, 115VAC PROTECTION Short Circuit Protection Over Load Protection Over Voltage Protection ENVIRONMENTAL SPECIFICATIONS Operating Temperature Derate linearly 2.5% per ºC from 41 to 60ºC Storage Temperature MTBF GENERAL SPECIFICATIONS Efficiency Leakage Current No Load Power Consumption PHYSICAL SPECIFICATIONS Weight A A peak 0.95 0.90 OUTPUT SPECIFICATIONS Output Voltage Regulation Typ See Table +5 +3 See Table See Table See Table >10 % ms Automatic Recovery Automatic Recovery Shutdown and Latch Off, AC Recycle @Full Load and 25ºC ambient temperature @Average Load, 115/230VAC 0 +60 ºC -20 100,000 +85 ºC Hours 89 % µA mW 100 150 1.72 lbs (0.78kgs) 5.5in x 2.48in x 1.26in (140mm x 63mm x 32mm) IEC320-C8 Dimensions (L x W x H) AC Inlet SAFETY & EMC CHARACTERISTICS UL/cUL UL60601-1 TUV EN60601-1 CB IEC60601-1 UL/c-UL UL60950-1 TUV EN60950-1 CB IEC 60950-1 EN60601-1-2 FCC Part 18 EN55011 EN55022 EN55024 FCC Part 15 CE Safety Standards EMC Standards Class B Class B Class B Class B Class B NOTES (1) 2/5/2016 Ripple and noise is measured at oscilloscope 20MHz bandwidth by a 10µF electrolytic capacitor and a 0.1µF ceramic capacitor in parallel at output connector. Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 2 of 4 Rev A DTAIM105A SERIES 95-105 Watts AC DC Desktop Power Supplies Single Output MECHANICAL DRAWINGS Notes: 1. 2. 3. 4. AC Inlet: IEC320-C8 Plastic Case Color: Black Tolerance: ±0.5mm Unit: mm STANDARD OUTPUT CABLE 1. AWM 1571 #14 AWG/1C + SHIELDING, UL 80ºC 30V VW-1, 1000 mm. (12-24V) 2. AWM 1185 #16AWG/1C + SHIELDING, UL 80ºC 300V VW-1, 1000 mm. (36-48V) 3. Depends on Customer Requirements 2/5/2016 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 3 of 4 Rev A DTAIM105A SERIES 95-105 Watts AC DC Desktop Power Supplies Single Output COMPANY INFORMATION Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008 certification is just one example of our commitment to producing a high quality, well-documented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone: Toll Free: Fax: E-mail: Web: Address: 2/5/2016 (603)778-2300 (888)597-9255 (603)778-9797 [email protected] www.wallindustries.com 37 Industrial Drive Exeter, NH 03833 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 4 of 4