SGC121B2S

SGC121B2S
Surface Mount Schottky Rectifier
Reverse Voltage 120V Forward Current 12A
Features
•
•
•
•
•
•
•
•
•
Heatsink design
Schottky barrier diodes
Low forward voltage drop
Low leakage current
Moisture sensitivity: level 1, per J-STD-020
Solder dip 260 °C, 10 s
Low profile - typical height of 1.1 mm
High temperature soldering guaranteed: 260℃/10 seconds
Halogen-free according to IEC 61249-2-21 definition
eSGC (TO-277)
Anode 1
Cathode
& Heatsink
Anode 2
Typical Applications
For low voltage high frequency inverters, DC/DC converters and polarity protection application.
Maximum Ratings
(TA = 25 °C unless otherwise noted)
Parameter
Symbol
SGC121B2S
Unit
Maximum repetitive peak reverse voltage
VRRM
120
V
Maximum RMS voltage
VRMS
84
V
VDC
120
V
Maximum DC blocking voltage
6.01)
Maximum average forward rectified current
IF(AV)
Peak forward surge current 8.3 ms single
half sine-wave superimposed on rated load
IFSM
220
A
Operating junction and storage temperature
range
TJ, TSTG
-55 to +150
°C
Electrical Characteristics
Parameter
(TA = 25 °C unless otherwise noted)
Test Conditions
Symbol
IF=1A
IF=2A
IF=5A
Maximum instantaneous forward voltage
TA=25℃
IF=12A
VF
IF=1A
IF=2A
IF=5A
TA=125℃
IF=12A
Maximum DC reverse current at rated DC
blocking voltage
Typical junction capacitance
Typical thermal resistance
Rated VR
A
12.02)
TA=25℃
IR
TA=125℃
TYP.
MAX.
0.39
0.45
0.43
0.49
0.52
0.60
0.68
0.75
0.27
-
0.34
-
0.46
-
0.58
-
0.018
0.2
11.3
30
4.0 V, 1 MHz
CJ
1179
juntion to lead
RθJL2)
3
juntion to ambient
RθJA1)
27
Unit
Volts
mA
pF
℃/W
Note1)Mounted on FR-4 P.C.B with 30*30mm copper pad area
2)On aluminum substrate PCB with recommended copper pad area
www.goodark.com
1/4
2015.08-Rev.A
SGC121B2S
Surface Mount Schottky Rectifier
Reverse Voltage 120V Forward Current 12A
Ratings and Characteristics Curves
Average Forward Rectified
Current, (A)
(TA = 25℃ unless otherwise noted)
14
12
On aluminum
substrate PCB
10
8
On a FR-4 PCB with
30*30mm copper pad
6
4
2
0
0
25 50 75 100 125 150
Lead temperature(℃)
Figure 2.Maximum Non-Repetitive Peak
Forward Surge Current
Figure 1.Forward Current Derating Curve
Figure 3. Typical Reverse Characteristics
Figure 4. Typical Instantaneous Forward
Characteristics
Figure 5. Typical Junction Capacitance
www.goodark.com
2/4
2015.08-Rev.A
SGC121B2S
Surface Mount Schottky Rectifier
Reverse Voltage 120V Forward Current 12A
Package Outline Dimensions
DIM
HE
E
D
B1
B2
A
C
L
L1
L2
L3
D1
E1
Unit: mm
Unit: inch
MIN MAX
6.4
6.6
5.6
5.8
4.1
4.3
1.7
1.9
0.8
1
1.05
1.2
0.3
0.4
0.85
1.1
4.2
4.4
3.52 Typ.
1.1
1.4
3
3.3
1.86 Typ.
MIN MAX
0.252 0.260
0.220 0.228
0.161 0.169
0.067 0.075
0.031 0.039
0.041 0.047
0.012 0.016
0.033 0.043
0.165 0.173
0.139 Typ.
0.043 0.055
0.118 0.130
0.073 Typ.
Soldering footprint
Packing Information
Packing quantities:
5000 pcs/Reel,12mm Tape, 13" Reel
Tape & Reel Specification
www.goodark.com
3/4
2015.08-Rev.A
SGC121B2S
Surface Mount Schottky Rectifier
Reverse Voltage 120V Forward Current 12A
Disclaimers
These materials are intended as a reference to assist our customers in the selection of the Suzhou
Good-Ark product best suited to the customer’s application; they do not convey any license under any
intellectual property rights, or any other rights, belonging to Suzhou Good-Ark Electronics Co., Ltd.or a
third party.
Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, or infringement of
any third-party ’ s rights, originating in the use of any product data, diagrams, charts, programs,
algorithms, or circuit application examples contained in these materials.
All information contained in these materials, including product data, diagrams, charts, programs and
algorithms represents information on products at the time of publication of these materials, and are
subject to change by Suzhou Good-Ark Electronics Co., Ltd. without notice due to product improvements
or other reasons. It is therefore recommended that customers contact Suzhou Good-Ark Electronics Co.,
Ltd. or an authorized Suzhou Good-Ark Electronics Co., Ltd. for the latest product information before
purchasing a product listed herein. The information described here may contain technical inaccuracies or
typographical errors. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage,
liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information
published by Suzhou Good-Ark Electronics Co., Ltd. by various means, including our website home
page.
(http://www.goodark.com)
When using any or all of the information contained in these materials, including product data, diagrams,
charts, programs, and algorithms, Please be sure to evaluate all information as a total system before
making a final decision on the applicability of the information and products. Suzhou Good-Ark Electronics
Co., Ltd. assumes no responsibility for any damage, liability or other loss resulting from the information
contained herein.
The prior written approval of Suzhou Good-Ark Electronics Co., Ltd. is necessary to reprint or reproduce
in whole or in part these materials.
Please contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized distributor for further details on
these materials or the products contained herein.
www.goodark.com
4/4
2015.08-Rev.A