SGC0301A thru SGC0307A Surface Mount Glass Passivated Rectifier Reverse Voltage 50~1000V Forward Current 3A Features • • • • • • Glass passivated standard rectifiers Ideal for automated placement Low forward voltage drop Moisture sensitivity: level 1, per J-STD-020 Solder dip 260 °C, 10 s Low profile - typical height of 1.1 mm eSGC ((TO‐277) ) Anode Cathode & Heatsink Anode 2 Typical Applications For use of general purpose rectification in lighting lighting, cellular phone phone, portable device device, power supplies, and other consumer applications. Maximum Ratings (TA = 25 °C unless otherwise noted) Parameter Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Symbol SGC0301 A SGC0302 A SGC0303 A SGC0304 A SGC0305 A SGC0306 A SGC0307 Unit A VRRM 50 100 200 400 600 800 VRMS VDC 35 70 140 280 420 560 700 V 50 100 200 400 600 800 1000 V 1000 V Maximum average forward rectified current IF(AV) 3.0 A Peak forward surge current 8.3 ms single half sine-wave sine wave superimposed on rated load IFSM 80 A Operating junction and storage temperature range TJ, TSTG - 55 to + 150 °C Electrical Characteristics Parameter Test Conditions Symbol Maximum instantaneous forward IF=3 A ,TA=25℃ voltage VF Maximum DC reverse TA=25℃ current at rated DC blocking voltage TA=125℃ IR Typical reverse recovery time Typical junction capacitance Typical thermal 1) resistance IF=0.5A,IR=1.0A, (TA = 25 °C unless otherwise noted) SGC0301 A SGC0302 A SGC0303 A SGC0304 A 1.1 SGC0305 A SGC0306 A SGC0307 A Unit Volts 10 µA 250 trr 3 uS CJ 25 pF juntion to mount RθJM 5 juntion to ambient RθJA 35 Irr=0.25A 4.0 V, 1 MHz ℃/W Notes: 1)Thermal resistance RθJM is junction to mount.Mounted on P.C.B with 30*30mm copper pad area www.goodark.com 1/4 2015.07-Rev.A SGC0301A thru SGC0307A Surface Mount Glass Passivated Rectifier Reverse Voltage 50~1000V Forward Current 3A Ratings and Characteristics Curves (TA = 25℃ unless otherwise noted) Peeak Forward Surge Cu urrent （A） 100 80 60 40 20 0 1 Figure 1. Typical Instantaneous Forward Characteristics 10 100 Number of Cycles at 60Hz Figure 2.Maximum Non‐Repetitive Peak Forward Surge Current Figure 3. Typical Reverse Characteristics Figure 4. Typical Junction Capacitance Average Forward Rectified Current, （A） 4 3 2 FR‐4 1 0 0 25 50 75 100 125 150 Lead temperature（℃） Figure 5.Forward Current Derating Curve www.goodark.com 2/4 2015.07-Rev.A SGC0301A thru SGC0307A Surface Mount Glass Passivated Rectifier Reverse Voltage 50~1000V Forward Current 3A Package Outline Dimensions Soldering footprint Packing Information Packing quantities: 5000 pcs/Reel，12mm Tape, 13" Reel Tape & Reel Specification www.goodark.com 3/4 2015.07-Rev.A SGC0301A thru SGC0307A Surface Mount Glass Passivated Rectifier Reverse Voltage 50~1000V Forward Current 3A Disclaimers These materials are intended as a reference to assist our customers in the selection of the Suzhou Good-Ark product best suited to the customer’s application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Suzhou Good-Ark Good Ark Electronics Co., Ltd.or a third party. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, or infringement of any third-party ’ s rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. All information contained in these materials, materials including product data, data diagrams, diagrams charts, charts programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Suzhou Good-Ark Electronics Co., Ltd. without notice due to product improvements or other reasons. It is therefore recommended that customers contact Suzhou GoodArk Electronics Co., Ltd. or an authorized Suzhou Good-Ark Electronics Co., Ltd. for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility ibilit for f any damage, d liability, li bilit or other th loss l rising i i f from these th inaccuracies i i or errors. Please Pl also pay attention to information published by Suzhou Good-Ark Electronics Co., Ltd. by various means, including our website home page. (http://www.goodark.com) When using any or all of the information contained in these materials, including product data, g p g g diagrams, charts, programs, and algorithms, Please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. The prior written approval of Suzhou Good-Ark Electronics Co., Ltd. is necessary to reprint or reproduce in whole or in part these materials. Please contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized distributor for further details on these materials or the products contained herein. www.goodark.com 4/4 2015.07-Rev.A